Games on an M70-144 and the curious graphics switch

Similar Questions

• When I change how a user connects power on and off a screen appears saying "client for Netware has disabled the Welcome screen and the fast user switching. To restore these features...

  Original title: how to uninstall client services for netware?

  When I change how a user connects power on and off a screen appears saying "client for Netware has disabled the Welcome screen and the fast user switching. To restore these features, you must uninstall client services for Netware... But it is impossible to find... Help?

  Hello LindsayJune,

  Click the Start button.
  Click on Control Panel. Select network connections
  Right click on 'Connect to the Local network', then click 'properties '.
  Search for "Client Service for NetWare" slot "this connection uses the following items."
  Click it, and then click the "Uninstall" button
  Restart your computer.

  Uninstall client for Netware feature will allow the option of quick change of user on your computer.

  I hope this helps.

• In XP, cannot change the way users log on and outside, getting the error "a recently installed program has disabled the Welcome screen and the user fast switching.

  The switch on my fast computer of user function has been disabled on my computer. When I try to use this function. I get the following message.

  A recently installed program has disabled the Welcome screen and the fast user switching. To restore these features, you must uninstall the program

  . The following file can help you identify the program that made the change. GT Gina.dll

  * original title - I have a windows xp. Under user accounts, choose a task. Under change the way users log on and outside.  I get a message that the function of the Welcome screen has been blocked *.

  Hello

  You can try the steps outlined in the article below and check out them.

  The logon screen "Welcome to Windows" does not appear when you start the computer
  http://support.Microsoft.com/kb/817142

• I can't access my home screen and the fast user switching!

  I get an error message when I try to change the way I connect
  "client services for NetWare has disabled the Welcome screen and the fast user switching. To restore these features, you must uninstall the Client Services for NetWare. "
  What is NetWare? Where is he? I don't find it on my program list to remove it! Help!

  To resolve this issue, follow these steps. NOTE: If you rely on access to a Novell network and need the Client Service for Netware or the Novell Client, you cannot use the home screen or fast Windows XP user switching features.

  1. If you are using the Novell Client, see the following Web site for instructions on how to uninstall Novell support:
     http://support.Novell.com (http://support.novell.com/)
  2. If you are using the classic view in Control Panel, double-click network connections. If you are using the category view, click on network connections and Internetand then click on network connections.
  3. Right-click each connection that you have, and then click Properties each time.
  4. Under the tab general in each Local network connection, select the Client Service for Netware, and then click Uninstall.
  5. In the Dial-up connection properties dialog box, click the Networking tab, highlight the Client Service for Netwareand then click Uninstall.
  6. Restart the computer.
  7. Open Control Panel, and then double-click user accounts.
  8. Under pick a task..., click on change the way users log on or off the power.
  9. Click to select the opening and closing of session options you want: use of the Welcome screen or use quick user change.

• I opened the game client for life despite the installation of the game has stopped working properly and the game closes that I said?

  I opened the game client for life despite the installation of the game stopped correctly and the game closes that I said?

  Hello

  What operating system do you use?

  I suggest you to follow the links and check out them.

  Method 1:

  Problems installing and uninstalling programs on Windows computers

  http://support.Microsoft.com/kb/2438651

  Method 2:

  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7

  http://support.Microsoft.com/kb/929135

  Note: After a repair, be sure to set the computer to start as usual as mentioned in step 7 in the above article.

• Games fps will be declining and the delay of the computer

  Hey I'm running windows 7 Home premium on my Compaq Presario cq5320f and I have 2 GB of ddr3 ram and my processor is AMD Athlon II x 2 240 and my previous diet was 250 w, I upgraded to 600 w and I also put a GPU inside the PNY GTX 750 so my problem was that I was getting fps dips I don't know if it's the RAM the cause because there is only 2 GB I have play the game like bf3 on med to ultra setting same thing happens to bf4 and I that if she could possibly be bottle neck of my GPU or if it's a ram issue because I am running windows 7 64 bit so I need help on this, don't know if I should move the ram to 4 GB 8 GB because this Compaq Presario has only 2 slots of ram ddr3.

  "so I'll get the 4 GB of fast ddr3 ram I can get."

  Get the same speed than what you already have. There are several reasons for this, but

  first of all, is controller of memory your motherboard (or possibly the CPU. I don't know if your cpu

  is new enough to have built the memory controller) can not handle any speed RAM knock you out in it.

  If you try to force a speed more than one level more than the card motherboard BIOS default

  (maybe not even that) you will most likely get BSOD (higher speeds may require system overclocking, and you really want to go with this machine).

  Second you will not see difference in the real world, even if the machine can use a higher speed.

  "try to run windows and the game both at the same time.

  Yes, an inevitable scenario, but do not avoid multi-tasking (narrow browsers, etc.) and have too many things running in the background - eg. Disable unnecessary programs from Starup via.

  System configuration (msconfig > startup).

  " " and really the game works well at 50 fps... and ends game like 10 FPS down every 10 seconds until '

  A 10 fps drop should not be serious. However, doping below 25 fps would cause serious delay.
  I can't offer any suggestions as to what your system RAM may work on stably. Support Compaq can help.

  Or go with a new kit of 4 GB of the same brand, speed, latency, and voltage as you have already.

  .

• Cisco ISE and the fast user switching

  Greetings,

  In our deployment, we are interested in using the "fast user switching" which lies in the functionality of Windows.   After searching for a while, I see that the native Windows supplicant is not compatible with the fast user switching.   It does not appear that Anyconnect is either.   Can you please inform me as to what suppluicant, I need research to enable the functionality of Switchign user?

  We currently use ISE 1.2 Patch 4.

  Thank you for any assistance.

  David

  Cisco EHT NAC Agent does not support Windows fast user change when you use the native supplicant. This is because there is not clearly the older user disconnecting. When a new user is sent, the Agent is hung on the ID process and the old user session and therefore a new posture cannot take place. According to Microsoft Security policy, it is recommended to disable the fast user switching.

  Source:

  http://www.Cisco.com/en/us/docs/security/ISE/1.2/user_guide/ise_pos_pol.html

• Div and the positioning of switching

  Hey I tried for a long time understand the concept to organize properly the div and the tables. I ask first my goal because it will probably be clear so I ask:
  
  I have a form in which the lower part must have one of the two formats according to the user choosing from one of the two choices in a drop-down list (Yes, it's deliberately not with radio buttons).
  If my guess is that what I have to do is have two div overlapping in this section and turn their visibility on or off (the mechanics of how to do so that I can understand, this is not what is difficult for me).
  But my understanding of divs (Please correct me if I'm wrong!) is that the z-index can be set only if the positioning is absolute. And if the positioning is absolute, how do I get the divs to be correctly positioned > relative < to the rest of the table in the form?
  
  Is actually a general question of how to organise the divs (for example, if I want this form to be centered on the page, not the absolute of the div positioning returns always the same position relative to the window, while the position of the table moves because it is centered?). I would also welcome with a reference to where I can learn about it...?
  
  Jonathan
  
  

  Well ultimately, I realized exactly what I wanted, but without further my understanding of the original topic, I was interested.

  I just use the attribute to display instead of visibility, so that I could put 2 divs right after the other and alternate their screens, so one or the other has taken the place the. It works fine but I still want to understand how to create dynamic web pages, using div tags that overlap. For example, for rollover menus... I'll wait until I have.

  Thanks for the help!

  Yet once, I really appreciate the help!

• 6b20eb: USB controller and w7 is graphic switching fort and back

  Can someone help me with this? I tried, without success

  PCI\VEN_1033 & DEV_0194 & CC_0C03

  Those who are supposed to be not installed USB drivers.

  Windows Update keeps on looking and I can not automatically select "update drivers" - it is grayed out.

  Also, I installed the drivers for this laptop radeon and windows is swinging back on non-Intel drivers and the screen seems afwul. How can I switch back? And how do I install the drivers intel? He told me that the system is valid for installation.

  ...

  I also have this a "PCI".

  PCI\VEN_10EC & DEV_5209 & CC_FF00

  And 2 unknown devices:

  ACPI\HPQ0004

  And also unknown:

  USB\VID_138A & PID_0018

  Hello:

  This is supposed to be the only driver that you need to install as it includes drivers for the Intel HD graphics card too.

  This package provides the AMD graphics driver high definition (HD) and Catalyst Control Center for models of laptop computers that are running an operating system supported. For laptops equipped with switchable graphics modes, this package contains the drivers for the two graphics (GPU). Switchable graphics allow users to switch between a graphical power mode (normally used under the power of the battery) and a mode of graphics performance. If the video output high-definition multimedia interface (HDMI) is supported, this package also installs the HDMI Audio Driver.

  File name: sp55092.exe

  USB3:

  This package provides the driver for host controller NEC Electronics USB 3.0 for the notebook models and operating systems. The driver allows USB 3.0 devices.

  File name: sp54479.exe

  PCI\VEN_10EC & DEV_5209:

  This package contains the driver that allows the Realtek card reader in laptop models running a supported operating system. The card reader allows users to read or write to removable storage cards supported, which are typically used in digital cameras, digital music players and cell phones.

  File name: sp55104.exe

  ACPI\HPQ0004:

  This will install HP 3D DriveGuard, which offers protection for internal laptop disk drive if the computer accidentally falls or suddenly hits another object. This package is available on mobile phones supported with supported operating systems.

  File name: sp57232.exe

  USB\VID_138A & PID_0018:

  This package contains the driver that allows the validity fingerprint sensor in the notebook models that are running a supported operating system. The fingerprint sensor analyzes fingerprints for use with biometric security applications.

  File name: sp56403.exe

• Whenever I have download one online game it asks me to have the latest graphic driver...

  then it gives me this HUGE list of pilots to choose, but idk if I have still a graphics driver on my PC or what kind it is, etc.  How can ensure me that I have the best for playing games online?  Yes, my windows updates are current and functional.

  BTW, I could play World of Warcraft very well but EQII shifted to death and I had to leave.  Lineage II does not lag at death, but of course, there is no go go go like WoW.  And I hate WoW and I never play it so I want to know how other games online to work to their full potential.

  How can I find out what kind of graphics driver I have?  If I look in the devices I see no category that says: Yo, graphics drivers here: file.

  Hello JemsCrystals,

  Thank you for using the Microsoft answers Forum.  My suggestions for you are to follow the steps described in this article and watch display adapter.

  http://windowshelp.microsoft.com/Windows/en-US/Help/2d8d5582-c5bc-4395-945f-5c6a273c5afa1033.mspx.

  Second, consider the recommendation on the websites of the games online that you would like to play, contact a sales person at your favorite computer store to inform them of your system configuration, including graphics cards and see what their susggestion are on a graphics card that would be compatible with Vista and suited to your gambling needs.

  Let us know if these steps solve your problem.  I hope the information is useful.

  Kind regards

  Anthony
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

• Welcome screen and the fast user switching disabled

  I have a problem getting the Welcome screen and switching user accounts. I get a message that "a recently installed program has disabled the display of welcome and Fast User Switching. To restore these features, you must uninstall the program. The following file name can help you identify the program that made the change;
  C:\WINDOWS\system32\BCMlogon.dll. Please help with this error. Thank you

  Also just a Word; recently changed the hard drive and reinstalled windows xp and many other programs. I have looked in windows and system32 and can find the file but am afraid to remove without causing programs that may stop working. Help, please.

  BCMlogon.dll is part of the Broadcom Corporation wireless network connection.   Uninstall or disable wireless on your computer Setup utility should solve the problem.  You might be able to do this in Control Panel > Wireless Setup by unchecking Let this tool manage your wireless networks .

• Graphics driver and the/3 GB switch on x 61

  Hello

  I use Windows XP (32 bit) and after I installed an upgrade 2GB bought recently (bringing the total to 4 GB), I added the switch/3 GB to the boot.ini file so that the system to recognize fully the RAM installed. The problem as a result of applying the switch is that the system will not load the graphics driver. Apparently, this is a known issue with some drivers as details by MS here - http://support.microsoft.com/kb/319043.

  Unfortunately MS's proposed solution is to install at least service pack 1 - XP SP2 installed so I the assumption would be that it I wouldn't have this problem. MS also suggest playing with / USERVA = xxxx switch - I tried at least 6 different settings (between 2700 and 2900) but in vain.

  All installed additional memory in a XP 32 bit x 61 and applied the switch / GB £? Or does anyone have any suggestions of something else I could try to make this work?

  Thanks in advance for your suggestions

  Paul

  Hi pmc101 and welcome to the Lenovo user community!

  You need a 64 bit OS to use all 4 GB.

  Windows/3 GB switch increases the virtual address that individual applications space accessed from 2 GB to 3 GB. It does not your X 61 to use more than 3 GB.

  For more information on the 3 GB limit, start this community FAQ.

• Using Framemaker, 2015, when editing, changes are NOT saved even after registration, including when you import new graphics.  Save, and then reopen the document and the old graphics are here and sometimes even old text.  Is this a known bug?

  Steps to reproduce:

  1. open a document in FrameMaker 2015

  2. change the document

  3 save the document

  4 open new document.

  5. unsaved changes.

  Embarrassing especially when doing the import images, old we remains same after the new update.

  Work in progress about-

  change the document twice and then save. The backup file would be the problem? Frame creates several tables backupfile and so the backup must be updated before the primary?

  Try the direct path - updates

• Services the customer has disabled the Welcome screen and the fast user switching it tell me to uninstall client services for netware, I can't locate this uninstall need help!

  I don't know exactly what the Client services program is named for uninstall.

  Hi BethGivens,

  ·         Have you made changes on the computer before this problem?

  I suggest you follow the steps in the article.

  Error message when you try to turn on welcome screen or Fast User Switching

  http://support.Microsoft.com/kb/315347

• Selection of scene and the PS3 with XBR65X900A

  Just upgraded my PS3 firmware and now when I select using my TV remote and sync Bravo it controls sensors to 'Photo select scene' and I hear no image, just my PS3. When I go to contol - Options - select scene TV, the only option I have is the picture. All other selections are grayed out. My PS4 works correctly, as does my FMP - X 1 and DirectTV Saturday.

  PS3 using HDMI 3 input

  PS4 using input HDMI 3

  DirectTv via HDMI 1 input

  FPM using input 4 HDMI

  PS3 and PS4 HDMI signal transmitted through Sony receiver.

  Any ideas?

  Thank you

  Bob

  Update:

  Not swapped the rec HDMI cable Sam passes to 1 HDMI XBR still no picture and the stage select switches to Photo, all others grayed. Different cable entry not using different HDMI does not Barvo Sync. Result I can't get no picture from my PS3 to my XBR65X900A. Worked before the upgrade of the PS3 this morning...

  OK, I found the solution... Press and hold the power button on PS3 for about 10 seconds. You will hear a beep and a Setup program appears to set up the HDMI cable. Instuctions to follow and which will give you the video output to your HDMI cable.

  Sorry for the confusion but, I thought that it was a function of the XBR65X900 while I posted here. Maybe this will help someone else.

  Bob