G72-a20EM screen has stopped working after updating the BIOS F.48.

Similar Questions

• My HP Envy touch screen has stopped working after an update of the HP Bios yesterday

  Can someone tell me please how to fix my touch screen. I got an HP BIOS update which caused my touch screen to stop working. I tried to re - calibrate the it, but it does not accept my contact telling me that the screen is no longer enabled.

  I tried to find where to turn them on and couldn't find where to enable touch of the finger. I also tried looking for driver updates and driver seems to be up-to-date.

  Thank you

  I have another type of TouchSmart, but this may work for you:

  1. Press Windows + X logo (if you are using a Windows computer 8 - If Windows 7, click the Start button, type Device Manager and click on Device Manager in the results of research).
  2. Select Device Manager from the list.
  3. Click on the small arrow next to Interface devices to expand the list.
  4. Click the touchscreen driver (in my case, Voltron NextWindow touch screen).
  5. Right click and select Activate from the list.
  6. Click Yes if a dialog box asks if you are sure you want to activate the touch screen driver.

  On some models, it is unclear which device in the checklist of the touch screen. I read in other posts that some people have solved the problem by disabling and then re-enabling each device.

  If this does not work, you could try to go to hp.com (http://www8.hp.com/us/en/support-drivers.html) and click on driver downloads &.
  In the search field, enter your product name or number, and then click OK. Select your operating system from the drop down list under Select your operating system, and then click Next. If there is no graphic driver available under Select a download below, click on the plus sign next to the driver - graphics, and then click the name of the driver. In the information and download options window, click Download. Follow the instructions on the screen to download the driver. Restart the computer.

• Receive the error "Windows has stopped working" after installing the update of security for Vista (KB977165)

  I use Vista Business, I installed the update of important security for Vista (KB977165), after installing and restarting my computer, I received an error message that Windows has stopped working and then I get a black screen. I rebooted in safe mode and did a system restored. So currently I did not update.

  This happened to someone else? Is it I can do it fix it?

  Hello

  Since you get such a serious mistake, I would use the free incident reports.

  Windows updates - free Incident report

  Go here and click on-> Windows Update fails while searching, downloading or installation of updates
  http://support.Microsoft.com/GP/wusupport#tab3

  The security updates, you can get free support Incident report
  http://www.Microsoft.com/protect/resources/support.aspx

  I hope this helps.
  Rob - bicycle - Mark Twain said it is good.

• Fingerprint reader has stopped working after update vV1.0.3.49

  I recently downloaded from Toshiba and installed Fingerprint Utility V1.0.3.49 (tc00407400c.exe) and since my fingerprint reader has stopped working.
  The software opens but usually recognizes my fingerprints and can not connect any other way.

  Have uninstalled and reinstalled several times and same result.

  Device Manager says device works ok.

  May I ask what model phone you have and what system do you use?

  Probably, you need to delete stored fingerprints and after restarting again, you should try to register new fingerprints using the software update of fingerprints.

  Have you tried that?

• Adapter Ethernet Thunderbolt has stopped working after update 10.11.2.

  Hello, after my update to 10.11.2 on my MacBook Pro retina 15 "mid-2015, my crush Ethernet Adapter has stopped working. It comes in the reporting system and it shows that it connected to ethernet, but in the network Panel, the State remains red and I don't get an IP address.

  My colleague who has a MacBook 2013 15 "retina Pro also has the same problem. We tried the retail adapters Ethernet Thunderbolt, but still no connection on one of our networks.

  Anyone else see this behavior?

  Same problem here on my end 2013. In Recovery Mode, the card works (good trick to know if hardware is broken). Roll back via Time Machine works 10.11.1 and adapter. Adapter and 10.11.2 relocation does not-MBP-R all my colleagues in different years work well after the update.

  BTW. : not only Thunderbolt Ethernet does not work, but the cards virtual Parallels (for shared and host-only) as well (only bridged mode works).

  So far, all the stuff has failed. And now I will notify again before the update.

• Printer Adobe Pdf has stopped working after update to Acrobat DC

  Hello, I installed Acrobat DC yesterday. Since then, printer Pdf Adobe has stopped working. It always gets stuck to software verification fonts printing source just hangs and I have to force its closure.

  I tried to uninstall the printer and manually install, repair the installation of Acrobat, but nothing has changed.

  So is - anyone help me? Thank you.

  The fixed! So that's how I did it. As I said Distiller crashed when loading fonts. I noticed that, it crashed after loading the "Colonna MT" police, so I removed the police immediately after Colonna MT in alphabetical order. After the removal of the police, everything works perfectly.

  If someone else should be useful, name of the font in question is com (sRB). Don't know why it causes Distiller DC crashing, or why it didn't happen with previous versions of distilling, but that's all.

  Thanks for your help.

• GfxUI.exe has stopped working after rebooting the computer.

  Original title: error GfxUI.exe

  I've been running Vista business for a few years.  Last week, after the reboot, I get an error message that GfxUI.exe has stopped working.  After that I closed the error box, the PC works fine.  I updated the graphic driver Intel, but always the message.  Why now I get the message and how can I solve this problem?

  Hi Kea2300,

  Did you the latest changes on the system?

  This error message indicates to the Intel graphics driver.

  Because you tried to update the Intel graphics card, you can try to perform a clean boot and check if the problem persists.

  A clean boot to check if startup item or services to third-party application is causing this issue.

  You can read the following article to put the computer in a clean boot:

  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7

  After the troubleshooting steps, please refer to clean the boot link to put the computer to normal startup mode.

  Hope this information is useful.

• AutoFit Guest stopped working after update the VMWare Tools

  I've updated Workstation version 8 to 10.  I had several virtual machines of Windows 7 x 64 I then updated with the latest VMWare tools (v9.6.1.1378637).  Now, one of the virtual machines will not automatically resize correctly.  (Three other virtual machines with the same o/s resize correctly and with Windows Server 2008 resizes correctly.)  Workstation is set to Autosize > Autofit guest.  The resized correctly VM before VMWare Tools has been updated.  In other words, the auto resizing feature worked for the virtual machine within the 10 workstation when the previous version of VMWare Tools was installed.  Upgrade VMWare Tools triggered behavior.  When I use the 'Fit Guest Now' view of the virtual machine command flashes but does not resize.  When the my computer window is resized, the prompt is not resized.

  I tried the following:

  • Uninstalled and reinstalled VMWare tools.
  • Confirmed VMWare Tools (vmtoolsd.exe) is set to start automatically and runs.
  • Changed the display of the virtual machine settings to a custom resolution and then to 'host to use setting for monitors '.
  • Attempted to change the resolution of the guest, but he won't go high 1920 x 1440 (it should be set to 2556 x 1496 based on the resolution of the other virtual machines that resize correctly).

  Thanks for your suggestions!

  Update of material compatibility on the virtual machine to which auto resize has stopped working has helped auto resize again.  Hardware compatibility was 6, 5-7.x.  I've updated to be compatible with 10.

  The question remains as to why three other similar virtual machines (with the same compatibility level of 6, 5-7.x) should not be updated so that the automatic resizing to work.

  I didn't want to answer my own question but hope this helps people who have encountered this particular problem.

• Tecra A2: brightness F6 Fn + F7 does not work after updating the BIOS of the screen

  Update bios to 1.40 VICTORY at end of January. Since the failure of keys F6 & F7 then to increase or decrease the brightness of the screen. Is it a coincidence or is that updating the bios the culprit! ??

  Hello

  Usually, the update of the BIOS shouldn't have a bad influence on the drivers of Toshiba and the performance of the operating system.
  There must be another reason the FN key down.

  Initially, I would say to reinstall the common modules. Please check if this will help.

• Function keys row has stopped working after update 10.11.6

  I upgraded my Macbook Pro to El Capitan 10.11.6 last week, and the row function keys have now stopped working.  If someone has had this problem and how can it be solved?

  Thanks in advance for your help (I'm not very tech savvy, so please, responses may be simplistic?)

  The keys work when starting recovery?

  On OS X Recovery - Apple Support

  This is the Office Mac Pro forum. I asked that your post moved to the forum of laptop MacBook Pro or another appropriate forum.

• Buttons radio in the html page generated by cgi script has stopped working after update for Firefox 4 (from 3.6.16).

  I have disabled both of the Firefox Add-ons, I use (NoScript 2.1.0.1 & Ad Block Plus 1.3.6) and restarted the machines, but that has no effect. This problem is repeated on more than one PC, running XP Pro (sp3), Vista (sp2) professional and Server 2003 (sp2), just after the upgrade to Firefox 4, so the problem is definitely related to Firefox 4.

  This could be linked to the new HTML5 rendering engine. To check for this possibility, you can temporarily disable.

  • Open Subject: config
  • In the filter box, type or paste the html5 and make a pause until the list is filtered
  • Double-click html5.parser.enable to toggle it false

  If it works after that, there may be some problems with your form layout (i.e., accepted in HTML4 but not accepted in HTML5), or you may have found a bug.

  This forum focuses on the care of the end user. You can find more help web development on the mozillaZine Web Development Council. Separate forum, separate registration. Please note the advice in the Post sticky at the top of the forum before posting.

• Video (movies/tv/iTunes store previews) in iTunes has stopped working after update 10/12/15

  After update 10 December 2015 for OS X version 10.10.5 - video not playing not in iTunes - no TV doesn't show (time at the bottom of the black screen counter remains at 0:00), movies (video meter at the bottom of the black screen ACCOUNT BEFORE, but no picture/no sound) and no previews film/TV on iTunes Store (time at the bottom of the black screen counter remains at 0:00)

  Hello

  You are not alone! Please visit this community of Apple Support with the link below. And please telephone tech support at Apple and establish a record of the case. The case of several files the fastest, that this will be resolved. It is more likely that the last security update actually crashed the video look at a capacity of iTunes for users of Yosemite. This is a BIG PROBLEM.

  Re: no video on iTunes movies or shows television

• Window XP "Workstation Service" has stopped working after update. Event ID 3113

  Judgment of workstation works on Win XP computer after recent upgrades.

  Can not restart the workstation service. Event ID 3113.
  The observer of events without help.

  LAN Local Area Connection network connection.
   
  Name of the operating system Microsoft Windows XP Professional
  Version 5.1.2600 Service Pack 3 Build 2600

  Check the sfc/scannow for files of error... No.  Nothing obvious in the registry or the firewall.

  Do not reboot or repair either Service Wizard.
  Can not update the IP address.

  Works fine on other computers running XP not upgraded.
  Searching the Internet for answers, seems that this problem exists for some time, but as usual, many complaints, all options, not solutions.

  Seem like it happened on the last update on all versions of M$ for years. Another M$ conspiracy to force users to upgrade.

  Any solutions would be appreciated.
   
  No, I don't want to upgrade to Windows 7 at least a year.

  I solved the problem by reinstalling the client for microsoft networks component in the network connection properties.

• Satellite A100 - screen has stopped working

  Hello

  yesterday in vista, he said that he detected an external monitor, even if I never used any external monitor to my laptop. In display properties, he said I had several monitors and in Device Manager it says that I had a pnp and a monitor not Plug-and-Play...

  The screen has stopped working after a reboot. I see nothing on the screen during the loading process indicating normally the toshiba and the vista loading screen. But once vista has started (the sound still works), the screen works again.

  This has me worried and I reinstalled vista from the cd, but now the screen never... never.
  But I know that vista has been correctly installed that after what he asked, can I still use alt + f4 and enter to stop.

  Well, I can't even make troubleshooting procedures on my own that never, the screen now works. -.-
  Does anyone have experience with this?

  Hello

  I've never heard of such question it s so very interesting to hear about this issue. Given that you never connected an external monitor, it must be something else...
  Did you ever done some update the BIOS on this machine?

  Maybe, if you have some, this could be the problem. Otherwise, I have a work around (it could be useful):

  Remove the AC adapter and the battery from the machine and leave the machine for some time (1-2 hours). Then, start the machine and check if it works.

  If this isn't the case, then you must send your machine to the service since it could be a serious hardware problem (I mean if you really reinstalled vista and problems persist after the reinstallation, then it IS definitely a hardware problem).

  You can also try some update BIOS if it is not already done...

  Welcome them

• My illustrator CS3 has stopped working after I updated my OS to Yosemite 10.10.5

  My illustrator CS3 has stopped working after I updated my OS to Yosemite 10.10.5, but my InDesign and Photoshop work very well. How can I get Illustrator to start working again?

  NOTE: I read a previous thread on the opening of the Java Control Panel in the system preferences (because I installed the new java my computer asked me for marketing immediately after in the new yosemite), but there is no icon Java not found. I installed this new java download more than once and still can not find it. Help!

  olou,

  If the suggestion on possible recording by Larry fails, see this page

  https://www.Adobe.com/account/my-products-services.html

  I'll try to ask a personal forum friend who knows what to do.

  For download, read this

  http://helpx.Adobe.com/Creative-Suite/KB/CS3-product-downloads.html

  and update, see

  http://www.Adobe.com/support/downloads/product.jsp?product=27&platform=Windows

  http://www.Adobe.com/support/downloads/product.jsp?product=27&platform=Macintosh