G72 Pavilion. : no boot device. Insert the disk and press any key

Similar Questions

• Satellite 2140CDS: message: "insert the disk and press a key".

  Hello

  I got this laptop but the necessary update. I tried to put a master drive from my other laptop to update and it came with 'error' and now when I turned it back on it does nothing about it, totally blank and rpet "insert the disk and press a key".

  I've got everything I can think but still can not do anything.

  Please can someone help?

  Hello

  What do you mean with master drive? Do you mean the Toshiba Recovery CD or what?

  It seems that the laptop can not find a source of seed and so this message appears on the screen!

  If you use a FDD drive please check if the disk has been removed.

  You must simply insert your Toshiba Recovery CD and boot from the CD/DVD drive. That's all.

  PS: Check if the HARD drive isn't too bad, as if the internal HARD drive is malfunctioning you will not be able to reinstall the OS from the CD

• Re: Satellite 2450-201: insert system disk and press a key

  Hello

  I have a satellite 2450-201 my hard drive failed and I bought a new one.
  I went to do the installation of the OS that worked very well and cancelled before that I had to commit that I had to get out.

  Tried again and it wouldn't boot from the CD it kepps showing the insert system disk and press a key.
  I have attached my external, a drive with a boot in drive but no difference what I am doing wrong?

  Mark has soon

  Looks like you can't boot from the CD.
  The message insert system disk and press any key any appears because the laptop can not find any operating system and bootable CD.

  Try to insert an original Windows CD and try to press F12 immediately after that laptop was on the F12 key should activate the start on-screen menu.

  Check it!

• Pavilion dv6 - 7095ca: no boot device - insert boot disk and press any key

  
  

  Thanks for your help and please excuse my bad English.
  Please check item 7, if you're in a hurry. This is the point with my Pavilion DV6 - 7095-CA:

  (1) the operating system is Windows 7 Home Premium (64 bit), the provided original with my 7095CA Pavilion, more updates HP until 2013, and all Windows updates until July 2015.

  (2) now I can't access the operating system and I have no interface UEFI. I can see that I press F2 at startup, just a test simple disk in BIOS f.0Une (the test shows that the disc is OK)

  (3) return in 2013 it took a drive failure. I did replace the disk and reinstall original Win7, all updates, including the HPS, win7 updates and all my personal software.

  (4) at this time, I bought a spare hard drive and did a complete copy of the disc using Partition Wizard bootable cd. The second disc has been tested and worked perfectly, with all of my personal software on this subject.

  So I have 2 HDs identical with the same system on both drives, fully working and tested.

  (5) a few days ago I came across the HP website and made a few updates, including the BIOS f.0Une (the last BIOS update, was of course).

  (6) after BIOS update ran, I received the message "no boot device - insert boot disk and press any key".

  (7) I couldn't solve the problem, so I did remove the hard drive and install my backup drive, which lay in a dry place without danger from 2013.

  (8) I turned on the computer and got the same message "No boot device - insert boot disk and press any key", and I couldn't find any way to solve this problem.

  Now I'm doing a new installation on a third HD everything works very well, so far, in the new facility and I will never buy HP again.

• Try to install Windows 7 via USB, El Capitan, Macbook Pro 2011 but get this error "No. BOOTABLE DEVICE - INSERT BOOT DISK AND press ANY KEY ' when bootcamp restart my macbook to begin the installation. Any ideas?

  I am trying to install Windows 7 via USB, (El Capitan, Macbook Pro - early 2011), but this mistake "No. BOOTABLE DEVICE - INSERT BOOT DISK AND press ANY KEY ' when bootcamp restart my macbook to begin the installation. Any ideas?

  You cannot use a USB on Mac 2011 Installer. Please burn the ISO on a physical DVD Windows (a DVD - R Carbon SL on the rate of burning slower is better) and use it to install Windows. The file Info.plist changes only allowing the creation of USB, but does not fully support a USB Installation.

• Windows 7 when I turn the laptop it says check cable connection pxe - mof: outgoing intel pxe rom no boot device insert boot disk and press any key

  Windows 7 when I turn the laptop it says check cable connection pxe - mof: outgoing intel pxe rom no boot device insert boot disk and press any key

  Hello

   

  1. What is the brand and model of the laptop?

  2 have you made any changes to the computer before the show?

   

  Method 1:  Change the boot order in the BIOS settings:

  See the following steps:

  Important: BIOS change / semiconductor (CMOS) to complementary metal oxide settings can cause serious problems that may prevent your computer from starting properly. Microsoft cannot guarantee that problems resulting from the configuration of the BIOS/CMOS settings can be solved. Changes to settings are at your own risk.

  (a) start on typing Dungeon either F1, F2, F10, Esc, or DEL to enter the BIOS Setup.

  Warning: some manufacturers use F10 for recovery of the system.

  (b) glance to "Drive Configuration", "Boot order" or similar

  (c) check the second drive the first boot device CD/DVD and hard drive.

  (d) to save the settings and exit.

   

  Method 2:

  Step 1: Trying to boot into safe mode and see if that helps.

  Start your computer in safe mode:

  http://Windows.Microsoft.com/en-us/Windows7/start-your-computer-in-safe-mode

  If step 1 work, try step 2

  Step 2:  A clean boot to check if startup item or services to third-party application is causing this issue.

  How to troubleshoot a problem by performing a clean boot in Windows Vista or Windows 7:

  http://support.Microsoft.com/kb/929135

  Note: when you're done to diagnose, follow step 7 in the article to start on normal startup.

• How to fix error of bootcamp: no boot device - insert boot disk and press any key

  When I try to install windows using bootcamp No. bootable device - insert boot disk and press any key any that appears at the start of the installation of windows 10. any solution please.

  Thank you

  What is the year/model of your Mac?

• Satellite L300D-222: "insert the boot disk and press any key".

  Hello

  My laptop froze this morning and so I stopped it when restarting it however, I received the message "No boot device - insert boot disk and press any key", what it means?

  I didn't not get discs with the laptop, or have I made the recovery discs. The instruction manual says to press f8 when I restart and go to "menu of advanced start", but it doesn't matter. Where should I go from here, is there a program I can download that would have this disc? All my work on the computer will be lost?

  Thanks in advance for any help!

  Hello

  He looks at the HARD drive died and so the laptop can not boot from the HARD drive but request disk bootable.
  But to be sure, you need to access the BIOS (press F2) and check if the HARD drive is recognized in the BIOS.
  If it s not recognized, then you need a new HARD drive.

  The recovery disc can be ordered here:
  https://backupmedia.Toshiba.EU/landing.aspx

  Good bye

• I screwed up trying to install windows on my computer 10 and I XE off installer and now its says "no boot device - insert boot disk and press any key".

  I was just trying to download 10 on my computer windows using boot camp assistant. I answered the questions for windows when you need to respond as what kind of language you use and then I messed up on one of the questions. I didn't know how to go back so I just pressed the red x. When I did that he must get off my computer and when it's done I got a black screen and then it says "No boot device - insert boot disk and press any key" I don't know what he meant by no bootable disk and I was hoping that you guys can help me fix.

  If stop you your Mac and your power it back up and hold down the Alt/Option key, you see a Windows selection? If so try to select and see if the installation will continue.

• No boot device - insert boot disk and press any key

  Hello

  I was with boot camp to install 10 Windows from a usb key. The first problem I encountered was an error message stating that Windows supports software could not be downloaded on my flash drive. I read that the necessary drivers could be installed later so I unchecked the box. The part of the installation, then training camp as it should (create a partition etc.)

  However, when the Mac went to restart and (probably) to start the program installation of Windows, the error message "No boot device - insert boot disk and press any key" displayed. My problem is the wireless keyboard does not respond and the light on this issue seems to suggest that it is not connected. My guess is that the drivers needed, such as Bluetooth are not there.

  I'd be happy enough to restart OS x and forget all about Windows, but I can't see how to get around this problem?

  A wired keyboard could work?

  any help is appreciated!

  Thanks in advance

  Max.

  A wired keyboard and mouse will work. If you try to install Windows and tried to download the Windows software on a wireless network, try a wired connection. to rebuild your USB Installer.

• Is "PXE - MOF: PXE ROM. exit" then below I don't get, "No Bootable Device - Insert Boot Disk and press any key any" why?

  I bought the lifetime windows, defender security system, I also downloaded the windows repair and ran it, I even cleaned my c drive and defragmented, but I always get the same black screen. This is what it looks like.

  PXE - MOF: Exit PXE ROM.

  No boot device - insert boot disk and press any key

  /} In this area here, I slash turns clockwise

  Does anyone know how planned it and most importantly, how to prevent?

  Try to change your startup settings for...

  1 CD-ROM
  2 USB
  3. HARD DRIVE
  4. (if available) floppy drive
  5 LAN.
  You can change it by pressing the button shown next to "Boot Order"

• Err1err3 Boot failure Insert system disk and press enter

  OK lets see if you can crack this for me, it started a week ago for me. If I leave my computer on as usual, he would go on the eve, duh. BUT now it would not start up instead of this I have a black screen and reboot I go to the blue HP screen with four options. Well I have tried for some time and managed to get Vista back up...

  Well, after that it started to get really slow and started freezing up during my loadup office. Then, after many hours of scanning and research and reading aid, after a virus scan and even a system restore I couldn't understand the problem and I did what for me was the unthinkable...

  A COMPLETE FACTORY RESTORE... I wiped my computer with the possibility of returning to factory install settings. And for a while, that was good, that he has worked again... TIL yesterday I let go to the screen saver and then sleep mode while I was away, and what to do, I see but once more

  ERR1ERR3 Boot failure Insert system disk and press enter

  so clues as to why this is happening.

  PS right now YES I download the bittorrent to vista repair which had been suggested in another thread pray that it will work, but until it's done, I wanted to share this and ask for anyone who might have an idea of what caused it.

  Hello

  Run the diagnostics and the other utilities that I posted.

  ---------------------------------------------------------

  Starting from your startup disk COMMAND prompt, run these (you can run them in windows, but can be
  more efficient prompt startup disk so I will list two meanings).

  A boot disk command prompt

  Chkdsk /f /r

  RESET

  sfc/scannow

  RESET

  ---------------------------------------------------------

  Inside Windows - regular or Safe Mode

  Run checkdisk - schedule it to run at the next startup, then apply OK then restart your way.

  How to run the check disk at startup in Vista
  http://www.Vistax64.com/tutorials/67612-check-disk-Chkdsk.html

  Start - type in the search box - find command top - RIGHT CLICK – RUN AS ADMIN

  sfc/scannow

  How to analyze the log file entries that the Microsoft Windows Resource Checker (SFC.exe) program
  generates in Windows Vista cbs.log
  http://support.Microsoft.com/kb/928228

  --------------------------------------------------------

  Back UP your data NOW!

  Good luck.

  Rob - bicycle - Mark Twain said it is good.

• Satellite 210ct does not start - insert system disk and press a key

  I have a very old laptop and want to move down. It is a 210ct Satellite. When I start upward, he goes and initializes memory and then after about five minutes, to be on that screen it said to insert system disk and press a key...

  It is not the disk hard as I tried it in another laptop and work very well. And then just sitting there.

  I really want to make it work again!

  Thank you

  Hello

  For me the description sounds like the laptop can not find an OS on the HARD disk bootable.
  The laptop trying to boot from the HARD drive and Windows has not been installed on the HARD disk or portable computer booting from the drive, but the environment is not bootable.

  Have you tried to boot from the recovery delivered CD or have you tried to reinstall the operating system?

• no boot found device, insert the boot disk and press any key

  Hello, recently tried to install Windows 10 through the Assistant Boot Camp, with the help of a DVD I bought windows. But I get an error saying "no devices found Boot insert boot disk and press a key" I tried to read and do all the patches, all offer and yet no results. Any suggestions or corrections us would be great!

  MacBook Pro mid 2012

  -i7

  Evo - Samsung 500GB SSD

  -Ram 16

  -Latest version of Mac OS x

  -L' use of 64 GB PNY flash drive

  Your Mac 2012 supported creating a USB Installer to help BC Assistant. Do not use a DVD, a USB Flash drive. Your USB drive must be a USB2 flash drive, if you choose the USB mode and you will need a Windows ISO.

  See also create an ISO image for Windows - Apple Support installation media Boot Camp .

• Boot failure insert system disk and press enter

  The computer I have was given to me. It has been completely removed with a program called "wipeout." I loaded my OS on it and everything seemed fine at first, but each time the computer restarts I get error boot disk failure insert system disk and press return.  What can I do?

  Initially to verify that the drive is identified in the bios (as soon as you on Btn led pwr hit several times)

  If it is not identified 1) the reader has not 2) an internal connection has departed