G60-230US == > does not connect to the wireless network

Similar Questions

• I've updated windows and now my computer does not connect to the wireless network.

  I've updated windows security updates and now my computer does not connect to the wireless network.  Until then, it worked very well and even now it will connect through wired connection but not wireless.

  Hello
   
  You can follow below link that can help you to solve your problem:
  How to troubleshoot wireless network connections in Windows XP Service Pack 2
  http://support.Microsoft.com/kb/870702

• My computer does not connect to the wireless network

  My computer does not connect to a wireless network. It's almost like there is no WiFi. I go into the settings and nothing is. I know that the networks are there because the other computers connect to it. He says always "no connection available. When I try to pull of boredom he tells me to plug an Ethernet cable, which is the thing that I try to avoid. I want to connect to WiFi.

  Based on this information, your laptop isn't wifi, it is turned off, or it is broken.  A wifi used to work?  If so, what happened to your system, just as the problem started?

  Type "Device Manager" in the search box and press ENTER.

  • Look in the Device Manager to the network adapter section.
  • What devices are listed?
  • Are there warning icons?
  • It appears to be a wireless adapter, what's his name? Double-click it and to report to what is shown for "State of the device.

  You can also provide additional diagnostic information:

  • Type 'Information system' in the search box and press ENTER.
  • Click in the system information window and select all (CTRL + A) and copy (CTRL + C)
  • Paste (CTRL + V) the data in your response here
  • Return to system information window and click on the + next to "Components", then click on the + next to "Network", then click on 'map '.
  • Select all (CTRL + A) and then copy (CTRL + C)
  • Paste (CTRL + V) the data in your answer below, other data Information System

• CQ60-210US reformatted for Windows XP Prof, but it does not connect to the wireless network...

  Long story short, I tried recently to "downgrade" my husband computer CQ60-210US laptop from Vista to XP.  I followed the very detailed guide posted here and everything seems to work great but my computer does NOT connect to my home network.  It comes as an available network, but when I try to connect it goes on to say that the network is no longer available - is yet to ask security key.  I tried to click on the connection to a neighbor to see what would happen and it seems to go further (it asks me the security key).  I can connect directly using the ethernet to the modem cable.

  This laptop was initially working on my network wirelessly with Vista.  I use a CLEAR 4 G wireless modem.  The signal from the modem is good.

  Can anyone help me identify the problem and propose a solution?  Everything else seems to work well.

  Thank you very much!

  Try to uninstall the Atheros driver, you have now and install another:

  FTP://ftp.HP.com/pub/SoftPaq/sp52001-52500/sp52131.exe

• Map Wi - Fi on Satellite L40 does not connect to the wireless network

  Hello

  I have Satellite L40-15B with a realtek RTL8187Bcard. Problem is I Don t get a connection on wifi, but everything seems ok. I ve installed the BIOS update, the latest drivers and updates for Vista. Psychic Network is turned on, network switch is on, and yesterday everything worked fine. I had this problem too when I bought the laptop but thought that I solved it. Not!

  Vista tells me that everything is installed and works well. I can also see some available networks, but when I try to connect it just doesn't work.

  Someone at - it an idea what to do next? (by the way the network is ok other laptop computer wifi works fine)

  Thank you

  Albert

  Hello

  Your wireless network card seems to be properly recognized in Device Manager. And the problem is that you are not able to connect to the WLan router. Am I wrong?

  Have you tried to disable the Wlan encryption settings and then test the WiFi connection?
  You should also try to reset the settings of the Wlan router.
  Sometimes it helps.

  I got a WLan connection problem too I've checked everything twice and nothing worked Finally I reset the Wlan router. and surprise, surprise it's a key

• Motorola Milestone does not connect to the corporate network after updating to Froyo...

  I've updated my Milestone that is the version of Froyo UNITED Arab Emirates yesterday after a long delay, was really excited all night until I've discovered two problems with my wifi.

  The device does not connect to the corporate network, as my office uses EAP 802.1 x and there is no place to enter proxy where my friends using samsung galaxy s (Froyo 2.2) connect to the network and navigate using the wifi settings advanced to enter the proxy in their device.

  Any help? Please, I beg you.

  Hey Ronald, I've updated by upper about the update saying that UNITED Arab Emirates and EGYPT got last week. Don't know if the Saudi version has achieved, you have the Saudi Version or is it the same in the UNITED Arab Emirates. If his UNITED Arab Emirates you can do it via the PC using Software updater by Motorola...

• Satellite L350 does not connect to the internet, network adapter yellow exclamation

  Trying to help my Nan with his laptop...
  Model is Satellite L350-170

  Does not connect to internet, even using the Ethernet cable. Network cards have yellow exclamation marks on it and seems he needs an updated driver. How the hell can I download and update if it does not connect to the internet. And then, what update is necessary, because I searched on here and there is no update driver for network card?

  She had various internet help from its supplier and a visit at home but still no joy. Internet works fine on other devices. Any advice greatly appreciated.

  All the drivers can be downloaded from the Toshiba UE driver page.
  http://www.Toshiba.EU/innovation/download_drivers_bios.jsp
  Choose your model of laptop in the form of download and the system that is pre-installed on you unit.
  Then, you will get the list of drivers.

  If you are not able to connect to the internet due to lack of driver LAN/WLan, then you another computer for download.

  You asked how to remove the network card?
  Usually, you need to access the Device Manager (in Control Panel) then we need to expand the area to network adapters and you will find the LAN and WLan card.
  Click the single LED adapter, and then press or click on uninstall button driver

• Satellite A300 - does not connect to the secure network to WPA

  Help please... new Toshiba Satellite A300 - running XP Professional with atheros AR9281 (driver 7.6.0.200) wireless network adapter will not connect to the secure networks, WAP, but seems to be fine with the WEP and non secure networks?

  I can connect to my WAP secured network using LAN cable and also if I use an external Netgear wireless adapter, so the problem is probably with this adapter or driver. I updated the bios and tried update driver, but no luck. Current driver is (I believe) more up to date?

  Would be grateful for your help.

  Thank you.

  On the Toshiba site is a newer version of the driver available (7.6.1.149.1)
  Then I would try the new driver.

  Consult the Toshiba site:
  http://EU.computers.Toshiba-Europe.com-online decision-making supported Downloads & => Download drivers

• B210A Photosmart - server connection error and does not connect to the wireless router

  I have problems setting up and to connect my router to my new printer b210A. Everything goes well with the initial configuration, and when asked to connect to the network at the start, it works. Then he said that the printer requires updates, downloads of updates, reboots, asks me if I want to activate eprint and as soon as I said 'Ok', I get a "the server connection error" and it is then no longer connected to the network. When I get out of the "server connection error" screen and attempt to reconnect to the network, he says 'Success', prints a Test report wireless, but never connects.

  It's the 2nd printer that I have had in a week, given that the person of HP online chatting told me my first printer had problems of "hardware", after experiencing the same problems and I'll be recommended. So - I did, and now I'm running into the same issues. The number of 800 was NO HELP - after recommended I have unplug and reconnect, then telling me there were server errors (when the printer was not connected to the network).

  We will set an IP address of the printer with a special focus on DNS domains:

  -Print a the front of the printer Network Setup Page. Note the IP address of the printer.
  -Enter the IP address in a browser to reveal the internal settings of the printer.
  -Choose the network tab, then wireless along the left side, then on the IPv4 tab.
  -On this screen, you want to set a manual IP address. You must assign an IP address outside the range that the router sets automatically (called the DHCP range). You can find the beach DHCP from the router using its internal settings page or in its manual. Use the CD that came with your router or type the IP address of the router (ends para.1) in a browser.
  -Apply the subnet 255.255.255.0 (unless you know it's different, if so, use it)
  -Enter the IP of your router (on the Page of the Network Config) for the gateway

  -For the first DNS 8.8.8.8 and 8.8.4.4 for the second use.
  -Click 'apply '.

  Now, stop the router and printer, start the router, wait, and then start printing.

  After that, you will have to redo 'Add printer' using the new IP address.

• HP 7520: HP 7520 will not connect to the wireless network

  There is some additional information to

  http://forums.Xfinity.com/T5/home-networking-router-WiFi/HP-7520-will-not-connect-to-wireless-networ...

  on this issue.

  Have several APs for a single wireless network allows the printer foolish law.  (Not a Repeater, a second AP connected to the local network with the same configuration of network for security, etc.).

  I solved this problem.  In accordance with the discussion on the link, the problem is that the printer cannot connect to a wireless network if there is greater than 1 for a wireless network (SSID) name wireless access point.

  This thread has had several useful suggestions, but what finally solved the problem, it's the second point has access to a mode where I can create a 'virtual' access point and, above all, a SSID associated.

  Note that not all access points or routers support virtual APs, but this function seems to be more common over time.  Older models is not able to do that.  However, a new access point is sometimes cheaper than a new printer.

  If you do not understand the jargon in the procedure below, I recommend that you find someone who does, then they can do it for you.

  Solution:

  1. On one of the wireless access on the network, create an a new virtual AP with a slightly different name SSID (for example < name of the network - > _1), on the same VLAN (usually VLAN 1).  You may need to put the AP in "multiple AP mode" or something similar, and then restart the AP.  All other settings (DHCP, security, mixed mode b/g/n, etc.) must be the same for the new SSID.
  2. Run the printer Wireless Setup and connect it to this new SSID
  3. Confirm that the printer can be seen by other devices on the network

  Tips:

  • Check the security is the same as the original SSID, Alternatively you can create a vector of insecurity in your network.  Do not WEP-128 when the other SSID uses WPA2 AES, for example.
  • The AP I had had several resets to make it work because of the mode and parameter changes.
  • If you connect the SSID but cannot connect to or be seen by anything on your network, check the new SSID/AP is in the same VLAN as the original.
  • Because the printer is not roaming, and the speed is not a problem for me, I used the access point that could support this solution, which is deeper and slower than my primary AP.  I have not noticed any problems.

  The printer has been reliable on the wireless now on the new SSID, 48 hours.

  I have not upgraded any software on a client of the printer (PC, Mac, phones).

  I think that it is a positive confirmation that the problem is with the implementation of the printer of the stack of network and not with the driver or client software on remote devices.  The 802.11 protocols provide for a network name (SSID) wireless with several access points using different MAC addresses.  I suggest this HP look into this as a potential bug with their network printer for the 7520 protocols stack.

• Laptop with Windows XP pro does not connect to the home network. Has been fine with the Linksys router. Updated Netgear router again and now will not work.

  Improved the old Linksys G series to new router Netgear N600 - now can't connect wireless or directly with the ethernet cable. Status shows: "acquiring network address" or "little or no conectivity.  Worked through all the options of repairing typical network with no luck.  Also reset router, I tried direct cable modem & shows 'connected icon' but still does not connect to IE.  Another new computer with Windows 7 works great on this network.  What is my next step to repair?

  Use a static IP address and see what happens.

  How can I configure my static IP address?
  http://ask-Leo.com/how_do_i_configure_my_static_ip_address.html

• Laptop will not connect to the wireless network

  I have a Toshiba laptop with windows Vista, and it does not connect to wireless internet at my father's House. My father and my sister have the same exact computer, and both of their computers work perfectly well. Mine will work with an ethernet cable plugged in, but when I try to connect wirelessly, it does not work. I've never had this problem in my mom's house or anywhere else. Can someone help me please?

  Hello

  This is a security feature of each wireless router I've ever seen, although I wouldn't be surprised to discover that some router didn't do it. You need to check your router admin pages to see if mac address filtering is in effect. Address filtering Mac prohibits access to the router by any unauthorized network device. All network devices have a unique mac address which you can find through opening a command prompt (click Start, then type cmd and press enter) and then typing ipconfig/all. The output refers to your device Wireless 'physical address' (mac address) and will be in the format hh-hh-hh-hh-hh-hh, where hh is a hexadecimal number (A - F and numbers 0-9), dashes are not important and may not be required when you enter your mac address in the router configuration.

  Tricky

• Photosmart 5524: Photosmart 5524 will not connect to the wireless network

  I recently moved house, and since the move does not connect the printer to the network.

  The router and the parameters are the same as before the move, and appliances are on opposite sides of the same coin.

  Initially, he sees the network, but does not connect when you press the WPS button or the password.

  After the first attempt he cannot see all networks at all until the settings are reset, even if the network name is entered manually.

  Printed on the test result to get a 'Pass' for YOU wireless and WIRE WORKS, a "failed" to FIND NAME of NETWORK and "Not run" on all other tests. The proposed solution is not useful, as it suggests using the Wireless Setup Wizard to set up the printer, which I already do.

  No other device has problems see the network or connection to it. MAC filtering is not lit. Some devices have a static IP (required to stop Ipad wife being a tyrant of intellectual property), but the router DHCP is still active for most devices.

  Temporarily remove your SSID of your router password. Now try to connect to your SSID unsecured. Are you successful? If so, go back and add WA2 - AES with a password and try again.

• LaserJet P1102W: [RESOLVED] LaserJet P1102W does not connect to a wireless network on Mac

  UPDATE: the below solution worked on my MacBook, both running El Capitan. Ignore the instructions provided in the manual of the P1102W and follow the steps below.

  I have a P1102W printer.

  Recently my LaserJet P1102W refuses to connect to networks using WPA Wireless.

  As it does not have an IP address, I can't access the web server.

  She also does not connect to my Mac Wireless via Bonjour. The printer will install when connected via USB.

  I installed printer HP Apple drivers, that contains the P1100 driver.

  The P1102W worked before wireless. I only noticed this anomaly since installation El Capitan and moving the printer to another room with my workstation.

  I need the printer to use the wireless network, as I did not have enough space on my desk for him. And I just can't place it anywhere within the range of a USB cable.

  Are there alternatives to this?

  Hi @rcosgrove,

  Welcome to the Forums of HP Support!

  I see that you encounter some problems connecting your Laserjet P1102w printer to your network wireless using your Mac computer. I can help you with that.

  First of all, I would like to mention that it would be easier to the printer connected to your network using a Windows PC. If you can't borrow or use a Windows PC, the following steps should allow you to connect the printer. If you can borrow a PC, please let me know what version of Windows and I can provide a link to the drivers to configure the printer automatically.

  Preparation of the printer

  1. Turn the printer off.
  2. While the printer is turned off, hold down the two buttons on top of the printer.
  3. Hold the buttons on top of the printer and the printer.
  4. Hold down the maintained for even 10 seconds.

  Wireless printer setting

  1. Make sure that the printer is connected to your Mac via the USB cable.
  2. Click on your Apple icon, system preferences and printers and Scanners.
  3. Click the icon of your printer on the left.
  4. Click Open print queue, printer installation, utility of printer, open printer and HTML Config utility.
  5. (If the above step generates an error, change your default browser on Safari. Please let me know if you need assistance with that).
  6. In this new window, click on the networking and wireless tab on the left.
  7. Under Mode of Communication, select Infrastructure.
  8. Select your network from the list and then click on the button with the arrows.
  9. Under Security Mode, select WPA/WPA 2. If you have an old router, you may need to select WEP instead.
  10. Enter your password wireless in the field below.
  11. Click on apply.

  Now, wait a few minutes. Your printer must change to have a solid blue light. If it is not the case, either the password has been entered incorrectly or there is a setting on the router that the printer is having a resolution of the issue. Please let me know if this is the case.

  Once you have a solid blue light:

  1. Unplug the USB cable.
  2. Return to the printers and Scanners.
  3. Hold down the CTRL key and click the icon of the printer on the left.
  4. Click on reset printing system.
  5. Click on the button "+" in the lower left corner.
  6. In this window, select your printer in the list.
  7. Click in the box next to and select your printer from the list.
  8. Click on Add.

  Please let me know if you are able of print or the results after following the above. If you can print, click on accept solution. If you appreciate my help, please click on the thumbs up icon. The two icons are below this post.

  I hope this information is useful. Please reply to this message with the results. Good luck!

• My Toshiba laptop does not connect to my wireless network.

  I have windows 8.

  One day all of a sudden my laptop disconnected the WiFi and it does not connect again. It shows not all connections, even if there is. All my other devices can connect to the wifi. When I see the attack it says that I need an Ethernet cable but I don't have my laptop and never a need. (Sorry for the bad English). Help!

  Hello

  Free Wi - Fi and wireless problems
  http://Windows.Microsoft.com/en-us/Windows/network-connection-problem-help#network-problems=Windows-8&V1H=win8tab1&V2H=win7tab1&V3H=winvistatab1&v4h=winxptab1

  Note the use of Win Key + X and Win Key + W (to access control panel, run,
  and settings according to needs). Win + D key calls to the office and use
  Win Key activates / deactivates the desktop and start screen.

  --------------------------------------------------------------

  Control Panel - Network and sharing Center - solve problems

  References to Vista also apply to Windows 7 and Windows 8.
  
  Your router be guess here, you have successfully updated the firmware a possible
  solution? And I would update your WiFi drivers on computers. How far away are they
  you have set in the router? Are there obstacles in the path?

  Actually try updating your driver and disabling the network logon.

  Control Panel - network - write down of the brand and the model of the Wifi - double click
  top - tab of the driver - write version - click on update driver (can't do
  nothing that MS is far behind the certification of drivers). Then right click on the Wifi
  Device and UNINSTALL - Reboot - it will refresh the driver stack.

  Look at the sites of the manufacturer for drivers - and the manufacturer of the device manually.
  http://pcsupport.about.com/od/driverssupport/HT/driverdlmfgr.htm

  Microsoft - How can Windows 8 - I fix the network adapter problems? (Do not forget to see
  This section-> update the NIC driver).
  http://Windows.Microsoft.com/en-us/Windows-8/fix-network-adapter-problems

  Drivers and Microsoft - Windows 8 - Hardware
  http://Windows.Microsoft.com/en-us/Windows/hardware-drivers-help#hardware-drivers-help=Windows-8

  Microsoft - Windows 8 - why Windows is not find my device?
  http://Windows.Microsoft.com/en-us/Windows-8/why-isn ' t-windows-conclusion-device

  Microsoft - Windows 8 - what happens if a device is not installed correctly
  http://Windows.Microsoft.com/en-us/Windows-8/what-device-isn ' t-installed-correctly

  Download - SAVE - go where you put it - right click – RUN AS ADMIN.

  You can download several at once however restart after the installation of each of them.

  After watching the system Maker you can see the same device manufacturer
  more recent versions. (Those become your fonts of rescue system manufacturer).

  Repeat for network (NIC) card and is a good time to get the other update
  Drivers Windows 8 like updated drivers.

  ------------------------------------------------------

  Make sure you know the details of connection to your wireless router - SSID and password.

  You lose connection when you do and have to redo your logon.

  Control Panel - Network & Sharing Center - set up a new connection or network

  -----------------------------------------------------

  And:

  TechingItEasy - how to join a Wi - Fi network in Windows 8 by MVP Andre Da Costa
  http://techingiteasy.WordPress.com/2012/06/09/how-to-join-a-Wi-Fi-network-in-Windows-8/

  Microsoft - Windows 8 - Web & Networking
  http://Windows.Microsoft.com/en-us/Windows/Web-networking-help#V1H=win8tab1&V2H=win7tab1&V3H=winvistatab1&v4h=winxptab1&Web-networking-help=Windows-8

  Microsoft - Windows 8 - Wi - Fi & Networking
  http://Windows.Microsoft.com/en-us/Windows-8/WiFi-networking#1TC=T1

  -----------------------------------------------------

  Microsoft - Windows 7 - Why is my Internet connection so slow? (applies to Windows 8)
  http://Windows.Microsoft.com/en-us/Windows7/why-is-my-Internet-connection-so-slow

  Microsoft - Windows 8 - wired and wireless in Windows problems
  http://Windows.Microsoft.com/en-us/Windows/network-connection-problem-help#network-problems=Windows-8&V1H=win8tab1&V2H=win7tab1&V3H=winvistatab1&v4h=winxptab1

  =======================================

  Check with Toshiba support, online documentation and drivers (update or reinstall) and ask in their forums.

  Toshiba - Forums
  http://laptopforums.Toshiba.com/

  Toshiba - Contacts
  http://www.CSD.Toshiba.com/cgi-bin/TAIS/support/JSP/navShell.jsp?CF=su_contact

  Toshiba - drivers - access your model
  http://www.CSD.Toshiba.com/cgi-bin/TAIS/support/JSP/home.jsp?NAV=download

  Toshiba - Support
  http://www.CSD.Toshiba.com/cgi-bin/TAIS/support/JSP/home.jsp
   
  I hope this helps.
  --------------------------------------------------------------------------------------------
  Rob Brown - Microsoft MVP<- profile="" -="" windows="" experience :="" bicycle="" -="" mark="" twain="" said="" it="">