G7-2269wm: network driver missing adapter

Similar Questions

• Mini 210-2130NR: impossible to connect to the wifi network driver missing

  I recently did a clean Windows 7 on my mini installation because the upgrade of Windows 10 left essentially unusable. I managed to install windows 7 Professional on this topic but I am not able to connect to my wifi to do updates. In Device Manager it says missing a network controller and video controller. I was able to find an adapter (Realtek PCI FE Family Controller) but I need help to find the others. I tried looking for drivers available under my product on the HP site, but she had something specific to Windows 10.

  Device Instance path:

  Network controller: PCI\VEN_14E4 & DEV_4727 & SUBSYS_145C103C & REV_01\4 & EDE306C & 0 & 00E0

  Video controller: PCI\VEN_8086 & DEV_A012 & SUBSYS_1584103C & REV_00\3 & 21436425 & 0 & 11

  Thanks for any help!

  Hello:

  You need these drivers...

  Network controller:

  This package contains drivers for the Broadcom Wireless LAN Server supported in models cards mobile supported and operating systems.

  File name: sp57965.exe

  Video controller: you have posted you are running W7 64 bit, but your laptop came with W7 32 bit.

  You must use the driver directly from Intel 64-bit for the 64-bit version.  a 2nd on the list.

  Note: I think the Intel driver site is messed up because when I click on the link to get the driver, nothing happens, and this happened to me twice today.

  You may need to wait until after July 4 holiday to get the driver if you have the same problem.

  http://www.Intel.com/content/www/us/en/support/graphics-drivers/Intel-Graphics-Media-Accelerator-3150-Intel-GMA-3150.html

• HP pavilion g7-131ous: network driver missing

  Hello

  I replaced my hard drive and windows 7... but now, the network controller driver is missing.

  When I did a search an entire list came have idea that to install.

  Please help, thanks...

  HP Pavilion g7-131ous

  Hello:

  You need these drivers wireless and bluetooth for wireless card model that your laptop is...

  This package contains drivers for the Broadcom Wireless LAN Server supported in models cards mobile supported and operating systems.

  File name: sp53663.exe

  This package contains the Broadcom Bluetooth driver and software for models supported that are running a supported operating system. Broadcom Bluetooth 4.0 driver is required to enable the Broadcom Bluetooth 4.0 devices and is compatible with Broadcom Bluetooth 3.0 and earlier versions.

  File name: sp55079.exe

• 5901tw flow 8: [Please help] unable to connect to 4G network card, driver missing HUAWEI Mobile Broadband Module

  Hi all

  I just bought 8 streams HP 5901tw 4 days ago, yesterday, after internet connection using my card of 4G (WWAN driver) in my Tablet 8 Stream, suddenly the internet connection dropped and I lost my 4 G network card. I don't know why it happens by itself. But for connection Wifi still works well and wifi interface is always detected in network adapter but 4G is missing from the list.

  In Device Manager I see list of pilot missing in other devices-> HUAWEI Broadband Driver Module is missing from my Windows with Bing 32 bit OS 8.1. I try to find the driver through windows update, website of hp or other sources, but is not found. I also tried to update the BIOS firmware to the latest version and upgrade of such software firmware driver LAN, etc. from the HP Web site, but still can not fix missing pilot of the HUAWEI Module of high speed.

  I also try reboot several times, making recovery, but still having lack of driver for HUAWEI ADSL Module.

  Last effort, I try to current level Windows 8.1 to Windows 10, but still no conclusion success lack driver HUAWEI or fixing my 4G network missing question.

  Now I can still connect to the internet with my 4 G card more every trip.

  Someone there solution and how is address/where to download those missing 4 G network driver (HUAWEI ADSL Module) 8.1 for Windows or Windows 10 HP 5901tw 8 streaming?

  Really appreciate for any help and answer including HP support.

  It's really annoying to have this problem and get stuck without a solution. I just enjoy this new Tablet HP for 2 days and now unable to connect to the 4G network more.

  Thank you.

  Kind regards

  Wachyu

  I finally found the problem with the HUAWEI ADSL Module in my stream 8 HP (after 2 days of sleep trying to install and uninstall the driver and try all options).

  It seems maybe some Windows Update or a driver is trying to change the firmware inside the card top debit MOBILE HUAWEI to download mode (VID:12 d 1 PID:1568), so it can't use any driver installed in point 8.1 of Windows.

  I tried to manually change the download mode inside the HUAWEI tools firmware: Revskills (B. Kerler credit) return to the standard mode and then reset, then the Device Manager will detect again under the new material in NIC as HUAWEI Mobile Broadband Module (VID:12 d 1 PID:1570) and automatically installed its driver from Microsoft.

  VOILLAA, My Mobile Broadband can now be re-used to connect to Internet and now also presented in the connection.

  A lot of delicate here to force Windows using HUAWEI driver to use the COM Port to communicate with the card mobile broadband HUAWEI inside and then using Revskills tools to change the mode to return to standard mode.

  If someone knows this problem and wants my help, just ping me and I'll be happy to help you in the orientation.

• Teredo Tunneling network driver. How to reinstall the missing driver?

  Description of the system: Vista Business; Trend Micro

  I was getting an error (triangle) in Device Manager and could not update the Teredo tunnel network driver, so I uninstallled thinking she would be automatically reinstall when I quit and restart. Unfortunately, he didn't like that. The pilot is now missing and I can't go online (I use another XP PC to write this note). PS: If necessary, I can have access to another PC in Vista Business.

  How can I go about restoring the missing driver? Thank you

  I called Technical Support from Microsoft (paying). It turns out that this 'Teredo nickname Tunneling (something)"card network is not necessary.  I plugged in the RJ45 on another port on my router and rebooted the PC. I now get access i.e. connectivity to the internet. I checked the Device Manager. It is no longer a "Teredo nickname Tunneling (something)" listed under "Network adapters" network card in Device Manager and I no longer get an error message about the Device Manager.  Detective Conan.

• Network wusb300n wireless adapter creates test.txt on my C drive

  Hello.

  The software of network WUSB300N wireless adapter/monitor creates the file test.txt on my C drive.

  This file is required, and if not, how can I stop this generated file?

  Thank you.

  Thank you. It has worked flawlessly. I'll just use network monitor in Windows, rather than the LinkSys one.

  Thanks again for your help.

• System froze for a minute while searching for a missing network drive

  When, for example, browse the files in the Windows Explorer home & network is disconnected, the system tends to freeze for half a minute, as it is waiting for the sharing network address. No processes are active in the Manager of tasks (idling only), but the computer is devoid. This happens on any PC, computers cell phones not only. Does anyone know how to get rid of this behavior, or at least to shorten the waiting period?
  There is a solution to disconnect network drives, but I would like to find something more simple.

  Hello

  Looks like you have mapped some network drives to your operating system.
  I think if you're looking for files or something like that OS trying to get permission to search or enter the network drives.
  But if the network is disconnected from the operating system takes several times to see that.

  I put t know if there is a solution for these issues. But try to google for more details. Maybe you about success. Please report if you find useful information

  Good luck

• G6-1b53ca Pavilion: pavilion g6-1b53ca network driver

  Hello! This is my first post and I have no doubt that one of you has informed the guys will be able to help me!  I reinstalled win7 Home premium & was surprised that some drivers were missing. I am unable to get online without network driver.  HP Pavilion

  G6-1b53ca. I found a driver sp55083.exe realtek & hoped it would be ok? Any help much appreciated.

  Dave w

  Hi, Dave:

  You need the driver for the wireless adapter:

  http://h10025.www1.HP.com/ewfrf/wc/softwareDownloadIndex?softwareitem=ob-111716-1&cc=us&DLC=en&LC=en&OS=4063&productOid=5118991&sw_lang=

  You need this driver for wired (ethernet):

  http://h10025.www1.HP.com/ewfrf/wc/softwareDownloadIndex?softwareitem=ob-100084-2&cc=us&DLC=en&LC=en&OS=4063&productOid=5118991&sw_lang=

• Windows 7 in Parallels 5 - network drivers missing

  I a27"iMac (new Dec. 2009) and you have installed Parallels 5. I installed Windows XP without incident and then proceeded to upgrade to Windows 7 Home Premium. Windows 7 is a compatibility check and found that there is no network adapter.

  I proceeded to the installation and do not have access to the internet. the error message is that a network adapter is not found and miss me the network driver.

  Is there a driver for Windows 7 on a virtual machine (Parallels 5) running on an IMac i7 27 "?

  Thank you

  Grover

  Looking for a Vista driver, that should work.  If there isn't one, as you've discovered, XP drivers generally does not work in Windows 7, so I'll keep my fingers crossed for you that you can find a Vista one.

• How can I connect my Mac to a network server? As in windows yo go to my computer / connection to a network drive, and then you select a letter and write the name of the server that you want to be logged

  I'm trying to adapt Windows to my new MacBook Pro with OS El Capitan.

  I work remotely for a company and I want to connect my Mac to the server of the company.

  My question is how to connect a MAc to a network drive with the permanently available connection.  For example, in my old HP I went to my computer / connection to a network drive. I've selected a letter and note the name of the server that I wanted to be connected to. The connection was then shown with my other drive hard 'sections '; I want to say C:, D: (for recovery), e: (for tools) and then connecting to the external server has been shown with the selected letter.

  There is no "letter" under OS X. It's a hangover very old of BACK, devices of mapping and volumes labeled mailbox.

  If you are connected to your corporate network, you should see the available network volumes listed in the Finder, in ' my computer > network ", or with the command K to connect to a server.

  You can create an alias for the volume and put it in the Dock, or leave on the desktop or put it somewhere else, and the next time you want to connect to this subject, simply double-click on it. You can also add the server address to your "favourites" in the connect to Server dialog box.

• Pavilion g6-1d70us network driver problems

  I really need help.i have just installed Windows 7 Home premium on my Hp Pavilion 1d70us g6, but im having problems with its pilots, the Ethernet controller, Bus controller and pci simple communications controller. I can't find these three drivers. I tried to install almost every displayed on the Hp.com drivers network driver. but no cure

  Hello

  Please post the ID number of device here is how you can find.

  In the Device Manager menu, regardless of the way you have to, find the driver that is missing (no yellow question mark).

  -Right-click on it and select "Properties".

  -In the Properties menu, click on the tab "Details".

  -In the Details tab, click the menu drop down and select "Device Id".

  -When you have this submenu opened below, you should see one sentence that contains a couple of things you need.
  -C' is what it would look like for example:
  -PCI\VEN_10DE & DEV_03D1 & SUBSYS_14041565 & REV_A2 (could be a couple extra rows with some similar stuff, but the main things you need are the FRI and DEV).

• HP 750 055xt: clean install / desire / network driver problem

  Want to 750-055xt. Bought as a refurb. SSD is small, so I put more in and did a clean install with Windows 7 Professional.

  Internet - network driver problem does not connect and I see that the drivers are missing. I tried searching the site, but I can't find the driver.

  It's not a hardware issue because I can put the other drive and it works fine.

  I am struck an impasse with the search tool. I need to copy the driver on another computer to move.

  All of the suggestions.

  Thank you.

  Hello:

  Page for your model motherboard plug indicates that there is a CG-RTL8151GH-Realtek gigabit ethernet card.

  See if the W7 directly from Realtek driver works - 3rd driver on the list.

  http://www.Realtek.com.tw/downloads/downloadsView.aspx?langid=1&PNid=13&pfid=5&level=5&Conn=4&DownTypeID=3&GETDOWN=false

• The directory of the user on the mapped network drive

  I want to move my user directory C:\Users\Edwin to a mapped network drive E: (i.e. mapped from a network share \\\\192.168.22.9\share ).

  The difficult part is to move the directory of the user himself. I found 2 possible solutions, which are not applicable for me due to my use of a network drive.

  1. Move C:\Users\Edwin" to "E:\Users\Edwin , and then use a symbolic link of junction ( mklink -J ) to post a link to C:\Users\Edwin .

     This does not work for me because I can't create a symbolic link to a directory on a non-local drive junction.

  2. Changing the value of registry key HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows NT\CurrentVersion\ProfileList\ProfilesDirectory of %SystemDrive%\Users to E:\Users before you create the user "Edwin".

     Later, when the "Edwin" user first connects, the profile will be in E:\Users\Edwin .

  The problem is that I met a problem of the egg and the hen.

  When you first login as a user 'Edwin' profile will be created in E: . However, at the moment I first login, the mapped network drive E: is not there.

  I tried without success to the following:

  1. Create a drive mapped persistent administrator. Did not work. The mapped drive is only visible to the administrator user.

  2. Create a mapped drive persistent using the rights system (using PsExec -s ). Did not work. The mapped drive is not 'owned' by anyone, not even the current administrator user.

  3. Create a drive mapped persistent by using the user newly created by Edwin, without opening a session as Edwin again (using the PsExec once again). Did not work. It is possible to create a mapped drive under a different name, once I tried to do it with persistence ( /persistent:yes ), I get a Access is Denied error.

  No idea how this can be done? Or is it it even can be done at all?

  Hello

  What version of Windows are you using?

  Related topics:

  http://social.technet.microsoft.com/Forums/windows/en-US/9389cbc5-4e4f-4f4c-83fd-4ab8fdec51ec/not-all-network-drives-reconnect-when-windows-is-switching-automatically-from-offline-to-online?forum=w7itpronetworking

  http://social.technet.Microsoft.com/forums/Windows/en-us/60a5e7b0-c972-416F-B24C-b7d4018156cc/Windows-7-missing-mapped-drive?Forum=w7itpronetworking

  Try to repost the question to the TechNet Networking Forum

• I can not see some files on my network drive, but can browse their

  Hello
  One of our users are their files and missing files after the letter 'F' on their network drive. I checked on the server, and the files are missing on the server. However, I can browse to and open them. When I look in the windows explorer for this user, I do not see the folders and files passed letter 'F' But if I know the name of a file or folder that is there and manually type the name in the address bar, I can browse on him. For example, there is a folder named IBM. I see not the folder in windows explore. But if I type in the address bar (\\servername\username\IBM), I can see the contents of the file. If the files are there, but we cannot see them. So far only this user is having this problem isn't a question broad system.

  I activated the hidden file parameter and it is set to show the hidden files and folders. The server is a windows 2003 SP2 Enterprise

  Thanks for your help

  In the Explorer of-> tools-> view (tab), Folder Options->

  In addition to checking "Show the hidden files and folders", try unchecking the "Hide protected operating system files" two lines down.  It will ask if you are sure you want to do this - simply replies 'yes '.

  If it turns out that the system attribute has been applied to the file, you will not be able to change it in the Properties window.  You will need to use the "Attrib" command  See the following procedure article:

  «You cannow view or change the read-only or system attributes of folders... under Windows XP...» »
     <>http://support.Microsoft.com/kb/326549 >

  HTH,
  JW

• Card wireless Stick as a network drive?

  I apologize if this has been asked before.

  I tried to configure my 16 GB Stick wireless as a network Player Windows 10.

  The only problem is that he isn't report to the correct size, and I also get a weird error trying to move on all documents.

  I just wanted to do this for the sake of convenience, but I begin to think I still have to go through the web interface.

  Is there something I'm missing?

  

  Thanks in advance.

  This product does not support as a mapped network drive. WiFi access on a computer is limited to the web interface.