Similar Questions

• I am running windows vista sp2 and I get an error message "cannot load resource dll" How can I fix the problem.

  Have noticed that my history of visited web sites is saved is more and the error message above appears whenever I start my laptop, I tried to download ie9 instead of run the ie8 I have, he (ie9) is not installed. I have also tried to use the repair and fix the items, but they don't work anymore. can anyone help? TY

  Hi John,.

  (1) how long have you encountered this problem?

  (2) what is the complete error message you receive at startup?

  (3) do you get an error message when you try to install Internet Explorer (IE)?

  (4) are what patches you referring? What happens when you try to invoke?

  Method 1:  Put the computer to boot and then check if the problem persists

  Follow step 1 in the link below,
  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7

  If everything works well after a clean boot, you can deduce that some third-party services are at the origin of the problem.

  Continue with the remaining steps to pin-point on the third party service.
  After find you the program that is causing the problem, you will have to perhaps to update or install a newer version of the program, if you rarely use that you should consider uninstalling the software.

  Important: n ' forget not to put the computer to a normal startup follow step 7 in the link.

  Method 2: If a Protection of resources Windows (WRP) file is missing or is damaged, Windows may not behave as expected. Auditor of file system (CFS) scan to fix all of the corrupted system files. To do this, follow the steps mentioned in the link below:

  How to use the System File Checker tool to fix the system files missing or corrupted on Windows Vista or Windows 7

  http://support.Microsoft.com/kb/929833

  Method 3:

  You can see the steps by Afzal T and Azeez N in the links below to solve problem of navigation history

  http://answers.Microsoft.com/en-us/IE/Forum/IE8-Windows_7/Internet-Explorer-will-not-save-history/c06284ac-595e-400F-831C-7aa79948de1d

  http://answers.Microsoft.com/en-us/IE/Forum/IE8-windows_other/Internet-Explorer-8-does-not-save-all-history/3533d7d4-72de-45B9-AAE9-1db7b6cba5d7

• Error loading resource DLL

  At startup I get an error when loading resource DLL - if I check on the battery, I get "error loading c:/Progra~1/tHINKpAD/uTILIT~/pWRMGRV.OCX

  Hi MJurban,

  1. did you of recent changes on the computer?

  2 when was the last time it was working fine?

  It is possible that some third-party programs installed on the computer is causing the problem.

  I suggest that you perform a clean boot and check.

  To help resolve the error and other messages, you can start Windows Vista or Windows 7 by using a minimal set of drivers and startup programs. This type of boot is known as a "clean boot". A clean boot helps eliminate software conflicts.

  See the link below to learn more about how to clean boot.

  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7

  http://support.Microsoft.com/kb/929135

  Reset the computer to start as usual

  When you are finished troubleshooting, follow these steps to reset the computer to start as usual:

  (a) click Start, type msconfig in the search box and press ENTER.

  (b) If you are prompted for an administrator password or for confirmation, type your password or click on continue.

  (c) under the general tab, click the Normal startup option, and then click OK.

  (d) when you are prompted to restart the computer, click on restart.

  I hope this helps!

  Halima S - Microsoft technical support.

  Visit our Microsoft answers feedback Forum and let us know what you think.

• Error occurred when parsing the plug-in software

  I'm upgrading to 11g 11.1.0.1.0 Cloud control grid control 12.1.0.3.0 using 1-system approach. And I patched to the pre-upgrade console.

  After that I downloaded all the agents and plugins form upgrade to Oracle Enterprise Manager Cloud control 12.1 & lt; / title & gt; & lt; meta name = & quot; Title & quot; content = & quot; Upgra...

  When I try to validate the software, you can validate only agents, for the plugins, it displays:

  I use the root user, and zip files are all 777, unzip it works, I can see the plugin_bin file in my directory, but it is empty

  Thanks for any help!

  Error occurred when parsing the plug-in software. Impossible to validate sar agent software: /tmp/plugins/12.1.0.3.0_oracle.em.smss_2000_0.zip Impossible to validate sar agent software: /tmp/plugins/12.1.0.5.0_oracle.sysman.db_2000_0.zip Impossible to validate sar agent software: /tmp/plugins/12.1.0.3.0_oracle.sysman.emrep_2000_0.zip Impossible to validate sar agent software: /tmp/plugins/12.1.0.3.0_oracle.sysman.csa_2000_0.zip Impossible to validate sar agent software: /tmp/plugins/12.1.0.3.0_oracle.sysman.beacon_2000_0.zip Impossible to validate sar agent software: /tmp/plugins/12.1.0.5.0_oracle.sysman.emas_2000_0.zip Impossible to validate sar agent software: /tmp/plugins/12.1.0.3.0_oracle.sysman.oh_2000_0.zip

  Hello

  Please note the plugin software used in the upgrade page 12 c Console is different from the one used during the upgrade of the WHO, so please make sure that the correct software is used

  1. navigate to the following location, where the binaries of software are installed and verify the plugin .opar file listed in the error message:

  $ cd <12c_OMS_HOME>/sysman/install/undeployed_plugins

  If available, copy them to a location that is accessible.

  2. If the plugin Internet files do not exist in the 12 c SGD Oracle Home, then download and stage the agent and software plugins correctly in the intermediate directory from the following URL.

  http://www.Oracle.com/technetwork/OEM/grid-control/downloads/OEM-upgrade-console-502238.html

  After you download the software and verify that the intermediate directory is properly referenced, run again the validation of the software.

  Check also the steps are as

  EM 12: the upgrade of the 11.1.0.1 Enterprise Manager on Linux x86_64 to 12.1.0.1 with method 1-System (Doc ID 1364931.1)

  Kind regards

  Rahul

• says that there is an update of firmware available for my 3 t time capsule. I get "an error occurred when downloading". How to find the problem?

  I said that there is an update of the firmware available for my 3 t time capsule. I get the message "an error occurred when downloading". How to find the problem? I have elcapitan 10.11.6 and capsule version 7.7.3

  Try temporarily, connect your MacBook Pro to your Time Capsule using an Ethernet connection... If not already, then try downloading the firmware again.

• An error occurred when to partition the drive

  I have a MBP 2012 retina end 13 "El Capitan 10.11.6

  The hard drive in the machine is swapped with Transcend SSD of retinaTRIM is not enabled.

  I'm trying to install 10 Windows using Boot Camp, and I get this error.

  An error occurred when to partition the drive

  Your drive cannot be partitioned.

  I've tried-

  • reset the PRAM,
  • First aid running in the desktop utility and
  • running/sbin/fsck - AF in single user Mode.

  Nothing has worked.

  Any help is greatly appreciated.

  Maybe you have not enough contiguous free space to create the partition.

• an error occurred when checking for a software update

  My iphone6s when I check for the update, dosent work and say:

  an error occurred when checking for a software update.
  Please help me
  

  Greetings harera22dec,

  Thank you for using communities Support from Apple!

  I understand that in trying to upgrade to the latest version of iOS on your iPhone, you get an alert that says: "year error occurred while searching for an update of the software.»

  To begin troubleshooting this situation, I would first work through the steps in the section on your iPhone, iPad or iPod touch in the following article, and then try the update again.

  On your iPhone, iPad or iPod touch

  If you cannot connect to the iTunes Store on your iPhone, iPad or iPod touch:

  1. Make sure that your date, time, and time zone are correct. Tap Settings > general > Date & time. Time zone can list another city in your time zone.
  2. Make sure your iOS software is up-to-date. Tap Settings > General > software update to check for updates. You can also connect your iOS device to iTunes and click on search the update on the summary page of your device.
  3. Check and verify that you are in range of a Wi - Fi router or base station. If you use the cell service, make sure the cell data are lit settings > cellular. If you are connected to cellular data, large items can not download. You may need to connect to the Wi - Fi to download applications, videos and podcasts.
  4. Make sure you have an active Internet connection. Check your device Manual for Internet connectivity.
  5. Check if other devices, such as laptops, are able to connect to the network of Wi - Fi and Internet access.
  6. Reset the wireless router by turning and then again.

  If there is still a problem, learn what to do if your device connects to a Wi-Fi network.

  If you cannot connect to the iTunes Store - Apple Support

  If the problem persists, try updating your iPhone from another network or from iTunes on a computer than this article implies.

  If you receive a message that says: "year error occurred downloading iOS ', try again later. If this happens again, try to update your device using a different network or use iTunes to update your device.

  Get help with updates of live iOS - Apple Support

  Have a great day!

• Will not install driver installer of EPSON Scan (L210) - ' error occurred when installing re start the computer, and then try again.

  Original title: problem installing scanner

  EPSON Scan (L210) setup driver moved - "is an error occurred when installing re start the computer, and then try again.

  Hey there, MAHIPALSINGH143

  Welcome to the Microsoft community forums.

  So that the community help to install your printer, we will need more information. Please answer these questions:

  1. Windows what operating system are you running (Windows 10, 8.1, 7)?
  2. The troubleshooting steps have so you far?
  3. Did you upgrade to a new operating system?
     1. If Yes, what operating system you were on before?

  When you look at the error message, it doesn't look like you need to update your drivers. You will need to go on the official website of manufacturers, with your EPSON.

  Here is the site for the EPSON drivers: http://www.epson.co.uk/gb/en/viewcon/corporatesite/support

  When I entered your model of "Epson Scan (L210)" number, it does not recognize the product. Would you be able to check and make sure that you have provided the correct model number? Your model is a new printer?

  Kind regards

• Win2k3 Server IIS SChannel event 36871 "a fatal error occurred when creating the SSL server credential information."

  To make a long story short, I went to use client software that I use a few times a week and it would not connect to the server, complaining not found or number of SSL.  When research various dcom, schannel errors errors in the event logs and a few others, I systematically over the last 24 hours cleared up the boot is so now clean (no time starting network on startup and no message on the service could not start).  It seems that something has happened a month ago after that the server crashed where at least the first DCOM messaged presented themselves, but everything has been working well until it didn't.  The dcom patches end up having to do with the ...\rsa\machinekeys (and the way that it) had a few "account unknown" in it, I cleaned everything that (at a time since I removed all items in this folder, but then put their subsequent return (by crushing all except 2 after creating a new certificate), had to reinstall virtual server and iis 6) , at some point as well.  In any case, I'm at the point where everything works (no event log errors/etc) from startup until you try to connect to the IIS 6 Server using https:... at this point, you get the event SChannel 36871 "a fatal error occurred when creating the SSL server credential information." (no additional information) is connected and the client browser cannot access the site (you can keep trying and it does not work but no event log entry more).  So that's where I'm sitting, http: works fine, https: No.  Certificate appears in the default Web site correct, said valid and possesses the private key, port 443 is there, all addresses by default, netstat shows port 443 same process id as the port 80.  I can't find a copy of SSLDiag do test to see if that prove something?

  So I need help what is not going to get this new job of fixing.  What should I do?

  Thank you!

  Hello

  Your question of Windows is more complex than what is generally answered in the Microsoft Answers forums. Appropriate in the TechNet forums. Please post your question in the TechNet forums.

  You can follow the link below to ask your question:

  http://social.technet.Microsoft.com/forums/en-us/winservergen/threads

  I hope that helps!

• "An error occurred when checking for updates. 90074002

  "An error occurred when checking for updates. 90074002 you will not be able to sign until this review is complete. "Incidentally I can't delete the games for windows live, he always tells me that to locate the games for windows live .msi files or Xlive.msi. I am at a loss here. I can't find anything on the web with this error code. Any ideas?

  "An error occurred when checking for updates. 90074002 you will not be able to sign until this review is complete. "Incidentally I can't delete the games for windows live, he always tells me that to locate the games for windows live .msi files or Xlive.msi. I am at a loss here. I can't find anything on the web with this error code. Any ideas?

  I would first scan the computer for malware using Malwarebytes and SuperAntispyware. Make sure that you update the scanner before scanning. Once finished, remove any found object and then return...

  Malwarebytes.org

  Superantispy-portable  < you="" will="" not="" need="" to="" update="" this="" scanner="" if="" used="" within="" a="" reasonable="" amount="" of="" time="" after="">

• In Vista, doing the system restore, get error "unspecified error occurred when using System Restore.

  My system restore keeps coming back with the error, unspecified error occurred when using System Restore. Cannot change files. Also, after that I am unable to use my avast antivirus. All the sheilds on my Avast are lost. I; m not computer saavy so please help me

  Hello

  You can be infected with the Malware

  malware stops normally you use the system restore protect themselves remove you

  Download update and scan with the free version of malwarebytes anti-malware

  http://www.Malwarebytes.org/MBAM.php

  You can also download and run rkill to stop the process of problem before you download and scan with malwarebytes

  http://www.bleepingcomputer.com/download/anti-virus/rkill

  If it does not remove the problem and or work correctly in normal mode do work above in safe mode with networking

  Windows Vista

  Using the F8 method:

  1. Restart your computer.
  2. When the computer starts, you will see your computer hardware are listed. When you see this information begins to tap theF8 key repeatedly until you are presented with theBoot Options Advanced Windows Vista.
  3. Select the Safe Mode with networking with the arrow keys.
  4. Then press enter on your keyboard to start mode without failure of Vista.
  5. To start Windows, you'll be a typical logon screen. Connect to your computer and Vista goes into safe mode.
  6. Do whatever tasks you need and when you are done, reboot to return to normal mode.

  If not, try Safe Mode do a system restore

  http://www.windowsvistauserguide.com/system_restore.htm

  Windows Vista

  Using the F8 method:

  1. Restart your computer.
  2. When the computer starts, you will see your computer hardware are listed. When you see this information begins to tap theF8 key repeatedly until you are presented with theBoot Options Advanced Windows Vista.
  3. Select the Safe Mode option with the arrow keys.
  4. Then press enter on your keyboard to start mode without failure of Vista.
  5. To start Windows, you'll be a typical logon screen. Connect to your computer and Vista goes into safe mode.
  6. Do whatever tasks you need and when you are done, reboot to return to normal mode.

• An error occurred when DNS was questioned about the resource record (SRV) service location used to locate a domain controller Active Directory (AD DC) for the domain 'HAMI. LOCAL ".

  An error occurred when DNS was questioned about the resource record (SRV) service location used to locate a domain controller Active Directory (AD DC) for the domain 'HAMI. LOCAL ".

  The error was: "an existing connection was to be closed by the remote host".
  (0 x 00002746 WSAECONNRESET error code)

  The query was for the SRV record for _ldap._tcp.dc._msdcs. HAMI. LOCAL

  Hello

  Your question of Windows 7 is more complex than what is generally answered in the Microsoft Answers forums. It is better suited for the IT Pro TechNet public. Please post your question in the Forums TechNet Windows 7 Technet.

  Here is the link:
  http://social.technet.Microsoft.com/forums/en-us/w7itpronetworking/threads

  Hope this helps

• Receive the KB 953691 error code when loading LifeCam 3.0

  Original title: kb/953691

  Dumm it down to a classified noncomputor like me, how or what I do to work around the kb/953691 error code when loading LifeCam 3.0? My LifeCam 1.2 has not had a problem with Vista, but does now with Windows 7.

  Thanks for any direction, wish MSM would take a direct responsibility with a patch rather than a group of form... Richard

  p.s., xxxx always Vista and Windows 7 on XP, could have been better with a Mac laptop and my XP PC on Vista/Win7 laptop!

  Hi Richard,

  You can try the following steps and check if it helps.

  Step 1:

  Reset the permissions for the folder to full access:

  a. Click Start, click Run, type Explorer.exe and then click OK.

  b. expand computer.

  > Locate the C:\Documents and Settings\folder \My Documents\LifeCam

  > Locate the C:\Users\folder \Pictures\LifeCam

  c. right click on the folder and then click Properties.

  d. on the Security tab, click Administrators, click full control under allow and then click on apply.

  e. on the Security tab, click System, click full control under allow and then click on apply.

  f. on the Security tab, click everyone, click on remove and then click OK.

  Step 2:

  Configure the firewall settings to allow LifeCam.exe:

  To examine and configure your firewall settings, follow these steps:

  a. Click Start, click Run, type wscui.cpl and then click OK.

  b. in the Windows Security Center, click Windows Firewall.

  c. the Exceptions tab to add program and port exceptions to allow certain types of inbound traffic. You can define a scope for each exception.

  d. Select LifeCam.exe and add it to the list of Exceptions.

  e. If you are using another firewall, check the manual to configure the firewall to add LifeCam.exe to the list of exceptions.

  Hope this information is useful.

  Jeremy K
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

  If this post can help solve your problem, please click the 'Mark as answer' or 'Useful' at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

• An error occurred when accessing the Windows CardSpace...

  So, I get this error message whenever I clicked on Windows CardSpace in Control Panel. "An error has occurred all by accessing the Windows CardSpace. Please see the the event log for more details. "I checked the event log and I read a bunch of posts which basically means the same thing. "An error occurred when communicating with the Windows CardSpace service." "" An unknown exception caused the request to fail. For more information, please see the event log. Inner exception: attempted to perform an unauthorized operation. ""An error occurrred while accessing the card collection.  The store directory or file ACL Bank had is shown to be altered. The ACL have now been restored to their default settings. ""An error occurrred while accessing the card collection.  Unable to open the store. »

  WHAT DOES THIS MEAN?
  

  I logged the administrator account and noticed that Windows CardSpace actually worked. Well, it's good to know he works at least on one account...

  I would try to make a new user account, but I haven't the time to copy everything back. I'm not seriously. Last week, I spent three hours to copy my files after reinstalling Windows. I really want to do it again.

  I read that this may be evidence of a corrupted user profile, but I don't get any messages on my user profile be corrupt.

  Is there an another fix for this error?

  Please help me with this, I know other people had this problem.

  Thanks in advance,

  ~ yosecchi1098

  Hello

  You can post your question here for assistance:

  http://social.technet.Microsoft.com/forums/en-us/category/w7itpro

• Error occurs when you use SQL Server 2012 assessment vs window detail of the object in window 7 - KERNELBASE.dll exception 0xe0434352

  Hello

  Error occurs when you use SQL Server 2012 assessment vs window detail of the object in window 7.  I use the window of the object but the detail of the objects window arrives and immediately SQL Server stops with the error below and then opens again.  I didn't find any help with this specific error is but suspect there is a problem between SLQ Server 2012 et.NET Framework 4.  Unfortunately, I do not know what it takes in this regard.

  Thanks, Deb

  Event ID: 1000
  Task category: (100)
  Level: error
  Keywords: Classic
  User: n/a
  Computer: Deb - HP
  Description:
  Name of the failing application: Ssms.exe, version: 2011.110.3000.0, time stamp: 0x5081c1cd
  Name of the failed module: KERNELBASE.dll, version: 6.1.7601.18015, time stamp: 0x50b83c8a
  Exception code: 0xe0434352
  Offset: 0x0000c41f
  ID of the process failed: 0x13a8
  Start time of application vulnerabilities: 0x01ce609a6d3db991
  The failing application path: C:\tempSQLWOW\110\Tools\Binn\ManagementStudio\Ssms.exe
  Path of the failing module: C:\Windows\syswow64\KERNELBASE.dll
  Report ID: 1fb1cbfb-cc8e-11e2-b436-abd2bebb3f17

  Hi Claude,.

  The question you posted would be better suited in the TechNet Forums. I would recommend posting your query in the link below.

  http://social.technet.Microsoft.com/forums/en-us/category/SQLServer

  Good day!

  Answer please if you face concerns.