GarageBand loses audio when mixer microphone USB is connected

Hi all.

GarageBand works very well with Axiom 49 > USB hub > adapter for camera > iPad Pro

As soon as I plug the USB cable from the console, if it is turned on or not, all the audio outputs disappears from the iPad - speakers or headphones. Green level meters indicate keyboard works selected tactile instrument (no audio output during playback touch screen instrument, either).  If the mixer is 'on', indicated both mic level signal.

Followed the instructions GarageBand for iOS: no sound when the external device control - Apple Support

  • Settings > general > accessibility: Mono Audio is disabled
  • Settings > Garageband: Guitar Amp crosstalk Protection is disabled

What Miss me? New to Go.

iPad Pro 12.5 "

iOS Version 9.3.1

GarageBand version 2.1

The lightning to the USB 3 Camera adapter

Belkin 4-port hub powered UB 3.0

Controller keyboard Axiom 49 generation 2 USB MIDI

Alesis MultiMix 4 USB mixer

XLR microphone cable

Sennheiser e835 mic

Update:

From what I can tell, Alesis MultiMix 4 USB is not compatible class, so it's likely not work with iPad and Linux.

Consider a different route to enter mic iPad. I play bass, so it would be nice to have a quiet interface which can manage both.

Rick

Tags: iOS Apps

Similar Questions

  • laptop loses picture when the hdmi cables are connected

    laptop loses picture when I connect the laptop HDMI cable to HD TV

    Help, please.

    Thank you.

    Try pressing your "fn + f5" together until both monitors are on. The combination of keys is to pass between the monitors. In your case, the first time, it should turn on the laptop screen and turns off the second monitor, the second must turn them both on. On some computers, it's the f4 key and on dell is the f8 key, the key is usually the image from one monitor to this topic.

  • Why do I lose Audio when I activate the Multicam mode

    I'm tryin to edit a multi angle concert. All Audio works fine until I did a right click my files, go to several cameras and click Activate. Then my audio plays more. I have ' Audio follow video ' selected in both reading muli-cam monitor. If I disable multiple cameras on the audio files works again. Help, please. I sent the audio mixed/mastered far and want to get all my video editing done for when the file is back on Monday.

    You must activate all audio tracks. See the following page: http://helpx.adobe.com/content/help/en/premiere-pro/using/editing-multi-camera-sequences1. html #id_60276

  • audio output lists only the internal speakers when usb is connected to the dac

    This problem happened after I had used my mbp for months as music server in a stereo system.  When I have the mbp connected via USB to an external digital to analog converter (dac), audio preferences had always listed the CAD.  Now it lists only the internal speakers.  I tried to reboot, checked my UBS cable, checked my dac.  The only thing I've done recently is to create a playlist and sync a new iPod to copy the playlist we.  I don't know if that could have anything to create the problem of lack of dac, but I am a relative novice on computers.

    Anyone have this problem or knows how to fix?

    -Try other USB port

    -The signs to see the CASD of life like the lights on?

    -Maybe the CAD failed.

    -Try the following

    -Try to reset memory NVRAM/PRAM and SMC

    MacIntel: Reset of the controller (SMC) system management

    https://support.Apple.com/en-us/HT201295

    Subject of memory NVRAM and PRAM

    https://support.Apple.com/en-us/HT204063

    -Try to start safe mode

    OS x: what is Safe Boot, Safe Mode?

    https://support.Apple.com/en-us/HT201262

    -Start to recovery and repair the startup disk

    OS X: on OS X Recovery - Apple Support

    https://support.Apple.com/en-us/HT201314

    -If it is repairable reinstall the OSX

    How to reinstall OS X on your Mac - Apple Support

    https://support.Apple.com/en-us/HT204904

    -If you do not have a backup using disk utility to restore the internal drive to an external drive, so that you can try to recover the data.

    Format the boot disk and then do a fresh install of Mac OS x

  • Audio Dany u 2000 usb tv does not not in windows 8?

    Audio Dany u 2000 usb tv does not not in windows 8?

    Read more: Dany u 2000 usb tv audio not working in windows 8? - Dany u-2000 usb tv works on windows 7 but when i install on windows 8 audio did not work. In tv software audio only detect microphone device.
     

    Azhar,

    Dany u 2000 tv usb does not appear on the Windows Compatibility Center and so I think that it is not compatible with Windows 8.

    It would be best to contact the Technical Support of Dany Technologies for assistance on this issue.

    The link is: http://www.danytech.com/presentation/viewcontent.aspx?Content_Id=5

  • Audio stops when the mp3 player is connected

    So, I had one of these cheap ipod shuffle mp3 player knock-offs. When I plug USB, audio stops playing in my speakers. When I unplug audio is back to my speakers. I think windows think that my mp3 player is an audio device such as a helmet, and so when I plug it in, it redirects to the USB port. No one knows how to tell windows not to think about my USB/mp3 player as an audio device, so I can keep the audio goes to my speakers to.

    Solved.

    My computer-> manage-> device-> Audio-> disabled device manager unknown device that was be CS002

  • Losing audio when I 'maintain audio pitch' on video acceleration

    After the last update, I lose the audio when I select 'maintain audio pitch' on video acceleration... If I have to deselect her, the audio is back (with the squeaky voice). It's very weird... any ideas?

    Joel

    Hi JoelHicks,

    Please see this: bug Audio V2015.3?

    Thank you

    Regalo

  • First Pro CC v8.1, caravan drops audio when importing

    I've updated PP CC to 8.1, caravan - and the first project that I opened was to be updated of course.

    That is - a clip of .mov with audio on it which played perfectly before the update has no audio attached to it--and when they are imported - the uadio is not imported.

    1. the clip plays in VLC with audio - opening of windows Explorer.

    2. the original clip that played with the audio in the previous version of PP not changed somehow.

    3. after importation of the successive copies - it's never audio tied there now.

    Any ideas what has changed to make a clip already very well - he lose audio s in the last PP?

    Thank you

    Dave

    Same problem here with a few clips.

    Do not drag and drop to import.

    Some browser workarounds use multimedia or cmd + i. try renaming the files (.mp4-> .mov, mpg-> .mpeg) try to rename Footagefolder.

  • I found that if it becomes necessary to use time machine to return to an earlier existence to reinstall the iphoto library, if for some reason, you lose lose, then when you try to synchronize your ipad is not recognized by the computer.  As one

    I found that if it becomes necessary to use time machine to return to an earlier existence to reinstall the iphoto library, if for some reason, you lose lose, then when you try to synchronize your ipad is not recognized by the computer.  So when you try to synchronize the pictures, they are all removed from the ipad and trying to reinstall everything again.

    This may or may not work immediately.  In my case, only half the photos have been installed, and then the error message came that the rest of 9000 can be installed.

    I contacted Apple support team who has made various suggestions.  Subsequently clicking on a photo list in iTunes were all going again and pictures of 9000 then installed.  When I asked the support team what could happen I was told that it was a "glitch".  I don't like seeds they mean that there could be an error in coding somewhere.

    Here me again.  I use an iMac and iPad.  I don't know why XP and iPhone came.

  • suddenly stops when the external usb hub is attached

    My imac 27 inches 5 k 2015 suddenly stops when an external USB hub is attached supposedly designed specifically for the mac. (Cutting) The mac does not start I have to unplug it and reconnect to restart. I tried different hubs of this manufacturer and all do the same thing. Remove the hub, the computer is fine. Any ideas?

    Well, try an another factory USB hub, I had good success with USB hubs powered from Belkin.

    Question... are the hubs help powered or are bus powered USB? They are bus powered USB is your problem, the USB ports on iMac didn't supply enough power to power bus-powered USB hubs.

  • My keyboard loses functionality when I try to leave comments on Facebook. Delete, BACKSPACE, apostrophe and cut, copy and paste are disabled.

    My keyboard loses functionality when I try to leave comments on Facebook.

    Delete, BACKSPACE, apostrophe and cut, copy and paste are disabled. This only happens in the comments, no functionality is lost in the mail or status updates.

    I disabled all my Add-ons and restarted Firefox and the problem persists. I've updated modules, restarted Firefox and the problem persists.

    I updated Firefox and that made no difference.

    I deleted the cookies and cache and still no luck.

    SOLUTION: I disabled the add-on Grammarly Lite and this seems to have solved the problem.

    I informed the Facebook of the show. I can't find any information about this problem in troubleshooting of Facebook.

    I can't reproduce this problem in Internet Explorer. All functions work fine.

    I have the same problem on another device that is running Windows 7 Starter and a laptop running Windows 8.1.

    Separate the issue;
    Shows details of the system;

    Plug-ins installed

    Shockwave Flash 15.0 r0
    Shockwave Flash 11.5 r502

    Having multiple versions of a program can cause problems.

    Take uninstaller from here:
    Uninstall Flash Player | Windows
    Uninstall Flash Player | Mac
    Reinstall the latest version.

    Flash Player v15.0.0. 239 http://get.adobe.com/flashplayer/

  • Satellite A300 - 1 ms PSAG8E - dropouts audio when fan on / off

    Satellite A300 - 1 ms PSAG8E

    Hello.

    I've got audio when dropouts power fan. Possible let the fan always on?...

    Thank you.

    > I've got audio when dropouts power fan. Possible let the fan always on?...
    Check the energy saving settings!

    If you are using vista you will need to search in Vista power settings.

    + How to manage Windows Vista power management features.
    http://APS2.toshiba-tro.de/KB0/HTD84026Q0000R01.htm

    Welcome them

  • USB not connected when you try to scan

    My Photosmart C4280 prints fine, but when I try to scan, it says USB not connected

    Hi laughingface, sorry to hear that you have some question when scanning. So I can help you better, can I please have the model number of your printer as well as the operating system on your computer (Windows XP, Vista, 7, 8 - 8.1 or Mac).  Please write back to your convenience and I'll be happy to help you.

    Thank you.

  • How to use transfer windows for xp to xp. When I plug usb computers are delivered to the top with the same screen and when I try to use the transfer to the new computer, it just said information gathering and sits for hours

    How to use transfer windows for xp to xp.  When I plug usb computers are delivered to the top with the same screen and when I try to use the transfer to the new computer, it just said information gathering and sits for hours

    Hello, welcome.

    The process is automatic and the maximum transfer rate should be about 20 GB/HR. If the process crashes during that long of a time, it's probably because of something internal rather something you're doing wrong.
    For reference purposes, I included this link. It goes into the details of the migration from XP to Vista (and the basic steps you follow). The instructions are for migrating to Vista via the network, but you can easily follow the steps and choose a different option for your specific installation.
    For both machines, I recommend you to prepare for the transfer using the following procedure:
    1. click on START > run
    2 type "msconfig" (without the quotes) and press enter
    3. go to the "Startup" tab and uncheck all the entries displayed
    4. click on 'Apply' at the bottom right
    DO NOT RESTART YOUR COMPUTER AGAIN
    5. click on START > run
    6. Type "cmd" (without the quotes). Right-click on the result at the top of the menu START and select 'run as administrator '.
    7. type chkdsk /r and press enter
    8 allow the system to attempt disassembly of the volume
    9. allow the system to plan restarting
    10. restart your computer
    11 let checkdisk analyze the file system on your hard drive
    12. Once completed, perform the same steps on the other machine
    13. Once completed, repeat the transfer

    Let us know what happens
    Thank you!

    Ryan Thieman
    Microsoft Answers Support Engineer
    Visit our Microsoft answers feedback Forum and let us know what you think.

  • Rockband Microphone USB

    How to use the microphone usb rockband on my pc?

    Hello

    Normally you plug the microphone and it stands.

    Needed to do a right-click on the speaker at the bottom right - recorders - right-click the properties and mic
    and make sure that it is enabled and other parameters are correct.

    Come with any software, the documentation or help?

    If necessary check with its manufacturer support.

    I hope this helps.
    Rob - bicycle - Mark Twain said it is good.

Maybe you are looking for

  • Portege R830: display resolution set by default with Port Replicator

    Hello I have a speed HI PA3916A-1PRP port replicator for my R830.Whenever I start the laptop in the port replicator, the display settings for the screen of the laptop and external monitor goes back to some default that I didn't have before. Rang of T

  • Portege M400 EZ5031 - not see HD disc format

    When the Portege M400 EZ5031 formatting I do not get to reinstall the windows XP or Vista, it reads door CD/DVD, the installation, but it is not HD, it says that the media do not exist in the computer. the solution has been ultilizar the windows98 wh

  • Publish a web or my-RIO service

    Hello and good day to you all. IAM trieng to publish a simple web service on the NOR my RIO which turns on and off one of the LED dashboard. If I run the application normally it works, but if I try to post I get an error message that says: no web app

  • Spaces and tabs to scan from String

    Hi all.  I'm sure this question has been answered before, but I couldn't find exactly what I was looking for. I have problems with the scan string function.  My format string specifies the tabs (\t) as separators between several settings, but it also

  • help me get into my emails

    my hotmail and messenger have been blocked, I put my password in the wrong, it is undergoing restoration, but I really need to check my emails urgently because I am starting work and some important emails, also waiting for answers from som of the Uni