Garmin does not connect after upgrade 9.3.2

I have a Garmin Frontrunner 235, which connects to my iPhone (5 s) via Bluetooth.  It all worked perfectly until I upgraded my 5s to iOS 9.3.2 recently.  Now the phone sometimes cannot 'see' the favourite, and even when he can, he refuses to connect.  I noticed that Garmin has released a new version of Garmin Connect, but that does not solve the problem.  This becomes a real pain.  Is there a solution that everyone knows without having to down-level to iOS 9.2?


Downgrading iOS is not supported.

If you go to settings > Bluetooth, tap the "i" next to the Garmin device and tap "Forget this device" and then re-pair, it works then?

Tags: iPhone

Similar Questions

  • USB modem broadband does not connect after upgrade to XP Pro

    I use a high modem flow Cricket to connect to the internet, but lost the connection from the upgrade of XP Home, XP Pro. I have a Compaq nx6310. Recently upgraded to Windows XP Professional (ver 5.1, service pack 3) The Cricket Modem plugs into the usb port. Now, I get the error message "a connection to the remote computer could not be established. You may need to change the network settings for this connection. "Received error 720: PPP settings on my computer and on the remote computer do not match. (see screenshot below)

    Firewall is configured correctly to allow the modem in Windows Firewall and my anti-virus program.

    I have determined that it is not the modem because it works correctly on the borrowed laptop.

    I spent several hours on the phone with the internet provider and it was determined that the modem is working properly according to the diagnosis, they talked me through as well. It was at this time tech ISP suggested that I have to contact HP.

    Any comments would be greatly appreciated. Thank you in advance for any ideas or suggestions.

    Problem solved after hours even over the phone with Cricket.

  • vCenter does not connect after upgrade to 2.0

    I just upgraded to version 2.0 GA and after that it's over I had a message on it is not not able to connect to one of my vCenter servers.  It worked before the upgrade.

    When I try and test the connection I get the following error: transport HTTP error: certificate is not consistent with the constraints of the algorithm

    I restarted vCenter services without a change in behavior.  vCenter version is 5.0 Update 2

    The problem has been resolved.  It is thanks to our vCenter server with a 512-bit SSL on it (was a previous update to 4.0).

    Java's LogInsight 2.0 security settings need to be at least 1024-bit SSL.  As a temporary work around support changed settings only need a 512-bit key.  It needed a reboot of the Insight journal.

    I'm fine with this fix since we planned to deploy a new server vCenter in the coming months.

  • Xbox 360 Windows Media Center Extender does not connect after upgrade to Windows 7

    Xbox 360 Extender worked fine on Vista Home Premium (32 bit). After the upgrade Windows 7 Home Premium (32 bit) on-site, when I turn on Xbox and the attempt to connect to Windows Media Center, you get an error saying unable to connect.

    Back on the Windows 7 PC, I see the mcx1 file it under the users folder. But when I got to the tools, it says no set Extender in place.

    Someone at - it suggestions on how to change settings in Windows 7 while the Xbox can connect?

    Just in case someone encounters this problem, here is what I did:

    1. reboot the Xbox until Windows Media Center connects.
    2. back to the PC. Start Windows Media Center.
    3. go into tasks > settings > Extender
    4. Select Xbox 360 Media Center, then delete.
    5 PC removes the old mcx1 folder used to use with Vista.
    6. start the Xbox, go to Windows Media Center
    7 write down the code on Xbox's 8-digit ' display
    8. on the PC, you will be prompted to set up the Xbox extender
    9 follow the instructions to enter 8 digit code
    10. new file will be created, mcx1-PCNAME.

    You're all set on 7.

  • Functional Setup Manager does not connect after upgrade to OLIVIER Olivier


    I've updated OBIA installed on OBIEE to OLIVIER

    All links works very well except the OBIA functional Setup Manager Wizard

    Login page appears correctly, however after you have entered the user name and password for the functional Installation Manager, nothing happens.


    Take a look on the underside of docs of Oracle.

    OLIVIER - INST - 08067 ATG repository version is older than the minimum required version repository (Doc ID 1677306.1)

    Thank you

    ~ KKT ~.

  • HP Laserjet 2100 does not work after upgrade Windows 10

    HP Laserjet 2100 does not work after upgrade to Windows 10. Tried using PCL 5, PCL 6 and also tried the HP Universal print driver. I agree, this is an old printer, but I am disappointed told me "the printer is in error" when I try to print after this upgrade. Worked fine on Windows 7...

    Thank you!

    If the printer is connected using a parallel printer cable, please see the link below for the solution.

  • Projector does not work after upgrade from Sierra

    My projector does not work after upgrade to Sierra. Or search in Outlook (I use outlook for Mac due to having MS 365 for labour) or the search function in the finder. I use this all the time and need this feature back. I tried to reindex spotlight and nothing. Anyone has any ideas.

    Try to rebuild Spotlight rebuild the Spotlight to your Mac - Apple Support index

  • FF does not start after upgrading to version 27.0.1

    FF does not start after upgrading to version 27.0.1
    Crash ID: bp-2bc18734-d643-4843-a10f-fd6102140214

    Firefox 27.0.1 is too recent for me to know what unique issues it may have. I will message you a link to download the installer for Firefox 27.0 to see that the inversion or not the problem.

  • Re: NB200-134 - touch FN does not work after upgrade to Windows 7 Ultimate

    My NB200-134 of FN keys does not work after upgrade from Windows 7 starter to Windows 7 ultimate. I tried to install all the drivers found on the Web from Toshiba website for my lappy but it still does not work.

    Help please

    Hi asalamk,

    The FN keys are controlled by value added and Flash Cards Support utility package. I think you forgot to install these tools

    You should recheck the Toshiba page and download these two tools. Start with the installation of the package of added value, and then restart your laptop. After this utility installation of Support Flash Cards. Reboot once again and all the FN buttons should now work correctly.

  • Satellite A300D-15B - Webcam does not work after upgrade to Windows 7

    My webcam does not work after upgrade to Windows 7. I installed the drivers but still having no luck

    Hey Buddy,

    What does it mean exactly when you say he won t work?
    You get an error message or only a black image? What model of laptop you have and that you use the Toshiba Windows 7 upgrade kit or a disc of Microsoft?

    At this moment I can only offers to install latest driver of the webcam of the official website of Toshiba. Make sure that this driver is released for Windows 7 and not Vista.

  • Microphone does not work after upgrade from Vista Home Premium to Win 7 Home Basic-Sony Vaio VGN-NS25G

    Microphone does not work after upgrade from Vista Home Premium to win 7 Home Basic Edition. Laptop model Sony Vaio VGN-NS25G, bought in India

    My built-in mic not working anymore after the upgrade from Vista Home Premium to win 7 Home Basic Edition. Model laptop Sony Vaio VGN-NS25G was bought in India. I have taken the loacl Sony Service Center and they said that Windows 7 drivers for the microphone Sony was not yet available. They mentioned that the only way to fix the problem was to upgrade to Vista. Is this true? Where can I get these drivers for the microphone, and they are not available, when will they be available?


    Method 1.
    Interestingly, I found the drivers for Windows 7 for this particular model of Vaio. Here is link thye:

    I suggest updating all your drivers from the link above and drivers Realtek especially.

    Method 2. Set the default Microphone.

    Once the drivers installed to check if the microphone is the default value, here's how:

    Exercise the functions mentioned below to adjust the Microphone as default:
    1. Click Start and click on Control Panel.
    2. click on sound, then a new window will open.
    3. in the new windows, click on the 'Registration' tab and right click in the window and click Show disabled devices.
    4. now check if the Microphone is listed there and right-click on it and choose activate.
    5. turn highlighted that Microphone and click "set as default".
    For more information see the articles below: ' t-work correctly

    I hope this helps.

    Thank you, and in what concerns:
    Shekhar S - Microsoft technical support.

    Visit our Microsoft answers feedback Forum and let us know what you think.
    If this post can help solve your problem, please click the 'Mark as answer' or 'Useful' at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

  • VMware Player 6 VM - bridged network (Ethernet/LAN) adapter does not work after upgrade to Windows 10 - known issue?


    I upgraded the PC host, but also virtual machines to Windows Pro 10.

    TheVMware Player 6 VM - bridged network (Ethernet/LAN) adapter does not work after upgrade to Windows 10...

    Is this a known issue?

    Thank you!

    Kind regards



    I uninstalled VMware Player, including the abolition of the configuration files.

    re-installed VMware Player and it worked!

  • Venue 11 7140 pro micro HDMI does not work after upgrade windows 10

    Has anyone tried connect a HDMI microphone on their place of dell 11 7140 pro after windows 10 upgrade? Mine does not work after the upgrade, but the HDMI from the dock works.

    I have thus display driver problems on 10 to win.

    For me, the micro HDMI port works fine. I use an active adapter, so that could make a difference.

    The HDMI on the dock works well, but only if I directly connect to an HDMI display. If I try to use a passive DVI adapter, then the external screen is not recognized. In addition, the DisplayPort on the wharf is also unnecessary, regardless of the type of cable or attached monitor.

    I encounter this problem after performing a new installation of Win 10, using the brand Dell drivers and latest drivers Intel installed by Windows update.

    It is certainly a driver problem Win 10 because everything works fine if I boot the Tablet under Linux using a USB key.

  • Re: Satellite L300 - camera does not work after upgrade to Win7

    As in the subject. Camera does not work after the upgrade to Windows 7. I have tried almost everything found on the Internet. The drivers are installed.

    There is no exclamation point in the system.

    Satellite L300 (PSLB8E)


    What happens when you start the webcam app?
    All programs-> Toshiba-> webcam

    Did you install other 3rd software part as for example the Skype that could access the webcam?

    Extra tip: go to BIOS and set it to default, save changes, and then restart the laptop.
    Start Skype for example, check the settings in Skype webcam chose correctly.

    It would be really interesting to know if the other software would be able to use the webcam.

    By the way: have you installed Toshiba face recognition? This software use and access the webcam as well
    Then sometimes it would be possible that this software could block the webcam and webcam tool could not work

  • Satellite P200 - 10 c: camera does not work after upgrade to Vista ultimate

    After the full vista upgrade webcam did not work. After some research, I found that I had to change the driver for usb video camera I did.

    Everything works fine now except the snap button of the camera software. Record audio and video works fine. Snapshot button does not work after you have clicked on it. Can someone help me solve this problem too.


    you have reinstalled the software of the camera (not only the drivers) that controls the special features snapshot-thing like that?

    It should contribute to reinstall everything because vista is confusing every driver/software maximally... :)
    Would appreciate comments on your success.

    See you soon

Maybe you are looking for

  • Problem with Hello.

    Sometimes, when I tried to initiate or participate in a conversation, light of my integrated webcam has happened; but no image of me or others appeared. At other times, the light of the webcam has not turned on; No image of me or others appeared. Sam

  • Equium A100 - CD is no longer burning but still burn DVD

    Hello all you have a problem with my laptop recently I tried to burn a cd and in any program I use says something wrong with the disc etc and burn a little and displays the status bar.But I can still burn DVD so I am confused help much appreciated. I

  • WNDR 4300 loses 2.4 GHz Radio daily

    I bought a router of 4300 in November 2013. Shortly after the purchase I had to reboot the router on a daily basis to maintain the wireless operation. Technical support provided a new update of the firmware which solved the problem. Fast forward to D

  • Headphones Sennheiser / Volume (help?)

    Hi people, I bought a set of Sennheiser phones/mic on Amazon recently for use with my Dell Inspiron 3737 on Skype, You Tube, etc. I'm not quite sure here, but in m

  • Cannot share a folder

    I'm trying to share files between the system and the system B.  The two systems appear on the other. and the system can access files on system B.  However, System B cannot access anything on the system.  When I go into advanced features of sharing on