G71, 17 t 17 t touch quad jump: 3 laptops now off the power does not come on

This problem seems strange to me.  My 17 t-J127cl has been slow. I decided to restore to an earlier time. The restore failed. I turned off then and now when I press the power button the cap lock button blinks 2 times. I tried to reset the bios and created a USB and have tried all the suggestions forum without success.

I also have a quad 17 t-j100 with the same questions. So I went back to my G71 and it worked well on Facebook, then the screen went black and then it stopped. Now when I press the power button, the power led on the front edge of bliks 2 times and nothing.

It seems a bit strange that, in computers 3 day 3, die with the same question (s). How can I get these guuys working again and which would be the possible problem?

Take a few suggestions. I tried all of the suggestions of the bios on the hundreds of messages. Computers HP 3 die in 3 days seems a little strange to me. I've had computers forever. I am currently working on an old desktop with XP. This problem could be related to W10 because it is the recent change only I did these 3 laptops.

Jim

Advertisement

Thank you thank you for all your efforts, I'm sorry if it still has the same symptoms, so it is sure that the BIOS is damaged, you will need to replace the motherboard. If the books are in warranty, you can contact HP.

Tags: Notebooks

Similar Questions

  • Portege R700 - Touch Pad, ecoUtility and presentation of the key does not

    Hello

    I got a Portege R700 with Windows 7 64 bit.
    This machine starts very slowly after the log in user mode only.
    The system is waiting for 1 to 2 Minutes before you can work. In administrator mode erverything is fine and fast.

    Thus our directors thought it might be the Toshiba Software and a lot has been disabled or uninstalled.
    Because this did not help and because I thought that it migt be cause of Kaspersky, I started to reinstalled and update the software from Toshiba. Most of it works now. Shortcut keys does not work, then I start TfcRst.exe via autostart now, even he would somehow it would be better in 'systemecommencent '.

    But still some keys do not work. The Tablet touch power switch, just above the touch pad does not work.
    The Fn F9 works. And the two keys to the right upper corner (ecoUtility/off button and the presentation-Key) do not work. In all three major, I get a pop up saying "this function not taken in charge.

    Anyone has any idea of this?

    Thank you

    Solomon_de

    Hello

    Why you n t try to restore the operating system back to the same state until the administrator has removed or uninstalled the Toshiba Software?

    Generally speaking the VAP (value added package) controls the multimedia keys.
    Also the FN keys require the VAP and Flash memory card Support utility.

    Welcome them

  • Satellite W30T-A378 from - touch pad and the keyboard does not work

    I have a problem with my laptop, the touch pad and the keyboard does not work.
    Can someone help me what is the possible cause?

    Thanks in advance.

    Hello

    I guess you checked if the Tablet has been properly connected to the docking keyboard.

    Have you tried to unplug and plug the docking again?
    Note: there is a latch on the left you have to move and in order to remove the tablet.

    Perhaps there is a connection problem.

  • Satellite M70 - 170 - Touch and the launch does not work

    Hello everyone, I'm Sylvain and I'm french, so sorry for my English...

    I have a Toshiba Satellite M70-170, and I have a problem with the program "Hit and run" (1,2,9,0)

    I see the icon then the clock and I can change the settings, but when I press the button of the mouse will work, but not to the touch and launch...

    Can you explain why?

    I love this commercial and I want to know why it does not work.

    I put t know why the touch & launch does not work, but I would try to reinstall again.
    The Touch & launch is placed on the European driver Toshiba page.
    This time it s a v 1.2.9.0 for Win XP.

    Uninstall first touch & launch and after restarting again install it again!

  • Satellite M30X powers off the power when you touch the USB port

    Hello everyone, just registered and it is the first problem:
    As there is no general hardware forum, I post my problem here.

    I got it twice, my laptop
    (Product: Satellite M30X, Version: PSA72E - 008010GR) just went completely off.

    Motherboard:

    NorthBridge: Intel i855GME
    SouthBridge: (ICH4-M) of 82801DBM LPC Interface Bridge
    Motherboard model: Toshiba EAL20

    USB:

    82801DB/DBL/DBM (ICH4/ICH4-L/ICH4-M) USB UHCI controller #1-3
    Version: 1.0
    Interface: UHCI
    Frequency: 48 MHz

    82801DB/DBL/DBM (ICH4/ICH4-L/ICH4-M) USB 2.0 EHCI controller
    Version: 2.0
    Interface: EHCI

    I have the latest Intel Chipset drivers installed and Windows XP Home SP3 with all updates.

    Once when I hit just the back USB ports with a USB plug, the other time when I unplugged my bluetooth key (climbing din't remove it).
    There was no blue screen or message of any kind, not even in the registry after you start the system again or this fatal system error box when you start after a system error.

    Just a total failure. But it works fine the rest of the time. I also tried to remake the script, but it didn't work.
    I have cleaned with a vacuum cleaner to remove dust and has taken a good look, but saw no difference to the side track.
    Maybe the clamps of the wand to shield a little more out to the contact pins on the rear.

    What bothers me a bit, it's some time ago, I had the laptop one computer my knees and I forgot that a memory stick has been connected to the rear. The stick was pushed up and was slightly damaged.
    Still works well. Now for me, that I broke the USB port Insider somehing.
    I could not determine also the loose parts or unfirm at all.

    Y at - it there, diagnostic software that measures the motto of the port or power problems?
    I have a multimeter, fetch short-circuits with it?

    I saw a package of drivers Intel for USB 2.0 over there, but I can't find it on their page, advice?

    Thank you very much for your help, I just wanted to update my RAM and now I am not so shure if my laptop will last the next week.

    Fabian

    Hello

    I put t know any diagnostic software that could analyze this question, I think that a technician of the ASP may be able to provide exactly this question results

    > What bothers me a little is that some time ago, I had the laptop and my knees and I forgot that a memory stick has been connected to the rear. The stick was pushed up and was slightly damaged.

    I think this might be the reason why the laptop stopped while you touch the USB port eventually ports were damaged by using the memory stick, this could cause the laptop off

    However, what we can do is to provide some suggestions and assumptions
    It you want to know why this is happening exactly, then you need to contact a technician laptop for a control.

  • iPod Touch 6 (bought new 5 months ago) stops and does not restart and battery does not charge.

    iPod Touch 6 stop at 14:00 hours today.  Impossible to re - start the machine.  connected to the charger and nothing that.  the unit was purchased 5 nine months ago.

    Try:

    - iOS: do not respond or does not light

    -Also try DFU mode recovery mode post-test

    How to put iPod touch / iPhone in DFU "Karthik doodles."

    -If failed and that you cannot completely turn completely the iOS device, leave the battery to drain completely. After loading a hour repeat the foregoing.

    -Try a different cable

    -Try on another computer

    S ' there is still not successful that usually indicates a hardware problem and an appointment at an Apple store Genius Bar is in order.

    Shop Apple Store - Genius Bar

  • Smartphones from blackBerry Torch 9860 to the touch of the screen does not

    Dear all,

    I Torch 9860 and facing a serious problem is the touchscreen always due to a malfunction "a little bit of work and some does not" all keys work well, I removed the protector of screen touch and connected my phone to my PC via USB and updated its software via BlackBerry Desktop Software and the problem still exists.

    Kindly help on this problem,

    Thank you

    Kamel

    Hello and welcome to the community!

    I recommend that you try to start safe mode:

    • KB17877 How to start a smartphone BlackBerry in Mode safe

    It will take several attempts to get the combination of keys ESC (press/release/hold) OK, so be patient. When properly in Safe Mode, see what happens.

    If the behavior continues, then well... think what happened just before this behavior started? A new application? An update? A theme? Something else? Think carefully that the slightest change can be causal... and try to undo all that was.

    But if the behavior continues mode without failure, you may need to consider more drastic measures - WIPE, OS Reload, BBSAK Wipe/Reload and the process of reloading OS 'skeleton '. To prepare, you should be sure that you have a full backup of your PC... Please see the Backup link in my sig auto on this post for instructions.

    Also please consider it maybe a problem with the hardware... for which no amount of internet-remote diagnosis or solutions at the level of the OS/software will be of no use.

    Good luck and let us know!

  • Touch gesture "pan two finger ' Photoshop cc 2015.1 does not

    Hello

    I use a wacom cintiq 24hd button and after I installed (upgrade) the latest version of photoshop, cc 2015.1, (Windows 8.1) a couple of touch gestures don't work as they should:

    Two fingers to pan and zoom (when using two fingers to or far away, to zoom in or out) works perfectly.

    The two fingers pan does not work: whenever I use this gesture (goes up, down, left or right) I work the photo/painting on shoots off the screen. I have to select the the hand icon and use the stylus to place it in the center of my screen;

    The two fingers of pan and rotation does not work.


    I have not had a problem using all these movements in photoshop before the recent update.


    Is that what I can do on my part that could solve these problems? If someone could help me with this, I appreciate it a lot.


    Thank you

    JerHopp

    Hi JerHopp,

    Try the following steps:

    1. create a Notepad and type:

    # Use WinTab

    UseSystemStylus 0

    Save it as a text file named PSUserConfig.txt

    2. Open Run command and type appdata, and press ENTER key

    3. go to the location:

    Roaming - Adobe - Adobe Photoshop CC2015 - Adobe Photoshop CC2015 settings

    4. move the file PSUserConfig.txt to the folder settings Adobe Photoshop CC 2015

    Kind regards

    Tanuj

  • S400 touch recharges up to 60% and stops / trendy poster does not support

    I bought the touch s400 from Lenovo in last August.

    The laptop charge more than 60%. It says no load connected.

    Any suggestions how to solve this problem. Its really not practical at all because it leaves you with 1.5 hours of battery life. He suddenly could also reject if the battery is less than 30%.

    Thanks in advance

    In the icons in your taskbar (next), you will find the icon of energy management software. I don't remember the name of the application, but is related to energy management.

    In my case, is a red icon with a bike, a car or a plane.

    Open this software. This software manages the plans of the performance of your laptop. There are two configuration options for the battery: 1 - maximize battery life or the maximum duration of the battery.

    Select "maximum battery life.

    All the names that I used are just an example, because I didn't really, don't forget the real names of functions. And I'm in my work at the moment.

    The option "maximize battery life" makes your notebook battery until the 60%. Another option setting your laptop will charge up to the maximum value.

    Sorry for my bad English.

  • BlackBerry Smartphones Pls help me my 9860 touch hangs when boot nd the system does not recognize the usb port when it freezes on startup

    Recently, my 9860 touch starts not finished... It stops at halfway when startup nd freeze... 2ndly starting my system recognizes usb d port, but when it comes to where it stops booting, the system doesn't see it me collapses more so to reload the software

    Hello Dtobs007

    Welcome to the community

    I recommend you try first method Mode without failure. Article ID: KB17877 How to start a mode BlackBerry smartphone without failure.

    Another thread explains how to fix this problem, for your reference.

    By JSanders. http://supportforums.BlackBerry.com/T5/BlackBerry-torch/BlackBerry-torch-9860/TD-p/2597381

    See you soon and good luck.

  • Anyone who touches "House" on the cards does not?

    Whenever I hit "House" on the cards of apple, he asks me to update my info on my contact card. But I did over and over again without success. Does anyone else have this problem?

    Restart your Apple Watch.

    1. Hold down the side button until you see the cursor off the power.
    2. Drag the slider to turn off your device completely.
    3. After turning off your Apple Watch, hold the side button again until you see the Apple logo.

    See if that makes a difference.

    If this does not help, the United Nations associate your watch re pair it with your iPhone.

    Instructions here > pairing your Apple Watch and iPhone

  • Is anyone having trouble with the header does not stay and he jumps back?

    After this last update of Mozilla Firefox my head with persona disappeared. After placing my cursor at the top of the screen it suddenly came back but on a part of it and you can't see my character lighthouse, I chose previously.

    You are welcome.

  • EliteBook 8440p: touch 10, now paved Windows Update does not work

    Hi, please help!

    I've updated the window 10 tonight and things seemed fine. I downloaded a few applications and restart the system.

    When the system came back - the cursor would not leave the top of the screen - flickering along the top edge. The keyboard works, than left and right clicks and the pointing device, but I fing it imposible to use pointing device and as soon as either the touchpad is toched or pointing device is affected as the left and right click - the cursor goes straight to the top of the screen (where the close button) I'm sure you can understand - it is practically impossible.

    I looked at itself if the driver needs to update - it doesn't.

    Can you help me?

    Richard

    Manually, I reinstalled software windows 7 for synaptics (not available later) and is currently working. Will keep my fingers crossed.
    Thanks for your help

  • I have an advent quantum 0200 xp, my cursor keeps jumping, how to turn off the touchpad?

    I downloaded TOUCHFREEZE but I can't open or activate the program

    Hello

    Check with support of the manufacturer system, documentation online or forums that there is probably
    Shortcut keys that enable and disable the touchpad functions.

    Advent Computers - Contact and Support
    http://www.adventcomputers.co.uk/contact-us

    Support of the unofficial advent - Forums
    http://www.adventsupport.com/

    Parameters for TouchPad located in the control panel - mouse (there may be several tabs with TouchPad entered)
    and some come with a utility that loads in the Notification area next to the clock in the bottom right.

    I hope this helps.

    Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle=""><- mark="" twain="" said="" it="">

  • Click on the keypad does not work touch hp envy M6

    Hello

    I used to simply point to any element using the touchpad and a tab and it will open the item but now it has stopped working and I have to press the left hand.  Indices is greatly apprecaited

    Hello

    Thanks for getting back to me.  I got it to work.  I had to:

    1) go to the MOUSE in Control Panel

    2) click 'setting '.

    3) click "Setting".

    (4) check the box 'Tapping '.

    (5) click on apply

    You are finished.

    Ali

Maybe you are looking for

  • Calculate the square of cyclical report

    Hi all I'm acquisition (with USB-6212) a square wave, "100 Hz" with variable right cycle - which can be 20%, 50% or 80% - for decoding issues; the frequency of acquisition is set to 4 k. Actually, I said, frequency is 100 Hz, because I get a front am

  • Pro M177fw MFP stuck on initializing

    Brand new, right out of the box. Here's what I saw: the initialization is not complete, but I can tap on the Home icon. Noticed a symbol above the button of toner. Please I need your help fast. Thank you

  • Japanese IME for Windows XP SP3-

    To make the story short, I had a nasty virus that has swept through my internet connection. I had to use the recovery disc and reinstall everything. Was having a hard time to reinstall Windows XP Service Pack 2 and get the laptop that works properly.

  • Changes in Word, when I enter a character or letter, it deletes the next character

    original title: change in Word I was to edit a multiple page document.  So far, if I add or change a character, he just replaced what I typed.  All of a sudden, when I enter a character or letter, it deletes the next character.  I lose words or lette

  • compare files

    I don't remember the command to compare two folders. I copy files from an SD card on my laptop. 65 files did not copy because the name was too long. I need to know what files copy so that I can rename them with a shorter name. Can someone help me?


HashFlare