Gamepad Xbox 360 plugged into USB with "Play and Charge Kit" does not work

Similar Questions

• Client proxy (on USB) with DHCP address assigned IP does not work with FRDM-K64F

  Hello

  After reading the questions on this forum with a static IP address on the Freescale FRDM-K64F set, I went for a DHCP address, but I can't get the proxy client to work via USB with DHCP connection either.

  My console tells me the following:

  Time of RTC: sea-2014-01-01 00:07:27

  Network initialized

  IP address: 10.143.xxx.yyy (xxx and yyy is real numbers, just change them to the forum of letters)

  Subnet mask: 255.255.252.0

  Gateway: 10.143.xxx.yyy

  MAC address: 00: 0C: 00:06:70:00

  And when I try o connect with the following command:

  java-jar proxy.jar - socket 10.143.xxx.yyy

  I get the result without CLI interface and next:

  Trying to open the socket with device connection: 10.143.xxx.yyy:2201

  [Connected to the Jack: Socket[addr=/10.143.xxx.yyy,port=2201,localport=49605]

  Open channel 8 with hash 0x130399b3

  Channel 8 CLOSED-> OPEN

  notifyResponse AVAILABLE_RESPONSE on channel 8

  AVAILABLE OPEN-> 8 channel

  Open channel 9 with hash 0 x 0

  Channel 8 AVAILABLE-> REQUEST_SENT

  notifyResponse ACK_RESPONSE on channel 8

  Channel 8 REQUEST_SENT-> ACKNOWLEDGED

  Channel 8 has RECOGNIZED-> DATA_SENT

  notifyResponse AVAILABLE_RESPONSE on channel 8

  Channel 8 DATA_SENT-> AVAILABLE

  Channel 8 AVAILABLE-> REQUEST_SENT

  notifyResponse ACK_RESPONSE on channel 8

  Channel 8 REQUEST_SENT-> ACKNOWLEDGED

  Channel 8 has RECOGNIZED-> DATA_SENT

  notifyResponse AVAILABLE_RESPONSE on channel 8

  Channel 8 DATA_SENT-> AVAILABLE

  Channel 8 AVAILABLE-> REQUEST_SENT

  notifyResponse ACK_RESPONSE on channel 8

  Channel 8 REQUEST_SENT-> ACKNOWLEDGED

  Channel 8 has RECOGNIZED-> DATA_SENT

  notifyResponse AVAILABLE_RESPONSE on channel 8

  Channel 8 DATA_SENT-> AVAILABLE

  Channel 8 AVAILABLE-> REQUEST_SENT

  notifyResponse ACK_RESPONSE on channel 8

  Channel 8 REQUEST_SENT-> ACKNOWLEDGED

  Channel 8 has RECOGNIZED-> DATA_SENT

  notifyResponse AVAILABLE_RESPONSE on channel 8

  Channel 8 DATA_SENT-> AVAILABLE

  Channel 8 AVAILABLE-> REQUEST_SENT

  notifyResponse ACK_RESPONSE on channel 8

  Channel 8 REQUEST_SENT-> ACKNOWLEDGED

  Channel 8 has RECOGNIZED-> DATA_SENT

  notifyResponse AVAILABLE_RESPONSE on channel 8

  Channel 8 DATA_SENT-> AVAILABLE

  Channel 8 AVAILABLE-> REQUEST_SENT

  notifyResponse ACK_RESPONSE on channel 8

  Channel 8 REQUEST_SENT-> ACKNOWLEDGED

  Channel 8 has RECOGNIZED-> DATA_SENT

  notifyResponse AVAILABLE_RESPONSE on channel 8

  Channel 8 DATA_SENT-> AVAILABLE

  Channel 8 AVAILABLE-> REQUEST_SENT

  notifyResponse ACK_RESPONSE on channel 8

  Channel 8 REQUEST_SENT-> ACKNOWLEDGED

  Channel 8 has RECOGNIZED-> DATA_SENT

  notifyResponse AVAILABLE_RESPONSE on channel 8

  Channel 8 DATA_SENT-> AVAILABLE

  Channel 8 AVAILABLE-> REQUEST_SENT

  notifyResponse ACK_RESPONSE on channel 8

  Channel 8 REQUEST_SENT-> ACKNOWLEDGED

  Channel 8 has RECOGNIZED-> DATA_SENT

  notifyResponse AVAILABLE_RESPONSE on channel 8

  Channel 8 DATA_SENT-> AVAILABLE

  I don't know if this topic but my version of java is:

  Java version "1.8.0_31".

  Java (TM) SE Runtime Environment (build 1.8.0_31 - b13)

  Java for 64-bit Server VM (build 25.31 - b07, mixed mode)

  Any ideas or am I missing something completely?

  Thank you

  Andy

  Hi Andy,.

  your log shows that the proxy is connected with the Board of Directors.  To start the CLI, you can either provide '-j' have ' touch to the proxy command line or PuTTY simply connect to localhost (raw Protocol, port 65002)

  / Sergey

• I bought a Xbox 360 for Windows gamepad, as well as a Play and Charge kit. If I want the charge with this kit controller, can I use a USB/power Apple to the charge controller plug?

  I bought a Xbox 360 for Windows gamepad, as well as a Play and Charge kit. If I want the charge with this kit controller, can I use a USB/power Apple to the charge controller plug?

  Hi Arvin,

  The question you posted would be better suited in the Xbox Forums. I would recommend posting your query in the Xbox Forums.

   

  Welcome to the Xbox support

  http://support.Xbox.com/en-us/

  Hope this information helps.

• Here's a strange. I have a HTML page with this time a wmv video. It works perfectly from a USB stick or SD card, but does not work when they are copied to the hard drive

  I have an HTML page created with web expression 4. It contains only a wmv video. It works perfectly when it is called from a USB stick or SD card, but does not work when they are copied to the hard drive. The results are the same with IE and Firefox. It don't make no difference if I use Media Player V9 or V11. He has no control on the page Media Player. Video and html files are in the same directory. Here is the code snippet:

  LIFT, DRAG, THRUST and GRAVITY

  
  

  
  
  

  If I run it on a machine with Win 7 there is no problem.

  Richard Grosser

  Hi Richard c. Grosser,.

  Your question is more complex than what is generally answered in the Microsoft Answers forums. It is better suited for the IT Pro TechNet public. Please post your question in the Microsoft Expression forums.

  http://social.expression.Microsoft.com/forums/en-us/categories

• Satego P100-10F: Windows XP Lan, usb slots and the sound does not work

  Hello

  I have problems with windows vista, so I checked the forum to get information on the windows xp installation.

  I downloaded the drivers windows xp since the P100 Satellite (pspa6e), my only problem is that the LAN, usb slots and my sound does not work.

  I hope someone has a good idea for drivers or to install another driver I have sound and LAN on windows xp.

  Ty and Greetz

  See European driver of Toshiba.
  Here, you can try to install several drivers of different portable Satellite P100.
  Try all series.
  Fact is that some units of the Satellite P100 and Satego P100 series were delivered with the same features.
  Therefore, it should be possible to use the unique drivers of these series.
  Check all.

• Satellite L305D-S5895 - keys to functions and the wifi does not work with Win XP

  Hello

  first sorry for my English

  I bought a Toshiba Satellite l305d s5895, with Windows XP, I need a software, but the function keys does not work.
  So I need a driver, but I can't, and wireless internet does not work.

  > Where could it find special XP BIOS?
  In my opinion, there is problem because most threads here are on the European laptop models. then come to question United States. Toshiba Europe and Toshiba U.S. do not work together and each of them is responsible for own models and provide support for specific country notebooks models.

  For most models, so here in Europe Toshiba has offered two BIOS. We were already on the delivered Vista laptops. The Toshiba page download available BIOS for Windows XP Home edition. in most cases, it was version 5. XX and this BIOS was designed to support public services and specific tools of Toshiba. For example, all the FN key features was only available with this BIOS WXP.

  So if any of you have laptop model US they would see how the solution with Toshiba U.S. or US forum under http://community.compuserve.com/n/pfx/forum.aspx?webtag=ws-laptop&redirCnt=1

  Bye and good luck!

• Microsoft headset - I installed Microsoft LifeChat 1.4 but when I play music the headset does not work

  I installed my microsoft lifechat 1.4 I can receive my microphone, but when I play my music, it does not work

  Hello

  ·         Never work earlier?

  Check to see if this article helps you.

  Activate the sounds in the LifeChat headset

• USB ports, CD/DVD player, and Mike just does not work

  So I'm pretty sure that these things are happening at the same time, although there are risks my trying to troubleshoot the USB ports have contributed to the failure of the microphone (internal and will not capture sound) and cd/dvd drive (not open). Perhaps? It is true that I know little about these kinds of things, but I'm much less following the indications which is what I did to try to tackle the problem of USB port, which was the first I noticed. I followed all the advice I could find online for troubleshooting when all usb ports do not respond. I used Device Manager to disable in its regular and safe mode. I also uninstalled them all in both modes (even if they reinstall until I'm able to restart). I unplugged and wait 5, 10, 15 min etc. There was a difficulty mentioned about watching the. Mine and INF files do not contain the mentioned error. I'm tempted to all my files backup and restore the computer to factory settings, especially now that the CD/DVD player and the micro does not work. This would solve the problem? If these things are related? Could even restore settings because I can't have in the cd/dvd drive? It's a dell inspiron 1721, and it crushed while you restart for almost a whole day just all the time I've began to notice all these malfunctions. I really appreciate any guidance!

  Good so I solved all of these problems. I don't know what did the trick, but when I went back in the BIOS to re - activate the ports they have worked!

• Microsoft Flight Simulator 2004 installation with the 4th vista disc does not work. What should I do?

  Microsoft Flight Simulator 2004 installation with the 4th vista disc does not work.  What should I do?

  Hello

  You get no matter what error code or error message?

  There seems to be a problem with the file missing in the rear disc system. I suggest you to refer to the following Microsoft article and check if it helps.

  Flight Simulator 2004: known video issues: http://support.microsoft.com/kb/823628

  If the steps in the Microsoft article mentioned above do not help, then it would be best to ask your question in the Microsoft Game support forum.

  Microsoft Flight Simulator Games Forum: http://www.fsinsider.com/

  Or contact support for Microsoft Flight Simulator game: http://www.microsoft.com/Products/Games/FSInsider/tips/Pages/default.aspx

  Hope the information is useful.

• My Pc came with Photoshop elements 11 I did a factory rest on my pc and now Photoshop does not work. The error code is 213:19 I have not the disc to install it came with the pc already installed.

  My Pc came with Photoshop elements 11 I did a factory rest on my pc and now Photoshop does not work. The error code is 213:19 I have not the disc to install it came with the pc already installed.

  I hope this will help:

  Error 213:19 | Problem is the license for this product

• Webcam USB 2.0 on my laptop with windows vista error device does not work correctly

  Original title:

  I just plugged a usb2.0 webcam on my laptop with windows vista. It is loaded ok, but the device manager says that the device does not work correctly. Any ideas please.

  I just got a webcam via ebay and plugged into my laptop. I'm working on windows vista. He finds and load device software right away, no problem. But I can't work. go into my device manager it tells me that the device does not work correctly. Any ideas please.

  Hi Matthew,

  The first thing I would try is to connect the webcam to another computer to make sure that the webcam is not defective.

  Now, check out these links and return to the State of the question.

  When hardware installed in or attached to a computer doesn't work properly, it is often because of a driver problem.

  Here are a few common problems with drivers and the means to solve them.

  See the following link for more information:

  Tips for solving common driver problems

  Also check out the following link and run the fixit available.

  Hardware devices do not work or are not detected in Windows

  The fixit diagnose and solve problems with the equipment. (USB) Keyboard and mouse are not detected by the Manager of devices or when they do not work.

• MiFi will not work unless that plugged into the computer... Verizon no help at all it explains a vista problem... He used to work, but I think that an update did something to it and now it does not work...

  Remember - this is a public forum so never post private information such as numbers of mail or telephone!

  Ideas: hours on the phone with verizon... nothing is ready to throw the Verizon mifi and go to TMobile... forums looking for answers but not help there... seems a lot of people have this problem... someone at - it help him?

  • You have problems with programs
  • Error messages
  • Recent changes to your computer
  • What you have already tried to solve the problem

  A Beyschau of Annette

  Hello

  Quote: ' MiFi will not work unless plugged in to the computer.

  Where it has been plugged in before?

  If you are using to connect via Wireless, then it might be that your wireless connection has a problem.

  ----------------------------

  Wi - Fi in general.

  These steps and tell us where is the breaking point.

  Check the Device Manager for the wireless card valid entry.

  http://www.ezlan.NET/Win7/net_dm.jpg

  If there is no valid entry, remove any entry from fake and re - install the drivers for the wireless card.

  Check network connections to make sure that you have a network icon/entry wireless connection, and that the properties of the icon (right-click on the icon) are correctly configured with the TCP/IPv4 protocol in the properties of network connections.

  http://www.ezlan.NET/Win7/net_connection_tcp.jpg

  ------------------

  The wireless card drivers much also install utility wireless of the seller.

  Make sure that if there are teas from Wireless Utility of seller does not work with the native Windows wireless utility (Service WLAN).

  ----------------

  Make sure you firewall No. preventing / blocks wireless components to join the network.

  Some 3rd party software firewall continue to block the same aspects it traffic Local, they are turned Off (disabled). If possible set up the firewall correctly, otherwise totally uninstall and get rid of its remaining processes that permit the own local network traffic flow.

  If the 3rd party software is uninstalled, or disables, make sure Windows native firewall is active .

  party like Hello and NetMagic 3rd network managers can block local traffic too.

  ---------------------------

  Stack TCP/IP work should look like.

  Right-click on the wireless network connection card, select status, details and see if she got an IP address and the rest of the settings.

  http://www.ezlan.NET/Win7/status-NIC.jpg

  Description is the data of the card making.

  The physical address is MAC of the card number.

  The xx must be a number between 0 and 255 (all xx even number).

  YY should be between 0 and 255

  ZZ should be between 0 and 255 (zz all the same number.)

  The date of the lease must be valid at the present time.

  * Note 1. IP that starts with 169.xxx.xxx.xxx isn't valid functional IP.

  * Note 2. There could be an IPv6 entries too. However, they are not functional for Internet or LAN traffic. They are necessary for Win 7 homegroup special configuration.

  ---------------------------------------------------

  A message in the small window that says connected wireless doesn't means that you are really a valid functional connection.

  Above everything is OK, you must be able to connect to the router.

  Connection to the router means that you can enter the IP of the router base in an address bar in one go, being able to connect and configure the router menus see.

  If it doesn't connect to the router, journal newspaper from any computer that can connect to the router wirelessly with a wire, disable wireless security, make sure that the wireless SSID broadcast is enabled and try to connect with no. wireless security.

  Enable security wireless after you eat to make a functional connection.

  Jack-MVP Windows Networking. WWW.EZLAN.NET

• USB optical mouse is recognized but does not work.

  I use a computer portable 64-bit of windows 8 and I have tried to use all ports.

  The red light under the mouse appears upwards (the mouse is a mouse usb HP in the base address) but I'm not able to click or move.
  I read the previous posts about other people with this kind of problem and checked my device manager and uninstalled all my drivers and then re them installed for the mouse, but I noticed that when I uninstall the drivers mouse and plug it in again, it installs several things; under Human Interface drivers it installs the HID-compliant device and 3 USB input devices.
  It also installs "HID-compliant mouse" under "mice and other pointing devices".
  Every 10-20 seconds it will make noise that indicates it is be unplugged and plugged back in and all the drivers disappear and reappear.
  I tried to use another mouse that looks like this, and none of them work in my laptop. They both work in my PC and my laptop of brothers, they are both windows 7.
  Thank you

  Hello

  As you have tried 2 other mice in all ports of the computer and both does not work, but the same mouse works in any other computer shows that the problem is with the controllers USB (universal Serial Bus) of the laptop.

  I would ask you re-install Bus controllers and check if that helps.

  a: press the Windows key + R, and then click on Device Manager

  b. expand the Controllers of Bus USB section by clicking on the'+' sign.

  c. Uninstall each of the devices under the section USB Controller by right-clicking on each one, and then clicking Uninstall.

  d. close the Device Manager and restart your computer. Windows RE-automatically install the USB controllers in your computer, without you having to do anything further. Your computer is now running properly USB devices.

  Answer please if you have any questions.

• Plugged not charging - laptop does not work on battery

  I have a Lenovo laptop running Windows 7 less than a year.  But it does not work on battery now.  Battery level icon said: ' 87% available (plugged in, does not support).  Multiple, several times I tried to remove and re - insert the battery, restarting, uninstalling the 'Compatible Microsoft ACPI Control method battery' driver through the device, new material to re Analysis Manager - find the battery and re-install the driver, over and over again.  Nothing works for me--and if I unplug the AC adapter, the laptop just dies instantly.  Basically, it is as if the computer can see the battery, knows it is there and has the power, but don't give her a load or pull everything current.  What is the reference for this?  Anyone?  Help, please!  Thank you.

  Hello

  References to Vista also apply to Windows 7.

  Check with support from the manufacturer of their books online and the drivers and their forums system
  (as applicable) for known issues and possible solutions.

  Support from Lenovo and downloads
  http://www-307.IBM.com/PC/support/site.WSS/homeLenovo.do

  Lenovo forums
  http://forums.Lenovo.com/

  =================================================================

  Its 'possible' that sort of corruption is a problem.

  Follow these steps to remove corruption and missing/damaged file system repair or replacement.

  Run DiskCleanup - start - all programs - Accessories - System Tools - Disk Cleanup

  Start - type in the search box - find command top - RIGHT CLICK – RUN AS ADMIN

  sfc/scannow

  How to fix the system files of Windows 7 with the System File Checker
  http://www.SevenForums.com/tutorials/1538-SFC-SCANNOW-Command-System-File-Checker.html

  Then run checkdisk (chkdsk).

  How to run check disk in Windows 7
  http://www.SevenForums.com/tutorials/433-disk-check.html

  =================================================================

  Other information that might help:

  Control Panel control - plan change Options - power plans - power - advanced settings
  Parameters for the drainage and the use of parameters (this is how much to use and not how much or how)
  long to load).

  In fact, what causes a lot of wear on a battery empties it too low on several occasions. With today
  systems overload are not a problem.

  Here are some tips to help and troubleshoot battery issues.

  Old battery? Unplug the power to the computer - remove the battery and clean the contacts with a pencil
  eraser (do not use this, if your battery is fine slots - just clean up the edges of the knife which fit in)
  them and be careful). Batteries are old, or it could be a problem with the computer.
  Check with the support of the machine system, and many of them have on line forums.

  New Lithium-Ion type battery usually last longer if you do not unload then less than 30%
  However on a laptop that not extend their life a lot. Best is to use the a/c adapter
  When this is possible.

  I use the free version of BatteryBar to monitor my battery. Click on the green button on the
  Yellow box on the right side of the page to download the latest stable version.

  BatteryBar - free version available
  http://osirisdevelopment.com/BatteryBar/index.html

  Another good program

  Vista battery saver - free
  http://www.codeplex.com/vistabattery

  Problems with the lives of its use and the battery of power - Mr Fixit
  http://support.Microsoft.com/GP/windows_battery_power_settings

  You can also check with the manufacturer of system and forums that many use their own
  proprietary software to monitor the battery and they could be known problems with your battery.

  ============================================================

  Battery meter: frequently asked questions
  http://Windows.Microsoft.com/en-us/Windows7/battery-meter-frequently-asked-questions

  Battery saver
  http://Windows.Microsoft.com/en-us/Windows7/conserving-battery-power

  Solutions to common battery problems
  http://Windows.Microsoft.com/en-us/Windows7/solutions-to-common-battery-problems

  What is the precise the battery meter?
  http://Windows.Microsoft.com/en-us/Windows7/how-accurate-is-the-battery-meter

  ============================================================

  Try this - to make a Restore Point

  How to create a System Restore Point in Windows 7
  http://www.SevenForums.com/tutorials/697-system-restore-point-create.html

  How to do a system restore in Windows 7
  http://www.SevenForums.com/tutorials/700-system-restore.html

  Then Control Panel - Manager of devices - Batteries - Double click on each item - drivers - tab
  Update the drivers (which can do nothing) - then do a right click and UNINSTALL each - RESTART
  who will update the driver stacks.

  Problems with the lives of its use and the battery of power - Mr Fixit
  http://support.Microsoft.com/GP/windows_battery_power_settings

  I hope this helps.

  Rob Brown - MS MVP - Windows Desktop Experience: Bike - Mark Twain said it right.

• Intel (r) 82801G (ICH7 Family) USB Universal Host Controller - 27 8 does not work correctly

  On my Toshiba Netbook USB ports do not work. When I troubleshoot I get error: Intel (r) 82801G (ICH7 Family) USB Universal Host Controller - 27 8 does not properly detected - Windows has detected a problem with Intel (r) 82801 G don't anyone knows how to solve this problem?

  Hello

  I suggest that you install the latest drivers for the chipset from the manufacturers Web site.
  http://www.Toshiba.com/Tai/

  Alternatively, you can try to install the utility to update .inf for the chipset model of check and Intel website.

  Thank you, and in what concerns:
  Swati Keni-Microsoft Support