Garbage in Orchestration server entries: responsibilities

I see in the Orchestration server properties of the my CPO - tab of responsibilities, there are 3 entrances for subscription AMQP. On the 3, I use one in some of my workflows. But the other two "unknown (some id)" is not available in the POC and not used in a process or workflow. Am not able to find these entries under target AMQP. I tried to restart the POC service to see if these entries get flushed. But that didn't work either. Can someone explain please how to remove these entries?

Thank you

Anish

Did you have before AMQP targets and then delete them or something?

Probably something hanging in the DB that should be removed. I suggest a TAC case and have them checked.

Tags: Cisco DataCenter

Similar Questions

  • Tidal Enterprise Orchestrator Server service is stopped.

    Hello

    I try to install tidal Enterprise Orchestrator in Server 2008.

    We managed to install the application.

    I built the Server 2008 which is acctually followed by requirements in order to install TEO.

    But "Tidal Enterprise Orchestrator Server service" has not yet begun.

    When I started service TEO, the underside of the messages appeared in the Windows event log.

    ------------------------------------------------------------------------------------------

    Unhandled exception has occurred.

    Tidal Enterprise Orchestrator Server service is stopped.

    System.NotSupportedException: Named member is not supported in a dynamic module.

    System.Reflection.Emit.AssemblyBuilder.get_Location)

    ------------------------------------------------------------------------------------------

    Any help is appreciated.

    Shinya salvation!

    There could be several reasons why the service does not start. Support should focus on your newspaper, so please do the following...

    (1) send an email to [email protected] / * / with your Cisco ID and the question

    (2) generate logs of the server by going to start-> programs--> Cisco--> TEO-> Diagnostic Utility. Run this wizard and take the defaults and have these ready logs for the Customer Support engineer who will contact you after receiving your ticket.

    (3) a couple of quick things you can do compared to Windows 2008 are:

    * Make sure that UAC is DISABLED

    * Make sure that you can access the cryptographic keys. This by going to C:\ProgramData\Microsoft\Crypto\RSA\MachineKeys, you probably need to enable hidden files/folders see this path. Try to open one of these files in this directory. If you * don't * you will need to save in the MachineKeys directory and give everyone access to this directory.

    in any case, we will look forward to see your SR come and help!

    Thank you

    Shaun Roberts

    TEO support team leader

    [email protected] / * /.

  • VMware vCenter Orchestrator Server service cannot be started

    After doing a clean install on the build version 5.1.1 2942, the VCO service will not start. All points configurations are green, VC to the top and running, the service account used for the service of a member of the local administrators. The event in the system log id reported as 7024, below error text:

    VMware vCenter Orchestrator Server service stopped with the error service particular incorrect function...

    If anyone has an idea, please advise. Thank you.

    Thanks for the tip. I was able to start the service by stopping the Foglight Quest agent running on the box first, then by restarting VCO. The article stresses that increase the RAM would help, however the virtual machine has been set to 10 GB, with abundance available for the JAVA virtual machine, but I always saw the issues mentioned in the wrapper.log file.

  • Cisco 877W DHCP does not automatically fill the Windows/Mac customers with DNS server entries

    I have a 877W which was operational on Verizon for about 5 years. It never automatically distributed info DNS server for customers who get DHCP issued IP address. I have to manually enter the DNS entries to each client.  What happened to other sites where I've got installed on AT & T as well as 877 unified communications.

    Here is the config. Thanks in advance for the help.

    Building configuration...

    Current configuration: 7987 bytes
    !
    version 12.4
    no service button
    tcp KeepAlive-component snap-in service
    a tcp-KeepAlive-quick service
    horodateurs service debug datetime localtime show-timezone msec
    Log service timestamps datetime localtime show-timezone msec
    encryption password service
    sequence numbers service
    !
    Cod of hostname
    !
    boot-start-marker
    boot-end-marker
    !
    logging buffered debugging 51200
    recording console critical
    enable secret 5 jSwA $1$ $ 3B5lJNqm0ewh
    !
    AAA new-model
    !
    !
    AAA authentication local-to-remote login
    local remote of the AAA authorization network
    !
    AAA - the id of the joint session
    !
    resources policy
    !
    PCTime-6 timezone clock
    PCTime of summer time clock day April 6, 2003 02:00 October 26, 2003 02:00
    IP subnet zero
    IP cef
    No dhcp use connected vrf ip
    DHCP excluded-address IP 192.168.7.1 192.168.7.19
    DHCP excluded-address IP 192.168.7.70 192.168.7.254
    !
    IP dhcp pool sdm-pool1
    import all
    network 192.168.7.0 255.255.255.0
    router by default - 192.168.7.1
    DNS-server 68.238.96.12 68.238.112.12
    !
    !
    inspect the IP name DEFAULT100 cuseeme
    inspect the IP name DEFAULT100 ftp
    inspect the IP h323 DEFAULT100 name
    inspect the IP icmp DEFAULT100 name
    inspect the IP name DEFAULT100 netshow
    inspect the IP rcmd DEFAULT100 name
    inspect the IP name DEFAULT100 realaudio
    inspect the name DEFAULT100 rtsp IP
    inspect the IP name DEFAULT100 esmtp
    inspect the IP name DEFAULT100 sqlnet
    inspect the name DEFAULT100 streamworks IP
    inspect the name DEFAULT100 tftp IP
    inspect the tcp IP DEFAULT100 name
    inspect the IP udp DEFAULT100 name
    inspect the name DEFAULT100 vdolive IP
    synwait-time of tcp IP 10
    IP domain name cods.com
    name of the IP-server 68.238.96.12
    name of the IP-server 68.238.112.12
    property intellectual ssh time 60
    property intellectual ssh authentication-2 retries
    !
    !
    Crypto pki trustpoint TP-self-signed-437228204
    enrollment selfsigned
    name of the object cn = IOS - Self - signed - certificate - 437228204
    revocation checking no
    rsakeypair TP-self-signed-437228204
    !
    !
    TP-self-signed-437228204 crypto pki certificate chain
    certificate self-signed 01
    30820254 308201BD A0030201 02992101 300 D 0609 2A 864886 F70D0101 04050030
    2 060355 04031325 494F532D 53656 C 66 2 AND 536967 6E65642D 43657274 30312E30
    69666963 34333732 32383230 34301E17 303731 30313632 33333131 0D 6174652D
    395A170D 2E302C06 1325494F 03550403 32303031 30313030 30303030 5A 303031
    532D 5365 6C662D53 69676E65 4365 72746966 69636174 652 3433 37323238 642D
    06092A 86 4886F70D 01010105 32303430 819F300D 00308189 02818100 0003818D
    BF73E16C 24A3FB0B A44C83C8 45ACEC75 163C2F0A 87836F7F A43FEB72 0EF26AFA
    C7F35ED6 CBCC6853 5E82B0A6 1FD8020B F3630023 AB30B870 B3155EE6 86988910
    4ACF5121 1CBFF4DC B705DF1E 5D0D698F 06493 D 3DD8D036 42 FE450D21 E26A4DAF
    CE6BA806 81A9F451 0246698E DA7B49E3 160F115C E1104FA9 31FA3C15 CD 782 279
    02030100 01A37E30 7C300F06 03551 D 13 0101FF04 05300301 01FF3029 0603551D
    20821E63 11042230 6F64732E 6F666472 63697479 6E677370 69707069 72696E67
    732E636F 6D301F06 23 04183016 24 D 77493 80142FA3 03551D 52CF7094 B847B6EB
    1385E2E5 0F3A301D 0603551D 0E041604 142FA324 D7749352 CF7094B8 47B6EB13
    85E2E50F 3A300D06 092 HAS 8648 01040500 03818100 076EE499 12F46D79 86F70D01
    375B7EA6 C9279DA4 B32723B5 908C9FB8 D42CB978 BB24A8FE 73579A3D CA 5130, 87
    B7716644 7E13710D C6E6360C D0A36F7B F62540E2 0C33523B E50396B9 2EF66FA7
    56519E62 E55EAF3C E1D9BEC9 3AE67B59 75E61F06 B649E90A 2798F755 7A020F0A
    F8BDABFA 1EE37B6A A918560D DA45AD70 801BC66E 94D1468E
    quit smoking
    username privilege 15 secret $5 1jgO$sGD@#l4yTtLtYoEZbh/Wl steal551.
    !
    !
    door-key crypto vpn_ddaus
    pre-shared key address 0.0.0.0 0.0.0.0 - key stealthfortyfor5
    door-key crypto vpn_rmlfk
    address of pre-shared-key 205.30.134.22 key stealthfortyfor5
    !
    crypto ISAKMP policy 10
    md5 hash
    preshared authentication
    Group 2
    !
    crypto ISAKMP policy 30
    BA 3des
    preshared authentication
    Group 2
    invalid-spi-recovery crypto ISAKMP
    ISAKMP crypto keepalive 20
    !
    Configuration group isakmp crypto VPNRemote client
    key ConnectNow45
    pool ippool
    ISAKMP crypto vpnclient profile
    VPNRemote identity group match
    client authentication list for / remote
    Remote ISAKMP authorization list
    client configuration address respond
    Crypto isakmp CODS_DDAUS profile
    key ring vpn_ddaus
    function identity address 0.0.0.0
    Crypto isakmp CODS_RMLFK profile
    key ring vpn_rmlfk
    function identity address 205.30.134.22 255.255.255.255
    !
    !
    Crypto ipsec transform-set esp-3des esp-sha-hmac RIGHT
    !
    Crypto-map dynamic dynmap 10
    Set transform-set RIGHT
    vpnclient Set isakmp-profile
    Crypto-map dynamic dynmap 12
    Set transform-set RIGHT
    CODS_DDAUS Set isakmp-profile
    !
    !
    MYmap 1 ipsec-isakmp crypto map
    defined by peer 205.30.134.22
    Set transform-set RIGHT
    CODS_RMLFK Set isakmp-profile
    match address CODS_to_RMFLK
    map mymap 65535-isakmp ipsec crypto dynamic dynmap
    !
    Bridge IRB
    !
    !
    interface Loopback10
    IP 1.1.1.1 255.255.255.0
    !
    ATM0 interface
    no ip address
    route IP cache flow
    No atm ilmi-keepalive
    DSL-automatic operation mode
    !
    point-to-point interface ATM0.1
    Description $FW_OUTSIDE$ $ES_WAN$
    Check IP unicast reverse path
    inspect the DEFAULT100 over IP
    NAT outside IP
    IP virtual-reassembly
    PVC 0/35
    aal5snap encapsulation
    !
    Bridge-Group 2
    !
    interface FastEthernet0
    !
    interface FastEthernet1
    !
    interface FastEthernet2
    !
    interface FastEthernet3
    !
    interface Dot11Radio0
    no ip address
    no ip-cache cef route
    no ip route cache
    !
    encryption vlan 1 tkip encryption mode
    !
    SSID tsunami
    VLAN 1
    open authentication
    authentication wpa key management
    Comments-mode
    WPA - psk ascii 7 14231A0E01053324363F363B36150E050B08585E
    !
    base speed - 1.0 2.0 basic basic-5, 5 6.0 9.0 basic-11, 0 12.0 18.0 24.0 36.0 48.0 54.0
    root of station-role
    !
    interface Dot11Radio0.1
    encapsulation dot1Q 1 native
    no ip route cache
    no link-status of snmp trap
    No cdp enable
    Bridge-Group 1
    Bridge-group subscriber-loop-control 1
    Bridge-Group 1 covering-disabled people
    Bridge-Group 1 block-unknown-source
    No source of bridge-Group 1-learning
    unicast bridge-Group 1-floods
    !
    interface Vlan1
    Description $ETH - SW - LAUNCH, INTF-INFO-HWIC $$ $4ESW $FW_INSIDE$
    no ip address
    IP tcp adjust-mss 1452
    Bridge-Group 1
    !
    interface BVI1
    Description $ES_LAN$ $FW_INSIDE$
    192.168.7.1 IP address 255.255.255.0
    IP nat inside
    IP virtual-reassembly
    route IP cache flow
    IP tcp adjust-mss 1412
    !
    interface control2
    IP 70.14.49.134 255.255.255.0
    NAT outside IP
    IP virtual-reassembly
    crypto mymap map
    !
    local pool IP 10.10.10.1 ippool 10.10.10.254
    IP classless
    IP route 0.0.0.0 0.0.0.0 70.14.49.1
    !
    IP http server
    local IP http authentication
    IP http secure server
    IP http timeout policy slowed down 60 life 86400 request 10000
    overload of IP nat inside source list 133 interface control2
    !
    CODS_to_RMFLK extended IP access list
    IP 192.168.7.0 allow 0.0.0.255 192.168.1.0 0.0.0.255
    !
    recording of debug trap
    access-list 1 permit 192.168.7.0 0.0.0.255
    access-list 100 remark self-generated by the configuration of the firewall Cisco SDM Express
    Access-list 100 = 1 SDM_ACL category note
    access-list 100 deny ip 70.14.49.0 0.0.0.255 any
    access-list 100 deny ip 255.255.255.255 host everything
    access-list 100 deny ip 127.0.0.0 0.255.255.255 everything
    access ip-list 100 permit a whole
    access-list 101 permit ip 192.168.7.0 0.0.0.255 192.168.3.0 0.0.0.255
    access-list 133 deny ip 192.168.7.0 0.0.0.255 192.168.1.0 0.0.0.255
    access-list 133 deny ip 192.168.7.0 0.0.0.255 10.10.10.0 0.0.0.255
    access-list 133 deny ip 192.168.7.0 0.0.0.255 192.168.10.0 0.0.0.255
    access-list 133 deny ip 192.168.7.0 0.0.0.255 192.168.3.0 0.0.0.255
    access-list 133 allow ip 192.168.7.0 0.0.0.255 any
    not run cdp
    mymap permit 10 route map
    corresponds to the IP 111
    set ip next-hop 1.1.1.2
    !
    !
    control plan
    !
    Bridge Protocol ieee 1
    1 channel ip bridge
    Bridge Protocol ieee 2
    IP road bridge 2
    connection of the banner ^ CAuthorized access only!
    Unplug IMMEDIATELY if you are not an authorized user. ^ C
    !
    Line con 0
    no activation of the modem
    telnet output transport
    line to 0
    telnet output transport
    line vty 0 4
    privilege level 15
    transport input telnet ssh
    !
    max-task-time 5000 Planner
    Scheduler allocate 4000 1000
    Scheduler interval 500
    end

    Hello

    Can you try to remove the IMPORT ALL of the dhcp pool

    RES
    Paul

    Sent by Cisco Support technique iPad App

  • VCenter Orchestrator Server - invalid connection login

    I 5.1.0 build 1123966 installed with Orchestrator on a separate virtual computer.

    When I go to set up the connection to a server vCenter Server, I can connect using the button 'Test connection' very well.

    However, Orchestrator reports an 'invalid login' all pages 'administer '.

    Details:

    User logs (I tried to share a single session - no difference)

    SSO is supported by Active Directory.

    RSA CERT is imported.

    The clocks are synchronized to NTP.

    Orchestrator is to get his Server vCenter license. (License server has been very well with the value of domain\user)

    User account is part of the vcoAdmins group.

    Username is currently defined as User@fqdn (also tried domain\user).

    Using SSL on port 443 /sdk path.

    I am confused and would appreciate any suggestions.

    -david-

    Ok. He tracked down but it's kind of weird.

    I had the Orchestrator account in the Group of vcoAdmins@system-domain linked to the AD account. (that is, the vcdAdmins@system-domain are included as part of the Group's user@my-domain)

    I gave up and added user@my-domain (same account, same area, same AD server)

    Orchestrator client is restarted.

    Alto! No problems.

  • Departure Orchestrator Server service fails with error 1053

    Hi all

    One of our servers VCO does not start the VMwareOrchestrator service, it returns the above error. He was executed successfully, but the VCO service account password has expired, so I had to update. I checked the following:

    -VCO active service and good password account verified

    -VCO member of that server's local administrator group account service

    -Re-running VCO web config, everything configured and green status

    -Able to connect successfully to basic VCO and vCenter server using the account of Service of VCO

    The other interesting thing is I removed the server.log file, but is not be recreated when I try to restart the service.

    Can anyone advise on what I might be missing with this config? Thank you.

    Locate the orchestrator.bat file and start from the command line.

    Christophe.

  • How to move the workflow of an orchestrator server to another

    I have Setup initially orchestrator on a trial basis spread and the configuration of the workflow, now, I drove outside the actual configuration and would like to move the workflow that I did in the original test on my current Server Setup. Any ideas?

    Now you can see one of my favorite parts of the Orchestrator.

    • On your dev server, open the Client Orchestrator

    • Click on packages

    • Create a new Package

    • Change the package

    • Click the 'Workflows' tab in the right

    • Add all the workflow that you created

      • All flows of dependent work, actions, etc. will be added automatically

    • Click on each of the other tabs in the right and did not forget to add additional resources that you created

    • Save your package and close

    Now, you have two choices:

    1. Export the package, and then import it on the production server

    2. Right-click on the package and select "synchronize".

      • When you are prompted, enter the IP address of the server production or FQDN, username and password

    In both cases above, you will be provided with a summary screen that shows the items that will be added to the production server (represented by a green arrow).

    Enjoy!

  • Remove additional DLNA server entries from list of music and videos on BDP-S3100?

    As I was getting my computerized DLNA server set up, I tested it on my Sony BDP-S3100. Now, I have multiple entries for the same server in the areas of music and video.

    Is there a way to remove the extra entries WITHOUT resetting the drive? I hate having to re-enter all my logins for my other apps.

    Thank you!

    Answering my own question later for others...

    You can remove DLNA servers in the categories of video and music by going to network settings > Renderer access control. "He's list all DLNA servers, the player has in memory. There is an option to erase all or you can delete individual items by using button menu option .

    So glad I figured this out, it was really annoying me!

  • What is the function of server Orchestrator?

    What is the relationship between vcenter orchestrator server and the web client?

    and what is the function of server Orchestrator?

    The 'server' is the workflow engine. It holds all the configuration, workflow, resources, etc. It works / runs the necessary real when workflow and initiates communication with the 3 party systems, that it has been configured to Orchestrate. The 3rd party communication is facilitated through plug-ins such as vCenter, vRealize Automation, PowerShell, AD, Infoblox, F5, HTTP-REST, SOAP, etc...

    The 'Client' is your developer interface that allows to build and run the workflow manually. As noted by Christophe, the workflow you've built (or have been provided in the vast library of content that comes with the server) may be performed via the API REST Orchestrator.

    Consider your e-mail:

    Your 'Customer' e-mail address allows you to create/read/send emails to/from a mail SERVER.

    A mail server does the work of send/receive emails for your domain.

  • Sending events to a Syslog server Orchestrator

    I would like to send information orchestrator Server Syslog or SIEM solution.  Is there a configuration in a workflow or the Linux OS itself to allow this?

    You can configure linux to do this:

    http://www.vcoportal.de/2011/12/redirecting-vco-logs-to-syslog/ and How to manage vCenter Orchestrator newspapers?

    If you use vRO 6, I think it is even configurable using the new https://your vvco:8281 - Control Center / Control-Centre (connection with the root of the device user)

    Joerg

  • In vRA6.2.1 default vRO casts cannot connect to the server Orchestrator

    VRA 6.2.1 installed and configured successfully.

    VCenter added Endpoint

    Tested create workflows of catalog data center and it works very well

    Imported from my plugin for orchectrator

    Tested a workflow and throws are unable to retrieve, etc...

    VRA rebooted device

    By default orchestrator test connection failed.

    Selected option orchestrator external and provided same vRA incorporated vRO credential

    Test connection successful - don't know why it failed when I choose default orchestrator

    Now tested my workflow plugin and it works great.

    Later, I chose the default orchestrator still test connection fails - any reason?

    (1) "default orchestrator" doesn't really mean "the on-board Orchestrator. It means "the orchestrator server configured in the system by the system administrator.

    We can consult, by connecting w / system_admin and see what is there. If there is a mismatch - repair

    (2) if (1) is not an issue, then connect with the root user in the vRA WILL and run the following command "vcac-vami vco-service-reconfigure.

  • the host performance, no update values not returned to the orchestrator script...

    Hope someone can tell what I'm doing wrong.

    I'm still on 5.5 and trying to get the load data for ESXi hosts (via connected to the orchestrator Server vcenter) to decide on which host is the best target for vmotion-action.

    As I could not find any workflow builtin or efforts to get data to load, I tried to dig myself via a script.

    • find all hosts
    • for each reading of the host.summary.quickStats.overallCpuUsage host

    I have values, but they are static and do not get updated.

    If I use perl-sdk and perform the same actions to vcenter I get updated for each esxi host values.

    Browse objects via the web on the server vcenter watch also updated these values.

    If only my orchestrator workflow seems to be wrong.

    I do not suspect that the workflow in orchestrator performs a query only the inventory and not the living objects. It is much faster than doing the same thing with perl-sdk.

    My little script (which could be run in a single Scriptable task with no impression one journal entry/exit). Problem can be seen by newspaper printing. Total used MHz does not change in my environment.

    --------------------------------CUT

    var host = System.getModule("com.vmware.library.vc.host").getAllHostSystems ();

    var tothz = 0;

    for {(i in hosts)

    var cpu_used =. summary.quickStats.overallCpuUsage of hosts [i];

    tothz = tothz + cpu_used;

    }


    System.log ("tothz:"+ tothz ");

    --------------------------------CUT

    Q1: I am doing something stupid in my script?

    Q2: I have to do some extra steps to get the updated values?

    Q3: Is there a better way to find/load-performance data for ESXi hosts?

    Stupid enough to write the sollution myself

    It is possible to force an update of the inventory values for objects that are important to your script/workflow.

    It can be done by the following function in a script.

    VcPlugin.refreshObjects (object-to-update - in - stock)

    So for my specific problem, I could solve it with a single additional line.

    --------------------------------CUT

    var host = System.getModule("com.vmware.library.vc.host").getAllHostSystems ();

    var tothz = 0;

    for {(i in hosts)

    VcPlugin.refreshObjects (the hosts [i]) / *.< my="" new="" line="">

    var cpu_used =. summary.quickStats.overallCpuUsage of hosts [i];

    tothz = tothz + cpu_used;

    }

    System.log ("tothz:"+ tothz ");

    --------------------------------CUT

    This seems to force an update of the inventory values before I use them.

    It will certainly slow down my script a little, but it's part of the game.

  • OfficeJet 6700 Premium: Unable to connect to the server

    I used my 6700 for almost a year and a half to work on a secure server of company where I couldn't use many features. I recently brought home, and now I use it on my personal network of houses. I followed the instructions on reprint the code of request but were unsuccessful. I constantly get a message that my printer is unable to conect to the server. My network wireless printing has been set up and I was able to print from my phone, laptop, & office. Can someone help me please my claim code?

    Hey @bhigh904,

    Welcome to the Forum from HP Support.

    I see that you are unable to activate the services Web on your HP Officejet 6700 Premium e-all-in-one printer. I would like to help.

    When users encounter this type of problem, I usually suggest from scratch with the radio of the printer and webservices configuration.  You can clear all of these parameters in a swoop by the factory default restore * your printer.

    Here's how:

    * Note that this step resets the setting up your printer wireless, address ePrint and other custom print settings. If you have created a custom address @hpeprint.com it is permanently erased. For more information about custom addresses ePrint, click here.

    • The printer's front panel, press the Setup/key icon and then tap tools
    • Select Restore to factory settings

    Then, touch the wireless icon () and run the Wireless Setup Wizard to restore your network connection.

    Make a note of the IP address of the printer.  Then, follow these steps to configure a manual DNS:

    • Enter the printer's IP address in a web browser (Chrome, Firefox, Safari, Internet Explorer) and press ENTER to go directly to this page.
    • Click the network tab.
    • In the submenu on the left, click Networking.
    • Then click on the network (IP) address.
    • Click Manual DNS server.
    • DNS preferred as 8.8.8.8 manual entry
    • Auxiliary DNS server entry as 8.8.4.4
    • Click on apply to finalize this change.

    Then, press the icon of Webservices () and reactivate your webservices (necessary for scan to e-mail, ePrint and other features).

    Please let me know the result of your troubleshooting by responding to this post.  If I helped you to solve the problem and that you liked this post, feel free to give me virtual accessories by clicking on the 'Thumbs Up' icon below and by accepting this solution.

    Thanks for posting in the Forum from HP Support. Have a great day!

  • Where "codes" to re - connect to Outlook Express entry

    After cleaning the laptop by an Outlook Express store without server/entry/exit codes (I have them but can't find screen to enter).

    You ask about the POP and SMTP settings? You must obtain from your e-mail server. If you tell us who it is, we can know the parameters.

  • HP Envy 5535: scanner cannot connect to server want 5535

    I have a MAC / Windows and the scanner will analyze more than all. The error message is unable to connect to the server. I have reset the printer / scanner to factory default and reset everything and still not able to scan what it is only printing works wireless.

    What is next steps for scanning back?

    Thank you!

    Yes

    Hey @Dodgrboy,

    Welcome to the Forum from HP Support.

    I see that you are unable to scan with your HP ENVY 5535 e-all-in-one printer. I would like to help.

    I recommend you try the following:

    1. Uninstall the printer - click here for instructions.
    2. Fix permissions of the disc on your Mac - click here for instructions.
    3. Once you have finished running the utility above, restart your computer.
    4. Finally, click here to reinstall your printer.

    If your question is scanning to email try this troubleshooting flow:

    When users encounter this type of problem in general, I suggest from scratch with wireless printer, webservices and scan to e-mail setup.  You can clear all of these parameters in a swoop by the factory default restore * your printer.

    Here's how:

    * Note that this step resets the setting up your printer wireless, address ePrint and other custom print settings. If you have created a custom address @hpeprint.com it is permanently erased. For more information about custom addresses ePrint, click here.

    • The printer's front panel, press the Setup/key icon and then tap tools
    • Select Restore to factory settings

    Then, touch the wireless icon () and run the Wireless Setup Wizard to restore your network connection.

    Make a note of the IP address of the printer.  Then, follow these steps to configure a manual DNS:

    • Enter the printer's IP address in a web browser (Chrome, Firefox, Safari, Internet Explorer) and press ENTER to go directly to this page.
    • Click the network tab.
    • In the submenu on the left, click Networking.
    • Then click on the network (IP) address.
    • Click Manual DNS server.
    • DNS preferred as 8.8.8.8 manual entry
    • Auxiliary DNS server entry as 8.8.4.4
    • Click on apply to finalize this change.

    Then, press the icon of Webservices () and reactivate your webservices (necessary for scan to e-mail, ePrint and other features).

    Then, tap the scan icon and enter the e-mail address you want to scan to.  Then, recover the PIN than you should automatically receive and complete your scan to contact the installer.  Ideally, if you are able to get this good service will be fully functional.

    Please let me know the result of your troubleshooting by responding to this post. If I helped you to solve the problem, feel free to give me a virtual h.o.t. by clicking the "Thumbs Up" icon below and by clicking to accept this solution.

    Thanks for posting in the Forum from HP Support. Have a great day!

Maybe you are looking for

  • WLAN Access Denied for active MAC address in the ACL

    I have a pretty great list ACL (Access Control) and I've never had a problem with it in the past, but I just got a new laptop and same computer when I save the MAC address and reboot the router I always get the "WLAN Access Denied" error for access f

  • Cannot play videos on Web site

    Original title: video streaming site Web will not play for more than 3 seconds with any browser I try and use.everything else on the page works normally I have the latest version of flash player and video card drivers.the more recent same problem hap

  • How to choose a color for my emails "sent"?

    I would like to choose a color for the emails that I send and I can't find a way to do this, please notify

  • No audio output is installed in Toshiba Portege M600, for several times! Help, please...

    HII, I have the Toshiba Portege M600 with Vista Home Premium 32-bit SP.1. It is about 3 years old now. This for 3 months, I experience "no audio output device is installed" repeatedly. The first three times that I feel it, it's solve by doing:-Run->

  • Analysis of photo with 12 CPS issue remotely

    We use the remote scan to capture the picture of the patient in our table of EMR. The process is taking the picture, crop and save it in the table. But for some reason, anyone is photo take us, after the harvest, the picture changes to another photo