GarageBand wasn't able to install the new sounds
I'm under GarageBand 10.1.2 & OS X El Capitan 10.11.6 on a Macbook Pro 13 retina "(2016).
A couple of weeks, that I have installed additional drummers with no problems. I noticed, however, that many of the sounds in the sound library had an icon to download next to them; so I went to the GarageBand menu, option "Sound Library / download all the available sounds" and they begin to download immediately. Most of them have installed fine (and is still usable), but at some point the download has stopped and a window appeared with the message "GarageBand wasn't able to install the new sounds. Close and re-open GarageBand to download and install again. »
Since then, whenever I open GarageBand, downloading continues automatically, but after a few minutes I get the same annoying message.
I searched the Internet and tried all the following without success:
(1) closed and reopened GarageBand
(2) given in market system
(3) delete the folder "/ private/var/folders/lq/nb_0wt4d1zq5rs933745flww0000gn ' and all its contents
(4) remove the "user/Library/Caches" folder and all its contents
(5) the latest version of Java from Oracle (update version 8 101 - build 1.8.0_101 - b13)
I always feel the same frustrating lock when I open GarageBand (download starts and after a while it stops and the error message shows up again... and again once).
I've included some screenshots on this post below, which illustrate the issue.
Thanks in advance for any help you can provide me with!
Just to be sure - you have enough free storage to install all the new sounds? The instrument only GarageBand library has 14GB on my Mac.
Until you try to install the sounds still launch the Console application and look for messages of diagnosis in the Console, when GarageBand gives the error message. Are there clues, all messages associated with GarageBand in the Console window?
Sometimes third part applications or incompatible system additions could cause this kind of problem, as firewall and antivirus software, for example, Little Snitch or Kaperski. If you have any of these installed, disable it before attempting to download the software.
To prevent the non-standard extensions system to interfere, restart the Mac in Mode safe, before you try to install again, see: try safe mode if your Mac does not commissioning - Apple Support
Tags: iLife
Similar Questions
-
previoously when such a thing happened two years back I downloaded and installed the windows Installer 4.5 and installed. This solves the problem. now of recurrence of the same problem.
Hi mbaye,.
1. What is the full error message that you receive?
2. have you already tried to reinstall Windows install 4.5 and check?
Method 1:
You can try to start the fixit from the following link and check if it helps.
Solve problems with programs that cannot be installed or uninstalled
Method 2:
You can also try the steps in the following article to resolve the problem.
How to solve problems when you install or uninstall programs on a Windows computer
-
Original title: lack of pilot bwbcmwin32installer_2.10.6.msi
Hello community!
I encountered this problem: (I'm in Oz)
all by installing the new modem USB 4 GB (above the required windows driver error message) wouldn't load the Device Manager software.
I found later talk to telco support that the previous version of the software (3G network) must be uninstalled (not so advised in the documentation provided with the device)
The next attempt to uninstall the old software has failed (what a surprise displayed the same error message as mentioned above)
Tried to use the old device and now it don't work either.
Y at - it a good soul out there that will help please (it's no surprise that telstra has been giving me the run around for 2 weeks now)
Hi IVsWebBrowserUser,
Welcome to Microsoft communities. The problem description, I understand that you are not able to install the new 4 GB USB modem. Provide the following information:
· Did you do changes on the computer before the show?
· What is the full error message?
· The question is limited to this device?
Follow these methods.
Method 1: Try to use the USB device to a different USB port and verify.
Method 2: Try to use the USB device on another computer.
Method 3: Follow the steps in the article.
Advanced troubleshooting tips for General USB for Windows XP problems
Let us know if you need more assistance.
Thank you.
-
Failed to install the new flashplayer from adobe
Original title:
Adobe flash player
I'm still not able to install the new flashplayer from adobe, message reads, close glplayer and try again, Please HELP ME
Flash Player
First of all, try to enable Active Scripting in the areas of Sites Internet Options, security settings, trust.
You should also add a corrupted on.
Click Start, type: Internet Options
Press enter
Select the "Advanced" tab
Under reset Internet Explorer settings, click "reset".
This should restore the Internet Explorer default settings.
Then reinstall Flash Player
http://get.Adobe.com/flashplayer/
----------
Flash Player
Troubleshoot installation of Flash Player for Windows
http://kb2.Adobe.com/CPS/191/tn_19166.html
Troubleshooting player stability and performance
http://blogs.Adobe.com/JD/2010/02/troubleshooting_player_stabili.html
Uninstaller
http://kb2.Adobe.com/CPS/141/tn_14157.html
Flash Player Support Forum
-
Install a new subscription but only able to install the trial version 30 for Photoshop and Lightroom
Product number: 10368249259 Odered monthly subscription of the creative cloud - photographer (Lightroom and Photoshop). When I tried to install I only be able to install the Trail version (30 days). Can you help me?
Please visit: https://helpx.adobe.com/manage-account-membership/cc-reverts-to-trial.html
-
Just installed the new Win10 great Update.When iTunes will connect with Gracenote?
Just installed the new major update of Win10. When will be able to connect with Gracenote when you import music from a CD to iTunes?
It doesn't seem to be a link between issues with Gracenote and updates of Windows 10. The last - which is usually accompanied by a cryptic error "no error" message, or one that says 'User unregistered for use online' - usually come from corruption to one of iTunes preference files. Try the following:
- Quit iTunes
- In the Windows search box, enter %APPDATA%\microsoft\windows\sendto in the address bar, press
. This will open the C:\Users\username\AppData\Roamingfolder. Then open the Apple Computer and in this framework the iTunes file. - Delete the following files:
- CD Info.cidb
- com.apple.iTunes.Gracenote.plist
- Restart iTunes
- Insert a CD and see if details are now correctly retrieved from Gracenote
If this does not work:
- In iTunes, select Edit > preferences and a note (or take a screenshot) of your settings preferences in all tabs
- Quit iTunes
- Repeat step 2 in the previous procedure to open the C:\Users\of\AppData\Roaming\Apple Computer\iTunes user namefolder.
- Delete the following file:
- iTunesPrefs.xml
- Restart iTunes
- Restore your settings to preferences iTunes to those that you noted in step 1.
- Insert a CD and see if details are now correctly retrieved from Gracenote
If no si aucun succes success so far, try to repeat the two procedures above, using records C:\Users\username\AppData\Local\Apple Computer\iTunes and C:\Users\username\AppData\LocalLow\Apple Computer\iTunes.
If it wasn't (and most people reported that the problem is solved by one of the two procedures above):
- Quit iTunes
- In Windows, select Start > Control Panel > Add / Remove Programs. Look for the entry of iTunes, right click and select Rrepar.
- When this process is complete, restart iTunes
- Insert a CD and see if details are now correctly retrieved from Gracenote
If the problem persists, you may uninstall and reinstall iTunes - see tips to the user of turingtest2 on troubleshooting issues with iTunes for Windows Update for more details of the steps necessary to remove completely all the components of iTunes before reinstalling.
-
HP Pavilion DV6-6c35dx: potential problems with OS driver install the new hard drive?
I want to spend the hard drive of my laptop, but my laptop did not come with recovery discs. I buy a full copy of Windows 7 Professional, but I did save it... because when everything has failed, I guess. If I'm able to reinstall Win 7 Home or if I have to install Win 7 Pro, how can I be sure to reinstall all drivers HP (p. ex., trackpad, meaning cool, beats audio, etc.) for my machine? It is best to download the drivers before you install the new hard drive and have them ready on a flash drive. or is there an easier way? Thank you.
I personally prefer the new OEM installation & then get required drivers to download for HP support for your laptop model.
It is slower and more difficult to do if it is not too well known, but the end result is much better.
If your system has flaws you should try to fix first, but better long-term results come from clean install generally.
-
Satellite L630-10R - cannot install the new display driver
I wanted to update my display driver, so I removed the 'old', but now I can not install new, when I start the Ati catalyst Wizard there is no display driver must be installed, I can only install the new installation manager. In addition, my graphics card has been recognized as HD 5145 by windows and is now recognized as HD 4500 Series.
How I can install the new drivers?
Hey,.
Why you wanted to update the display driver? Have you had any problems?
Well, I also put t know why you are not able to install the display driver, but where did you downloaded the current version? Toshiba page or the ATI site?
I recommend you to download the drivers of Toshiba page only because pilots are pre-tested by Toshiba.What operating system is installed?
Usually, you can also install the drivers manually through the Device Manager. This is why open Device Manager, select the graphics card and choose update drivers. Then use advanced installation where you can choose the driver directory yourself. -
How do we install the new update from Windows Update for Windows
When I go to Windows update, with what he gets to do the updates that I need to install the new Windows Update for Windows Update. I click on install after a few minutes she returned with the same page but with a red shield on the left. Does anyone know what I can do to fix this problem. I was not able to do the updates for a few weeks now.
Hello
1. you receive an error message or error code when running Windows Update?
2 have you made changes on the computer before this problem?Follow the methods below:
Method 1:
Follow the suggestion mentioned in the article:You cannot install some programs or updates
http://support.Microsoft.com/kb/822798Method 2:
Run an analysis of auditor of system files on your computer and check for the issue.
How to use the System File Checker tool to fix the system files missing or corrupted on Windows Vista or Windows 7
http://support.Microsoft.com/kb/929833
Method 3:
Download preparation tool system update version of operating system and control accordingly.
http://support.Microsoft.com/kb/947821Hope the above information is helpful. -
Installed the new HD - cannot set up (XPS 400)
Hello and congratulations in advance for anyone who can help me with this!
Recently, my Dell XPS 400 crashed and would no longer boot (it worked, but it wouldn't boot because of damage to the discs dual-core). I decided to buy a new HD to replace the old thinking that would solve my problem... not so much. So here's what I've done and the question:
(1) I took out a secondary drive, replaced by my OLD main drive
(2) I installed the NEW drive into the slot where my OLD main drive used to reside
(3) for the reset, I reached a display using the key CTRL-I command that told me that I now had a disc in which I could use to 'mirror' of the old drive, which is now bootable. Of course, I followed the instructions to do this in order to get my computer started.
(4) while the process worked, it seems that my NEW drive disappeared completely and I have not reached my goal to replace my old hard drive AND my computer, it starts now, always gives me error messages and does not occur at the height.
Can someone help with this problem who is familiar with what I'm on everything? I would be eternally grateful!
Theoretically, I want to do is to completely replace the hard drive with my new drive, use the old BACKUP disk as the new secondary drive and plug the OLD external drive for me to remove files that I need them. A small crease is that I do not have the Windows XP disks for the software that came with my old computer and I am unable to get them, however, I don't have the disks copied on a separate disk, which seemed to work for the resettlement, but I'm not sure of whether or not it would work on a hard drive completely blank.
In any case, could someone provide any help would be greatly appreciated!
Linux has to read your old files very well. It is not the OS, you need to worry, but instead, the applications you want to use. For example, you were using different Microsoft Office to create data files, you would find that in order to make the use of these old files, you need something that is compatible with Microsoft Office to read or modify. Fortunately, there are applications that can do it. Open Office is one of them, and I'm fairly certain that they have a version that runs on Linux. The only thing you will not be able to do it is using Microsoft Office because it will not install on Linux. You will encounter similar problems with each type of file that you created. In most cases, you will be able to find compatible substitutes for original programs, but there are exceptions.
EDIT: I have to say that I forgot to mention that I'm talking about Windows XP in the paragraphs above with regard to service packs. If you use Vista or later, the Council does not apply.
I have heard many good things about the different themes of Linux, but like anything else, I'm sure he has his own set of problems. Most people seem to not run into them very often, and many just love it because it helps to avoid many problems presented by Windows.
If you really want to go back to Windows, and people of Dell cannot accommodate you at a price you will find reasonable, you could try e - Bay or similar online store. It is my understanding that a lot of people sell their old floppy disks to install OEM Dell through this kind of output. You need an installation CD of Windows from Dell that incorporates at least Service Pack 2, and Service Pack 3 would be nice. The old installation diskettes don't work well on many computers produced since 2005 because of the change of PCI - e for the video. Older drives simply do not have the drivers for the PCI-e bus. If your computer is old enough to use AGP or earlier, it is not so much a problem.
The computer is always looking for your old disks because the BIOS setting told him to do. When you delete a record permanently, you should return to the controller settings in the system setup (F2 during the automatic test after a start screen) and stop the ports having no disc attached. This allows the BIOS to know to ignore these ports.
EDIT: I have to say that I forgot to mention that I wrote about Windows XP in the present paper dealing with service packs. Floppy disks to install Windows occurs more early than those with Service Pack 2 have no drivers for video PCI-e which is used on most computers since 2005. You don't need to worry about this problem for Vista or later version.
-
I have a new all-in-one Canon Pixma MG5320. I am unable to get the installer to finish with on "setting up the network printer down." Despite numerous attempts to:
(1) download the driver on the internet instead of the installation CD.2) with the help of msconfig with selective startup and disabled all programs except Microsoft.(3) creates the new administrator account and returned through it all.(4) turned off firewall and anti-virusThe error is compatible and I never have the unit set up under devices and printers. The installation is carried out without any errors marked and you will see the error if you get into the details of setting up and get him. The computer sees the printer when it finds and he answers. The printer and the router, both seem to be communicating correctly. Repair auto and troubleshooting programs I ran as fix - it do not detect errors. The printer works fine through a USB cable. I don't want to continue to use USB because that's why I wanted to go wireless. I'm sure that I forget some of the things I went through in my attempts to get this working. Anyone with any ideas or know what's going on please help.Tech of Cannon was very knowledgeable and says he sees this once a month. He believes that some program interferes with the installation process. I do thanks in advance. Nice day.Hi Gary,.
Thanks for posting in the Microsoft Community.
From the description of the problem, you are not able to install the printer Pixma MG5320. I'll be happy to help you on this question.
Let us try the steps from the following link:
Solve printer problems
http://Windows.Microsoft.com/en-us/Windows/printer-problems-in-Windows-help#fix-printer-problems=Windows-7&V1H=win8tab1&V2H=win7tab1&V3H=winvistatab1&v4h=winxptab1Hope this information is helpful and let us know if you need help with Windows in the future. We will be happy to help.
-
Hi people
I'm on Windows 8, and in these last days, I get this message
" " Windows Update was not able to verify the new updates for the last 30 days, go to windows update to resolve this problem"
It is on a blue banner that goes directly to the screen and it is very annoying
I get updates through so I do not understand this
Any help would be great
PS I have tryied the restoration of the system, and it's always the same
Lee was soon
Original title: looking for some help please
Hi Lee,.
I had this same problem and it drove me crazy, but I solved it.
I clicked on the link above that 'Shubham Chin"gave, and in this link all the topic, if you click on the topic" my PC is not responding all by searching for the or to install updates.
below that it will then say "try to run windows update convenience store", click on that and it should get rid of this very annoying pop to the top and other problems with your laptop... hope I helped :)
-
Why you're not able to get the new June 20th, 2016 updates on your creative cloud, if you are running Windows 7.
So I spent all day on this because Adobe did not anywhere that I could find it. But I'm hoping some of you to save a lot of time wasted... you can't upgrade to the latest version of the application if you have not all updates to Windows 7.If you're like me and do not want anything to do with the Windows updates... you may encounter the same problem. Summer/don't I am not at all interested in Windows 10 (who they are sneaking into regular updates) so I don't usually have enabled updates. If you don't... you cannot upgrade your program to the latest version. Creative cloud not even give the option.
I think it's the Microsoft Visual C++ or something like that who needs update to run the latest version of the software... If you do not have it on your system, you do not install the new updates properly, but be careful not to download sneaky windows 10 "update." Know how it's called blindly here before update you.
I hope that helps some of you save a whole day unnecessarily.
Some programs on a win os to visual c ++ 2015, Download Visual C++ Redistributable for Visual Studio 2015 of official Microsoft Download Center
-
Just installed the new upgrade of LR of the cloud and it opens not only flash for a nano second, any thoughts?
Tried again and after signing in to the CC Office was able to open LR Cloud 2015. Thanks for your help.
-
Cannot install the new version of the browser of ACC...
Anyone able to do install? Guard sent me errors
There is a related post:
http://forums.Adobe.com/message/3653241
Basically if you have an older version of the browser (before May 2011) and try to upgrade to a newer version you must uninstall the old version and install the new version from scratch. The problem is related to a change in the required certificate to sign the application AIR (from Adobe) that has two incompatible versions.
If you do not have the installed browser and/or have a version reasonably new post please the navigator version and possibly a screenshot of your error. "Gives Me the error" isn't really very useful
Maybe you are looking for
-
How to re - activate the Site Plugins
When you select the "always enable Plugins on this page", what to do if they chose "Never Run."... "by any chance? Or to erase the configuration of the Plugin by site list?
-
Flow 11: 11 stream Webcam blurry
I have a netbook HP flow 11 is in a State of almost nine. Everything is going well except the webcam product a blurred image, and there is change of color. for example, my light blue eyeglases gaze. I tried to install YouCam, but it is blurry, there
-
display empty satellite 3000 - x 4
Please, I beg you.can anyone help?I have a sat 3000 - x 4 while adjusting the screen resolution recently I can put something wrong, now, when win xp (home) starts I get the splash screen, then the screen goes black, connenting to an external monitor
-
Let Mackeeper do a scan on my iMac, and now this am with a dialog box that says "download is required to remove Tapsnake from your Mac. My mac is iMac 27 inch El Capitan 3.2 GHZ Intel Core i5 8 GB memory Had not noticed anything unusual or bad before
-
Qosmio G30-163. Try to install Win Xp Pro on the new HARD 120 GB drive
Hi all I am trying to install Win Xp Pro on a new 120 GB HARD drive, but windows setup does not recognize the HARD drive.I have only to install a (formatted) HARD drive on the laptop as main.The secondary place for HARD drive is empty. Can you please