G6 caps lock flashes continuously, nothing on the screen

Similar Questions

• Pavilion G6 Caps lock flashes constantly but the laptop work.

  Hello!

  I've owned my HP Pavilion g6-2292sa Notebook PC (running Windows 8) for about 4 months now and tonight, so I was watching just the net that I noticed that my Caps Lock led flashing continuously, a flash every second. My laptop works fine, and I rebooted to try to stop the flashing, but with no luck. I checked Flash and positions that average hot flashes but mine does not fit in all of this. It is starting, it is not beep just the caps lock flashes constantly. I checked my other lights and see no other spazzing out like that. I'm rather worried because I had to have a new motherboard and HARD drive in a month of purchase. I googled not materialized. Can someone help me please?

  Definitley weird!

  Can you check the UEFI environment in F2? Let's see if it happens there inside and outside to win 8.

  If it happens again, we can try a hard reset - remove the battery and AC and hold the market for 30 seconds, then plug back in. We can also try a BIOS flash - checks whether there is a newer version or re flash.

  If the problem does not occur in BIOS - then you can try a Virus scan / update or restore possible system

• Caps lock flashing light

  I have a laptop hp pavilion 2237nr PC g6, and recently the caps light lock began to blink continuously. It stops for awhile but then it starts up again. my laptop seems to work fine but I am very concerned about the blinking light. Please help I am panicking!

  The problem with your computer is just a little different from the next thread that yours always seems to be start the system and work while the caps lock flashes.  Just not sure what that means, but I think that if go you to sift through this post,

  http://h30434.www3.HP.com/T5/notebook-lockups-freezes-hangs/laptop-won-t-boot-caps-lock-button-light-blinking/TD-p/1300161/page/2

  you might get a few suggestions.  In the post is a link to a document "traffic lights" which may also be useful.

  Good luck

• HP envy 15 t-j100: screen went white and caps lock flashing after update bios!

  Update my bios to the latest version via app HP support and after it restarted the screen are empty and the caps lock flashing! What can I do about it?

  Thank you for visiting @omidmiri.

  Here on the Forums of HP's Support, you have access to many members of the community with solutions and suggestions to help. I understand that you have a problem with a black screen and the Caps Lock LED flashes after a BIOS update.

  The led near the caps lock shift keys and numlock blinks if a fault is detected during the boot process. The LEDs flash multiple times in a sequence and then stops.

  Please try to manually perform a BIOS recovery, as follows:

  1. Turn off the computer.

  2. Plug the laptop using the power adapter.

  3. When the computer is always off:

     1. Press on and hold the Windows key and the B key at the same time and then press in and hold the power button on the laptop for a second.

     2. Release the power button and the keys.

  By following these steps, the BIOS will reach the EFI partition in order to recover the BIOS to the latest known version of the BIOS from the hard drive.

  Source: Documentation computer won't start not and Emits a LED or beep Code .

  If this does not work, please use the above original document to calculate the number of flashes and troubleshoot accordingly.

  If you think this post has helped you, would help others joining and looking for a solution or you just want to say well done, please click the button accept as Solution or Thumbs Up.

  I would like to know how this happens. If you need assistance, I would be more than happy to continue to help!

  Have a great day!

• sleekbook envy 6: laptop won't start, caps lock flashing 3 times

  I want to 6 sleekbook and all of a sudden that it does not start and the caps lock flashes three times I already saw the code flashing and tried to rest the memory but it still doesn't work, I ran in problems with the laptop before the blue screen, but it was fixed its own I think

  Dear customer,

  Welcome and thanks for posting your question on the Forum of Support HP

  It seems that your laptop has a blank screen and a blinking/flashing CAPSLOCK all the time

  If the Capslock LED flashes 3 times this means "Non-functional memory error", in order to solve the problem, replace the card memory

  Note: If you are comfortable open Notepad, you can check how much you have memory module. If you have 2 sticks of memory, you can test one at a time on the two slots individually to check if the fault is with the module module slot or memory memory your laptop [repeat the same steps to test another memory module]

  If you find the above steps difficult and that it is a hardware problem and I recommend you contact HP Support by phone for further assistance immediately to get your diagnostic Notebook and repaired by an authorized HP Certified Engineer

  You can also check your warranty here to check the status of the guarantee

  Hope this helps, for other queries in response to the post and feel free to join us again

  * Click on the star of CONGRATULATIONS on the left to say thank you *.

  Make it easier for others to find solutions by checking a response "Accept as Solution" if it solves your problem.

  Thank you

  GBL84

  Although I am an employee of HP, I speak for myself and not for HP

• Compaq Presario CQ62-412NR does not start. Caps lock flashes.

  The LED caps lock flashes repidadly with long breaks between each blink, the wireless light and constant and the adapter LED is steady. I read blink codes and determined, he was the processor, but the problem persists after him substituting a known good. I finished the resets power to clear the bios before and after the change of the CPU. I also tried to replace the RAM. Anyone here have a clue whats going on?

  This looks like a problem with the motherboard if you already replaced the CPU and RAM.
  
  It would be probably cheaper to replace the unit at this time only so, fix it or replace the motherboard.

• Caps lock flashing, will not start

  Hello!!

  I have a hp pavilion dv6. last night it worked great, sa I closed my laptop, it went to sleep mode with the adapter plugged but without battery. today when I tried to boot up my laptop, I opened and it started only now I get a black screen with caps lock flashing light, I read on the site on an error that the plugs lock this blink, how many times it flashes before, but, my flashes more than 50 times, according to me, strange worm. What can I do about it?

  Thank you!!

  Hi Steve,

  Unfortunately, there are many possible causes for this problem, I mentioned the video chip as possible example given the symptoms you describe - you need get the machine examined to ensure.  Failure of a component is often extremely fast, insofar as it works one minute then is not the other.

  Kind regards

  DP - K

• Pavilion 15n208tx: caps lock flashes

  I use a computer hp laptop pavilion 15 n208tx of 1 and a half, it was perfect pc hp for me until this problem arised. When I press the laptop power button displays the wifi for the f12 screen white button on and caps starts blinking, caps lock flashes for about 12 times, exactly 12 times and then restarts again. and the laptop remains in this state until it starts itself after about 1-2 hours. I'm having this problem for about 2 months. Earlier, it was not so bad but now there has become a headache.

  Guys please help me, what should I do...

  I googled a lot, but it was in vain. My bios version is f.67

  Some have said that it is a bios problem so I tried to downgrade my bios but f.67 is not downgradable.

  Please someone help me. I'm really messed up man.

  This should help:

  http://support.HP.com/us-en/document/c01732674

  also

  http://support.HP.com/us-en/document/c02222922

• In my Aspire One 722 the caps lock ' notification arrested appear on my screen when I switch the key.

  In my 722 one Aspire when I toggle the button caps lock notification stopped appearing on my screen and and also stopped the audio volume indicator display when I change the volume.

  It is currently running Windows 7 and I wasn't able to find the file BTTray.exe.

  I tried to install dirver Bluetooth_Atheros_7.4.0.96_Win7x86x64 but the file is not there.

  Cannot install Bluetooth_Braodcom_6.5.0.2002_Win7x86x64 driver because the computer has no Bluetooth hardware.

  What can we do?

  Please download the Launch Manager application for your unit available at http://us.acer.com/ac/en/US/content/drivers

• Nothing on the screen when Tecra A7 reboot

  For about a week, my Tecra A7-201 shows a strange question.

  When I reboot then there is nothing on the screen, but the machine continues to boot.
  I can connect to the machine with MS Office remotely and in the Device Manager I see that there is no graphics cards and also without monitors listed.
  I can stop the machine and then remotely and the same thing happens again to restart.
  To get the screen back, I need to disconnect the power to the machine, remove the batteries, wait about 30 seconds, put battery back/ac on and now I have my screen back.
  As I can't even Toshiba/BIOS boot screen to display everything that this happening before that windows never loads.
  It happens too regardless the State of home (docked/undocked) or voltage (AC or battery only).

  I have no idea if the partners, but also the screen sometimes "flashing" - like lightning just a fraction of a second and returns to normal.

  I'm running the latest BIOS 5.60.

  Clues? The machine is still under warranty (and has been back to Toshiba for another problem already - so it could be a machine on Monday).
  I asked Toshiba here in Switzerland and I get no response, just need to look at the machine (which means that it is gone for another week).

  Thanks for any help

  Peter

  Hello Peter

  I don't really know what the problem is here (probably related equipment), but please do not contact Toshiba but partner service authorized in Switzerland. If you need address, you can find them under http://www.csd.toshiba.com/cgi-bin/tais/su/su_gaspLocator.jsp?pf=true

• Anyway continue Voiceover if the screen turns off?

  Hello world

  I use Voiceover to read eBooks for me, but the voice-over goes out once the auto lock turns off the display.

  Is it possible to do the Voiceover to continue even if the screen turns off?

  Thanks for your help!

  Hi Dionysus17,

  AFAIK the only way to solve this problem is to disable the auto-lock on your iPad. To do this, go to settings > General > lock and from here you can choose when you want to stay for before your locks iPad screen.

  Hope this helps,

  Aaron

• Satellite P200D died - nothing on the screen, no HARD drive noise

  Hello
  Toshiba P200D-112 (satellite)
  Just 2 years and already 'OUT '.

  When I press the Start button, the power light comes on and will stay on.
  The fans start but stop in a few seconds and nothing more happens.
  Nothing on the screen, no hard noise complete silence.
  If I continue to press the start for a few seconds power button is sharp as usual.

  Looks like a protection stop start to work.

  I changed the CPU for nothing (the only chip that I can change without welding).
  I tried with battery and without the battery.
  I changed the HD.
  I deleted the DVD player.
  Now, I have on the table, just the motherboard and I have always the same thing.

  Do you please an idea on the reason of this phenomenon.
  Thanks Christos

  Hello

  I see you didn't check the RAM modules.
  Usually, it is the first part that should be checked before you disassemble the laptop everything and try to replace the other, new parts like CPU or similar

  But if the replacement of the RAM won't help, so I put t see any other solution proposal to replace the whole motherboard.

  It's a shame because the new motherboard costs a small fortune

• 3 beeps pause 3 beeps pause nothing on the screen

  3 beeps pause 3 beeps pause nothing on the screen

  Hello

  Sound beeps are error codes that describe a problem with your machine. A continuous beep
  can mean keyboard (loose or bad cable), losing the card, power, a short circuit or other matter according to the
  System/BIOS manufacturer. The model 3 beep indicates similar type problems.

  Startup and select CONFIGURATION/SETTINGS (BIOS/CMOS) - usually F2 that you start - look to see BIOS
  Creator, then see here:

  Computer MESSAGE / beep codes
  http://www.computerhope.com/beep.htm

  If my computer beeps and won't start, what do the beeps mean?
  http://KB.IU.edu/data/afzy.html how to troubleshoot Beep Codes
  http://pcsupport.about.com/od/nonworkingcomponent/HT/beepcodestb.htm

  POSTAL Codes beep
  http://www.technick.NET/public/code/cp_dpage.php?aiocp_dp=guide_beep_codes

  Power on Beep Codes post
  http://www.pchell.com/hardware/beepcodes.shtml

  It may have other check so with system Maker or a real computer store (the one that makes its own internal
  service and not of leeks and glances at a Best Buy or other stores).

  I hope this helps.

  Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle=""><- mark="" twain="" said="" it="">

• Caps lock seeing abruptly stopped visible on-screen. How can I get that back

  Caps lock seeing abruptly stopped visible on-screen.  How can I get that back

  Windows is not a caps lock indicator.  The indicator on the screen is provided by another program, provided by the manufacturer of your computer.  Computers Dell, for example, have a program called QuickSet which performs this function.  Other computers, such as eMachines, use a program called HotKey that is running in the taskbar near the clock.

  If it stop working, the program may have been closed (or maybe even turned off by someone else). A great troubleshooting step is simply restart your computer.  As long as the program is still installed, it must itself automatically restart (assuming nobody has disabled it).

• Equium L10-273: fan of CPU/HDD / lights come on but nothing on the screen

  I have an Equium L10-273 and had to put in a new power outlet in the mobo.
  I removed the wide and electronics. A friend of my put news on that to get back together.

  It sounds if the HARD disc / CPU fan / lights come on but nothing on the screen.
  Have unplugged the cable from the screen and he recovered but not good.

  Any suggestions welcome

  PS: A mobo out on a Toshiba Equium A60-155 will be mine?

  To me, this looks like a motherboard problem.
  In my view, replace the whole motherboard.
  But it s only my personal suggestion, if you want to be 100% sure what's exactly wrong with you laptop, then go you and technician of the notebook check.

  PS: Don't think that a card mother Equium A60 - 155 to insert in the notebook Equium L10-273.

  Greetings