G6 2312ax Pavilion: Pavilion g6 2312ax keyboard does not respond after the death of hard drive

Similar Questions

• Inspiron 13-5323 does not start after the new installed hard drive

  Fall of my Inspiron and Geek Squad said she needed a new hard drive.  I installed a new identical to the former myself blue WD.  When activated, it immediately passes to "Phoenix Securecore Tiano Setup.  Pre-launch tests indicate that the new hard drive works fine.  I tried to start in safe mode UEFI and in the boot Legacy mode, but no boot.  I get a message "Not found operating system".  It is my understanding that this computer has an operating system embedded on the motherboard.  I previously had it improved Windows 8.1 to 10.  When I tried to boot mode safe mode using F8, I had the same operating system not found message.  The F2 and F4 keys on commissioning do nothing different, either.  Am I missing a step in the window settings of Phoenix?  Suggestions while in Phoenix window bringing me could happen to start the system would be appreciated.

  In fact you have reloaded the operating system?  If not, the new drive is empty - it's why you see the message you see.

  You will need all the recovery media, as you did when you received the system - or, if you do not prepare a set, you will need to call Dell to buy a flash drive with the media today.  The alternative is to download Windows 10 TH2, of the same version (standard, pro) that has been installed and activated previously.  You can then reload the operating system.

• End of 2012 iMac keyboard does not respond after sleep

  I have an iMac late 2012 and my keyboard does not respond after that lay down the computer.  When I type the password box is very slowly filled with random letters that are not my password and hit enter just adds another letter.  In my view, that it is a common problem that I am many have known for a few months.  Is there a solution to this I have reset PRAM and SMC, and no work.  It's very irritating and I hoped with every update from El Capitan, this would have been fixed, but not joy.

  I don't know about "modern" Mac and OS X versions, but on my old Powerbook / Tiger awakened from his sleep, it was necessary to 'click' somewhere (I clicked on always in the password field) before the same keyboard would meet all

• Satellite A665-S6086 - keyboard does not work after the outpouring of fluid

  I have a Toshiba Satellite A665-S6086 laptop. A couple of months, I spilled the zeroth power and he went on the keyboard. I'm sure that some went through it as well. The computer turns now and I can use an external mouse and external keyboard. Nothing on my keyboard does not work as well as the mouse. I can't go on the internet due to not being able to use the F8 key so.

  The only key/button that works is the power button. The dvd/cd drive works.
  Help, please.

  The external key board I use has no FN key. a f1 to f12, but when I hit the button on the external key board f8 nothing. Please help me get internet light somehow.

  Thank you

  And what kind of help do you expect now? What can we do?
  Why you n t fix it and be happy with the new keyboard?
  How long you want to use your laptop in such a State?

  Contact Toshiba service, let them swap keyboard and clean your laptop. OK it's a bit chilly but you'll well workbook again.

• Thunderbird starts by does not respond after the update to version 38

  I've updated to version 38.0 yesterday and since then whenever I open Thunderbird, he refuses to open and top watch does not respond. I have to close it via the Task Manager. What's past and how to fix it?

  > I tried in safe mode and it opens and I see my mail but when I try again to open it in mode normal it is just the same thing.

  This clearly suggests that something you added to Thunderbird or the operating system is causing at least some of your problems. If the problem occurs with the OS in normal mode and Thunderbird in SafeMode - http://support.mozillamessaging.com/en-US/kb/safe-mode - then you should suspect a program that is loaded by the operating system, such as antivirus. But if it helps me to http://support.mozillamessaging.com/en-US/kb/safe-mode , then the problem is related to an add-on, or accerlation of material found in tools | options | Advanced | General

• Keyboard does not respond during the restart on Pavilion dv6

  When I restart my laptop and click "esc" - that works - I can not choose any option because my keyboard is unresponsive and I cannot click on the arrows and the Fs. I want to format my HD and reinstall Windows and there is no way I can do this. BIOS is also inaccessible. It could be linked to the issue of the famous 'sticky ctrl' which also remains unanswered for so long. In my view, that it is a major problem which requires attention. Thank you!

  External keyboard did not solve the problem, and before ask you, I tried all possible software solutions that could hardly be connected with this problem.

  The left 'ctrl' key was really physically stuck. Very annoying for a new laptop. Again, brand new, I bought it the day of my original post! I removed the key and everything is perfect, except the key itself ofc.

  I suggest to all of you who have "sticky ctrl" to consider this weird option also. I'm so disappointed!

• Pavilion DV6-2140ED: Pavilion DV6: 10 Windows does not start after the upgrade memory (4 GB-> 8 GB)

  After I upgraded the RAM in my HP DV6 from 4 GB to 8 GB (2 x 4 GB Kingston KTA-MB1333 / 4G), Windows no longer starts. I get a blue screen and it keeps restarting.

  I think that the memory specifications are similar to the Samsung M471B5673EH1-CH9 original memory: Ghz 1333, non - ecc, 1.5 volts, case latency 9 etc.etc.

  It's a laptop DV6-2140ED HP with a processor Intel i5 - 430 m and Intel mobile chipset HM55.

  The bios detects 8 GB and it also passes the check/test of memory. As far as I know that I have also installed the latest bios firmware: F.1D. Reinstall my Windows 10 64 bit does not work either: with 8 GB I also get blue screens, after I try to boot my Windows 10 bootable USB drive.

  I read other people having the same problem, but I have not read a solution yet. What can we do about it?

  Hello:

  Please see this discussion.  You buy a very specific memory for any HP laptop with Mobile Intel 5 series chipset.

  http://h30434.www3.HP.com/T5/notebook-hardware-and-upgrade-questions/memory-upgrade-6550b/m-p/5340551/highlight/true#M207994

• my wireless keyboard does not work after the upgrade to El Capitan

  I have a wireless trackpad, keyboard, and mouse connected to the iMac of 2013. Everything works fine until I upgraded to El Capitan a few weeks ago. Whenever I wake the system from standby mode, I am unable my password key using the keyboard. The keyboard no longer respond or begin typing the characters on his own.

  So I did a little research on the Internet and discovered by turning off the wireless trackpad will solve the problem. So I tried and yes it works. But it also means that I have to turn off my trackpad whenever I need to connect using my keyboard, which is not the best solution. And my keyboard and trackpad have always been placed side by side, works perfectly well until this upgrade of the OS.

  Does anyone have a solution to this?

  Thank you

  Have you tried to remove the keyboard and the trackpad of Bluetooth devices in the bar of Manu. Then allowing them to be discovered again.

  (You may need to hold down option when you select Bluetooth)

• Satellite L505-119 - keyboard does not work after the spill incident

  Recently had a minor spill on my laptop incident. Quickly, I removed the battery and the power and let it dry for a few days.
  After two days I tried starting but without success. Then I carefully opened the laptop and carefully cleaned and dusted it all the way to the motherboard. Surprisingly, it started working perfectly again, with the exception of the keyboard and I don t know what to do.

  I tried making sure that the band is correctly inserted into the motherboard of countless times and tried to uninstall and reinstall the keyboard drivers, but both were not helping. What I want to know is; If there is anyone of you who have had the same problem, and if there is a way to check if it s my keyboard or motherboard that is broken.

  Thanks in advance

  >... If there is a way to check if it s my keyboard or motherboard that is broken.
  In my opinion, there is only one way to check: replacement keyboard. You should test the functionality with the new keyboard to see if everything is OK.

• bridge to aid does not respond after the effect presets

  Bridge stops responding when you try to use or to get an overview after effect presets. The application never gives me the error "not responded" but but does not not in stocks. It could be because the computer is old?

  MAC

  10.11.4

  3.2 ghz intel core i3

  12 GB of ram

  ATI radeon HD 5670

  Measures taken

  Destroyed bridge preferences.

  Uninstalled the application > Reinstalled

  Thoughts?

  This has been resolved with the new Update 2015 bridge

  

• Keyboard does not work after the service pack update

  Original title: keyboard problems

  I installed an update of the service Park on my laptop and now it's like my fn key is stuck. the correct key type if I hold down the fn key.

  Hello

  Method 1:

  Follow the steps in troubleshooting section and check if that helps.

  Some function keys or keyboard shortcuts do not work correctly on a computer that is running Windows 7

  http://support.Microsoft.com/kb/975741

  Method 2:

  Try to download and install the latest keyboard software drivers from the manufacturer's Web site and see if the problem is resolved.

  Updated a hardware driver that is not working properly

  http://Windows.Microsoft.com/en-us/Windows-Vista/update-a-driver-for-hardware-that-isn ' t-work correctly

• Keyboard does not work after the release of the standby mode? Try this!

  I saw the following to resolve the issue where the keyboard doesn't seem to work after being out of the mode sleep on some computers laptops here recently. If you encounter a similar problem, try the following steps:

  -> Panel-> audio & -> Power Options change Plan (of the current selected plan) settings-> change advanced power settings-> parameter of selective suspension of USB-> Disable (both)

  -> Panel-> audio & -> Power Options change Plan (of the current selected plan) settings-> change advanced power settings-> PCI - Express-> Link State Power Management-> Disable (both)

  After completing these steps, restart your computer. Everything should work now!

  I hope this helps!

• Windows Vista does not respond after the removal of a usb device! HELP Please!

  I have windows vista for my PC and I noticed that most of the time when I remove a usb device, the computer is unresponsive and crashes on me shortly after. And I won't have any choice but to cut the main power supply if the computer shuts down. I know that this cannot continue and will eventually damage the computer. Is there a solution and why this can happen?

  Hi ClaudL,

  1. this happens with all type USB devices?

  2 when was the last time it was working fine?

  It is possible that some third-party programs installed on the computer is causing the problem.

  I suggest that you put the computer in a clean boot state and check.

  To help resolve the error and other messages, you can start Windows Vista or Windows 7 by using a minimal set of drivers and startup programs. This type of boot is known as a "clean boot". A clean boot helps eliminate software conflicts.

  See the link below to learn more about how to clean boot.

  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7

  http://support.Microsoft.com/kb/929135

  Reset the computer to start as usual

  When you are finished troubleshooting, follow these steps to reset the computer to start as usual:

  (a) click Start, type msconfig in the search box and press ENTER.

  (b) If you are prompted for an administrator password or for confirmation, type your password or click on continue.

  (c) under the general tab, click the Normal startup option, and then click OK.

  (d) when you are prompted to restart the computer, click on restart.

  I hope this helps!

  Halima S - Microsoft technical support.

  Visit our Microsoft answers feedback Forum and let us know what you think.

• PERC S300 does not does not correctly detect the size of HARD drive

  System information:

  T110 II E3-1230 V2 3.30 GHZ Xenon

  8 GB Ram

  Server 2008 R2 Standard - installed to try to fix this problem, the latest OS will WHS 2011

  RAID 1-2 x Samsung Evo 840 SDS

  4 x Seagate ST3000NM0033 company 3 TB 128 MB cache - these discs only come 1.9 TB in the form of Perc. I have the latest firmware (A06) and now the latest version of the bios, the bios is configured to run as UFEI.

  I want to put these 4 all drives in a raid 10, but they will not detect their full size.

  Any help would be appreciated.

  The S300 is a software RAID controller low end and only supports drives up to 2 TB. The H200 and H700 and new controllers supported disks over 2 TB.

• In the design does not respond after the installation of new

  I upgraded to Creative Suite 5.5 Design Studio, and all products except In Design work correctly.

  In ID, when I try to create a new document or a book, it freezes and I have to FORCE QUIT.

  I reinstalled the software twice.

  I have restarted my computer several times.

  I went through the process of trying to open a file or create a new file (document and book) or create a text of presentation model (plugin) about 30 times... at the end each time to the FORCE QUIT.

  Below the accident report data are transferred to pastebin.

  http://pastebin.com/1QbQKeL0

  http://pastebin.com/qBS1MaGh

  Thanks for any help!

  Removal of SING