G5E22EA #A2N: unable to connect to the wifi network

Similar Questions

• Unable to connect to the WIFI network.

  Original title: Need computer help laptop to connect to the WiFi at home

  I have FIOS at home, but my new laptop is impossible to connect to the WIFI in my house, the diagnostic computer wasn't able to fix the problem, what can I do?

  Hello

  1. what exactly happens when you try to connect to the WIFI network?
  2. do you receive any error messages?

  Method 1:
  I suggest you try the procedure described in the article and see if it helps.

  Windows wireless and wired network connection problems
  http://Windows.Microsoft.com/en-us/Windows/help/wired-and-wireless-network-connection-problems-in-Windows

  Method 2:
  If the problem persists, you try the procedure described in the article and check out them.
  How to troubleshoot wireless network connections in Windows XP Service Pack 2
  http://support.Microsoft.com/kb/870702

  Alternatively, you can check the link for more information:

  Error message when you try to run the Network Setup Wizard update for Windows XP Service Pack 2, Service Pack 3, or Windows XP Tablet PC 2005 Edition wireless
  http://support.Microsoft.com/kb/871122

  Method 3:

  If the problem persists, you can temporarily disable the antivirus software and check.

  (a) click Startand then click run.

  (b) copy and Paste the following text in the box run command and then press enter:

  wscui.cpl

  (c) in the Windows Security window, click Virus Protection.

  (d) if the software is activated, display information about the antivirus program and note the name of the application.

  (e) click Start, click programs principally made and then look for and run the anti-virus program.

  (f) temporarily disable the software.

  Important note: Antivirus software can help protect your computer against viruses and other security threats. In most cases, you should not disable your antivirus software. If you need to disable temporarily to install other software, you must reactivate as soon as you are finished. If you are connected to the Internet or a network, while your antivirus software is disabled, your computer is vulnerable to attacks.

  I hope this information helps!

• Compaq presario c700-c795tu: unable to connect to the WiFi network with WPA2 encryption

  Hi team,

  I tried all the options in your post and I am still unable to connect to WiFi with WPA2-PSK encryption.

  I am currently using the adapter network driver atheros 5007 wireless.

  Some of the links in your message that resolved this issue earlier are currently unavailable.

  It would be great if you could help me to solve this issue.

  Concerning

  Roger

  Here is the patch for WPA2 for XP SP2...

  Install and reboot and then see if you're OK...

  http://www.Microsoft.com/en-US/Download/details.aspx?ID=1974

  That's the only reason why I can think that now prevents you from being able to connect on a network with WPA2 Personal Security.

• Reset the iPhone 6, unable to connect to the wifi network. Not accepting not a password when the password?

  I checked I'm put in the correct password, the first letter is capitalize. I check my other devices. Even contacted my ISP. It is the correct password, I entered. It circles as he wants to ACCEP. But then the message incorrect password.

  Dominionheiress,

  Try the steps listed in the following: If your iPhone, iPad or iPod touch connects to a Wi-Fi - Apple Support Network

  

• problem with WiFi connectivity with new Ipad Pro.  Unable to connect to the wifi at home.  My other devices (mini mac, iphone, iPad 2) all work fine on my wifi at home.  I am able to connect Ipad Pro wifi work.

  Problem with WiFi connectivity with new Ipad Pro.  Unable to connect to the wifi at home.  My other devices (mini mac, iphone, iPad 2) all work fine on my wifi at home.  I am able to connect Ipad Pro wifi work.

  On the Pro iPad, tap settings > general > reset > reset network settings

  You will need to re enter your Wi - Fi password.

  Then try to connect to your Wi - Fi network.

  If this does not help, more available in this support article suggestions > If your iPhone, iPad or iPod touch connects to a Wi-Fi network

• Satellite L650 - unable to connect to the public network (has no valid IP address)

  Hello

  Toshiba satellite L650 laptop computer (with windows 7 64-bit), I bought two days back and I'm unable to connect to the public network. Sometimes, it must be connected to the public network and after a few minutes it disconnects. I get the message "wireless network doesn't have a valid IP configuration him."

  I have visited many forums and did everything, but of no use.

  1. people with disabilities the tcp/ip V6 of the registry.
  2. the DHCP is enabled. With the help of the automatic IP (DHCP)
  3. also tried with a static IP configuration.
  4. uninstalled the antivirus provided with laptop computer (Norton).
  5 disabled the windows firewall.
  6. restored to factory settings.

  I called Toshiba Tech support as well and they have suggested that it may be a problem of H/W but I don't think that so that it can be hardware problem because sometimes he must be connected to the public network. Now I'm left with no option except return the laptop to Toshiba (I'm less interested in this because I know that sending laptop for replacement will be more frustrating).

  Can someone please give some other suggestions for this problem?

  Hey,.

  Can you connect to your home WIFI router correctly?

  If you have problems with the public network connection, you should ask the owner of these networks. Usually, there is always a contact, you can ask if you have any problems with the connection.

  What you can try is updated WLAN driver from Toshiba's official website:
  http://APS2.toshiba-tro.de/WLAN/

  If it doesn't work, ask the person contact I mentioned.

• Unable to connect to the wireless network, error message "Windows could not finish repairing the problem because it is impossible to perform the following action. Renewal of your IP address.

  Original title: Unable to connect to the wireless network

  Unable to connect to the network wireless Toshiba Satellite A105 PC running Windows 7.  "Windows could not finish repairing the problem because it is impossible to perform the following action. Renewal of your IP address.  Works with Windows XP SP2, IE 8.00.6001.18702 file, I think that Version 3.  It has been installed on a disk provided by Microsoft after that old installation became corrupt (in the sense of Microsoft technical support.)  Before that, wireless network worked well.   (So unable to connect to the Internet for updates.)   Have tried to change the other settings and different messages acquired when it SHOWS that I am connected but cannot connect because of something to do with the certificate.  I don't remember what I did to try to solve this problem in the last days.

  I should add that I have tried the solutions of the previous forum on this topic, and none worked.

  Hi Marilynnla,

  Sorry to hear about the bad experience you encounter. Lets see if the network problem can somehow be archived.

  Read this article and follow the steps. Lets see if it helps in any way.

  How to troubleshoot wireless network connections in Windows XP Service Pack 2 (Works for Windows XP SP3 as well)

• Unable to connect to the wifi service in my house, how can this be repaired?

  I have a dell laptop and I am trying to understand how to do this.  I enter the key of the service network and the message says that the network password must be 40-140-bit according to your network. It can be entered as ascii characters 13-5 or 10-26 hexadecimal characters? How can this be repaired?

  Hi Vickiloo06,

  ·         Did you do changes on the computer before the show?

  ·         What happens exactly when you try to connect to the wifi service, you receive error message?

  I suggest you to consult the following Microsoft Knowledge Base article and check if it works.

   

  Unable to connect to an access point wireless with Wi - Fi Protected Access update installed

  http://support.Microsoft.com/kb/821442

   

  How to troubleshoot wireless network connections in Windows XP Service Pack 2

  http://support.Microsoft.com/kb/870702

  I hope this helps.

• Spectrum X 360: Unable to connect to the wifi Café

  I can not connect to the wifi of my favorite coffee more. I received my laptop of spectrum x 360 a month ago and was able to connect to the wifi of my coffee for a few weeks without problem. Then a couple of weeks it stopped connecting. It says it is connected, but warns that it has limited connectivity. He also said that she was taking an unusually long time to connect. In all cases, it doesn't have a connection to work, because my browser cannot display web pages. I tried to disconnect/reconnect, turning off wifi / it, reboot/power, but nothing seem to help.

  Additional information: I have no problem to connect to my home network using the spectrum of x 360. Also, when I first encountered the problem, I googled and saw that a lot of other spectrum x 360 owner were running into the same problem. So, I installed the latest update of the BIOS and also downloaded/installed a network updated driver. But none of them seem to help. I brought my laptop Mac Pro in the same Café since then, and it connects even before I have the laptop completely open, so it doesn't seem to be a problem with the wifi of the café-restaurant.

  I got the spectrum x 360 more precisely so that I can do work at the coffee shop, it is a huge problem for me. Help, please...

  Hi dmorrill,

  169.250.107.106 is an automatic private IP address windows will use if it fails to get an IP address from the DHCP server.

  -Have you tried to clear your browser cache to see if that's why you can access the page of the router authentication?

  How to clear the Cache

  -Also, check if your Windows Internet setting has a configured proxy address.  If you have a single set, note and empty.

  How to locate the proxy settings

  If still no joy, then could you please find the make/model of router in the coffee shop, and also, what wireless driver version the scepter is running?  Sometimes it can be as simple as the firmware on the router wireless being old and has problems with new wireless solutions.

  It seems that the Macbook Pro has a 802. 11 a/b/g Wireless NIC, while the Sceptre has either an 802.11 a/b/g/n or it may also include 802.11ac support.  This is not necessarily a problem, but you try to access the advanced settings of the wireless driver and try to define 802.11n Mode "off" and see what happens.

• Unable to connect to the Wifi OPEN network that requires a confirmation of the terms in a login page

  I tried to connect to open Wifi network that requires the confirmation of the terms in the login page using my Windows 8 tablet EI.  The login page appear not as I therefore had no way to verify the confirmation as a result of the inability to use the wifi network.  Is it possible to force the connection to the login page?  Thank you!

  Hello

  Thanks for posting your request here in the Microsoft Community.

  This issue could be caused due to any third-party security software or a firewall. I would like to this firewall security software is installed on your computer?

  Temporarily disable Windows Firewall and check if the problem persists. If you use a third party firewall then try disabling that as well. This is to check if the problem is caused due to any firewall related issue or not.

  See the following article from Microsoft Help to disable the Windows Firewall.

  http://Windows.Microsoft.com/en-us/Windows-8/Windows-Firewall-from-start-to-finish

  Note: refer to the "Turn Windows Firewall on or off" section in the following article from Microsoft Help to disable the Windows Firewall. The steps apply as well to Windows 10 Technical Preview.

  Warning: deactivate temporarily the Antivirus\Firewall, then check the issue. Sometimes they may be in conflict. Please make sure that you enable the antivirus software\firewall after the test to keep your computer protected.

  If this problem is specific to a Web page, then you will need to contact the ISP as Karthik Vengaloor mentioned in his answer.

  Please reply with the status of the issue so that we can better help you.

• OfficeJet 6600 connects to the wifi network

  Hello

  I bought an Officejet 6600 and effortlessly connected to my wifi network, print and scan for a day. And there are two days that he stopped conntecting to the wifi network. In the meantime, our router turned off and turned back on. That's the only difference.

  First of all, the printer would not even detect the wifi network. I solved that by changing the configuration of the router (Cisco 3925 EPC) and passed under the Setup wireless "Wi - Fi protected setup" to "manual". I can now see the network on the printer again.

  But after that I've selected my wifi network and enter the WPA password, the printer tells me that the network connection is impossible. I printed a page of diagnosis, which told me that the problem is perhaps related to the MAC filter. But I have no MAC filters. I also tried to pass of WPA/WPA2 to WPA only, but that doesn't change anything.

  I also tried to set the mode wireless via the USB cable, but no avail. Everything seems to work, until the moment when he tries to connect to the wifi (screen with 'configuration' with the large antenna and pulses of radio waves).

  Should I give up and bring it to the store? I'm getting desperate!

  Thanks for your help in advance,

  Raphaël

  OK, to make sure I understand - the printer connects effectively to your wireless network, and well it works for a while once the printer goes to sleep, your computer or router may not wake.

  If this is the case there are a few things that we can try:

  1. in the settings of your router, make sure that the multicast is enabled.

  2. set the 2.4 GHz router to 11 channels.  I know it sounds weird, but please try.

  3. set an IP address of the printer:
  
  -Print a the front of the printer Network Setup Page. Note the IP address of the printer.
  -Enter the IP address in a browser to reveal the internal settings of the printer.
  -Choose the network tab, then wireless along the left side, then on the IPv4 tab.
  -On this screen, you want to set a manual IP address. You must assign an IP address outside the range that the router sets automatically (called the DHCP range). If you do not know the range, change the last set of numbers (those after the last '.') 250
  -Apply the subnet 255.255.255.0 (unless you know it's different, if so, use it)
  -Enter the IP of your router (on the Page of the Network Config) for the gateway.
  -Enter for the first DNS 8.8.8.8 and 8.8.4.4 for second DNS. It's Google DNS. You can choose a different external DNS if you wish.
  -Click 'apply '.
  
  Now, stop the router and printer, start the router, wait, and then start printing.

• Satellite C660-1NJ - unable to connect to the wireless network

  Hi guys

  I got a 1nj c660 and I have a wireless connection to a Fritzbox 7170.

  Now, this morning, everything was fine and I connected wonderfully, but now I can't connect no settings have been changed I just stop and start as usual. I used configfree and it shows the network but if I try to connect it says unable to connect to the network. I have Win7 home basic OS.

  I uninstalled the wireless network card and reinstalled, updated the drivers but nothing works, I still get the same error.

  Can someone help will appreciate it greatly!

  Hello

  Are you able to connect to open WLan?
  I mean you can try to disable security options in your Fritzbox and might test whether you are able to connect without the WEP, WPA or other safety standards.
  Of course, you should only done for testing purposes

  If this box works, then it means that the security of your router settings were not consistent with the settings of the Wlan card.

• HP laptop could not connect to the WiFi network

  My HP Pavillion G6 connects to the Wifi/Home network. It worked fine until recently. It can see the network but will not connect. My product number is C9M83PA #ABG. There running Windows 8.1. Very frustrating. Help, please

  Problem has been fixed. It seems that HP and Windows 8.1 did not get along! After you connect the laptop to the internet via an ethernet cable, I was able to use the HP Wizard to download the updates. I then rebooted both the laptop AND the router and everything works.

• Get the IP addresses of the devices connected to the WiFi network

  Hello guys,.

  I've been looking around and trying to understand this point, but I don't have a solution. The problem is to get the local IP addresses of all devices connected to the WiFi point of access/router connected to my BlackBerry. Similar to the way in J2SE nature you can get the IP using InetAddress.getLocalAddress () and then browse ip addresses and call InetAddress.getByAddress (ip) to check whether the device is accessible. Possible is something similar in BlackBerry or not?

  No, the fault was entirely mine, I misread your message.
  no idea how to do that, there is no access from low level of the network interface and the API is really limited.

• ESXi 5.5 - unable to connect to the management network

  I've been using ESXi for v3.  I have a small cluster of HP DL360 G5 where I was using ESXi 5.1 update 1.  I brought a new DL 360 G5 into the mix and decided to install 5.5.  After the installation, I'm going to set up the management network as usual and even after a reboot, I'm unable to access the site via http or the vSphere client.  For help, I installed the version of HP with CIM providers and I installed the stock VMware 5.5 with current pilot Rollup and they all exhibit the same behavior.  It starts fine, but I can't connect to the management network.  Curiously, however, they address IP does not respond to a ping.  I installed the 5.1 update 1 on the same server and it works fine.  Does anyone have an idea on what's going on?  Are there recommended troubleshooting steps?  It's strange to me because the ESXi has always been very reliable on HPs.

  Thank you - Greg

  Hi Greg,.

  Welcome to the community of VMware,

  To begin with, the latest version of ESXi, VMware supports the Proliant DL360 G5 has ESXi 5.0 U3.