G62-219WM recovery disks does not

Similar Questions

• For 1000-zx satellite recovery disk does not work

  XP Recovery disk does not work. The 3 options are unresponsive. Is there an easy solution. All other functions of cell phones seem ok. It is a reliable machine for more than 3 years, but now must use the recovery disc. Brilliant ideas greatly appreciated.

  Hello

  Well, I put t know why you recovery CD doesn t work. Have you checked the CD some scratches? Have you tried to clean this CD?
  However if it of impossible to use the recovery CD, you can contact the ASP and buy a new one. It doesn t expensive.
  In addition, you can install an original Windows operating system and then all the Toshiba necessary drivers on the Toshiba site.

  Good bye

• Satellite A30 - 203 - recovery disk does not work

  Hi all

  I have an old Satellite A30-203 and have a problem. I tried to format my laptop but the product recovery cd does not seem to work in deletion the data on my disk, its becomes blocked during loading files of ntfs? Now I am not able to retrieve a windows session would I need a new product recovery cd and would be able to get it?

  Thank you

  Hi dimation,

  It is difficult to say what is the reason of this but made is either it s a laptop problem itself or the recovery disc (e.g. scratches) causes this problem.

  In my opinion the best way to check this using a Microsoft Windows disk. If the installation completed successfully, you need a new recovery disk. As a result, you can ask a service provider authorized in your country! :)

• DVD - ROM Toshiba Recovery disk does not start

  Hello

  I'm having some problems with my Toshiba Satellite M40, and I decided to reinstall the OS with the recovery of the dvd disk, but the disk does not start.
  When I'm on windows, the cd/dvd driver works perfectly, and I don't think that the recovery of the dvd disk are damaged.
  I have already tried:
  1. by pressing the "C" key to start the computer
  2 - press "F12".
  3 - Enter the BIOS Setup and select cd-rom to start first

  But the computer starts up normally and no error message appears

  Can someone help me? I don't know what to do

  Thank you

  Hello Palma

  Can you please test it with some other bootable CD or DVD? It will be interesting to know if this happens with the recovery media only or even with other bootable media.

• HP ENVY 17 - 1190nr l 3D: recovery disks does not not for HP Envy 17 - 1190nr

  My main HARD drive died. Toshiba 500 GB MK5056GSY was the 'C' drive factory installed. The laptop also has a "D" drive, which was the same exact brand, model and size.  (secondary HARD disk does not work at all. Long story, but I think it is a driver or a hardware problem with the motherboard)

  I overwhelmed the secondary HDD at the location main, reformatted and reinstalled the operating system with the set of recovery DVD 7, SUCCUSSFULLY disks.  But, since I can't have a second HD to wor, I decided to spend the primary HARD disk capacity, so I installed a Seagate 1 TB HARD drive.  Now, I have reinstalled the operating system using the recovery discs 7 DVD and when the 7th finished disc, a window open warning that says "Recovery manager cannot restore your computer using the original image. "Please contact the HP support (Yes right, it's a joke) error code: 0xe0ef000e.

  I also tried to install the operating system with the recovery of a 240 GB SSD disks. Same question.

  BUT, the original secondary drive allows the operating system recovery 7 DVD image reset goes to work.

  WHY?
  
  Finally, if I install a stand alone Windows 7 OS for the new Seagate 1 TB drive, it works fine.  The problem is that all additional drivers, programs etc. provided with the laptop originally are net, just a light version of Windows 7. The works of the OS, but the wireless, the blueetooth, readers of cards, etc. do not work. And missing a few programs that comes with the original image (some are too expensive to buy when I wouldn't need it again).

  Thanks for any idea on this issue.
  HP makes me very angry today.

  Hi there -@Bob,

  Thank you for joining the Forums HP's Support and welcome! It is a great place to ask questions, find solutions and get help from others in the community! I read your post on the Forums of HP Support. I wanted to join you and help! I understand that your recovery discs do not work on your HP ENVY 17 - 1190nr 3D Edition Notebook PC.

  • What is the model/product of the Seagate 1 TB HARD drive?
  • You can enter the BIOS?
  • Can you see the HARD drive in the BIOS?

  If you can, please:

  • Restore the BIOS
  • Press F9 to change the boot sequence to reflect the new hard drive.

  Please let me know if I answered your question by clicking the "Thumbs up" if the troubleshooting in this post steps solves the problem for you please click on the button "Accept as Solution" . This will allow to the others is that present the same problem a solution also. If you need assistance, I would be more than happy to continue to help you. Please just re-post with the results of the resolution of the problems.

  Thank you!

• Recovery disk does not work now I have installed a new hard drive.

  I replaced my hard drive on my laptop HP - computer pavilion dv7 notebook. My recovery disks do not seem to work now, I get to 62% completion and then the error message "Recovery Manager is unable to restore your computer by using the original image. Please contact HP support. "Error code: 0xe0ef000e" do I need to buy a new HP recovery discs? Thanks, Nick

  Hi, Nick:

  Unfortunately, I don't have any experience in troubleshooting these special software installations.

  We should expect to download and install.

  If they are not, I have no tricks up my sleeve for you to try.

  I recommend starting a new thread describing your questions with this software and hope that someone else in the support forum can help you with these items.

  See you soon,.

  Paul

• Satellite L350-170 - recovery disk does not work

  Hello

  I have a L350-170 running Windows Vista home, I recently buy a Toshiba restore CD and now that it's happened, it does not work.

  I put in the CD and boot from the CD drive, I can hear work and the display shows "Windows loading files" and a bar appears at the bottom of the screen, after that, the screen turns white and all I'm left with is a pointer of the mouse and a black screen.

  Thank you
  Jackie

  Hello

  Have you tested if the laptop would start using another bootable Linux Live CD, WinPE or Win XP disc?
  Please check that would help determine if the problem is related to the computer laptop or recovery disk.

  Please also check if the HARD drive is ok. For this test, you can use a test called Drive Fitness Test free HARD drive tool. Google for it.

  However, it could also be a defective recovery disc and in this case, you should get in touch with the guys where you ordered this drive may be you need a replacement.

• Satellite L300D-202: restore using recovery disk does not work

  Good afternoon

  Wonder if anyone can shed some light on this error message I get when trying to restore my laptop...

  «Setting permissions V:\HDDRecovery...»
  V:\HDDRecovery the system cannot find the specified file
  Unpack the WinRE...

  L ' ImageX for Windows tool
  Copyright bla...

  Opening the file in error [V:\HDDRecovery\SWImg\06546XSP.svml
  ERROR: ImageX could not apply WinRE V:\HDDRecovery\SWImg\06546XSP.svm index 1 of the HARD drive to W:!

  Press any key to continue... »

  After that, I find myself with the Toshiba Recovery with no action software and a screen BACK Active but nothing happens...

  I'm guessing that lack of HD, received today from Toshiba for this system recovery media

  Laptop is:
  Satellite L300D 202

  NB. If I restart the laptop start date and shows BOOTMGR is missing Ctrl Alt Del to restart...

  Any help appreciated,
  Thanks in advance,

  Rick0684

  > NB. If I restart the laptop start date and shows BOOTMGR is missing Ctrl Alt Del to restart...

  Hmm... for me, it seems that the laptop does not start from the disc (DVD), but it attempts to boot from the HARD drive...

  In any case, have you tried to boot from another disk; for example, Win XP, Linux Live CD?
  To do this, and check if it is possible... If Yes, format the HARD drive and try to boot from the recovery again disc!

  PS: Have you tried a HARD drive recovery option?
  Turn on the unit, press F8 and choose fix my computer
  After that, select Toshiba HDD recovery option if possible.

• Satellite C650 - error reading disk and the recovery disk does not work

  Hello

  I have a toshiba Satellite C650, who has recently developed with a disc read error. I want to access the command prompt to try some possible solutions I've read on the internet.

  I made a Windows 7 recovery disk using my other acer laptop which has also installed Windows 7 64-bit. When I use the recovery disk and it loaded the files etc it evokes just a black screen and the cursor.

  Does anyone have any ideas as to why this is happening?
  I tried to start my computer acer laptop from the recovery disk and it worked fine.

  As is - this does anyone have suggestions as to why I get the message "disk read error - press ctrl, alt and delete to restart?

  Any help would be appreciated, thanks.

  On this virtual path, it is not easy to offer the exact diagnosis, but of course, there must be a problem with the HARD drive. Can you get a second one for test purposes and exchange it. Just to be sure if the HDD is troublemaker.

  But there is something else:
  > I made a Windows 7 recovery disk using my other computer acer laptop...
  Sorry, but I don t understand this. Can you please explain what you did exactly?

• Vista recovery disk does not work

  my recovery for a6057c disk will not work after that I used the NeoSmart
  recovery disk.

  After logon to Vista I see that empty office, I can access the task
  Manager by CTRL - ALT_DEL.manager.

  Windows and all my files are on drive D and my C is the drive has nothing on this subject now. I'd do it
  I just want to make a disaster Recovery and
  all over again with new factory. Does anyone have any ideas?

  I now remove the prtition C on my drive.

  Vista still labels the d drive, I have no C?

  I found the answer on the Microsoft Knowledge Base.

  Item number: 947288 primary partition drive letter designation is lost when you use WinRE to repair a GPT in Windows volume

  The article is also for Vista.

  Article ID: 223188 How to restore the drive letter of the system / boot in Windows

  Would do the same thing.

  I took the article to use regedit to swap my C & D return records.

  Now windows Vista starts OK. (All I had before was just an empty office).

  I also received my HP Factory disaster recovery disks it looks they will work if I need.

• I'm trying to recover my Windows Vista, but one of my #2 recovery disk does not work... What can I do?

  I copied 2 cd on my hard drive disk recovery & disk #2 does not work. I tried to get through the system recovery to restore the computer to its original factory shipped State. It calls into original form and content reinstalles. Then it restarts to finish and said: ERROR LOADING C:\PROGRAM FILES\WINDOWS MEDIA PLAYER\wmssetup.dll THE SPECIFIC MODULE COULD NOT BE FOUND!

  THEN IT CONTINUES TO THE NEXT WINDOW WHICH SE BED:
  INSTALL WINDOWS
  WINDOWS COULD NOT PARSE OR PROCESS UNATTEND ANSWER FILE FOR [SPECIALIZE]. THE SPECIFIED IN THE ELEMENT OF THE RESPONSE [MICROSOFT-WINDOWS-DEPLOYMENT] FILE.

  AFTER THIS WINDOW IT SAYS PRESS OK BUT MY LAPTOP DOES ME NOT LEAVE THE REST OF THE ARROW IN THE MIDDLE OF THE WINDOW & WON'T LET ME CLICK ON IT! WHAT CAN I DO TO GET THROUGH THIS PROCESS!
  YOUR HELP WOULD BE GREATLY APPECIATED! THXS
                                                    

  Contact the computer manfacturer, who provided the original discs.

• Recovery disk does not start

  I'm helping a friend with his HP CP61-313US laptop. Somehow, it's not boot from the hard drive. It attempts to load Windows, then crashes, gives me the black screen where you can choose the safe mode, safer networking, etc.

  He will not start in safe mode or other options. It does not start from the last good configuration.

  I ordered the HP recovery discs and disc inserted one of the stimulus. It won't boot from the CD. I went into the bios options and set the CD drive as the first option. I did both of in the settings BIOS F10 and F9 startup command settings. I hear work the CD player, but he keeps trying to boot from the hard drive.

  I never get a message that says something like "press any key to boot from the CD-ROM."

  Is there anything else I can do to force startup from the CD/DVD?

  Is it possible that I can copy this HP on a flash drive recovery myself and try to boot from a flash drive. I guess it is possible that the DVD/CD player is broken. My friend who owns the computer used rarely to the reader.

  Is there some other bios setting I can use? Either by the way, I ran the memory and hard drive diagnostics and they passed.

  I have determined that the DVD drive on this laptop is bad or is about to fail. I tried to create a Windows repair CD and was able to read the CD. It would give me the message "Press any key to boot from CD or DVD" that I was not getting with restore disks factory HP. I put restore HP factory disks in another computer and tried to copy them. I thought that, perhaps, if my drive was any failure there is something on the factory records it would not read but maybe a freshly burnt disc copy can read. It would be almost from the start. He would try and then getting errors of e/s on the copied version of the disc. I came to the conclusion that I could find other uses for a drive DVD external USB and since they were only $40 I have advanced and bought a. I now restore since the original HP recovery discs successfully using the external DV

  Key USB D. I had to upgrade the bios to boot from the DVD USB drive, but it seems to work. So you can consider my original request as 'resolved', but I can't speak for other users who have hung on this thread. But if someone has trouble with their discs original HP, I would suggest trying to make a copy of their, and maybe a copy will work. The copy almost worked for me.

• T2135CS satellite recovery disks does not

  Hello, my laptop no longer and I think it's the hard drive, and, the companion disks do not work either. I called Toshiba and they said that it is not taken in charge more. Does anyone have an idea how can I make a boot disk for win 3.1? Thank you, jim

  Hello

  I found a Web page called www.bootdisk.info
  Here you can download pictures of the boot floppies. This is the exe files. Just insert the disc and run the file.
  There are also other types of bootdisks with special features for download!

  Bye Bob

• Satellite P10-304: 2nd recovery disk does not work

  I'm selling my laptop.

  Went to use recovery of original product CD provided along with the PC.

  1 disc worked OK - unfortunately 2nd disc (undamaged) stops at about 60 percent and gives the following message;

  error number 437
  Can not read the file
  version: 7,00 (Apr 2001 19, build 254).
  License: XQ199905
  command line arguments: - clone, mode is pload, srx = x: \01367000.GHO:1, dst = 1:1 - batch

  PROG mode: prog_local
  Name of the path:
  dump file: x:\01367001.GHS
  dumpPos: 0
  flagexplode: 10

  State of IRQ of mouse: no IRQ (0)

  Help, please!?!

  I have a buyer waiting and everything seems to be Dutch!

  Hello

  It's not easy to say what's wrong with the 2nd recovery disk.
  I would recommend formatting the HARD drive completely and try again to recover the operating system. If it doesn't work, well try to contact Toshiba. Here, you can order the recovery CD. Maybe the problem of recovery will be solved as a gesture of goodwill.
  Nevertheless, the recovery cd is not expensive.

• C870-121 satellite recovery disk does not work?

  Hello...

  I have a weird problem, I bought the computer 6 months ago and have been happy with it, but I'm protected by a kind of virus and all the operating system has been * ed big time, so yesterday I want to da a factory install with recovery disks that I created when I bought the computer.

  I have the Toshiba system recovery DVDs 4 disc, I insert the sytem disc and look as it should, it loads and then it ask disc of recovery disks, insert disk 1, and after 10 seconds it ejects again and claim a disc again.

  I checked the 5 discs on my other computer and there are data on them and they look good, I tried to insert the discs to see if I'm past them when I printed on them, nothing works, it simply will not recognize disc and I'm stuck? Any help from anyone?

  I'm sure that's not material that are bad, because I had an old windows XP disk, and after that I tried everything, I tried to install on the computer and everything was fine, but I would like to have windows 7 as the computer came with...

  Regards Allan Thomsen

  Hello

  Very strange boyfriend
  Would it be possible that the CD/DVD drive is unable to read the first disc correctly?
  I mean, maybe it's a disk problem and not the problem with the data

  I don't know what's wrong here, but you have some a lot of m options here:
  To recover the laptop, you must use the Toshiba recovery disks or HARD drive recovery
  You can use the HARD drive recovery process?
  Turn on the device, press F8, choose fix my computer-> drive HARD recovery.

  If this is not possible? Well. You can always order a new disc here:
  http://backupmedia.Toshiba.EU/landing.aspx