G60 - 228CA: unable to connect to the Linksys E2500 router with laptop G60

Hello

I hope someone can help because I've been through the forums and I will have no chance to solve my problem.  I bought a new router (Linksys E2500) and my laptop (G60 - 228 CA) HP can detect the router but just failed to connect to the internet.

I tried to diagnose all the problems which have been proposed, but that did not help.  I restarted the router, nothing helps.  I tried to download and install a new driver to replace the old (Atheros AR5007 802. 11 b / g WiFi Adapter) but still had no luck.

Really not sure where go from here so looking for help solve this problem.

Thank you

Hello:

Verify that the driver you have installed is actually that of 2011.

If not, go to the device, right click on the atheros wireless card, Manager select uninstall and if there is a box to uninstall driver for check, check.

Reboot and try the driver I posted again.

If the date and the driver version is what is indicated on the driver file, then unfortunately, I don't have any other suggestions for you to try.

Tags: Notebooks

Similar Questions

  • I am unable to connect to the Linksys WRT54G Router with wired connection to Office XP.

    My two laptops (XP and a Win7) will be connected to the router wireless and wired (ethernet). When it is plugged directly into the DSL modem, the Office connects and works very well. This problem started when I had to replace the DSL modem.

    I inherited this problem for my elderly mother... and it all started because they gave me the router password wrong, who now works (router has been reset) on two laptops, but when connected, the Office doesn't even show a light of connection on the router except during startup. I no longer get a window of logon passwork for the router, and I am unable to connect/ping the router in the office. (192.168.1.1)

    I would like to clarify a few things.

    1. two laptops work fine with cable connections and wireless through the WRT54G.

    2 desktop PC, which has only a wired connection, does not connect successfully.

    3. the symptoms of the failure of the desktop connection to are that the link on the router at the start light flashes during initialization of the PC but then will Dim.

    4. when the desktop PC trying to connect to the internet, it fails.

    5 when the desktop PC try to connect to the administration WRT54g page it fails.

    6. when the desktop computer try PIING the router at 192.168.1.1 IP address it fails.

    These points are correct?

    Assuming this is correct, open a command prompt and type

    IPCONFIG/ALL

    The output of the command should provide some information about the current state of the network connection.

    It would be useful that you posted this here release.

    The absence of a link light can be your main symptom and may be due to several reasons. He probably has an associate status "media disconnected" in IPCONFIG for the network connection.

    This could be caused by a bad network cable or a network connection disabled in the properties of the network on the PC. Small jets knowing the ot IPCONFIG output is would help more.

    Post this info if you can.

    Good luck

  • Unable to connect to the Agent to push with my credentials in the project PushCollector 10.1.

    Hi all!

    I am trying to create a client application to push to go with my project that I am creating a customer and am trying to learn how the PushCollector 10.1 functions to do this. I seem to have a problem, however, where the application may not be able to connect to the Agent to push after entering my credentials sent by the Services of Blackberry Push team showing.

    I logged into my account to make sure it is active and it is and have re-joined the AppID and the PPG URL 8 times literally!

    What I read I don't need to change anything in the file bar.xml for the PushCollector, but maybe I missed something.

    Can someone help me please?

    Thanks for your time,

    Rob

    Push requires a real device, so I think you have to find the cause of the problem.

  • Unable to connect to the printer - operation failed with error 0X0000003b

    When I search a printer in my local network and connect, the message "Operation failed with 0X0000003b error" always appear.

    Hello

    Run the Microsoft fixit from http://support.microsoft.com/mats/printing_problems/en-us

    Also, follow the steps in http://answers.microsoft.com/en-us/windows/forum/windows_7-networking/0x0000003b-on-printer-install-error-i-cannot/3b5a2538-1fde-4793-b16d-c61ca0999569?msgId=e0331f31-f29c-41e0-bdda-558f654c1053

    Hope this could help you. Let us know the results.

  • Unable to connect to the modem of Iball with SIM in my laptop

    I get the following error when I am clicking on the shortcut menu.

    "The program can't start because kr.dll is missing on your computer. Try reinstalling the program to fix this problem. »

    PL guide me how to.

    Hi Mary,

    Any software or driver installed on the PC, trying to connect this modem iBall?

    A ".dll" which is necessary for the proper functioning of the device is missing.  If Yes, as shown in the error, please uninstall the program and reinstall it.

    See the article of the edition of the program of
    Uninstall, change or repair a program (change a program)
    http://Windows.Microsoft.com/en-us/Windows-8/uninstall-change-program

    Now, reinstall the program.

    In addition, make sure that the device is compatible with Windows 8.1.  If the device is not compatible with Windows 8.1, please refer to the article.

    http://answers.Microsoft.com/en-us/Windows/Forum/windows8_1-hardware/driver-installation-failed/76e89096-7372-4a21-A3CB-d2096617a0b1

    You can also get in touch with iBall chat support.

    http://www.IBall.co.in/home

    I hope this helps. If you have any other questions, we will be happy to help you.

  • Unable to connect to the console of administration with devulcanization account

    I returned the account admin console on a new media server configuration 4 and it won't let me connect or connect using the login "admin"?   It affects the password some defect?  This is all new to me because it's my first installation of this server.

    How to create a new admin connection?

    How can I change my login?


    Help!

    Thanks, Tandrist

    There is a configuration file with name fms.ini , you can find in the flash media server--> conf(c drive). You can set your user name and the passwor there.

  • Should which driver I connect to the Linksys E1000 router wirelessly

    I'm all set upward on my wireless network and all my other devices (iphone, tv, ect.) wireless connection.  My HP Pavilion dv6700 connect however no wireless.  My router is a Linksys E1000 and their support team has informed me that it is a problem of HP with their driver.  My driver is current and up-to-date (Atheros AR5007 802. 11 b / g WiFi Adapter).  Does anyone know how to fix this?  Please note that I have tried all the simple fixes, same driver update, it's not as simple as resetting the router or ensuring that my wireless switch is on and emitting a blue light.  If anyone knows how to solve this problem, I will be forever indebted to you and may even bye breakfast you!

    Thank you

    Tim

    Hi, Tim:

    Are you sure you are using the latest driver?

    This is the latest version of the driver and it is supposed to solve connection problems with Atheros wireless adapters and routers Linksys E series:

    http://h20000.www2.HP.com/bizsupport/TechSupport/SoftwareDescription.jsp?lang=en&cc=us&prodTypeId=12454&prodSeriesId=472276&swItem=ob-91782-1&mode=4&IDX=1

    Paul

  • HP Envy Notebook dv6: unable to connect to the proxy server

    I saw an error message "Unable to connect to the proxy server" when I try to connect to the internet via WIFI, even if the label shows who is connected to my home router.

    HR63 wrote:

    Thanks for the tip, there is so much information, the laptop with this problem belongs to my daughter and because she doesn't have an internet connection (can not download anything), there is another way to fix it?

    I don't know because the online is where most of the instructions are locate in. I copy and paste the links here, but unless you can print them out or print the online pages it becomes hard, but here are the parts of the txt of it. +

    http://malwaretips.com/blogs/unable-to-connect-to-the-proxy-server-removal/

    How to remove "Unable to connect to the proxy server" (Virus Removal Guide)

    This page is a comprehensive guide, which will remove "Unable to connect to the proxy server" virus from your computer and any other adware program that may have been installed during the installation process.
    Please complete all of the steps in the correct order. If you have any questions or doubts in any point, STOP and ask for our assistance.
    STEP 1: restore the default proxy to your machine settings
    STEP 2: remove failed to connect to the ad software proxy server from Internet Explorer, Firefox and Google Chrome with AdwCleaner
    STEP 3: delete impossible to connect to the proxy server with Junkware Removal Tool browser hijacker
    STEP 4: delete impossible to connect to the virus pop up server proxy with Malwarebytes Anti-Malware free
    STEP 5: check a second time for the "unable to connect to the proxy server" malware with HitmanPro
    (Optional) STEP 6: delete impossible to connect to the proxy server of Internet Explorer, Firefox and Google Chrome ads

    http://www.geckoandfly.com/9275/Internet-connection-error-unable-to-connect-to-the-proxy-server/

    It is with IE

    Step 1 - launch Internet Explorer

    Step 2 - Click the icon "but" it looks like a gear wheel...

    Step 3 - select 'Internet Options '.

    Step 4 - Select the 'connection '.

    Step 5 - Click Lan settings

    Step 6 - uncheck "use a proxy server for your LAN (these settings may not apply to dial-up or VPN connections)."

    Step 7 - click 'Ok' to save the changes

    If you are using a proxy server, check your proxy settings, or check with your network administrator to make sure that the proxy server is running. If you don't believe that you should use a proxy server. Here's a video tutorial:

    Also, if you can since I don't remember which browser your help that gave you this message that I had to go with IE as a default.

  • Unable to connect to the Administration of Linksys to my WRT54G v.6 page

    Hello

    Recently, I moved into a new House and brought my old router with me.  I set up this router to my former place long ago, but when I hooked it up here, I am unable to connect to the Admin of Linksys page (http://192.168.1.1 for example).  I think that I changed the router what IP to 192.168.1.101... it was a long time ago so I don't remember exactly.  I tried find what it was by typing "ipconfig" in the command prompt and using the address "Default gateway" IP address as the address of router, but that has not worked.

    I tried to reset the router to factory default settings by pressing the button of reset for 30 seconds, then connect to http://192.168.1.1 but it does not help.  When I release the reset button, just power light continues to blink rapidly until I unplug the router.

    I can access the internet without any problem, but I noticed that I connect my router differently than the instructions provided here.  I connect an ethernet cable from my modem to 1 of the 4 ports on the router (just like my laptop) rather than the port of 'internet' on the back.  Don't know if that is related or not, or even what is the cause.

    I use Windows Vista on my laptop if it makes a difference.

    Thanks in advance for your help,

    Ryan

    The modem must be connected to the internet port of the router and the conputer on one of the 4 ports on the router... Now, check if you are able to ping the default gateway of the router. If you get 4 answers then, make broser on the computer settings... Open an IE, click Tools > Internet Options, then click on delete and delete all the files, cookies, history, forms... GoTo 'Connections', make sure that never Dial a connection is selected, click on network settings and make sure that all the options are unchecked... Once you are finished, click OK... Close IE and reopen...

    Now, try to open the linksys configuration page by typing 192.168.1.1 in the address bar. You can also try another computer.

  • Unable to connect to the Internet via a Linksys Wireless card

    I used a Linksys BEFW11S4 for several years with no problems.  A PC is connected via a network cable and the other (Dell laptop) used a wireless adapter Linksys that plugged into the laptop (model of Linksys WPC11 ver (4).  All my computers using Windows XP with the latest service packs.

    I plugged the Dell laptop to the router via a cable to transfer files faster than the network B.  Then, when I disconnected the cable and reconnected the wireless card, I was unable to use the Wi - Fi connection to connect to the internet.  Wired works very well, is not wireless.

    Windows reports a good wireless connection to the router, but the machine is unable to connect to the internet using the wireless card.  It can connect to the internet when using a network cable, however.

    Pings what either using the Wi - Fi connection failed (expired).

    I used another laptop (a more recent Toshiba with a wireless card built-in) to connect to the router and it works very well with the connectivity wired or wireless.  No problem switching back with this machine.  So, the problem is not with the router or the router configuration.

    I was through the forums and seen a LOT of people seems to have the same problem with these Wireless Linksys routers.

    I tried to use the Easy Link software to configure the machine, but: (1) Linksys updated web site is not valid, and (2) with the www.linksysfix.com/ela site that directs users to the software is also invalid.  Linksys technical support seems to be lacking.

    I went to the usual network setup menus and two laptops seem to be configured the same way, again, we're working wireless and we do not.

    I would appreciate solutions others have tried and who has worked with this problem.

    I reinstalled the drivers for the Linksys card and it does not work.  Windows recognizes the new hardware card, reports that it is connected to the router, but still no internet connection

  • HP Deskjet 3050 - unable to connect to the WPA secure wireless network

    Hello

    My first post here so please excuse any misstep on my part.  I bought this HP Deskjet 3050 a week ago and have since been war with it.  I would be really grateful if someone could possibly give advice on how I can solve this problem.

    I am unable to connect the printer to my secure wireless network, even if the other computers, cell phones, etc. are connected without problem.  I tried WPA, WPA2 and WPA2-Mixed modes with the same failure security. Specifically, the 66% reached Connection Wizard, then displays the error that the wizard can not find/network printer.  If I disable the security, the printer connects very well.

    I use a Linksys WRVS4400N router with firewall and associated firewall disabled settings.  The router broadcasts on 802. 11 g / N mixed mode.

    I install the software provided on the CD for installation on a Windows XP SP3 System.  I confirmed that the PC and the printer are connected to the network are the same.

    The issue as well, if you will allow me: I have not yet tried these drivers, but I see there are any updated drivers for the printer in date from 14/12/2010.  The release notes indicate the improvement of networks, but do not develop beyond that.  Does anyone know if there was a known problem with the connection to secure networks that has now been corrected?

    Finally, just a note that I am partially blind and using a screen on all systems reader.  I'll try my best to be as helpful as I can to please forgive me if I can't find the settings, etc. on screen and sometimes need help for a little more detail.

    Thanks in advance for your help, I really enjoyed.

    Have a nice day,

    All the best for now and take care,

    Hussein.

    It is not the fact that it is impossible, is the fact that this was not done, yet.

    Hello

    first of all, my apologies for the delay getting back to you.  Poor health means that I had little time or want to do great thing on the side of the computer of htings.

    In any case, I am please to say the problem with the HP 3050 failing to connect to my network is now resolved.  There seems to be a bug with the installer, and that seems to include the version the most recent publication Dec 2010.

    To resolve this problem, I did the following:
    1. disable all security for the network options, so it's just an open network.
    2. connect the HP 3050 to the network by using the installation wizard. This time it connected OK for me.
    3. Locate the IP address of the printer.  I used the table of customer list accessed by my router interface. You may be able to get this through the printer on the menu screen, but as I am partially blind, it wasn't an option for me.
    4. Enter the control panel of the printer to http://ip.address.of.printer for example http://192.168.2.108
    5. under Advanced options, configure the network settings, including the password and the Security Protocol.  Don't forget to enter the SSID of the network exactly as it is configured on the router.
    6. apply settings, disconnect from the control panel of the printer.
    7 log in the router configuration panel and re-apply the security options.  Make sure they match these match those entered for the printer.

    I hope it will be useful to others in the same position.

    Thanks again for your time.

    Best,

    H.

  • E3200 unable to connect to the Internet

    I bought a new E3200 to replace my old Linksys router.  It finds my computers and set up a network, but unable to connect to the internet via my Comcast cable modem.  I read on this forum to the questions of the Mac address, but it has located the Mac address.  Internet IP address is all zeros, and releasing and renewing the IP address does nothing.  Help!

    Connect to the computer with the Ethernet cable. Check if you are able to access the Internet.

    Open the command again.

    And do the ipconfig/all.

    Note the physical address in the Ethernet connection to the LAN card.

    Connect the Modem to the Internet Port of the router and also connect to the computer with the Ethernet cable to the Ethernet port on the router.

    Press and hold the reset for 30 seconds button.

    Cycle power to the modem and the router.

    Open the Linksys router configuration page.

    Go to the Mac address Clone and activate it.

    Enter the physical address that you noted.

    Do not click the Clone my PC MAC, Save the Settings.

    Cycle power to the modem and the router. See if you are able to access the Internet.

  • "Unable to connect to the computer printer" message appears during installation of laserjet p1102w.

    During the installation of the wireless software for Laserjet P1102W on computer with XP Professional (pk2), the message ' printer was able to connect to the wireless network.  However, this computer is unable to connect to the printer. "I checked the printer and the computer both connected to the same network named with even WEP key, opening, credentials etc.  I have a linksys connected to the computer and the modem cable. When I connect using the USB connect wire to the computer directly, I can print.   Two software, wired and wireless, have been loaded.  My HP inkjet printer is wired to the linksys and works for multiple computers to the wireless network. Do I need to have another printer? I thought that I could still have a truly printer wireless!  I'm a novice at this.  Thanks for any help you can give.

    I called HP support.  The technology was very knowledgeable and accommodating.  HP Smart Install program (in the printer and on CD) that came in the box was an old version.  I had to reset the printer back to factory default and to download the new firmware on the HP.com website.

    The oldest had an incorrect address router (network). You can see the address of the router (IP) when you perform the self-test (hold down the button "on") under the information network.  IPv4 address must be the same as your router.  Now my printer and computer are looking at the same network.

    Works great!  Love this LaserJet.  Faster than my last HP LaserJet 4 L.

  • OTP-S3100 is unable to connect to the server

    I have a brand new BDP-S3100 connected to a Linksys E3000 router and I'm unable to watch videos or photos stored on my computer HARD drive. I installed and tried different servers (Plex, Serviio, etc.) and they are all listed in the menu photo or video, but sometimes they display the logo of the server and other times, it displays the default server logo. When Server oogo is displayed & it seems that it is connected, I click on it & the message - no playable file. But the I'm trying display formats are jpg and mpg - both DLNA-supported.

    I can connect to the movies internet & streams via Amazon and other applications without any problem at all.

    Help!

    Anyone?

  • I could not update or install applications for weeks, so I disconnected my Apple ID and rebooted the phone but now I can't reconnect! The error is: unable to connect to the iTunes Store. I should w8 for ios10 and hope that it will be fixed by the new ios?

    I could not update or install applications for weeks, so I disconnected my Apple ID and rebooted the phone but now I can't reconnect! The error is: unable to connect to the iTunes Store. I should w8 for ios10 and hope that it will be fixed by the new ios? Cause don't want to reset my phone.

    You have tried: If you can not connect to the iTunes Store - Apple Support ?

    And I tried to do a soft-reset/reboot the phone?

Maybe you are looking for