G60 549DX Notebook: display issues

Last week, my screen has been turn off as programmed but turns it back free to within a period of 3 to 10 minutes. How can I solve this problem? I ran antivirus protection and have not found any problem here. It began after the last windows update but when I restore to an earlier date, it continues to do so.

I did a back up then a system recovery and that solved the problem.

Tags: Notebooks

Similar Questions

  • I can't find the button to click for my webcam = laptop G60-549DX

    I can't find where to click to activate my webcam on hp G60-549DX Notebook

    Hello
     
    Here to find the Webcam you must follow these steps below.
     
    1. click on start.
    2. type in the search bar located on the start bar or simply Youcam Cyberlink Youcam .

    Once you have located it, I advise you to make a copy on your desktop or the taskbar.
     
    For more support, you can check with the manufacturer of the system.
     
    WWW.hp.com

    Thank you, and in what concerns:

    I. Suuresh Kumar-Microsoft Support.

    Visit our Microsoft answers feedback Forumand let us know what you think.

  • Laptop G60-549DX (with OS Windows7-problem with the microphone when using Skype)

    Just bought a laptop G-60-549DX. His mic is BAD. Voice of cuts to when using Skype. Help!

    I was able to solve the problem with the microphone on the G60-549DX when using Skype.  I spend up to 6-8 hours, talk with convenience stores of HP.  They were very friendly and helpful.  The same help a friend.  My friend downloaded updated bios and micro drivers.  HP technician asked me to turn off the laptop, then remove the battery, unplug the power cord. With battery removed and stop, I pressed the market / off power button for a good minute evacuate remaining power into the computer. When I restarted the laptop I micro worked. I did a little more fine-tuning of the installation of the microphone.  Now, it works well on Skype and sound recorder. I won't take this back within the 14 days return policy.  It's a good computer I can say.  The technicians were all very friendly and helpful.  They called me several times to check to see if it still works OK! They are HUGE!  They want to help with any other question, I have perhaps with the computer.  Thank you very much for the help. Everyone was SO helpful.

  • My laptop (HP G60 120US Notebook PC) has been reformatted for Windows 7 to Windows Vista Home Premuims.

    My laptop (HP G60 120US Notebook PC) has been reformatted Windows 7 for Windows Vista 64-bit. Software has been installed (Broadcom WLAN801.11 n/g/b) but the wifi doesn't work do not

    Hello JerlegManilla.  Thank you for the update.  I'll keep an eye out for your next answer!

  • replace motherboard HP g60 549dx, how much will it cost parts and labor?

    You will appreciate very much if you can inform me, what will be the cost for parts and labor to replace the motherboard of my HP G60 549DX.

    Also include where to bring the unit here in Manila.

    Thank you very much

    Dave

    Hello bebotski59,

    Welcome to the HP consumer support community.

    I apologize for the inconvenience, but this is a peer-to-peer community for customers to connect and share solutions for their HP products.  It is not a place to contact HP directly. If you have additional or direct comments for HP on their products or services, please use the link below to other contacts.

    http://WWW8.HP.com/us/en/HP-information/summary/WW-contact-us.html

    If you have other questions and concerns about the use of the forum, please do not hesitate to send me a private message.

    Thank you.

  • The PS CC 14.2 display issues - return to 14.1?

    I've just updated to Photoshop 14.2 CC and I have several display issues. For example:

    • With quick mask mode and only a few blocks of the overlay color appear - they resemble red window shutters
    • Click on a channel thumbnail to view it. Then click on the thumbnail of the RGB channel to return to the normal display, but it is not switch back.

    I never had these problems with the previous version and I don't have the time to deal with him now. Is it possible to revert to the previous version? Thank you.

    Mark Ulmer

    Mark, have studied the replacement settings available in your Performance preference panel?

    For example, under [Advanced...] there a drawing Mode setting.  It may be that your particular display driver would rather have Photoshop use a setting less there.  Make sure you leave/close and restart Photoshop after you make a change to a setting in this Panel.

    Also, you say "the driver is up-to-date.  As there are a number of ways to do it, it would be good to confirm that you have specifically obtained the last version of driver, that the manufacturer has published on their own site, not Microsoft.

    -Christmas

  • Sound/display issue for Y560

    I called Lenovo support yesterday for help with a problem of great keyboard I had, and as part of technology works on my computer, it is obviously invalid of any function it is which shows that physical volume control reacting to the screen.

    Previously, I'd get a popup notification if the mute button has been enabled or disabled and a Visual of a control volume, moving upwards or downwards. Part of the issue of the keyboard is that the characters randomly activate the volume, it is REALLY important that I can see if it is triggered, I use this laptop in class.

    So, any ideas? The problem with keyboard is something that they are working on, but I'd really like my volume controls to be visible on the screen at that time. I don't talk to the traditional volume control, but popups that show when something is turned upwards or downwards.

    Thank you!

    The screen display is a part of the suite software Lenovo Energy Management. Re-install, and you'll be all good!

  • Display menu on a display issue high resolution

    OK, so I've dealt with this kind of problem before in other programs by using a high resolution display.  It appears in the latest version of Lightroom that there is a bug with the location that the menus are displayed on the screen (see image below).  in the latest version of Lightroom, it's a non-issue.  I upgraded last night and now I'm having this problem.

    General information

    PC Microsoft Windows 8.1 with all latest updates.

    New version of Adobe Photoshop Lightroom (previous version has not caused the problem).

    The display configuration double

    Monitor 1: Dell U3415W to 3440 x 1440

    Monitor 2: Visio M65 - C1 65 "LED TV at 4096 x 2160

    Please let me know if anyone has a solution or if I need to provide any additional information.

    Best regards

    -Thomas

    Image located here: Dropbox - screenshot 2016-07-23 04.07.47.png

    Hi again once Thomas, Adobe today released a updae:

    Lightroom CC 2015.6.1 and Lightroom 6.6.1

    Update your version of Lightroom

  • external display issues

    I had recently a 2012 13 "unibody macbook pro by a friend who has updated.  He had trouble with it and the replaced hard disk after a couple of times under warranty got tired of not being able to get his work done and got a new macbook pro after the expiration of the warranty.  I had to replace the hard drive cable and put an ssd in it, and now its working great.  Yesterday I tried to plug in my monitor 20 "1920 x 1080 dell via the port external mini display and it detects the monitor very well, but the monitor was cut every few seconds as he was losing the signal.  After messing around a bit, I realized that if I set the resolution 1080i or 720 p it works very well, although 1080i looks really fuzzy, somewhat similar and old crt monitor who did not properly defined phase.  I did a lot of research and found many people with the same problem, but most of them have been posted years ago and had no other resolution that the people complaining that apple was aware of the problem and refused to fix.  I was wondering if there was a way to solve this problem, because it would be nice to work on the largest screen in some applications.  This is my first time owning a mac and the first time using one since about 2002

    You have another cable to try?

  • Portege M200 display issues

    Hello. I just got my new M200 tablet pc, but the display is sluggy compared to my screen Tecra S1. Looks like there is something on top of the display Assembly that makes sluggy image and the colors too. This can be seen especially on white background. Is there a plastic to remove, because I looked and I think he does not like or is it normal for the tablet PC?

    Hello

    The Portege M200 LCD screen is covered with a protective mask. This protective film is integrated into the LCD mask to prevent scratches on the LCD Panel - caused from dirt or handling - caused by the use of the pen.
    You can't compare these two screens (Portege Tecra) for Portege is tablet pc with the protective mask and Tecra has a very different display with other properties.

    Good bye

  • Cyan line dotted on screen, OSX or display issue?

    Hello

    I actually sometimes a (non-continuous) dotted line cyan (attached image) in the left side of my screen.
    Sometimes it disappears or come back again after the reboot. Is this a problem on OSX or it s a monitor/screen-hardware problem.

    How can I turn it off?

    Thank you.

    Mac mini (late 2012) OSX 10.11.3 2.3 GHz i7 16 GB RAM Intel HD Graphics 4000 1536 MB

    267 GB free on hard disk.

    Display: AOC 27 inches (1920 x 1080) 2769M model.

    I think its hardware partner.

  • LED 24 "Cinema Display issues

    Hello

    my old Apple Cinema Display Monitor broke and I think I used ('excellent condition') 24 "LED Cinema Display (white folder).  My questions are:

    1 - is it compatible with my computer of MacPro5.1 Tower?  My computer has a DVI and 2-port MiniDisplay, but everywhere I've read so far he says that the LED 24 "is made for MacBooks and other laptops.

    2 - How do people like the LED display for FCP editing.  It has a glossy finish.  My old screen has a matte finish.

    Thanks for your comments.

    -Eve

    As you know DVI is a video standard, as well as the USB connection or any other connection, as long as your device (MacPro) and the monitor (screen cinema) has the same DVI ports, they work perfectly, in fact you can even connect your Cinema Display to a Windows PC since DVI is a standard.

  • want to HP dv6 7250er: display issue of hp dv6 7250er envy

    Hello, I want HP dv6 7250er and it has 1366 x 768 display matrix. I know seria 7000 include laptops equipped with matrix FullHD. So is it possible to change the matrix of 1366 x 768 on matrix FullHD?

    Yes, but... Here is the Manual:

    Manual

    The HD and FHD panels use a different display cable to switch to the display of 1920 x 1080, you need the FHD Panel and cable:

    anti-reflective, FHD 15.6-inch display panel 682090-001

    View the cable of the Panel for use only on the computer models equipped with a block of FHD display and an Intel processor 682057-001

    http://www.eBay.com/ITM/HP-Compaq-682068-001-682090-001-698960-001-15-6-FHD-screen-LCD-led-display-/200804915033?hash=item2ec0e7d759:g:IAoAAOSwxYxUyo1B

    http://www.sparepartswarehouse.com/HP, Laptop, hand, 682057001.aspx

    Cable costs about the same as the screen. If you shop around a bit, I think you can do a little better.

    https://www.YouTube.com/watch?v=wd_Qtx0rmiI

    If it's 'the Answer' please click on 'Accept as Solution' to help others find it.

  • End of 2015 4 external K iMac display issues

    Hello people. My 27-inch 1920 x 1080 monitor is bugging me. It looks terrible as a second screen. So, I'm looking to get a second monitor 4K for my iMac. The main reason for this is that in my opinion the Apple Thunderbolt monitors 2K resolution aka 2560 x 1440 pixels.

    I read some mixed reviews on the iMac being incapable of managing a screen 4K of UHD to native mode (forgive the lack of the proper term).

    So I did some research more. I'm starting to think that the "Default" is in 2K resolution. If that's the case I suspect that the next option is 4K and 5K, then to "more space".

    Some thoughts: I know that I can call apple support. However, I suspect that they don't know the answer they don't sell a 4K display. I can always call according to the answers here.

    1. the spectator (someone else or I) will use even the other modes? I'm trying to acclimate to the option more space and it is a review. If I go back to 'Default' scaling the 4 K might be a waste of money.

    2 suppose I decided I can live with the option to the right of the "Default" or "More space". The new iMac will be able to run two monitors in this mode? Or will the card really bogged down? I mean if this is the case, it might be a mute point as well.

    3 Apple doesn't sell a thunderbolt 4 K screen that is convincing. The big question is "what is the reason for this? If this is the point of ball one I can keep buying a second monitor 4K. If it bullet point two and the iMac is not enough to manage the display that will be disappointing and I can be forced into a 2K monitor anything.

    So I hope that users with power in the community have a few comments and or experience with a second screen 4K. Bravo and thanks in advance!

    Bryan

    So what I want to do should work correctly according to the technical specifications . 5K monitors are way too expensive right now, so I think that will give Dell P2715Q 27 a shot.

    • At the same time supports the native resolution on the built-in display and up to two external displays 4096 by 2160 or a double-cable external 5120-by-2880
  • Several display issues w / Mac Pro

    We have a Mac Pro 2013 "trash", w / El Capitan and the D700 gfx card. It has two poster 24 "stroke of lightning and a HDTV. Recently, Setup has been moved, and now it appears two of the monitors.

    Thunderbolt Display #1 is connected directly on the Mac Pro. Thunderbolt Display #2 is logged in #1. And HDTV is connected via the HDMI port. Currently, the Mac Pro shows only the bolt of lightning to display n ° 1 and HDTV, but if I unplug the HDTV, the Mac Pro is displayed for both screens Thunderbolt. For some reason, it will not display at all three monitors more.

    I tried to detect the poster, restart the computer in safe mode and THISprocess, but not luck.

    Any suggestions?

    Have you tried plugging the connected pair TB to other than bus 0? HDMI port is also on bus 0

Maybe you are looking for