G6 2312ax: upgrade g6 2312ax drive

need to know if I can pass my current hard drive of 1 TB to 2 TB

the current one is 5400 RPM

Please suggest... also how can clone my drive hard for that TB 2 If this is possible

Yes you can do it. 2 TB laptop drives are available, but I think they are all the speed of 5400 RPM. They make discs of portable 1 TB 7200 RPM. All 2.5 inches wide and 9.5 or 7 mm thickness SATA will work.

There are many ways to clone, but you should assume that you will need a usb adapter for SATA and a kind of software. I use Acronis True Image Home but it costs money. Clonezilla is free and there are others, as well. It is easy to clone from a smaller to a larger drive. The other way as a 1 TB HDD to a SSD 256 is where it gets difficult.

http://www.Amazon.com/Samsung-Seagate-2-5-inch-internal-ST2000LM003/DP/B00I8O6OQ4/ref=sr_1_1?ie=UTF8&QID=1461165530&SR=8-1&keywords=2+TB+laptop+hard+drive

Post back with more questions.

If it's 'the Answer' please click on 'Accept as Solution' to help others find it.

Tags: Notebooks

Similar Questions

  • Upgrade the hard drive in MacBook Pro?

    Basically what the title says. I saw a site that allows you to send to your MacBook and have offered improved storage I didn't I was going to need it because I wasn't going to do a lot on this computer. Push comes to shove and now "other" it took all the space on my computer (even almost not kidding) got the base model MacBook Pro 120 GB and from this moment other takes 111 GB of the 120 GB. I did try everything possible to delete files, but nothing works. I downloaded an application cleaning and there is absolutely nothing. So if you can recommend someone who proposes to upgrade my hard drive, which would be greatly appreciated.

    Side note:, I tried looking for the site but only find tutorials on how to do it myself and I have myself enough confidence to open this computer and storage upgrade.

    The application of cleaning plant was a mistake.  Each of them can damage your MBP.  Go to the web site of developers for instructions to uninstall and delete it.

    Here is the definition of the OTHER:

    https://support.Apple.com/en-us/HT202867

    Sometimes a re-indexing of Spotlight will correct:

    https://support.Apple.com/en-us/HT201716

    Download the Internet OmniDiskSweeper and Grand Perspective (both free) and open them. They will show all your files and respective sizes. Transfer to an external HARD disk or remove files, that you no longer want on your MBP.

    Don't forget to empty the trash. Then only the space is allocated for the new data.

    https://www.OmniGroup.com/more

    http://grandperspectiv.sourceforge.NET/

    Ciao.

  • upgrade the hard drive on Presario 17XL365

    Inherited this machine recently and I was wondering if I can upgrade the hard drive.  He got a Hitachi DK23BA-15 which is ATA - 66.  But I read that the chipset of the motherboard will be ' interface with ATA/66 hard drives in UDMA 2 mode "-a description of the site intel (North 82443BX/South 82371EB).  Intel® 440BX AGPset.

    So my question is, any laptop drive ide or eide will work with this?  Or I need to find a player who is specificially ATA-66.  Any info on the momentum and the size limitations would also be appreciated.

    Thanks in advance!

    It's a record of 4200 RPM 15 gigabytes. You can use any portable player of up to 120 gig eide, but not anymore. Anyway, you would benefit from a rotational speed of 5400 RPM which is what you can find in the market these days, but will not improve your ATA - 66 maximum transfer speed. The most recent ATA - 100 or 133 readers interfacera just at the speed of 66 but faster speed of rotation of the drive will always access same time help lower transfer speed if that makes sense.

    The number of ATA - 66 is just the maximum theoretical speed, which you reach rarely, in any case.

  • No DVD drive after upgrade the hard drive on Satellite Pro A100

    Shortly after upgrading my hard drive, optical drive has stopped working, now is no longer appear in 'My computer' or Linux. Device Manager says:
    "Windows cannot load the driver for this hardware device. The driver may be corrupted or missing. (Code 39) »

    I tried to reinstall the drivers, the DVD-RAM drivers, and the DLA software.

    All ideas are much appriciated.

    Edit: I just tried an external drive and it has the same problem, it seems to say

    Post edited by: theplatypus

    Error 39 has been described much time here in our small community ;)
    Please check this thread for example:
    http://forums.computers.Toshiba-Europe.com/forums/thread.jspa?threadID=13843&MessageID=50483

    You will find a link to the MS knowledge base document that describes how to solve this problem.
    Use of the method 1: remove the registry entry

  • Upgrade the hard drive and OSX

    I have a macbook pro 2009 environment.  He was bought with Snow Leopard, but now running the Mavericks.  I'm looking to upgrade to SSD drive, but I don't want to clone each update of Snow Leopard for the Mavericks.  I was wondering if there was a simpler solution that: Copping files on an external drive, install the SSD with Snow leopard, then the upgrade to the Mavericks and reloading files.  Any other suggestions/easier way would be appreciated!

    Thank you

    The easy way is to clone your current HDD to the SSD. Then you would start from where you are today.

  • Upgrade Z60m Hard drive

    Hi all

    I plan to upgrade the hard drive in my z60m, a Seagate momentus 7200.4, essentially because it's in the final list of the firmware update I could find.

    I created the ISO disc for the verification of updates of the firmware of the HARD drive and checked my current drive, it works.

    I intend to install windows on the new drive using the restore discs, after which I will manually install the updates for all drivers and all the files that I use regularly.

    My question is when should I use the ISO HDD firmware update program. I'm not buying my IBM HARD drive and understand that the update of the firmware may not work, but at what point should I try. I thought to install the new hard drive and then run the firmware update software before you install the OS from the restore disks. Is this true or do I have to update the firmare HDD after that I installed the original image on the new hard drive?

    Thank you.

    Welcome to the forum!

    Firmware update is really not so much a big deal, you can do it from a bootable CD before installing the operating system, or at any time after that you installed. It really won't do much difference anyway.

    Good luck.

  • Upgrade the hard drive or the new laptop

    I currently own a mid-2010 Macbook Pro that works well (Apple store ran all the checks and he said everything was good), but there almost six years and I don't want to die any time soon (I need a laptop for school). I do not use the mac for something other than Microsoft Office, several tabs on browser, iTunes and occasionally streaming of netflix (just the basics, no game or something serious). Someone has advice or comments on what would be best? And if upgrading the hard drive seems to be a good option, does anyone have good recommendations?

    Here are the specs of my Mac:
    -Processor: 2.4 GHz Intel Core 2 Duo Processor
    -Memory: 4 GB 1067 MHz DDR3
    -Hard drive: 500 GB storage

    In addition, Yosemite (10.10.5) running on the machine without any problem even if it is sometimes slow.

    Thank you!

    Use it as it is. Why update the drive? If you run lack of storage space on the disk, delete some files or get an external drive and move some files on the external drive. Make sure that you back up your data.

  • XP is no longer valid after the upgrade of hard drive.

    Help me please

    I upgraded my hard drive and uploaded my old xp but it tells me this isn't a valid xp, what hurts

    What is the EXACT error you get and when message?

    How did did you transfer the old "xp"?

    If you managed to install it, but are unable to activate, try to use telephone activation - do not meet the request of ansafone for the service that you need, and you should be transferred to a live operator who can help.

  • Upgrading the hard drive Hp Pavilion g6

    Hello

    I'm looking to upgrade my hard drive in my HP Pavilion g6-1d80nr. I do not move much.  Should I get an external hard drive, a new internal hardrive or a SSD?

    Thank you!

    Joey

    Hello

    No, we do not use external HARD disk to replace the internal HARD drive. This means that you can quickly use the internal HARD drive or spend more money to get the fastest SSD (since it has no moving parts). It's to you actually. Since SDS is now very cheap good and that your machine will work more quickly (relatively) interms of performance / $, my suggestion: opt for one SSD.

    Kind regards.

  • Upgrade the hard drive on my HP G62-149WM for a 750 GB,

    If I upgrade the hard drive on my HP G62-149WM to a 750 GB drive (or maybe a 1 to) and use the factory purchased the set of recovery disks, it will install the recovery (hidden) on the disk partition, or not?  What IS the recovery partition, it will install (if installed)?

    Oeagleo wrote:

    If I upgrade the hard drive on my HP G62-149WM to a 750 GB drive (or maybe a 1 to) and use the factory purchased the set of recovery disks, it will install the recovery (hidden) on the disk partition, or not?  What IS the recovery partition, it will install (if installed)?

    Hello

    You can certainly move to a 750 GB 5400 RPM HARD drive, a 1 TB would also be possible, but it is not listed as a compatible hdd in a service guide. After a reset, the laptop will be in the same condition that you used for the first time (OS preinstalled). The recovery partition is going to be on the hard drive as well. Size is not too large, I think that it would be up to 15-20 GB...

  • Upgrade the hard drive of DV6500t

    Hello

    I want to upgrade the hard drive Western Digital WD1200BEVS existing to another hard disk Western Digital.  The laptop I have is a Pavillion DV6500t.

    Help, please.

    Thank you

    kaialii

    You can buy any 2.5 SATA drive "for your computer. For example- Western-Digital-320-Scorpio-WD3200BEKT.

    Is she depend on you - what car you need.

  • Failure to upgrade the hard drive T30 - blinking cursor - will not progress

    I have trouble to upgrade the hard drive on my Thinkpad T30.

    I'm trying to upgrade a 40 GB hard drive to a hard drive of 250 GB.  (New drive is the EVE of Western Digital WD Scorpio 2500 b)

    I used the Western Digital Lifeguard Tools to clone the drive.  Unfortunately, when I insert the new drive in the computer, booting stops and is at the level of the blinking cursor.

    I used the tools of Lenovo's PC to test everything.

    I have used Western Digital Lifeguard Tools to check the hard drive.

    I've updated my Bios and embedded controller program.

    When I start the computer and press F1 to access the Bios, the sign more shows next to the hard drive.  I understand that this means that the Bios recognizes the hard drive.

    I went into Setup to choose the hard drive as the boot device, but the computer still hangs at the level of the blinking cursor.

    When the new hard drive is connected to the computer by usb in an external case, it shows that the contents of the old drive is copied to the new drive.

    What should I do now to solve this problem and get the computer to boot from the new drive?

    A program, often recommended by the ortegeluis is Easeaus Disk Copy freeware that can help you.

  • Upgrade the hard drive or consider a new ThinkPad?

    Hello

    I have an IBM/Lenovo ThinkPad R51e with a 40 GB hard drive. I'll soon be at the limit of ability, and I think to upgrade the hard drive.

    My laptop is under warranty until May 2009, says I guess some of you maybe understand my dilemma. Even the technology IBM says it was a difficult call. He suggested an external drive, but I really wanted to do as it would go against how I personally use my laptop.

    He gave me a 80 GB hard drive part number 13N6709 (it is the biggest hard drive I can go internally with the R51e) which will cost me $261,00

    I tried looking for answers to these questions, but the more I read more my head began to spin.

    There are a few questions (with the help of the people in this forum) I'm eager to know before investing more money in this laptop.

    Do I need other parts to install the new HDD?

    The Pro Windows XP was preinstalled by IBM/Lenovo. It will recognize my serial number to install it?

    All my recovery disks will still work with the new hard drive? Or do I have to buy a new game?

    I'd be better to just buy a new laptop?

    If, therefore, for those knowing what are the features that are on the R51e IBM/Lenovo ThinkPad would get the most bangs for the bucks?

    I'd appreciate really no knowledge that any of you can give me.

    Sincerely,

    Kat


  • Computer HP Desktop M1188A upgraded the HARD drive and memory upgrade possible

    Hello

    I have a HP Desktop M1188A running XP Media Center 2005.  The computer runs very slowly and was only 27.6 GB of free space left on the hard drive with a total area of 149GB.  It has 512 MB of memory installed a 4 GB maximum.  Speed supported is PC3200 MB/sec.  Type of DDR.  DIMM slots 4.  160 GB 7200 RPM SATA hard drive.  Fact hard drive 160 GB 7200 RPM SATA means it is a SATA connection?

    I want to switch the HARD disk like this I hope that the computer runs faster.  I'm a complete novice with respect to the operation of computers.  What to buy to upgrade the HARD drive?

    Will it also upgrade the installed memory?  If so, what to do?

    Everything I need to know?

    Thank you.

    See you soon,.

    Michelle

    Michelle,

    Try for battery HP to THE Bing search engine, I found several sites in line with the Chargers and batteries. BattDepot Australia seems to have decent prices... At$ 24.49 for the loader and THE $37,49 for battery. If you have not yet checked the HP battery reminder page, I recommend you do this first.

    Frank

  • Upgrade my hard drive of 1 TB to 3 TB HOW >?

    Hello I am trying to upgrade my internal internal 1 TB to 3 TB drive.

    What is the best way to do it. Can I just clone my 1 TB using Macrium or Acronis drive and then just take the old internal and

    Place the new cloned internally in the Bay?  Then start right up? The largest clone disk will work on Windows 7 just like the old drive?

    It's just like the change of a smaller size for a larger right shoe?

    Hello

    Thank you for visiting Microsoft Community.

    According to the description of the problem, you are ready to upgrade your hard drive of 1 TB of hard drive 3 TB. This type of problem is better handled by your computer manufacturer. That they are the best people who can guide you how to make these internal upgrade.

    Before upgrading your hard drive, I suggest you to return the items listed below for more information about the limit of the hard drive that is supported by the OS.

    Windows supports hard drives larger than 2 TB

    Understand the limit of 2 TB of storage Windows

    Hope that the information provided is useful. Let us know if you have any concerns related to Windows. We will be more than happy to help you.

    Kind regards

  • Upgrade the HARD drive and install SSD XP to Windows 7 upgrade - which command?

    I want to make some improvements to my trusty HP XP media center PC m7350n.  Ideally, here's what I want to do in a certain order:

    -upgrade the HARD drive (currently 250 and 500 GB installed, replace with 750 unique?)

    -install an SSD as boot drive (60 to 120 GB?)

    -Reinstall XP restore disks media center

    -do a upgrade 'clean' for win 7 Home premium (64 bit?) from the disc "upgrading"

    The Windows 7 upgrade disk looks like for XP/Vista, so I can't put new hardware and go directly to a cost of Win 7 install.

    Plan a.

    I understand the look of for the minimum size of disks restore disks.  All guess what SSD size would be the minimum? I guess the upgrade of the first hard drive and reinstall XP MC since the restore disks would be trivial (as opposed to their use after a motherboard replacement).  If I have XP MC on the SDS, it is only a reason any Win 7 no upgade SDS?

    Plan B

    If I install the SSD after upgrade to Windows 7, I guess I have to use something like a disk copy program to the boot from SSD HARD disk partition.  SUGESTIONS?

    Plan C

    Restoration of SKIP.  Move existing partitions of 250 and 500 GB drives to 750.  Update for Win 7.  Install an SSD.  Move the boot partition.  Use the same drive for both copy program?

    Am I missing something?

    In case anyone is wondering, I have a spare 750Go drive and the Windows 7 upgrade disk so the only "cost" of this update is to purchase the SSD (and if necessary disk copy program).

    Thank you!

    Don

    donprice11 wrote... I want to make some improvements to my trusty HP XP media center PC m7350n.  Ideally, here's what I want to do in a certain order:

    -upgrade the HARD drive (currently 250 and 500 GB installed, replace with 750 unique?)

    -install an SSD as boot drive (60 to 120 GB?)

    -Reinstall XP restore disks media center

    -do a upgrade 'clean' for win 7 Home premium (64 bit?) from the disc "upgrading"

    The Windows 7 upgrade disk looks like for XP/Vista, so I can't put new hardware and go directly to a cost of Win 7 install.

    Don,

    Please read this article by Paul Thurrott more "Clean install Windows 7 with upgrade media '. It essentially says you can make a completely clean install on a drive with no operating system. The key is not to enter the COA product key after installation is complete. I, myself, installed Windows 7 to discs using disks 'upgrade' several times without problems of installation or activation. The order I do it with, is as follows:

    1 copy all the files and folders of the 250 and the 500 GB HDD of 750 GB.

    2. remove the 250 GB, 500 GB and 750 GB of computer hard drives.

    3. install the SSD.

    4. install Windows 7 on the SSD without entering the product key.

    5. Once finished Windows 7 installation, enter the product key and activate Windows.

    6. return old hard disks of computer as needed.

    7. install purchased software and Windows updates if necessary.

    You should go to 4 GB of RAM to get the most out of Windows 7 64 bit and you can upgrade your graphics card.

    Note: You will lose all software provided CVS Windows XP on your m7350n. Make sure that you create your HP recovery discs before you proceed with the change of equipment or install Windows 7. Your HP recovery disks can have the factory included HP software... it may or may not work with Windows 7. Good luck and let us know how it turns out.

Maybe you are looking for