Gamepad not working do not under Vista
My Windows Vista loaded and runs MS Combat Flight Simulator V1 OK using the keyboard, in 'settings' program, he recognizes the joystick for calibration but joystick doesn't work just not in the game itself. I tried this fix below - but no luck. Any other ideas please?
To do:
1. open Windows Explorer.
2. Locate the executable file of the application.
3. right click on the executable, and then click the properties option.
4. Select the Compatibility tab.
5. Select run this program in Compatibility Mode option.
6. in the drop-down list, choose the operating system that you ran before upgrading to Vista.
7. If necessary, select run the program as administrator.
8. click on OK.
Hello
a. click the Start button.
b. click Control Panel, open game controllers.
c. click on your game controller, and then click Properties.
d. on the Test tab, test the game controller to verify functionality.
http://support.Microsoft.com/kb/831361
(Valid also for all Microsoft games)
Tags: Windows
Similar Questions
-
Tried to install Lightroom 6 on my Win 7 PC. He gave me the error code 15. I ran the CCleaner which has been proposed. Then tried to install. Now, it seems that he thinks that I'm running Vista on my computer because it says that Vista is not supported. I'm not under Vista, I have Win 7. What should I do now?
Hi mmcmm,
See this thread: try to install lightroom 6 on windows 7 get interface requirement not met windows vista not supported
Kind regards
Claes
-
Hebrew language works is not under Vista.
Original title: deleted language of vista
I have windows vista on a computer dell laptop. I had an additional language on my computer (Hebrew) all of a sudden the Hebrew did not work.
I tried to remove and re - install via the Control Panel, even through the toolbar, there is no language bar option.I tried to use ctrl + shift to switch between English and Hebrew, but it did not work (even if the Control Panel, said that the Hebrew is installed).What should I do?Thanks in advanceHadasHi Hadas,
Follow these steps and check if the problem persists.
Step 1:
I recommend you follow the steps in this link that talks about a similar problem.
http://answers.Microsoft.com/en-us/Windows/Forum/windows_vista-performance/cannot-change-to-Hebrew-language-keyboard-and/108c5c1f-ad38-448D-95FC-3220d02a4139Step 2:
Test the issue in a clean boot State.
Note: Follow step 7 to your computer as usual.
-
Dell Inspiron Fingertapps/Touchzone does not work very well under Vista
Fingertapps /Touchzone on my new Insipiron Dell ceased to function fully. I tried to download the latest version of Dell, but this has not fixed this problem.
The Fingertapps in on my new Insipiron Dell Touchzone ceased to function fully. I tried to download the latest version of Dell, but this has not fixed this problem.
You must contact the Support Technology Guide for assistance with these products at:http://support.dell.com/support/index.aspx?c=us&l=en&s=dhs. As this is a new Dell computer, it will still be under warranty and they will be more than happy to help you. We know nothing about the function of these programs or how to fix therm (or at least in my case, even what they're doing and I have a Dell).
I'm sure that they that they can help you get this installed and working properly.
I hope this helps.
Good luck!
Lorien - MCSA/MCSE/network + / has + - if this post solves your problem, please click the 'Mark as answer' or 'Useful' button at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.
-
Internet wireless on the laptop works do not under Vista
Hi guys. My laptop cannot connect to wireless internet. I tried to use ConfigFree Diagnostic tests already installed on my computer, reset the router, and even taking on the router for 30 seconds and put it to. On my laptop wireless switch is turned on, too. Is the only way I can connect to the internet via an ethernet cable and I started to disconnect from the internet wireless yesterday after I restarted my laptop. I know that the modem is not the problem because my brother's laptop can connect to the net to wireless. Thank you in advance.
Hello
Update the driver WiFi, use the wired (NIC) to download the driver or do it on another
system and your transfer on removable media such as CD, DVD or a USB key.Control Panel - device - network - WiFi note the brand manager and full
model information - double click - writing tab Drivers version - then power management tab uncheck "allow the computer to turn off this device...". »Then on the tab driver, click Update driver (this can do nothing as MS is far behind
drivers of certification) - then right click on the device - UNINSTALL - REBOOT - this will
update the driver stack.Go to system Maker and search for the WiFi Driver updated - download - SAVE - go to
where you put it - make a right click on it - RUN AS ADMIN - REBOOTThen go to the site of the manufacturer of the device and get even more recent (Realtek, Intel, or one that makes
the device) and try the install again.Look at the sites of the manufacturer for drivers - and the manufacturer of the device manually.
http://pcsupport.about.com/od/driverssupport/HT/driverdlmfgr.htmHow to install a device driver in Vista Device Manager
http://www.Vistax64.com/tutorials/193584-Device-Manager-install-driver.html====================================================================
Check with Toshiba support, their drivers online (update or reinstall) and their forums.
Toshiba - Forums
http://laptopforums.Toshiba.com/Toshiba - Contacts
http://www.CSD.Toshiba.com/cgi-bin/TAIS/support/JSP/navShell.jsp?CF=su_contactToshiba - drivers - access your model
http://www.CSD.Toshiba.com/cgi-bin/TAIS/support/JSP/home.jsp?NAV=downloadToshiba - Support
http://www.CSD.Toshiba.com/cgi-bin/TAIS/support/JSP/home.jspI hope this helps.
-
CD player not working not not under Vista
* original title - cd drivers not working *.
Remember - this is a public forum so never post private information such as numbers of mail or telephone!
Ideas:
- You have problems with programs
- Error messages
- Recent changes to your computer
- What you have already tried to solve the problem
http://support.Microsoft.com/kb/982116/en-AU
Your CD or DVD drive is missing or is not recognized by Windows or other programs
http://support.Microsoft.com/GP/cd_dvd_drive_problems
See if the information above solves the problem.
See you soon.
Mick Murphy - Microsoft partner
-
Tecra M9 and M10 wheel Volume does not not under Vista
Hello
I hope that someone can help me, I'm Vista using Microsoft Deployment Workbench deployment for Tecra M9 and M10 material and the volume knob will not work. I added the drivers of Toshiba in Deployment Workbench, while they are presented the machines via Plug n Play, volume button do not work. I also deleted the drivers of Deployment Workbench and installed the drivers manually on the machines, this installs fine, but volume knob will not work. I have two development servers, Win Server 2003 and Win Server 2008, the two do not run successfully the pilot slots.
If I deploy a standard Win Vista Enterrprise 32 bit OS of DVD hardware, with any driver when it is installed, the volume wheel works. I can then manually install the audio driver and the volume button still works. But if I deploy the same exact DVD based OS of Deployment Workbench, the volume knob does not work?
Any help would be greatly appreciated, as this is doing my head and holding up the deployment of the new image.
Thank you
PaulMaybe you are trying to install the driver Audio of M9 M10 or vice versa?
You install the driver Chipset Intel and value-added package first? (this is important)
-
Administrator password does not not under Vista
I have a new desktop computer with Vista and have worked on getting it set up. I've set up user accounts, but my password of the administrator account does not work. I tried all the options and checked the capslock and even tried a few misspellings, even if I don't have a problem the first 4 or 5 times I had used it. is there anyway to reset it without having to reinstall Windows since I don't have a password reset disk?
You did not account for additional user with administrative privileges? If this isn't the case, you will need to use a program like NTpasswd empty password for your account, so you can connect.
Download the bootable CD .iso image file, burning with burning software, third party (as an image, not in the form of data), starting with the media that you have created. You need to maybe change the boot order in the BIOS or obtain a menu of boot command temporary with the pressure of a special key. NTpasswd will run. Follow the instructions carefully.
http://home.eunet.no/~pnordahl/ntpasswd/
Once you're back in the system, here are my suggestions for how to configure user accounts in Vista:
You absolutely don't want to have only one user account. In particular, you do not want one account user with administrative privileges on Vista because the administrator account integrated (normally only used in emergencies) is disabled by default. If you use as an administrator for your daily work, and this account is corrupt, things will be difficult. It is not impossible to activate the built-in administrator to rescue things, but it will take third-party tools and work outside the operating system.
The user account that is for your daily work must be a Standard user, with the extra administrative user (call it something like 'CompAdmin' or 'Tech' or similar) only it for elevation purposes. After you have created "CompAdmin", connect to it and change your normal user account Standard. Then log on to your regular account.
MS - MVP - Elephant Boy computers - don't panic! -
backup service Windows are not not under Vista Business services
The backup service is not listed in the list of services under administrative tools. What is the name I have to search on Windows Vista Business (Ultimate used on this machine before but not more)?
Hello
It's an instance of installation of vista operating system that you have posted in
This is a microsoft specific forum for backup issues
http://social.technet.Microsoft.com/forums/en-us/WindowsBackup/threads
-
Graphics driver does not not under Vista
first disable my graphics driver does not work. & I don't know how to fix or install. What should I do? that you install? I am computer jargon challenged. so if you could speak in terms I can understand & explain to me if I do not receive it. I'd be happy. TY Heather
* original title - need a lot of help please.*
Hello
Troubleshooting explains how to upgrade the video driver (graphics card) and others as needed.
This utility, it is easy see which versions are loaded:
-Free - DriverView utility displays the list of all device drivers currently loaded on your system. For
each driver in the list, additional useful information is displayed: load address of the driver, description,.
version, product name, company that created the driver and more.
http://www.NirSoft.NET/utils/DriverView.htmlFor drivers, visit manufacturer of emergency system and of the manufacturer of the device that are the most common.
Control Panel - Device Manager - graphics card - note the brand and complete model
your video card - double - tab of the driver - write version information. Now, click on set to update driver
(this can do nothing as MS is far behind the certification of drivers) - then do a right click - Uninstall - REBOOT
This will refresh the driver stack.Repeat this for network - card (NIC), Wifi network, sound, mouse, and keyboard if 3rd party with
their own software and drivers and all other main drivers that you have.Now in system manufacturer (Dell, HP, Toshiba as examples) site (in a restaurant), then the manufacturer of the device
site (Realtek, Intel, Nvidia, ATI, for example) and get their latest versions. (Look for the BIOS, Chipset and)
software updates on the site of the manufacturer of the system here.)Download - SAVE - go to where you put them - right click - RUN AS ADMIN - reset after each
installation.Always check in the Device Manager - tab drivers version you install actually shows up.
This is because some restore drivers before the most recent is installed (particularly that audio drivers) so
install a driver - reboot - check that it is installed and try again if necessary.Repeat to the manufacturers - BTW in the DO NOT RUN THEIR SCANNER device - check manually
by model.Look at the sites of the manufacturer for drivers - and the manufacturer of the device manually.
http://pcsupport.about.com/od/driverssupport/HT/driverdlmfgr.htmHow to install a device driver in Vista Device Manager
http://www.Vistax64.com/tutorials/193584-Device-Manager-install-driver.htmlIf you update the drivers manually, then it's a good idea to disable the facilities of driver in the Windows updates,
This leaves ONE of Windows updates, but it will not install the drivers who are generally older and cause
questions. If updates offers a new driver and then hide it (right click on it) and then go look for new ones
manually if you wish.How to disable automatic driver Installation in Windows Vista - drivers
http://www.AddictiveTips.com/Windows-Tips/how-to-disable-automatic-driver-installation-in-Windows-Vista/
http://TechNet.Microsoft.com/en-us/library/cc730606 (WS.10) .aspxHope these helps.
-
Copy / paste does not not under Vista
I use the piece of garbage called Vista Home edition.
Microsoft can't even their own system to work. They may not even recognize their OWN identification numbers when I go to get help.
What kind of society.
Copy and paste it on Vista Home edition does not work and has not worked for a long time.
Any ideas how to operate?
If your cam to pre-installed operating system OEM may be responsible for your assistance and not Microsoft support?
What ID product fails to be recognized? There is a time limit on how long Online Support is available to you the spirit, to get the thing to work seems to involve jumping through hoops in my opinion. Some things you have to do is to add sites to the IE Trusted Sites, allow ActiveX to run and possibly start IE by right clicking and selecting the option 'run as administrator '. Even in this case it can be successful, I am yet to find someone who contacted Microsoft through their online Support successfully, I suppose it should work, otherwise the person at the end of the right Microsoft got a real cushy job.
Microsoft Technical Support phone numbers
http://support.Microsoft.com/kb/319726/en-usMicrosoft U.S. Office locations
http://www.Microsoft.com/about/companyinformation/usaoffices/en/us/default.aspxOnline Assisted Support options
http://support.Microsoft.com/select/default.aspx?target=assistanceMicrosoft contact information - Is supported by the phone number, Email
http://support.Microsoft.com/GP/phonelist#phoneUpgrade to Windows 7, Office Small Business has lost
http://social.answers.Microsoft.com/forums/en-us/w7programs/thread/75af1220-321b-48A2-990c-4297ed0647cdWhat's the problem with him copy / paste? Drag and drop work for you? Have you tested with another mouse? They work if you log Mode without failure or creates another user in Normal Mode?
Vista Advanced Boot Options (or 7)
http://Techblissonline.com/Vista-advanced-boot-options/How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7
http://support.Microsoft.com/default.aspx/KB/929135Take a look through some of the similar posts on toward the right in 'related topics '.
Help please! I can't use the copy & paste!
http://social.answers.Microsoft.com/forums/en-us/vistaprograms/thread/e04cc6b7-cb95-4e24-b69f-5857eb3fea01Not possible to paste pictures of MS Word for widows Mail?
http://www.Vistax64.com/Vista-mail/116614-not-possible-paste-pictures-MS-Word-widows-mail.htmlNo shortcuts keyboard Ctlr C then Ctrl V or Ctrl X then Ctrl V work?
-
Keyboard for Indian Format options does not not under Vista
Using the keyboard for special characters Options does not not according to Indian Format for Windows Vista.
I'm using windows vista but cannot use the arobas option above digital key2?
Hi Nadia Vallet,.
In addition, please see the following article with useful information about your question:
http://Windows.Microsoft.com/en-us/Windows-Vista/change-your-keyboard-layout
I hope this helps!
Debra
Microsoft Answers Support Engineer
Visit our Microsoft answers feedback Forum and let us know what you think -
How can I fix com surrogate does not not under Vista?
Whenever I try to open a video file, this is the error I get, can someone help how to solve this problem in simple terms please lol
Bunch of possible corrections here:
Fix for COM Surrogate has stopped working error in Vista
http://www.howtogeek.com/HOWTO/Windows-Vista/fix-for-COM-surrogate-has-stopped-working-error-in-Vista/ -
I'm trying to us an interactive educational cd on my laptop, using a Vista operating system. When I insert the cd, autorun will appear and the disc spins, but then nothing happens. I tried the cd of windows 7 and it works very well, what can I do to make it wok in vista?
Hello
Try the microsoft 'fix - it' for your problem below
http://support.Microsoft.com/mats/cd_dvd_drive_problems/en-us
and read this information too
-
Canon MP Navigator stopped working with scanner. Worked under Vista, not Win 7.
Scanner Canon Lide 200 worked very well under Vista 64. I've updated on Win 7 64 and the software interface has stopped working - "MP Navigator EX has stopped working". That's a BEX error module fault MSONSEXT. DLL_unloaded. I uninstalled, downloaded the newest and reinstalled, same problem. Canon had me create a new profile, the program works in this profile. Canon has written it's rights or licensing of the OS.
The scanner works with other software. MP Navigator is a resident program for making copies or copy and email, etc..
Here are the details of the windows error
Problem event name: BEX
Application name: mpnex20.exe
Application version: 2.0.3.0
Application timestamp: 488d25b8
Fault Module name: MSONSEXT. DLL_unloaded
Fault Module Version: 0.0.0.0
Timestamp of Module error: 43306199
Exception offset: 49143a3b
Exception code: c0000005
Exception data: 00000008
OS version: 6.1.7600.2.0.0.768.3
Locale ID: 1033
Additional information 1: 0f31
More information 2: 0f3137665bbf0bb676c8a16f3fa76e52
Additional information 3: fff8
Additional information 4: fff84cbc2f915b8472e90c61e476efefI had the same problem with Win 7 64. I talked to Support Canon technique and after an hour in which we tested several things, I was told the problem was with Windows and I need to contact Microsoft. I tried to create a new profile that has fixed the problem for about a week, then he came back again! The question may be associated with Windows Update, but I'm not sure. On this last go I created a new profile and then copied to the folders and files from the corrupted profile one at a time to see when the problem would be to start over. After carefully copy of files, save, test Mp Navigator, and if necessary to restore the last good configuration I discovered that the following file was the cause of the problem:
C:\Users\
\App Data\Roaming\Microsoft\Windows\Network Shortcuts\My Web Sites on MSN Note: This file was not present in my new profile. In addition, the icon has the shortcut on that marker, but explore announces that it is a folder. There is no file extension.
I then copied ALL the other bad profile data to the new and MP Navigator still worked! I then deleted the file in question from the wrong profile and MP Navigator started working there too!
I then reconfigured all my software and IE etc for the first time by looking at the network shortcuts folder. The file in question has not yet reappeared. I made a shortcut to this place, I can keep an eye on it to see when it appears again.
I hope someone at CANON or Microsoft will fix this issue of profile "corrupt."
Sincerely,
David Witteried
Maybe you are looking for
-
Maybe that's two questions. Both pooped upward with a recent update. I do not have yahoo extensions or add-ons installed. (a) I type a URL in the navigation bar (NOT the search box), and all of these 'useful' pop-up suggestions. Do stop. (b) I type w
-
Sony Ericsson XPERIA X 1 lighting problem
One of the outdoor lighting LED four games seems to have failed. I used a lot of Sony Ericsson phones, and it's the first ever have a problem (probably because it was the one manufactured by HTC). No matter what other X 1 on agoraquest of owners who
-
Satellite 2710XDVD crashes at the stop down
My 2710XDVD Satellite crashes to farm, the "Closing Windows" screen. I am running Windows 98 SE, bios 7.60. The problem started after installing a Sitecom WL-011v2 card.When I remove the card (in fact, turn it off using the control panel pc card Mana
-
R400 - bought ddr3 1066 mhz memory but works in 399 mhz?
Hi, I own a Thinkpad R400 and recently I bought memory for her. Memory is 2 x Samsung PC3-8500 1066 mhz DDR3 1 GB and now that I'm checking CPU - Z for mem clock it says its 399 mhz running? Latest version of Memtest 86 + reports also 399 mhz DDR800.
-
I need to order a new screen laptop to replace a damaged. Here is my product information:HP Pavilion 17 Notebook PC product nameSerial number: (personal information by moderator)Product number: G4X63UA #ABAOperating system: Windows 64-bit 8.1 Thanks