Games on Windows Vista do not work, error "player Extender to reinstall.

Similar Questions

• Windows Vista upgrades not work - error code 8007065E, 80070641 and 641

  Original title: windows Vista upgrade does not

  I tried to run updates and constantly getting the following errors:

  code 8007065E,

  code 80070641, and

  Code 641

  but can't them solved using Microsoft?

  Hello

  Did you the latest changes on the computer before this problem?

  Before the windows update follow the methods check if it works very well.

  Method 1: Put the computer in a clean boot state before proceeding with the installation of windows update.

  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7

  http://support.Microsoft.com/kb/929135

  Note: After installing windows update, follow step 7 in the link provided to return the computer to a Normal startup mode.

  Method 2: Temporarily disable the security software.

  Disable the anti-virus software

  http://Windows.Microsoft.com/en-us/Windows-Vista/disable-antivirus-software

  Note: Antivirus software can help protect your computer against viruses and other security threats. In most cases, you should not disable your antivirus software. If you do not disable temporarily to install other software, you must reactivate as soon as you are finished. If you are connected to the Internet or a network during the time that your antivirus software is disabled, your computer is vulnerable to attacks.

  Method 3: Run the Windows Update Troubleshooter.

  The problem with Microsoft Windows Update is not working

  http://support.Microsoft.com/mats/windows_update/en-us

  Method 4: Follow the steps in the section provided.

  How to reset the Windows Update components?

  http://support.Microsoft.com/kb/971058

  Difficulty of corruption problems MSI software update registration

  http://go.Microsoft.com/?linkid=9666880

  You can also manually install the update (numbers KB) by downloading from the Microsoft Download Center.

  http://www.Microsoft.com/downloads/en/default.aspx

  It may be useful

• Windows Vista does not work error message

  bought a laptop computer and after about 6 months of receiving an error message saying that vista doesn't work, simple answers, tried windows update, so far, no joy. all the other points of reference? Thank you

  Hi Archibalders.

  A. What is the exact error message?

  B. when exactly receive you the error?

  C. who is the manufacturer of your computer?

  D. recent changes made on your computer?

  Have e. you tried system restore option?

  If the problem is newer, you try to perform a restore of the system on your computer.

  http://Windows.Microsoft.com/en-us/Windows-Vista/what-is-system-restore

  http://Windows.Microsoft.com/en-us/Windows-Vista/system-restore-frequently-asked-questions

  Bindu S - Microsoft Support
  Visit our Microsoft answers feedback Forum and let us know what you think

• My automatic updates Windows Vista do not work? Error: Windows can't check for updates

  original title: My automatic Windows Vista updates do not work?

  My automatic updates Windows Vista do not work? There is no error code, it just says "Windows can't check for updates.

  I tried to use the fix from microsoft, it would join in the other responses, but it did not work.

  And have you tried resolution: method 2 in http://support.microsoft.com/kb/946414?

• Halo 2 for windows vista does not work on my windows 7. Saiys it cannot start the direct customer

  original title: Halo 2 for windows vista

  Halo 2 for windows vista does not work on my windows 7.  Saiys it cannot start the direct customer.  It will not work in single user either...

  Hello

  Plase make sure you have the latest version of the GFWL Client installed:

  http://www.Microsoft.com/games/en-us/live/pages/livemarketplace.aspx

• Windows Vista does not work - cannot open Control Panel control and IE

  original title: Windows Vista does not work properly.

  Hello

  I have Windows Vista Home Premium running on Lenovo laptop. Recently, I cann't open the browser IE, the same panel. I don't have a Vista CD. But I have the product key provided with the laptop. Please, help me to make it fully operational as before.

  Assuming that you can always connect to your computer in normal mode:

  Run a check of the filesystem to find corrupted files and repair them if possible.

  Start button > Search box type cmd > look up, do a RIGHT click on cmd.exe > click run as
  Administrator > in this window type cmd black and white, on the
  flashing fast sfc/scannow > press the ENTER key.
  Note: there is a space between
  'sfc' and ' / '.
  To sit and wait. It will take time.
  When finished, exit the cmd window.
  Reboot (restart your computer)

  After that, check if you can run the computer as well as to access the IE.
  If IE still does not work, use the following tutorials...

  1 Internet Explorer does not start or stop responding
  http://support.Microsoft.com/kb/926449
  Note: It has an auto FixIt application. Use it.

  2. Internet Explorer Add - ons problem when IE hangs or freezes
  http://support.Microsoft.com/mats/ie_freezes_or_crashes/en-us
  Note: there also an Fix It self.

  3. to resolve network connectivity problems in Internet Explorer
  http://support.Microsoft.com/kb/936211

• My Windows Installer does not work and I want to reinstall Windows. How can I do this?

  original title: Windows install

  My windows installer does not work. How can I reinstall my operating system?

  You will need to change the startup disk in the BIOS for the cd. Then boot from it. If you are installing windows from windows

• Update of Windows XP does not work, error 0 x 80245003. Cannot be updated to SP 3, can't update IE 6 to IE 8. How to solve these problems?

  Update of Windows XP does not work. I tried the correction of the error 0 x 80245003 and nothing has changed. Fix, that it won't work because SP 3 is not installed, because of the Windows Update does not. I try to install SP 3 manually, then downloader windows will not install reference SP 2 must be installed. SP 2 is installed. So I tried several ways to solve this problem, and I keep running into roadblocks of Windows. Help, please.

  Hi my NameJoel,

  See the methods mentioned below and check if that helps.
   
  Method 1:
  How to troubleshoot an installation fails on Windows XP Service Pack 3
  http://support.Microsoft.com/kb/950718
  Note: Antivirus software can help protect your computer against viruses and other security threats. In most cases, you should not disable your antivirus software. If you need to disable temporarily to install other software, you must reactivate as soon as you are finished. If you are connected to the Internet or a network, while your antivirus software is disabled, your computer is vulnerable to attacks.
   
  Note: A firewall is software or hardware that checks information coming from the Internet or a network. Then the firewalleither blocks information or allows information to pass to your computer. If the information is blocked or throughdepends spent on your firewall settings. A firewall can prevent malicious software (such as worms) to access your computer through a network or the Internet. A firewall can also help stop your computer from malware sent to other computers. Windows XP, Windows XP Service Pack 2 (SP2) and Windows XP Service Pack 3 (SP3) include firewall software.
   
  See also:
  You cannot install updates from Windows Update, Microsoft Update, or by using the auto update after a repair of Windows XP after installing Windows XP SP3 immediately after a clean installation of Windows XP SP2 or
  http://support.Microsoft.com/kb/943144
   
  Steps to take before you install Windows XP Service Pack 3
  http://support.Microsoft.com/kb/950717
  Note: Disable your antivirus software is not usually recommended, some software antivirus prevents certain system changing files. This can cause the Windows XP SP3 installation failure. To make sure that you manage to install Windows XP SP3, temporarily disable your antivirus software, including any third-party antispyware and firewall program. To do this, right-click on the icon for your antivirus program, and then click on disable. The antivirus program icon typically appears in the bottom right corner of the computer screen.
   
  Important: Make sure that you enable the antivirus software after you install Windows XP SP3.
   
  Hope this information helps.

• Windows vist does not work on startup, because it is disabled in windows defender

  Windows Vista will not run at startup.

  to use the computer to run the Task Manager, click New task and run windows
  I went into windows defender and it says that windows is disabled at startup
  How to activate it?

  Hi Deannabtc,

  I suggest you to check out the Microsoft article and check.

  Enable or disable the Windows Defender

  http://Windows.Microsoft.com/en-us/Windows-Vista/turn-Windows-Defender-on-or-off

  I hope this helps.

• Halo 2 for Windows Vista does not work on windows 7 32-bit computer

  Recently I have windows 7 installed on my computer and I installed Halo 2 for Windows Vista on this subject. I start the game, but before that I get a lot, it stops and I get a box that says Halo 2 has stopped playing for some reason any. He is looking for a solution and comes up saying that it does not find a waiting for Microsoft to find a. It happens the same thing every time.

  It seems that everything I needed an update. I went and did the updates and then began the game as administrator and it works fine now. I appreciate the help, though, and I don't know that your tips will help someone else as well. Thank you.  PS My game doesn't have the compatibility mode on it. Everything else is good. What is happening with this?

  Thank you all. Bubba

• Upcoming games with Windows 7 will not work on Presario SR1020NX. Upgrade Advisor said that W7 would work with the exception of the Aero

  W7 Upgrade Advisor said it would work with the exception of Windows Aero.  When the games to try to come with W7 get window 'game running in software rendering... '. Hardware acceleration disabled or not supported by the video card driver"games will not work. A check says last drivers are installed.  Tried to reinstall WXP in separeat partition to see if would work like that but will not because most recent W7.

  I suggest that you use XP personally gave a computer which is so old.

  If you have a computer with XP (3 + years) and have not changed at least two of these things (CPU, RAM, video card), you should probably stick with XP. Not worth the headache of praying that things work with a material more old which probably is no longer supported on the new OS.
  Usually, people that the computer was shipped with Vista 1, 2 or less it several years ago can be upgraded to 7 without too much trouble if it was a mid-range machine.

  In addition, it seems that Windows is not recognizing your graphics card. It looks like (http://www99.shopping.com/xPO-Hewlett-Packard-SR1020NX-CEL2-8-512-80-COM-XPH) you have an Intel Extreme graphics card. However, nothing about it is extreme. Since it is an extreme Intel card I guess Windows Update should find the drivers for you, but it is not then maybe the video card is just too outdated for 7? I'm not sure.

  Moreover, I wouldn't worry much about the lack of updates for XP right now. If ever you encounter more money then get the new computer with 7 on it, but at this time I suggest you stay on XP if your hardware and software actually works and that is more important than a few features of 7.

• my Windows vista does not update error code 80004002?

  ive tried setting the DOF but he never to work? I am running a Windows vista operating system 32-bit service pack 2 everytime I try to update code and the error pops up? [80004002]

  Run the system update readiness tool:

  http://support.Microsoft.com/kb/947821>

  Reset

  Then please try another attempt to update.

  You can reset the Windows Update components, but If the malware is present on the system update will still be blocked by the malware.

  (When was the last time you checked your system for malicious programs?)

  Suggest you try to have the system scanned both of the following in this order - do not jump...

  In addition to using an anti-virus, as Malware/spyware scan:

  http://www.Malwarebytes.org/products/malwarebytes_free>

  (MBAM) Malwarebytes is as its name suggests, a Malware Remover!

  Download the free Version from the link above.

  In addition, scan with the free Version of (SAS)

  http://SUPERAntiSpyware.com/superantispywarefreevspro.html >

  How to remove malware belonging to the family Rootkit.Win32.TDSS http://support.kaspersky.com/viruses/solutions?qid=208280684>

  ESET Online Scanner

  http://www.eset.EU/ESET-online-scanner>

  Access the article KB971058 via Internet Explorer (only)

  If no malware is present - How to reset components Windows Updates?

  http://support.Microsoft.com/kb/971058>

  Download and Save the 50202 Fixit of the above page.

  Close all the open programs and browsers prior to running the Fixit.

  Given that the downloads fail, when you run the Fixit choose it is the default mode when you run it the first time.

  When he finished, check if download updates now.

  If the updates are still not download after you run it, then run it again and choose his Aggressive mode.

  Then reboot and see if the download updates now.

  UTC/GMT is 18:05 on Saturday, January 14, 2012

• Restoring files of Windows Vista does not work - I have tried many, many things. Help, please.

  Hello

  I did a windows vista upward from some directories of laptop for my ReadyNas Storeage via the network.  The backup is is about 8 times before the hard drive on the laptop crashed.  We are unable to recover the HARD disk for thought I would recover from the laptop.

  Here's the problem:

  I use Windows Restore - Advanced Restore to try to recover from the previous backup.  After some fiddling, I am able to see that the program of restoring Windows backup sets.  I'm trying to restore all files to their original location.  The restoration done some preparatory work and then get the error message: Restore did not complete successfully. Error code: 0x8100001A

  Here is what I tried:

  (1) find the original Mediaid.bin file and copy it to the root.
  (2) run the following process to rebuild the mediaid. http://social.technet.microsoft.com/Forums/en-US/itprovistaapps/thread/56f5ed9b-8722-4fa8-b1e9-9c17d7132feb.
  (3) have successfully used windows Explorer to extract a single file.  (backup stuff windows are stored in zip files).  Problem, this only works for files below a certain size because I don't know how to merge files voluminous back.
  (4) copied the backup set off the ReadyNas to a USB to load from there.  It worked only when the USB, I have shared on the network.
  (5) have shot a question at JustAnswers, but they have not as well.
  (6) tried to restore a previous backup set but also failed with the same error message.

  Any help would be welcome.

  Thank you

  Hello

  for similar issues, see the links below and check.

  http://social.answers.Microsoft.com/forums/en-us/w7repair/thread/b489c071-cb79-4893-8942-188e20ed6f09

  http://social.answers.Microsoft.com/forums/en-us/w7performance/thread/5e368f95-5142-4B9F-AFB2-ccff9b646433

  http://social.answers.Microsoft.com/forums/en-us/w7network/thread/d7717978-290A-4f29-8e2d-5f6de0ebe0ff

  It will be useful.

• Windows Vista does not work for all programs requiring administrator rights

  I have Windows Vista Business SP1 on a Dell XPS laptop. He worked from 3-4 years. It seems that after a recent update (in the last week), I rebooted the laptop and after that Vista can not run programs that require administrator privileges. This includes most of the items in the Panel, the observer of events, computer management, elevated command prompt and so on.

  After logging in, I get a notification of the task bar that says "Windows cannot connect to the customer service group policy."

  When I try to any program requiring administrative privileges (for example, msconfig), I get an error "Windows cannot find C:\Windows\system32\msconfig.exe. Make sure you typed the name correctly and try again"

  I restored the system (from safe mode) for a day where it seems to be ok, but the problem remains.

  The sound in the system tray icon is a trademark of the Red Cross on it, but sounds work ok.

  Analyses of virus through McAfee (all installed updates and latest virus definitions) showed no signs of the virus.

  As already mentioned in the original post, System Restore does not resolve the problem. I got to the new vista installation to fix the problem. Some windows updates and reboot after applying the update seems to be the cause.

• Windows Vista does not work with modem wireless broadband

  I saw no answer to this problem.  Can anyone help?

  Windows Vista on my DELL laptop at home does not work with my new NETGEAR modem wireless broadband 3 G.  The modem appears in the list of networks, I just errors like: unable to connect, cannot diagnose,... Both devices work perfectly well together when connected by cable but not wireless.  Interestingly, my laptop work, also a DELL but runing Windows XP, works very well with the NETGEAR modem.

  Summary:
  Vista / Netgear wired - work
  Vista / Netgear wireless - does not work
  XP / Netgear wireless - work

  I went through the NETGEAR troubleshooting guide, doing everything from changing the types of security to manually enter the MAC address of the laptop.  I ran to the ground with the NETGEAR support engineers, and they said check with Microsoft.  I am convinced that it has something to do with Vista.  Any ideas?

  Hi jhandcc,

  Please provide the complete error message you receive.

  Step 1: You can follow the steps described in the article below

  Error message when you try to automatically connect to a wireless access point that uses authentication of network shared in Windows Vista: "Windows cannot connect to" " "»

  http://support.Microsoft.com/kb/948180

   

  If the problem persists,

  Step 2: Download and install the latest service pack for windows vista on the computer

  How to obtain the latest Windows Vista service pack

  http://support.Microsoft.com/kb/935791/

   

  Reference:

  You cannot connect to a wireless network on a Windows Vista-based computer

  http://support.Microsoft.com/kb/935222

   

  For more information, see the link below

  Solve problems, find wireless networks

  http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-problems-finding-wireless-networks

  Let us know if this helps

  Thank you, and in what concerns:

  Ajay K

  Microsoft Answers Support Engineer

  Visit our Microsoft answers feedback Forum and let us know what you think.