G70 screen resolution will not change

Similar Questions

• HP Pavilion 15z Touch: screen brightness will not change

  When I use the keyboard commands to adjust the brightness of the screen, it does not work. When I go into the control panel to set the brightness of the screen remains the same. The adjustment bar will move from dim to bright but the brightness of the display will not change. How can I fix it? I've only had this computer for 4 days, so everything is still at the factory.

  Hello @KayLeeM,

  Welcome to the Forums of HP Support! It's a good place to find the help you need, so many other users, the HP experts and other members of the support staff.

  I came across your post about the brightness of the display and wanted to help!

  Try searching for the Device Manager in the Start Menu.  Then expand the monitors section and see if you have an option for Generic PnP monitor.  If so, do a right-click on him and generic PnP monitor enable, if not already.  Now, check to see if you can adjust the brightness.  If you're still having problems, then try to see the following resource and let me know how it goes:

  Difficulty of Windows 10 brightness control works not problem, here's how to [Guide]

  (Not a HP website supported).

  Please let me know if this information has been helpful by clicking the thumbs up below.

  Kind regards!

• WIN7 NEW DESKTOP - SCREEN RESOLUTION WILL NOT BE PROGRAMMED IN TRUE COLOR (32 BIT), REQUIRED BY THE E-MAIL PROGRAM

  bought a new ACER, desktop win7 Wal-Mart 2 weeks. My e-mail program & my financial pgm are not good on the monitor. Determined that the screen resolution should be set to True Color (32 bit), 256 not. Reset, click on APPLY and clicked on Yes, I want to change this setting. Programs has worked. Private messaging pgm (JUNO.com). When I reactivated it, I have to go through the whole process again subject parameter True Color 32 bit.

  How can I set this up so that the resolution is still putting in true color?

  It works fine on my Toshiba laptop with win7.

  Tom Finnegan * address email is removed from the privacy *

  bought a new ACER, desktop win7 Wal-Mart 2 weeks. My e-mail program & my financial pgm are not good on the monitor. Determined that the screen resolution should be set to True Color (32 bit), 256 not. Reset, click on APPLY and clicked on Yes, I want to change this setting. Programs has worked. Private messaging pgm (JUNO.com). When I reactivated it, I have to go through the whole process again subject parameter True Color 32 bit.

  How can I set this up so that the resolution is still putting in true color?

  It works fine on my Toshiba laptop with win7.

  Tom Finnegan * address email is removed from the privacy *.

  True color is actually 24-bit.  32-bit is True Color + Alpha channel.
   
  Understand the brand and model of the video card (as a processor nVidia or AMD/ATI - but which model) then get the latest video card driver and install it.

• BlackBerry Q5 display on lock screen wallpaper will not change (with aprental controls off-road and without)

  The following took place in my quest to solve the meanless screen too high.  That's why I serched for several Blackberry World and internet screen savers.

  At some point, I downloaded a wallpaper of the internet where I have the image itself has been doenloaded in images and from there I clicked it and got options to use as paper screen wallpaper and wall of a lock.

  Later, I found the other wallpaers and succeeded him.  However, it has not changed the lock screen wallpaper.

  I did it with the parental control is turned off.  Later, when I changed the wallpaper that's not going away from the lock screen, the icons were changed and new wallpaper was left out leaving a black background.

  But this process has not changed the lock screen.

  I deleted the uploaded image independent of photos and the lock screen still shows the wallpaper I'm changing.

  Any suggestions?

  Thanks, I've thought about it.  It's the fact that the original file was set as wallpaper screen and lock of bot.  I changed just walpapers thanks walpaper software added to the Q5.

• Windows 7 has changed after the Automatic Updates - screen resolution may not change back

  Last night was automatic updates from Microsoft.  Today, the resolution of the screen and the icons are huge.   Tried to change the resolution of the screen through Control Panel but can not find the same as before.  I tried to adjust the zoom level on Chrome but now everything is long and lean.

  Tried to do a system restore, but it has a red x next to it and will let me not turn it on.  How to restore my resolution wallpapers and icons to their previous size etc?

  Completely, remove the current (or software) driver and install the latest driver available.  For instructions on how to do read everything to update the drivers of my partner JMH3143 http://answers.microsoft.com/en-us/windows/wiki/windows_other-hardware/updating-a-driver/a5e6345e-af9b-4099-bef0-8d22254aa1c1?tm=1436753520149 here

• Screen brightness will not change

  Greetings.  I have the model SVE14A35CXH.  A new problem has arisen today: I can't set my screen brighntess.  It does not solve with manual controls (i.e., using the function key, or by accessing the settings of the bar charms, or by the 'Power Options' Control Panel).  Moreover, I observe without changing the brightness of the screen during the occultation/increase in ambient light, despite the fact that I have activated in the VAIO Control Center of automatic detection of brightness.  I am running Windows 8.1, and all of my updates seem to be current.  I would be grateful for any suggestion.  Thank you!

  Hi cjwinchell,

  How about turning off auto brightness in Vaio Control Center then manually changing the brightness? It work? Please provide us with the information we provide the correct solutions. Thank you!

  ~ Mark

• Fund and screen savers will not change.

  Original title: Operation Catalyst Control has stopped working. I can't select a settings or screensavers, but only the color of the background!

  All funds and screen savers still show in my control panel;

  However, I'm unable to change on my computer.

  Message says "the catalyst control center has stopped working"

  Have you tried wverything including yo recovering an earlier date.

  This can be corected and, if so, how to do for a person to computer unsophicated?

  Thank you very much!!!

  Hello

  1. which version of the operating system you are using on the computer?
  2 did you do changes on the computer before the show?
  3. What are the steps you tried?

  You can update the graphics driver and check if it helps.
  Windows 7
  See link: http://windows.microsoft.com/en-US/windows7/Update-a-driver-for-hardware-that-isn ' t-work properly

  Windows Vista:
  Check out the link http://windows.microsoft.com/en-US/windows-vista/Update-a-driver-for-hardware-that-isn ' t-work properly

  Windows XP:
  See the link: information about the hardware devices for Windows XP drivers
  http://support.Microsoft.com/kb/319908

  Provide us the information to help you best.

• I have Windows 7 and I would like to know why my screen resolution will not remain when I put it?

  I need to know why there is above all the resolution of my screen jumps in and out?

  Then, I would like to know if anyone can tell me why my monitor

  He died after I turn it on?  Help

  Try:

  • Install the latest Windows 7 drivers for your graphics card;
  • check if your display requires specific drivers and if so install them (some views just use generic plug & play those)
  • check that the video cable is connected properly;
  • check that your graphics card is pressed fully home in its housing and that the necessary extra power cables him arae connected;
  • check that all the fans (CPU, graphics card, case - where they exist) are working and that the air vents are free of dust and debris.

• Portege M700 will not change the screen orientation

  I installed the driver for the webcam for the M700, and every time I install it, I get the same error message:

  "Open Webcam driver fail - please restart camera or computer."

  I reinstalled the drivers of many times, and it still does not work.

  Therefore, I tried the msconfig method, disabled all the startup process and then reactivated their.

  The webcam shows the same error message, and now the screen will not change orientation when I rotate the screen.

  You try to use Windows XP Home edition or what? Generally, each laptop comes with preinstalled and configured operating system.

• Windows 7 splash screen will not change after the vista update

  After updating vista 32 bit to windows 7 32 bits, the splash screen will not change and he showed the vista boot. I read a lot of forum and the web page, but this solution:

  «.. . the dummies and bad start screen for Windows 7 is due to the locale entry in the startup folder, which could not be set when editing or rebuilding the BCD. When the locale is not found, Windows boot loader doesn't know what local startup folder to look for the animated bootscreen. Thus, in order to fix the boot screen so that the splash screen can be re-established, restored or reset to original animated Windows 7 boot screen, just run one of the following commands at the prompt with administrator rights:

  bcdedit/set {current} settings regional en-US

  or

  BCDboot % WinDir % / l en

  Change the US to the language version of Windows 7 installed, as ja - JP, en - us, es - ARE, pt - BR, zh - CN, zh - TW, fr - FR, fi - FI and etc.

  Restart the computer after running the command to see the new boot UI (user interface) be used again. To check if the locale has been entered properly, just run the bceedit command in the command prompt that is running as an administrator... »

  not solved my problem and also know for many users... after updating vista in windows 7 splash screen stay the same...

  Thanks for your help
  Hispanico hispanico

  Hi hispanico,

  Thank you for visiting Microsoft Answers.

  I suggest you do a repair from WinRE (Windows Recovery Environment) system using a Windows 7 installation disc. Follow these steps:

  1. turn on your computer, insert the Windows installation DVD, and then restart your computer.

  2. Press any key when prompted to do so and follow the instructions that appear.

  3. when the Windows Installer page, click repair your computer to access system recovery options.

  4. follow the instructions.

  Please visit these links for more information on the Startup Repair:

  1. http://windows.microsoft.com/en-us/windows7/Startup-Repair-frequently-asked-questions

  2. http://windows.microsoft.com/en-US/windows7/What-are-the-system-recovery-options-in-Windows-7

  Kind regards
  Amal-Microsoft Support.
  Visit our Microsoft answers feedback Forum and let us know what you think.

• bugs? resolution of reading will not change?

  The resolution of reading will not change no matter what I choose? It can contribute to the distorted playback issue im having? also when I select a clip from the project Navigator or the media sequence starts automatically in arri editing mode? I move to the digital SLR, but playback worsens.

  Win 7
  64

  gtx780

  Hey just launched cc2014 after re-installing win7 loooooooong history exahsting

  CC seems to have a good preview window and some offers quality now!

• My your whatsapp will not change after update

  I'm back changing my tone whatsapp after the update, but it will not change back

  Greetings, cazrose. Thank you for the communities of Apple Support!

  I see that WhatsApp is not allowing you to change his ring back to what it was after upgrade your iPhone to iOS 10 6s. I'll be happy to help you!

  How can I change my ringtone for WhatsApp? -Follow the instructions of the support that I have found on the site of WhatsApp.

  Have a great day!

• How can I change my country when I have a balance that I can't buy anything with? It will not change me cause I have a balance of 0.07 pence

  How can I change my country when I have a balance that I can't buy anything with? It will not change me cause I have a balance of 0.07 pence

  Click here and ask the staff of the iTunes Store to zero the balance of your account.

  
  (142584)

• Satellite Pro L450D black screen and will not respond to any keys

  Hello

  My niece has used his Toshiba L450D for almost a year now and he really liked it, who was until last month. She turned on her laptop and when she presses the button of the mouse, the button cracked and he fell into the laptop.

  Now my brother contacted Toshiba and I was told because it is under warranty it might return for repair because it was a common fault. Then he he packed in loads of air bubbles and a box to make sure it was safe.

  A few weeks later he came back repaired but we were all shocked that the laptop was put in a very loose box and you could hear this rattling noise. When we turned on the battery was flat and we had a new boot menu.

  As she installed it Windows 7 laptop would boot directly into Windows 7, but now after the repair of the laptop shows a menu black screen with as follows:

  + Windows 7 +.
  + Recover Windows to Factory Settings [active EMS] +.

  So we started in Windows and everything went well, but now after 5 or 10 or even 20 minutes, laptop displays a black screen and will not respond to keys or mouse movement. There is nothing on the screen its just black.

  I started in SafeMode (which was more difficult with the new menu) and it does the same thing. I even managed to do a virus scan quick who took 3-4 minutes and was clean.

  I would like some advice on what my niece is very angry, and it's difficult to explain what is happening to a child in the primary school.

  Any help would be grateful.

  Hello

  Have you tried the option of HARD drive recovery?

  If this is not the case, try to set the notebook back to factory settings using HARD drive recovery.
  Turn on the device, press F12, choose repair my computer, then select Toshiba HDD recovery.

  I hope it will work!

• Icons wiggle and move in the home screen but will not go to the next page

  Icons wiggle and move in the home screen but will not go to the next page

  You need to move to the edge and hold the button for a few seconds so he can move to another screen.