Gateway TS-Intermidiate file requirements

Similar Questions

• II Gateway and TS-Intermidiate file requirements

  Hello

  I asked in this thread on the TestStand Intermidiate file.

  http://forums.NI.com/T5/NI-TestStand/requirements-gateway-TS-Intermidiate-file/m-p/2288998/highlight...

  At the time I write my own Tango intermediate file generator. To make it simple as possible, that I tried to draw the OR s her. I couldn't explain one of the attributes is: "canGenerateResults" in the step element tag.

  Is it possible to tell me how this value of the indicator is created?

  Concerning

  Jürgen

  Hi Daniel,.

  what you have is the attribute: recordResult.
  but the word 'sequence' reported the flag at right.
  Attribute: canGenerateResults ist created by.
  Sequnence properties-> tab: general-> the box off the result recoding for all stages.

  Concerning

  Jürgen

• The index.xml file required is missing. Cannot open documents. 10.10.5 sys

  The index.xml file required is missing. Cannot open documents. 10.10.5 sys

  You have two versions of installed Pages, where the Pages ' 09 document format use it internal document index.xml, and all Pages v5 releases use a different document format that does not incorporate the index.xml file. If you have Pages ' 09 running without window, and double-click a v5 document Pages, you will get a Pages ' 09 dialog box indicating that the index.xml file is missing.

  Exit Pages ' 09 and then double click on the document to open correctly in your version of v5 Pages.

• Can not build an installer, because it seems to have deleted the files required

  LabVIEW does not locate the Installer source of a component necessary to build this installer. LabVIEW finally found the missing element in the following distribution:

  The distribution name: NOR-DAQmx 8.6, disc 1
  Last known installation path: C:\National Instruments Downloads\NI-DAQmx\8.6\NIDAQ860-1

  Search source for NOR-DAQmx 8.6, disc 1 Setup and build your installer again.

  Visit ni.com/ask support request page to learn more about the resolution of this problem. Use the following as a reference:

  CDK_Build_Invoke.VI.ProxyCaller > CDK_Build_Invoke.vi > CDK_Engine_Main.vi > CDK_Engine_Build.vi > CDK_Engine_PromptForMissingDist.vi

  Loading information of product deployment
  Loading information of product deployment
  Adding files to install
  Makes adding files
  Preparing to build the deployment
  Copy of the products of distributions
  Copy distribution "OR-DAQmx 8.6, disc 2" of: C:\National Instruments Downloads\NI-DAQmx\8.6\NIDAQ860-2\ to: C:\LabVIEW\DAQ\Pentium4_Loggers\builds\Installers\Data worm 23a\ P4 Logger ".
  Deployment of the completed building

  I think I must have deleted the files required from my C drive.

  (Updated)

  This is now fixed.

  I managed to resolve this, by a combination of download OR-DAQmx 8.6.1 from the Web site of NOR and NOR-DAQmx 8.8 disc installation.

  

• After doing a HP-assisted recovery, when I click on Windows Update, I get a message saying "files required to use Windows Update are longer registered or installed on your computer.

  I am unable to open Windows Update Express option, when you click on Express, I get a message saying that "files required to use windows update are longer registered or installed on your computer." I tried both options following the message, with no luck at all. Belarc says that the 125 Microsoft updates are missing. I have Windows XP Home Edition sp2 disk. Suggestions, please.

  If xp is always saved, then try to open the internet options settings,

  view of objects, search for & R.click on the WU & MU active x objects

  (one at a time), select "update", they are part of windows update

  Active x, necessary for updates... Express update could be among them

  Moreover, however it is not a part of windows...

• Error message "Files required to use Windows Update are longer registered or installed on your computer."

  "Files required to use Windows Update are longer registered or installed on your computer" is the message stop & updated. I owned the computer for more than 7 years & used XP all the time. Why does the update fail / stop now? What should I do to get it working?

  Hi B_Tan,

  Please take a look at the following information previously published by TaurArian:

  Some have reported that simply re-register the MSXML3. DLL seems to fix the problem.
  1. click on start.
  2. choose Execute.
  3. in the run box, type: regsvr32 MSXML3. DLL
  Press OK

  If this did not help, you may be re-recorded some files more:

  1. click on start.
  2. choose Execute.
  3. in the run box, type (pressing well after each one): -.

  net stop wuauserv

  Repeat the following:
  regsvr32 c:\windows\system32\wuapi.dll
  regsvr32 c:\windows\system32\wups.dll
  regsvr32 c:\windows\system32\wuaueng.dll
  regsvr32 wuaueng1.dll
  regsvr32 c:\windows\system32\dllcache\wucltui.dll
  regsvr32 wuweb.dll
  Regsvr32 MSXML3.dll
  regsvr32 qmgr.dll
  regsvr32 qmgrprxy.dll
  regsvr32 jscript.dll

  net start wuauserv

  FYI -.

  http://support.Microsoft.com/kb/958053
  See: method 1: save the Windows Update files

  http://support.Microsoft.com/kb/326253
  Method 5: Registry Windows Update engine files

  I hope this helps!

• Updated MS page error: "files required to use Microsoft Update are longer registered or installed on your computer.

  Original title : Could not get the MS update or reinstalled is recorded on the XP Home SP3 machine

  Problem: MS page update error: "files required to use Microsoft Update are longer registered or installed on your computer.
  Now, I can't verify what has / has not been done!  Updates for years, now he did!

  Sort of bumped into a wall after trying a bunch of stuff. Here's what I've done so far:

  User login was Admin status for all activities tried & emumerees below, the various assignments of site Ms.

  Difficulty of test #1 (software installation)
  He tried twice with & without entering a "net.exe stop wuauserv" before trying to install it
  "c:\WindowsUpdateAgent30-x86.exe /wuforce".
  Installation failed with the error number after: 0x8024d007

  Difficulty of test #2 (registers dll files)
  He tried twice with & without entering a "net.exe stop wuauserv" before trying to register the dll
  DllRegisterSerer in c:\windows\system32\wuapi.dll failed. Return code is 0x80070005
  DllRegisterSerer to wuaueng1.dll succeeded
  DllRegisterSerer in successful c:\windows\system32\wuaueng.dll
  DllRegisterSerer in c:\windows\system32\dllcache\wucltui.dll succeeded
  DllRegisterSerer to successful wups2.dll
  DllRegisterSerer in c:\windows\system32\wups.dll succeeded
  DllRegisterSerer in successful wuweb.dll

  (checked the version of the file c:\windows\system32\wuapi.dll is 7.4.7600.226 in the system32 directory)

  Difficulty try #3 (MicrosoftFixit)
  MicrosoftFixit50597.msi--> ran, but he did not set

  Ran the Microsoft 1.0.3001.0 Security Scanner - nothing found

  A ran Malwarebytes Anti-Malware 1.61.0.1400 - no malicious items detected

  I have my "WindowsUpdate.log", but don't see a way of fixing here

  Help.

  Hi Dena. Thanks for check up.

  My machine now works. Here's what happened between my last post and the MS update feature works once more.

  I answered my own question about the SubInACL is allowed file to use on my machine. Googling it I found that it is a 'security descriptor and Editing Migration command-line tool' and that it would work on my XP Home edition. So I have done no harm. But he didn't explain why the machine does not respond to a stop command.

  So, with no harm done and an available restore point, I thought that I would see what the SubInACL program since the drive light was working but no message readable in detail until it was over.

  Googling the first line (echo off) in the batch file led me to a MS page that explains the function of command to echo. If I wanted to see out all I had to do was remove the echo off line. So I used Notepad to remove the line and saved the file. Re-run the bat file then produces a flow of lines in the cmd window - moving too fast to read. I got what I asked for but don't want that I really needed.

  Google "screen xp file output. The second Google result was a link to www.microsoft.com/resources/documentation , which explains how to redirect the output of a command file into a text file. So I followed the example and added a ">" and a unique filename at the end of each line. Worked like a charm. Weres big, very big files. All order lines have reported no failure except HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet which had modified 204160 entries and lines 901 has failed. Looking at a small sample of these faulty items, that they seem to belong to my McAfee AV, so I expect them to be special.

  A reboot of the machine successfully. Still didn't update.

  I ran the MicrosoftFixit program with no error reported.

  Rebooted and found the update feature works again. Cross my fingers batch of this next month of MS updates does not return this ghost.

  Hope someone can benefit from my experiences.

• Error message: the files required to use Microsoft Update are longer registered or installed on your computer.

  As I never had problems with Microsoft Updates in the 3 years that I've owned this computer, I am confused now what has happenned.

  My laptop has a valid copy of Windows XP Professional and has always already been updated successfully, both manually by using the web page for the custom updates and so automatically.

  Can someone please shed some light on the question and how to fix it?  I obviously don't want to need to format this computer.

  I still regularly ran my anti-virus (N360 which is always updated) software and windows defender.  I have also always used Spybot S & D.  None of the mentioned software found no major problems, as I expect, because they are supposed to prevent intrusions. I also run the current Microsoft malicious software removal tool as an extra precaution.

  My problem is:

  After you perform a system restore to an earlier date on my laptop, I wanted to check windows update to make sure that all my security updates are in and up to date.  I opened the page to update as normal, then I accept the license agreement and I continued to the next screen.  Normally, I don't have to do this, he usually directly goes to the page.

  Then, I got this error message:

  The files required to use Microsoft Update are longer registered or installed on your computer.
  
  It is possible for me to choose
   "register or reinstall the files now (recommended)".
  However when I try this option I'm headed to the next web page where I get another error message:

  403-Forbidden: access is denied. You don't have permission to view this directory or page using the credentials you supplied.

  Could be a problem of hijackware but first see this archived thread WinXP general newsgroup: http://groups.google.com/group/microsoft.public.windowsxp.general/browse_frm/thread/4789b22822070e68/ee1886e36b8d6608?#ee1886e36b8d6608

  QED: Have you installed an update to wireless card that had been offered by Windows Update, the other day? ~ Robear Dyer (PA Bear) ~ MS MVP (that is to say, mail, security, Windows & Update Services) since 2002 ~ WARNING: MS MVPs represent or work for Microsoft

• I get a message that says, "files required for Windows to run correctly have been replaced by unrecognized versions...» »

  Original title: Windows unrecognized files

  I get a message that says, "files required for Windows to run correctly have been replaced by unrecognized versions." To maintain stability, Windows must restore the original versions of these files. Insert your Windows XP Professional CD2 now. "I don't have this CD.  What can I do to fix the problem?

  Hi Kathy111,

  ·         Exactly when you receive this error message?

  I suggest you to perform the auditor of system files on the computer.

  You may consult:

  Description of Windows XP and Windows Server 2003 System File Checker (Sfc.exe)

  http://support.Microsoft.com/kb/310747

  Note: if it asks you the service pack CD, follow these steps from the link: you are prompted to insert a Windows XP SP2 CD when you try to run the tool on a Windows XP SP2 computer system File Checker:

  http://support.Microsoft.com/kb/900910 (valid for Service pack 3)

  Hope this information helps.

• the files required for Windows to run correctly have been replaced by unrecognized versions

  Get this message: "files required for Windows to run correctly have been replaced by unrecognized versions.
  I have no problems with my computer.

  What happens here?  Should I take any action?  If Yes, what?

  Hi AZK11,

  ·         Exactly when you receive this error message?

  ·         Did you do changes on the computer before the show?

  I suggest you to consult the article in the Microsoft Knowledge Base and check if it helps.

  Description of the Windows File Protection feature

  http://support.Microsoft.com/kb/222193

  Hope the helps of information.

• What does it mean when windows 7 can't copy the files required for installation?

  I tried to install windows 7 on my Dell.I have xp on it, but when I run the first step of copying the files it stops to 60% and says "windows cannot copy files required for installation. Make sure all files required for installation are available, and restart the installation. How can error code 0 x 80070001"I fix?

  See if this post is of no help: http://answers.microsoft.com/en-us/windows/forum/windows_7-windows_install/error-0x80070001-cannot-copy-files-needed-for/e2b51d33-adad-43a1-b37f-19537bdfee2a

  J W Stuart: http://www.pagestart.com

• Loading error when you try to load the Halo 2 "files are missing or damaged in the installation directory. A few important files required to run this game are missing from the installation directory.

  Original title: load error when you try to load Halo 2

  People at Microsoft, I have a problem trying to load Halo 2 on my dv7 Paviliaon with Vista and the 2.8 GB Intel Centrino 2 processor. When I try and load the game, I get and error stating: "the files are missing or damaged in the installation directory. A few important files required to run this game are missing from the installation directory. "It bothered me for several reasons. One: the disc that I use is an original disc out of the box so hsould have no problem. Two: the game has been loaded previously on the same computer without apparent problem at the time. It has been deleted (don't remember why) and when I tried to reinstall, the error came. Three: I did as recommended and updated all programs and drivers, nothing works. So my question is, how do I reinstall Halo 2 and what this problem will arise if I decide to buy and load Halo 3?

  Thank you for your time in advance.

  Hello

  As you are facing problems with Halo 2, I suggest you to refer the link for better support:

  http://forums.haloonwindowsvista.com/forums/

• Installation of Windows Vista disc will not re - install. "files required for installation are not available" error 0x8007045D code

  My computer is slow, so I decided to format the C drive and re - install Vista with the installation disc. I did it once before and it worked. This time, however, I tried to install it and once he got to the 'Copy files' section and "Expanding files" error message came up saying: "Windows cannot install required files. Make sure all files required for installation are available, and restart the installation. Error code: 0x8007045D

  I tried to restart the computer, and restart the installation, but nothing does.

  I need your help please!

  It's an IO error.  Try to wipe the dvd with a soft cloth and then try again.  The drive itself may also need cleaning.

• Upgrade Vista to Windows 7 error: "Windows cannot copy files required for installation. The files may be damaged or missing. Error Code Ox80070017.

  I am upgrading of Windows Vista Home Premium (32-bit) for Windows 7 Home Premium (32 bit) - but getting stopped everytime I try, I end up with a dialog box stating: "Windows cannot copy files required for installation. The files may be damaged or missing. Make sure all files required for installation are available, and restart the installation. Error Code Ox80070017.

  What should I do to resolve this problem and allow full of Windows 7 installation? (my computer is a Compaq Presario V6000).

  Hello

  What installation media you are using?

  Method 1:

  Error 0 x 80070017 translates "CRC error" which means that the files that are copied from the disc are not making it to the hard drive with the same structure, which means that the 'original' the disk files are modified/changed/corrupted while being copied to the location of the 'destination' on your disk during Setup.

  This usually means a bad DVD, or an error reading on the DVD player.

  I suggest you follow the link and check.

  Upgrade Windows Vista to Windows 7

  http://Windows.Microsoft.com/en-us/Windows7/help/upgrading-from-Windows-Vista-to-Windows-7?T1=tab02

  Method 2:

  Temporarily disable the antivirus on the computer running software and check if you are able to install the software.

  Disable the anti-virus software

  http://Windows.Microsoft.com/en-us/Windows-Vista/disable-antivirus-software

  WARNING: Antivirus software can help protect your computer against viruses and other security threats. In most cases, you should not disable your antivirus software. If you need to disable temporarily to install other software, you must reactivate as soon as you are finished. If you are connected to the Internet or a network, while your antivirus software is disabled, your computer is vulnerable to attacks.

  Enable or disable Windows Firewall

  http://Windows.Microsoft.com/en-us/Windows-Vista/turn-Windows-Firewall-on-or-off

  WARNING: There may be loss of data through an analysis using firewall to eliminate the virus as appropriate

  Method 3:

  I also suggest you to follow the link and check.

  Check your hard drive for errors

  http://Windows.Microsoft.com/en-us/Windows-Vista/check-your-hard-disk-for-errors

  Important: When running chkdsk on the drive if bad sectors are found on the disk hard when chkdsk attempts to repair this area if all available on which data can be lost.

• Windows cannot copy files required for installation. The files may be damaged or missing. Error code: 0 x 80070241.

  I had a lot of trouble trying to install the 64-bit version of windows 7 Home Premium on my 64-bit vista, and my question is multi-part. If it is relevant, it's my 2nd copy of windows 7 I have tried. Initially, I had the problem of not being able to run the installation on two copies with the error "'autorun.dll' could not be found or is damaged. Error code is [0x7E]. "However, I managed to get into with my 2nd copy installation after restarting my computer. Once in Setup, I got another error that stopped the installation that says "windows not could create an installation folder. Error code is 0 x 80070017. "Again, I rebooted my computer and started the installation again, this time following installation was decently through but stopped when I got the error"Windows cannot copy files required for installation. The files may be damaged or missing. Error code is 0 x 80070241. "I then backed up and restarted my computer and then tried to use the option to install custom but then got the error"E:\sources\autorun.dll is not designed to run on windows or it contains an error. Try to install the program using the original media, or contact your system administrator. "coupled with the error"the file 'autorun.dll' could not be loaded or is corrupt. Error code is 0xC1"again once I restarted and tried the custom option but got the error" Windows has no load the required file WinSetup.dll.» The file is possibly corrupted. To install windows, restart the installation. Error code is 0x3E6. "I restarted my computer and tried the custom triple option more and still have the error"Windows cannot copy files required for installation. The files may be damaged or missing. Error code is 0 x 80070241. »

  I understand that my problem is very complex, but it seems to be built around a missing or damaged file. Thanks if you can tell what's wrong or what to do.

  Tips for solving common problems when Windows 7 won't install troubleshooting

  1. start Windows Upgrade Advisor to see if there are known issues that might affect the installation and correct them.
  http://Windows.Microsoft.com/en-us/Windows/downloads/Upgrade-Advisor

  2 disable any security software, including anti-virus programs and firewalls.
  3 make sure that your computer has the BIOS and latest drivers.
  4. disconnect all external devices except the keyboard and mouse before installing.
  5. If your computer/motherboard integrated video use and remove the dedicated video card.
  6. If you have a large amount of RAM (memory), try to reduce the amount of RAM installed. 1 GB if 32-bit installation, 2 GB for 64-bit, then replace RAM if the upgrade was successful.
  7. If you have downloaded Windows 7 and it burned a DVD test burn again at the slowest speed possible. It is also possible the download may have errors, you can try to download it again.

  8. check your RAM (memory) to find errors. This can take some time.
  (A) Insert the Windows 7 DVD and restart the computer.
  (B) start from the Windows 7 DVD.
  (C) select your language, and then click Next.
  (D) click on "repair your computer" then select the operating system to fix it.
  (E) click on the link of the Memory Diagnostics in the system recovery menu.
  (F) the computer will restart and your memory is checked for errors.

  9 turn off startup programs:
  (A). Click Start, type MSCONFIG in the search box and press ENTER.
  OK the authorization of user account control and password if necessary
  If you are using XP: click Start, run, and type: MSCONFIG and click OK.
  (B) on the general tab, click Selective startup.
  (C) just below the selective startup, clear the checkbox "Load Startup items".
  (D) click the Services tab, check "Hide all Microsoft Services", and then click Disable all.
  (E) click OK, and then restart the computer.
  (F) try the upgrade again.

  (NOTE: If the upgrade fails and you continue to use your rear security software, then also go back into MSCONFIG and under the general Tower XP/Vista tab, click "Normal startup", and then click OK to exit.)

  Questions about installing Windows 7?
  FAQ - Frequently Asked Questions from Installation Windows 7 & responses