Games will not install after download.

I bought 4 games for my PC, Gears of war, Bioshock 2, FEAR 2 and Medal of Honor 2010. I bought all gear of war, but at the same time and has been download to install on my computer. All of them have completed the download and I'm going to install and 5% they install error and do not settle. I have tried to re - download and tried to re - install them but the same result. I would like to know what I'm supposed to do with it since I paid for them and are unable to use them. Is it possible that I can get the discs? Or can someone help me with the reason that the installation fails?

Hello

What operating system do you use?

Method 1:

If you use windows7, check compatibility if games support for your operating system.

Gears of war

http://www.Microsoft.com/Windows/compatibility/Windows-7/en-us/search.aspx?l=en-us&type=software&s=gears%20Of%20War

Medal of Honor 2010

http://www.Microsoft.com/Windows/compatibility/Windows-7/en-us/search.aspx?l=en-us&type=software&s=medal%20Of%20Honor%202010

Bioshock 2 http://www.Microsoft.com/Windows/compatibility/Windows-7/en-us/search.aspx?l=en-us&type=software&s=%20Bioshock%202%2c

FEAR 2

http://www.Microsoft.com/Windows/compatibility/Windows-7/en-us/search.aspx?l=en-us&type=software&s=%20F.E.A.R%202

Method 2:

I also suggest you perform the clean boot and try to install the games.

How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7

http://support.Microsoft.com/kb/929135

Note: After a repair, be sure to set the computer to start as usual as mentioned in step 7 in the above article.

Make older programs in this version of Windows

http://Windows.Microsoft.com/en-us/Windows7/make-older-programs-run-in-this-version-of-Windows

See also:

Problems installing and uninstalling programs on Windows computers

http://support.Microsoft.com/kb/2438651

I suggest also please contact the support of the Web site for the game CD.

Tags: Windows

Similar Questions

  • Download the new edge will not install after download.

    I am trying to download the new version of the edge disable cloud Downloader.  It downloads fine, but when it will install I get an error listed below.  All other programs seems to work very well and there is no connection blocked by my firewall.

    Exit code: 7

    Please see the faults and warnings below for troubleshooting. For example, caveat: DW020...

    -------------------------------------- Summary --------------------------------------

    -0 fatal Error (s), 0 error (s), 3 WARNING (s)

    WARNING: DW020: {E705A411-1622-40E3-902F-3109F34CCE60} Adobe Edge Animate 1.0.0.0 is in conflict with: {72CC24A1-A3A8-49CE-B1FF-0045356483B2} Adobe Edge Animate Preview 1.0.0.0

    Please uninstall this product, restart your computer and re-run this installer.

    WARNING: DW020: NOTE: cannot set the payload {E705A411-1622-40E3-902F-3109F34CCE60} action Adobe Edge Animate as contradictory 1.0.0.0 load is installed.

    WARNING: DW020: {E705A411-1622-40E3-902F-3109F34CCE60} Adobe Edge Animate 1.0.0.0 is in conflict with: {72CC24A1-A3A8-49CE-B1FF-0045356483B2} Adobe Edge Animate Preview 1.0.0.0

    Please uninstall this product, restart your computer and re-run this installer.

    -------------------------------------------------------------------------------------

    • Uninstall any previous version of the edge.
    • Restart your computer.
    • Open Adobe Application Manager and search for Adobe edge animate.
    • Download and install.

    That should do it.

  • Design Premium CS5 does not install after download for Mac.

    Design Premium CS5 does not install after download for Mac.  He says that the installer is corrupted.  It was downloaded from the other downloads page repeatedly.  Is there another way to download this file?

    When you ask a question you will need to provide some basic information

    -https://forums.adobe.com/docs/DOC-5601

    -Exactly which version of the operating system?

    IF El Capitan Mac read below

    CS6 and previous programs have not been tested and will not be updated to run on Mac El Capitan

    -which means you are trying to use CS6 and earlier at YOUR risk of having problems

    -You can get CS6 and previous programs to install and run, or you can not (some do, some don't)

    Maybe it's a fake because of Mac El Capitan and OLD programs error

    This information is a MUST to install old programs on Mac El Capitan

    -Java https://helpx.adobe.com/dreamweaver/kb/dreamweaver-java-se-6-runtime.html can help

    Install CS5 on Mac 10.11 https://forums.adobe.com/thread/2003455 can help (also for others than CS5)

    -also a TEMPORARY security change https://forums.adobe.com/thread/2039319

    -http://mac-how-to.wonderhowto.com/how-to/open-third-party-apps-from-unidentified-developer s-mac-os-x-0158095 /

    -the guardian https://support.apple.com/en-au/HT202491

  • First Pro CS5.5.2 will not install after the replacement of the motherboard?

    First Pro CS5.5.2 will not install after replacing mothboard. It was running properly for 4 weeks before changing due to problems connecting AC and wireless connectivity.

    Adobe, case No. 183519673, Adobe engineers (Asia/Pacific) have worked on this issue for more than 3 hours with no result after uninstalling and reinstalling.

    Ideas for resolving the issue wou; LD appreciated.

    Also available at the section of material http://forums.adobe.com/message/4634472

    There is a new forum for download & install and installation issues

    http://forums.Adobe.com/community/download_install_setup

    Or, call Adobe

    In the United States - Adobe install problems 800-642-3623

    In the United States - Adobe Activation 866-772-3623 Open 24/7

    I offered to provide information of make and model of motherboard

    [Additional information about else added]

  • Games will not install

    Some games appears to install but does not open when I click the icon to play. How can I fix this problem so games works?  Tried to install three 3 Pop Cap games.  Mystery P.I., Amazing Adventures The Lost Tomb and pen of the wizard.  The games were purchased as a collection "Occurrences of hidden object.  Is there something I can do to get these games to work?  Do I have to download a particular driver.  Any help would be appreciated.

    Hello, Paulette.

    First upward, I suggest to close all programs running in the background, including those that are running in the system tray (usually in the bottom right of the screen), don't worry the sound, network and action center icons (all white colored).

    Then try the games and see if they launch, default.

    Try to run the game in compatibility mode, by clicking on their icons and then select properties from the menu and click on the Compatibility tab in the new window.  From there, choose Windows Vista (service pack) from the drop-down list.  If this does not work - try the option of Windows XP SP3.

    Paul Smith - MVP for Windows desktop experience... I crawled off NNTP - for now. Detachment Aldershot, United Kingdom. On the internet at windowsresource.net and dasmirnov.net. Please post back to let us know what works and what does not. :-)

  • Solution Menu EX will not install after uninstalling

    My Canon MX882 all-in-1 would not go online last night. I ran the Wirless easy install the printer to make sure it was on my wireless network and it connected. The prinbter still showed offline in the printer status.

    I have unintslled all the sofeware Canon and drivers and all have said that they unintslled. I restarted and went through install it. Just what I instaklled appears, except Solution Menu ex it does not appear in programs and features, but when I try to install I get the message "a new version of the Canon Solution Menu EX is already installed. This installationb is cancelled. »

    How to force a reintsll or remove asnd cleaning the partially installed Canon Solution Menu ex

    This isn't earthshattering for me. I have a new laptop on the way and will reinsatlling everything on it. But it would be nice to install Solution Menu EX for now on my old computer.

    Short of reinstalling Windows 8.1, is there an easy way to get this problem fixed?

    Somne software providers offer a cleaning program to completely remove their products, just for a problem like this. The rationale for barrel of chance?

    I downloaded and install 3rd party software that is supposed to do, but they could not find Canon Solution Menu ex

    I met the same problem during the installation of the drivers from Canon and the software on my new PC. I uninstalled the Quick Menu of Canon Solution Menu EX installed. I tried to install quick menu and he told me that it was incompatible with the Solution Menu ex

    I went back and read the info about each feature and found the warning in the Quick Menu to say it can uninstall Solution Menu EX before installing the Quick Menu, but it doesn't have a warning in Solution Menu EX info.

    As Solution Menu EX was the feature of not install it, I read his information and that he had not seen any incom [atibility with Quick Menu. The warning message that Solution Menu EX is already installed is incorrect and confusing. It would be nice if the message had an extra warning that Quick Menu is incompatible with the Solution Menu ex

  • Windows Update will not install after reboot required.

    Update of security for Microsoft Visual C++ 2005 Service Pack 1 (KB2538242).

    I'm running Windows 7 x 64.

    I have a Windows update that requires the closing down to install.   This is not, and after reboot, I have a slower computer.

    At this point, even removing the offending program would be useful.

    Thank you for your expertise.

    Hello

    Try the methods provided below and see if they help to resolve the issue.

    Method 1:

    In the case where you are not able to install specific updates then, try the troubleshooting provided in the link below steps to fix the problem.

    You cannot install some programs or updates

    http://support.Microsoft.com/kb/822798

    Method 2:

    You can also try to reset the Windows Update components and check if that helps.

    Click on the link provided below for more information about resetting Windows Update components.

    How to reset the Windows Update components?

    http://support.Microsoft.com/kb/971058

    Method 3:

    Start the computer in a clean boot state and then try to download the updates manually.

    Put your boot system helps determine if third-party applications or startup items are causing the problem. If so, you need to maybe contact the manufacturer of the program for updates or uninstall and reinstall the program.

    See the following article in the Microsoft KB for more information on how to solve a problem by performing a clean boot in Windows Vista or Windows 7:

    How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7

    http://support.Microsoft.com/kb/929135

    Note:

    After troubleshooting, be sure to set the computer to start as usual as mentioned in step 7 in the above article.

    Download the updates manually from the link provided below.

    MFC Package security update Microsoft Visual C++ 2008 Service Pack 1

    http://www.Microsoft.com/download/en/details.aspx?displaylang=en&ID=26368

    MFC Package security update Microsoft Visual C++ 2005 Service Pack 1

    http://www.Microsoft.com/download/en/details.aspx?ID=26347

    I hope this helps.

  • iPhone only 6 more will not restore after downloading the new update.

    I was prompted to download the new update tonight once I started it, the download started like any other. Once restarted my iPhone, the iPhone connect to iTunes screen appeared. I connected my iPhone to my MacBook Pro and selected the "Update" option, the update has started to download on iTunes. Long story short, the iPhone will not update, I got a prompt that displays "an unknown error has occurred." I also tried to restore the iPhone and that also does not work. I also tried to put in DFU mode to restore via iTunes and that no longer works. I had problems with my iPhone with it restarts randomly, apps opening themselves and the flicker of screen and the freezing of old simply phone on a two screen tones. This is an iPhone brand new I just got last Monday. Help, please!

    Try troubleshooting help here > fix updated iOS and iTunes restore errors

  • Driver for Officejet 4500 Wireless all-in-one will not install after the upgrade to Windows 8.1

    Upgrade to Windows 8.1 on Pavilion g6.  OfficeJet 4500 Wireless all-in-one still print but not scan.  Downloaded driver full features.  Installation quit giving the error message "file not found".  Tried the 'chat' with no resolution sessions

    Thanks for the reply.  HP has called since then and was finally able to install the driver.

  • Vista updates will not install or download to the system

    When I try to update my windows vista by using windows update
    updates are not download on the system

    ALL THE TIME, IT'S THE STATE

    "0 KB TOTAL 0% complete"

    and I have downloaded a few of the updates manually, but everything does not progress further during installation that they show that "search for updates"

    I downloaded Vista sp1 manally, during installation, it gives an error code 0 x 80073712,.
    and it has some features don't appear in the Windows features dialog box,
    so I tried
    Sfc/scannow , but it gives a message "there is a system repair pending which requires the restart ends."  Restart
    Windows and run sfc again. "I restarted the translated run Sfc/scannow , but it gives the same message again.

    in Control Panel, tab updates installed, I found 2 windows updates point being (KB929300 and KB110806) installed, I try to remove them but they re appear in the list after the update, click

    Another thing is start the computer whenever a message "PLEASE WAIT" followed "updated CONFIGURATION"

    I try to install downloaded from microsoft windowsupdateagent30 - x 86 , but it also gives error 0 x 80073712

    I also try to install the file. Windows6 0-KB947821-v4 - x 86 , but no progress in installing is seen.

    I tried these steps in your response to my post at the start

    "Step 1:
    Stop the automatic updates service and Background Intelligent Transfer Service...

     

    Click on start / all programs/accessories. Right-click on "command prompt" and select "run as administrator". Click on 'Continue' in the UAC prompt.
    At the command prompt, type the following commands and press ENTER after each command:
    net stop wuauserv
    net stop bits

     

    Step 2:
    Rename the Catroot2 folder...

     

    Type the following commands and press ENTER after each command.
    net stop cryptsvc
    Ren %systemroot%\System32\Catroot2 oldcatroot2
    net start cryptsvc

     

    Step 3:
    Rename the folder "C:\Windows\SoftwareDistribution"...

     

    Type the following command and press ENTER.

    Ren %systemroot%\SoftwareDistribution SoftwareDistribution.old

     

    Step 4:
    Save the files used by Windows Update and Microsoft Update...

     

    At the command prompt, type the following commands, press ENTER after each command, and then click OK every time that you receive a verification message:
    regsvr32 c:\windows\system32\wuapi.dll
    regsvr32 c:\windows\system32\wuaueng.dll
    regsvr32 c:\windows\system32\wucltux.dll
    regsvr32 wups2.dll
    regsvr32 c:\windows\system32\wups.dll
    regsvr32 c:\windows\system32\wuwebv.dll

     

    Step 5:
    Starting the Service Background Intelligent Transfer, the automatic updates service and the event log service...

     

    At the command prompt, type the following commands and press ENTER after each command:
    net start bits
    net start wuauserv
    net start Eventlog
    output

     

    Restart the computer, then try Windows Update. "

    After that restart windows update give the same error code 0 x 80073712

    Hello, tanveerpallipuram

    Please use the Forum for answers!

    Do not forget that you have installed these three updates prerequisite for SP1:

    (http://support.microsoft.com/kb/935509/) A software update is available for versions of Windows Vista that include the BitLocker Windows Drive Encryption feature.
    (http://support.microsoft.com/kb/938371/)  (http://support.microsoft.com/kb/938371/) A software update is available for the Windows Vista installation components.

    If you are using 32-bit Windows Vista: download the update for Windows Vista (KB937287) package now.
    If you are using 64-bit Windows Vista: (http://www.microsoft.com/downloads/details.aspx?FamilyID=5639710d-dfbf-4527-806e-9a1634d0cc8e) download the update for Windows Vista for x 64-based systems (KB937287) package now.

    You can find more information at the following link: http://support.microsoft.com/default.aspx/kb/937287

    We can't wait to hear back from you with your results.

    David
    Microsoft Answers Support Engineer
    Visit our Microsoft answers feedback Forum and let us know what you think.

  • 8.1 will not install after updating

    My computer laptop (Acer Aspire V5-122P-0643) was running bad so I ran a refresh on it.

    After the update, I installed all the updates important and then tried to reinstall 8.1 but when I press the tile into the store it dose literally nothing no nothing just the error. I can't 'trust' my laptop so I spent account.live.com/trustdevice and entered everything, including the code sent by text, but nothing helped. Another problem is that if I try to install an app on the store it is stuck on standby.

    I think that all these things are related, but do not have a solution or all tracks.

    S ' ensure that you apply the latest updates before upgrading.

    -Try to switch to a wired connection if you download over Wi - Fi

    Disable/uninstall no matter what third-party Antivirus, you may have installed before the update.

    -Do a clean boot.

    http://support.Microsoft.com/kb/929135

    You can find the details here for which the update is necessary to see the Windows 8.1 update.

    If you encounter problems with the installation of Windows Update, we recommend that you post for help with this question.

    You can also try an automated solution by running the Windows Update troubleshooting tool

    3. you must synchronize your App license; You can do this:

    * On the start screen, tap or click on Store to open the Windows store.

    * Drag from the right edge of the screen, and then tap Settings.

    (If you use a mouse, point to the lower right of the screen, move the mouse to the top and then click settings.)

    * Tap or click App updates

    * Press or click on Sync licensing

    4. the Windows store catalog is not refreshing properly.

    To refresh the catalog, try pressing the Windows key and R to open the Run dialog box type WSReset.exe and press ENTER. Restart, then check again the store Windows.

    also:

    http://blogs.technet.com/b/ouc1too/archive/2013/10/25/something-happened-in-the-install-of-Windows-8-1-can-t-be-completed-and-now-you-re-annoyed.aspx

    1. press Windows + W and put updates in the search box, select view installed updates search results.

    2. in the window updates installed, search the update for Microsoft Windows (KB2871389) and right-click on it, select uninstall.

    3. now, using the following links, download the update KB2871389 manually package for your edition of Windows 8 and install it:

    Download link [All versions supported on x 86 Windows 8]

  • Service Pack 1 will not install after that the pc has been reset to the factory settings

    At my pc reset due to problems of crashing and freezing factory settings, when turned on after resetting received masses of updates Service Pack 1 has not been installed, but it shows in the story as being successful. He reappears in the form of waiting for update installation, but when the terms & Condtions accepted the installation takes a few seconds, history shows successful but it has not yet installed. So I can't install SP2 to update Internet Explorer 9

    Hello.

    Thanks for the reply. I found a previous question with a similar problem as mine, there was a solution that I followed and was able to install SP1. I should have done this before my question!
    I also installed SP2. Resetting to the factory settings was a last resort due to a problem I was experiencing, but after installation of SP2 my original problem reappears. The problem is now in terminal phase and looks like a new pc.
    In any case, once again thanks for your help, I know where to go with future questions I have.
    John
  • Why don't Muse, Acrobat, SDK and Scout game will not install to App location defined in CC Desktop App?

    Hello

    I put in the control panel of Creative Cloud Desktop for Mac Os X the/Applications/Adobe installation location, the folder that contains the folder Adobe Flash Player.

    (before I asked someone to support and I got confirmation that I can do).

    After installing a long list of applications, I see that Acrobat, game SDK and Scout are in the main folder and Muse uses the folder to/Applications/Adobe as its own folder; now the folder/Applications/Adobe has the icon of the Muse and inside are all the application folders, app of Muse and a legal folder (which I think is Muse).

    Is it possible that ALL Adobe applications are installed in the same folder? Can I just drag these rebel software in place?

    Can I just drag these rebel software in place?

    Yes, you can. Otherwise, this works because it is designed. You're just whacking things a bit by calling uncleverly to your "Adobe" folder, which causes a mess in installers as - tada - they try to create folders and subfolders under this name, as well. You know, trying to thwart the installer can have all kinds of adverse effects...

    Mylenium

  • Creative cloud will not install after using the Apple Migration Assistant to transfer again Mac

    I used Migration Assistant to transfer applications to a new Mac. Creative cloud threw an error. I used uninstaller to remove the Creative app clouds, then downloaded the new version of the Adobe site. When you try to install, the installer of creative cloud crashes before installation.

    I then launched an application, he said I need to save it. So I logged into my account, turned off all previous installations on other Macs. My apps work now. However, I still cannot install creative cloud desktop application (same behavior takes place).

    I use the latest version of Yosemite on a Mac PowerBook.

    Try

    Click on Finder and then hold down command + SHIFT + G keys on your keyboard

    It will open to go to the window of the folder, type exactly ~/Library and click Go

    Then open Application Support > Adobe files

    Files Recycle Bin AAMUpdater and OOBE.

    Click on finder and press command + SHIFT + G keys on your keyboard.

    This time, type / library and click on Go.

    Be sure to remove ~ symbol.

    Then open Application Support > Adobe files.

    Basket AAMUpdater, Adobe Application manager, records OOBE.

    Go to the Finder / Applications / Utilities

    Trash Adobe Creative Cloud and Adobe Application Manager files

    Cleanup tool download and run CC below link

    e http://helpx.Adobe.com/Creative-Suite/KB/CS5-cleaner-tool-installation-problems/_jcr_conte nt/main-pars/accordion_container_1/accordion-par/accordion-item-1/accordion-item-par/proc dure/proc_par/step_3/step_par/download/file.res/AdobeCreativeCloudCleanerTool.zip

    Accept the license agreement and click Adobe Application Manager

    Click then on clean selected

    Re install Creative Cloud application and check

  • msft net 1.1 SP1 for XP (KB2833941) will not install after dozens of attempts. How can I fix it?

    Cannot install for many months now.  How to find the problems and fix?  Thank you!

    Try a different version for .NET 1.1

    Try this link.

    http://www.Microsoft.com/en-US/Download/details.aspx?ID=26

Maybe you are looking for

  • lack of drivers windos 8

    Hello I have a HP Pavilion dv7 Notebook PC IM missing drivers for win 8 to material characteristics ACPI\VEN_ENE & DEV_0100 ACPI\ENE0100 * ENE0100 and ACPI\VEN_HPQ & DEV_0004 ACPI\HPQ0004 * HPQ0004 where can I find the drivers for those Thank you

  • Re: Qosmio F30-141 does not open CD/DVD drive

    Hello My brother has a problem with the Cd/Dvd drive to open. There is a disc inside and he can't get out pressing the eject button. We guess, the drive is broken. Help, please.

  • Events to reduce tree

    Hello I don't understand how the EVENT_COLLAPSE and EVENT_EXPAND work on a tree control. By using the following code case EVENT_EXPAND:GetTreeItemAttribute (FL_TreeListPanel, TREE_LIST_LIST, eventData2, ATTR_COLLAPSED, & FL_ItemCollapsed);break; FL_I

  • Error Code 80071AA7

    I received the automatic update of windows Vista and another program and tried to update and receive error code 80071AA7. I could not find data on this code on microsoft. Thoughts, or ideas what this code means?

  • Freezing of funds

    Hi my name is Danny. I have a desktop computer running windows xp home edition and intel pentium D with card mother foxcom. My problem started about 7 weeks ago with my pc is freez anything. I ran the scan disk and Defrag virus scan many many times w