Garmin Vector pedals USB ANT + in LabVIEW

Similar Questions

• Mcc usb 1208FS for labview 10.0 connection problems

  I have version 10.0 of Labview installed on windows XP computer. I want to connect MCC USB 1208FS for Labview. Not able to see the device MCC in device of measurement and Automation Explorer interface. It appears? Please let me know the steps to access the device of the MCC in Labview.

  I can see the MCC card detected in the software InstalCal of MCC supported. I installed the latest version of the CMC the CMC site software.

  As far as I know, you will not be able to see physical computer as in MAX.

  From the file of help from MAX: "Measurement & Automation explore (MAX) allows to access your National
  Instruments of devices and systems. "that is material MCC is not a feature of National Instruments.

  Why not stick with the InstaCal software and the MCC screws provided?

  Ian

• Get incremental counter/sound to work along side with action with usb-6008 with labview tia sal22

  Get incremental counter/sound to work along the coast with usb-6008 with labview tia sal22

  Hi all

  I can get this vi to work if they are distinct from the vi but I can't join them together

  Example of my error:

  If buffers are set to 0 the freq counter increment works, but no sound
  If the buffers are set to 1 the audio works fine but is not increment the Freq counter
  If the buffers are attached to more 1 clicks and pops are coming

  That's what I'm doing:
  (1) have the frequency of increment of my internal sound card to a certain level as .01hz a second until he gets to 20 000 hz

  (2) use my device usb-6008 daq, which is connected to the same machine to measure the voltage at the same time. (I am in a position very low voltages between 1-5volts)

  (3) output to a worksheet text file which will show you:

  time in seconds, frequency, voltage
  0,400.01,2

  1,400.02,2.5

  2,400.03,1

  I'm a bit confused about how connect the increment and the audio during the measurements with the usb-6008 housing on the same machine
  at the same time and in the same VI.

  Anyone have any ideas?  I'm using labview 8.5
  TIA sal22

  Ha ha you have been deceived by a dynamic thread. Insert a convert from Dynamic Data Express VI (Palette to own: Signal handling screw Express) between the daq read and build the array function. Then it won't work. Now the value in the dynamic data is only converted to a numeric value

• Programming USB stick using LabVIEW

  Hi, I want to read the names of files in the USB that I inserted into my usb port using LABVIEW. Can someone tell me how to write a program VI for that? Thank you!

  Just use the file from the list (or recursive list of files). No different than a list of files of any other player.

• How to access any USB device in LabVIEW?

  I have Labview 8.5.It has a few blocks to directly control the port series, but I don't see ANYTHING to let me control devices connected to the USB ports. When you use the functions VISA the USB port is not available in the control of VISA Resource Name list. I have a device with a USB port. I would like to transfer data to and from the device via USB using LabVIEW.Does anyone has any suggestions for how I can access the USB port in a way that will allow LabVIEW communicate directly with the device connected to the USB port?

  Hello

  Looking on the USB communication with labview?

  You must first configure your VISA to recognize the USB

  http://zone.NI.com/DevZone/CDA/tut/p/ID/4478

  Here is a starting point...

• With the help of USB-6009 with LabView 8.0

  I try to use a USB-6009 with LabView 8.0 box.  I DAQmx 8.8 (that came with the unit) installed and verified that the 6009 works correctly through MAX I also read on this site that the 6009 is compatible with LabView 7 or more.  However, I am unable to get LabView to recognize the device.  Using LabView, to use a DAQ hardware I have to select "Input" in the palette 'Functions'  But there is no range "Input".  Actually I can't find the DAQ Assistant Express VI anywhere.

  Do I need to use a different version of the DAQmx?  If so, which and where can I find it?

  Thank you.

  LabVIEW 8.0 is not supported with DAQmx 8.8. I think that the last version with support for 8.0 is DAQmx 8.6.1. You can uninstall 8.8 and install 8.6.1. You should really consider upgrading your version of LabVIEW. NOR has decided to limit support for 7.1 8.0 just now. The latest version of DAQmx manages to only 8.2.x and higher.

• Is it possible to operate the USB TC-01 Labview 7.0 Express?

  I have the device of thermocouple USB TC-01. I installed DAQmx 9 and is recorded in «Devices and Interfaces» However, the sample code provided is written in Labview 8.1 and I'm under 7.0Express - is it possible to run in 7.0 (I can't find a vi to interface with it)? If so, someone has the code example and/or can convert the code example to 7.0? Thanks in advance

  Paul

  The latest version of DAQmx for LabVIEW 7.0 is the version 8.1. The Readme for 9.0 also claims that the 7.0 is not supported.

  Good reason to finally make a long delay LabVIEW upgrade.

• Improve the resolution of Image of USB camera in LabVIEW

  Hello:

  I am currently working on taking images in LabVIEW using a Logitech HD Pro Webcam C910 USB camera. I have attached the simple VI that I use. For some reason, LabVIEW is no longer able to take a picture of resolution 640 x 480 with this device. However, its capabilities are well beyond that. According to me, it can reach a resolution of image fixed of 1920 x 1080. How can I get LabVIEW to snap a picture at 1920 x 1080 with this device? I have attached a jpg of the VI.

  Thank you in advance,

  Brad

  Brad,

  IMAQdx functions will not displayed either because you have not installed IMAQdx or they are not allowed. Both come on the setup of the Acquisition of the Vision, but are separate elements that can be enabled/disabled during installation. If you use the Vision Development Module, you should have a license to activate the IMAQdx as well. Check with the License Manager AND verify that it is authorized.

  You'll really like using IMAQdx much better than IMAQ USB functions. There are many more features supported and it is fully supported in all software OR, as measurement and Automation Explorer. You can configure your camera inside MAX settings and then save and use them in LabVIEW automatically.

  Eric

• driver for usb-6221 XP LAbview 6.0.2

  I'm trying to connect the usb-6221 to an old laptop with XP and Labview 6.0.2. I said that's not possible with NOR-DAQmx. This old version of Labview does not NOR-DAQmx, there NEITHER-DAQ 6.8 installed. Reading me for it suggests works with USB, but I can't find the USB drivers in installation.

  Based on the response to your message here, the only USB devices supported in NOR-DAQ 6.8 are old appliances DAQPad E Series USB such as the NI DAQPad-6015 or DAQPad-6016.  All material of the M series, including variants of the USB, are no longer supported in NOR-DAQmx.

• NOR-DAQmx 9.2.2 for 6251 USB works for labview 8.2?

  Driver download OR-DAQmx 9.2.2 USB 6251 work for labview 8.2?

  Thanks in advance

  NOR-DAQmx 9.1.1 was the last version to officially support LabVIEW 8.2

  NIquist: I'm a student as to why this KB seems to have disappeared in the air.  I can see inside, but not outside.  I'll update the post you linked when I tell me what's wrong.

• How can I navigate and play MP3 files from a USB stick using Labview 8.0?

  I am a tester to test the USB flash drives connected to the PC.

  I want to browse the file system & playback of audio files, files .jpeg etc in the USB. I have Labview 8.0. When I searched for some examples or screws which can detect the flash drive USB, cannot find a. So if you could point me in the right direction, I can find a solution to my problem.

  Thank you.

  You will probably find some specific examples for this.  A USB flash drive is mounted by the operating system and appears as a new memory storage device to all software on the PC, including LabVIEW.  You can certainly write a LabVIEW program to open the files on the key and the game/run their but I would create a VI who wrote the files on the stick then proofread and checked to find errors at the level of the ILO.  Don't forget that your operating system could do parity check under the hood that would make your test rather meaningless.

  BTW, memory test looking at pictures or listen to the MP3s would be useless of course.  A man cannot see or hear errors at the level of the ILO in a stream broadband.

• USB-6001 and LabVIEW 6.1

  I'm working on a project with LabVIEW 6.1.

  They just bought a NI USB-6001.

  I installed the driver NOR-DAQmx 9.9 and the device comes in OR-MAX and I am able to use the Test panels to read and put pins.

  In LabVIEW 6.1, the device does not appear.

  What should I do to be able to program this device with LabVIEW 6.1?

  You need tasks in order to use the DAQmx Read and Write DAQmx.  You can create tasks in MAX or do it programmatically with the available in the palette DAQmx screws.

• Trouble with USB-6501 with Labview 8.6 Pro for Mac OS

  Hello

  I have a unit USB-6501 I try to use with Labview 8.6 for Mac Pro to processor intel.

  I have the driver NOR-DAQmx base 3.2 for Mac installed and when I ran "Isdaq", it detects the device and also warned that the firmware needs to be updated. So, I ran the "FWUpdate" for updating the firmware. I double check the Isdaq and it detects the device as "NI USB-6501:"Dev1"(USB0::0x3923:0x718A:014386 B 0: RAW).

  Now, when I run Labview 8.6 and DAQmx Base create channel VI and the port of 'physical' wire to the control, nothing appears in the available device.

  Also, when I run the mxbaseconfig program, not the existing basic tasks detect the device.

  Could someone please help me get this to work? Basically, I need to read and write slow digital data through USB-6501. But, the Labview does not detect the device.

  Thank you

  Keong,

  I do not know what causes this, but place a task create VI before your code and the wire of the output task to the task of entering the chain and try to run that.  Please let me know if it works for you.

• Not able to remove the USB stick while Labview is open

  For all the gurus.

  I'm using LabView 8.5 and made an Application that requires the user to download the data of the disc/USB. Then, when VI works user invited to select a. TXT from USB to download file. Here, the entire operation ends as desired. Only ONE PROBLEM I am facing is when download completed attempts to the user to 'remove the USB' where gives windows a warning saying USB is in use and cannot be deleted.

  This particular VI I use function of file dialog box to browse USB and let the user select a file. I even tried to use the function to open the file, but it gives same error.

  The only way I can pull out USB after the download is out of Labview which is not feasible for my application.

  is this a Bug in 8.5 or is there a different way to do it?

  Any help will be appreciated.

  Concerning

  You can call the Windows API SetCurrentDirectory function (see attachment), but if you follow the link you will see it warns about its use in multithreaded applications. I have no experience with it, so I can't comment.

• Implement the Std::Vector < < Point2i > > Std::Vector in dll wrapper for LabVIEW

  Hi, I'm writing a wrapper dll that using OpenCV function. I had been sucessfully implement Std::Vector by referring to "An array of clusters to a dll C sending".

  And now, I want to implement the Std::Vector<>> who is a lot like table 2D but each line items may be different.

  In LabVIEW, I attribute a range of cluster of the dashboard cluster of 2 I32 elements, structure which is shown below:

  

  I think it has the same functionality as Std::Vector<>> in C++.

  So I plug this data on the "Call library function node" structure and generate C code that indicated below:

  /* Call Library source file */
  
  #include "extcode.h"
  
  /* lv_prolog.h and lv_epilog.h set up the correct alignment for LabVIEW data. */
  #include "lv_prolog.h"
  
  /* Typedefs */
  
  typedef struct {
      int32_t elt1;
      int32_t elt2;
      } TD4;
  
  typedef struct {
      int32_t dimSize;
      TD4 elt[1];
      } TD3;
  typedef TD3 **TD3Hdl;
  
  typedef struct {
      TD3Hdl elt1;
      } TD2;
  
  typedef struct {
      int32_t dimSize;
      TD2 elt[1];
      } TD1;
  typedef TD1 **TD1Hdl;
  
  #include "lv_epilog.h"
  
  void funcName(TD1Hdl arg1);
  
  void funcName(TD1Hdl arg1)
  {
  
      /* Insert code here */
  
  }
  

  Then, I write this code show below in dll wrapper:

  void funcName(TD1Hdl Blobs)
  {
      vector < vector > blobs;
  
      // Distribute contents of blobs to Blobs from LabVIEW
      MgErr err = mgNoErr;
      size_t arraySizeInBytes = Offset(TD1, elt1) + sizeof(TD2)*blobs.size();     // Determine row size
      err = DSSetHSzClr(Blobs, arraySizeInBytes);
  
      if (err != mgNoErr)
          return;
  
      (*Blobs)->dimSize = blobs.size();
  
      for (size_t i = 0; i < blobs.size(); i++) {
          arraySizeInBytes = Offset(TD3, elt) + sizeof(TD4)*blobs[i].size();  // Determine col size of each row
          err = DSSetHSzClr((*Blobs)->elt[i].elt1, arraySizeInBytes);
  
          if (err != mgNoErr)
              return;
  
                  /*......................*/
          }
  }
  

  When I call LabVIEW dll, the program get interuption(i.e shutdown) on line where I want to determine the size of each row.

  Could someone give me some suggestions on this subject or promote another application of this requirement?
  Thank you very much.

  MgErr funcName(TD1Hdl Blobs)
  {
      vector < vector > blobs;
  
          Labeling(image_binary, blobs);         // the prototype of this function is: Labeling(Mat &binary, Vector> &blobs)
  
      // Distribute contents of blobs to Blobs from LabVIEW
      MgErr err = mgNoErr;
      size_t arraySizeInBytes = Offset(TD1, elt) + sizeof(TD2)*blobs.size();      // Determine row size
  
          if (contours == NULL)        {                Blobs = (TD1Hdl)DSNewHClr(arraySizeInBytes);                if (Blobs == NULL)                         err = mFullErr;        }        else                err = DSSetHSzClr(Blobs, arraySizeInBytes);
          if (err != mgNoErr)                return err;    for (size_t i = 0; err == mgNoEerr && i < blobs.size(); i++) {
          arraySizeInBytes = Offset(TD3, elt) + sizeof(TD4)*blobs[i].size();  // Determine col size of each row
  
                  if ((*Blobs)->elt[i].elt1 == NULL)                {                        (*Blobs)->elt[i].elt1 = (TD3Hdl)DSNewHClr(arraySizeInBytes);                        if ((*Blobs)->elt[i].elt1 == NULL)                                    err = mFullErr;                }                else               err = DSSetHSzClr((*Blobs)->elt[i].elt1, arraySizeInBytes);
                  if (err == mgNoErr)                {                        (*((*Blobs)->elt[i].elt1))->dimSize = blobs[i].size();
  
                          /*......................*/
  
                  }
          }
          (*Blobs)->dimSize = i;        return err;}
  

  Personaally I've usually done like this. Already, the tar of DSSetHSzClr() indicates if there was something wrong and that the handle cannot really become NULL to call this function.

  To be entirely correct and safety integrated, you must do more than that. But as long as you assume that the incoming picture is always smaller that the outgoing Board will be (usually it be 0 items when you enter this function, but if you reuse sort table in the diagram, by storing it in a registry change for example, this may not be true more) this will be enough.