GBA 3.3 download

Similar Questions

• ACS 5.2 patch 5-2-0-26 - 2.tar.gpg

  Hi all

  Anyone successfully installs patch 5-2-0-26 - 2.tar.gpg 5.2 GBA? After downloading the patch of my deposit of tftp I got the error message:

  ACS patch install 5-2-0-26 - 2.tar.gpg repository tftp
  chmod: cannot access at the "* .sh ': no such file or directory".
  Patch not valid 5-2-0-26-2.tar.gpg'-missing install.sh
  % Error: failed to open / validate the patch

  I tried to download the patch on Cisco's Web site twice with the same result. I also tried patch 5-2-0-26 - 1.tar.gpg does not. It seems to be no mistake on the site of the tftp server (I use 3CDaemon).

  Thank you very much for your answer.

  Yours sincerely,

  Zdenek Rottenberg

  Yes, I installed the Update Rollup 2 without error but I'm not using TFTP FTP with anonymous, have you tried to download the file with a TFTP client, this is the first time use you TFTP to ACS?

• Download ACL GBA 5.2 using authentication for 802. 1 x

  Hi all

  I configured ACS 5.2 for authentication authentication of 802. 1 x. It works as well, getting customers belong to their VLAN respective after a successful authentication.

  Now I want to assign downloadable ACLs for particular users can someone help me in the downloadable ACLs configuration GBA 5.2.

  Any feedback is much appreciated.

  Thanks in advance,

  Selva.

  Hi Selva,

  Based on that you want to assign the DACL? based on the user name? Group?... etc?

  This document will be useful for you:

  http://tiny.cc/ogrxvw

  ignore the part of the SAA. concentrate on the config of the ACS.

  The doc use ASA as the AAA client. The difference is that you use a switch. but the idea is the same.

  HTH

  Amjad

  Rating of useful answers is more useful to say "thank you".

• How to increase the timeout for download on GBA?

  Hello

  We try to download a large file (50 to 75 MB) PDF to our Association. But we have always had an HTTP timeout. Send us the request typical HTTP POST to .../Packaging/Package with some parameters.

  I think there should be some options for the packaging.conf file in / etc to increase the time-out period. But unfortunality I wasn't able to find these options in the documentation. Maybe I'm blind too.

  Can you help me please? Is there a list with all the options for packaging.conf, fulfillment.conf and admin.conf? May I can find other interesting options in this list.

  Thank you in advance!

  Kind regards

  Nicolas

  I upload the file via SFTP in a location known and accessible to the service of packaging and if you send the application package using the dataPath option, not the data option.
  This will also help with the use of memory on the server package.

• Download the ACS software... ?

  I don't know about the 90-day trial; However, is there a way to download a full version for windows to the Cisco site. I am able to download the software so the isn't a problem. I don't see anywhere to download a full version and not only test 90 days?

  TKS-

  You must purchase the software to full version. It is only available on CD. When you buy the ACS software, it comes with a device (ACS1111). I do not see the neccessity or the advantage of Cisco made available for download on their website the version full of GBA.

• Why ACS can not display page downloadable ACLs

  Hello

  I have a GBA for windows, version 4.0.1.27.

  After successful installation, I found there is not point of downloadable ACLs in the shared component profile? I can see his support on the right place.

  Why not configure downloadable ACLs in this ACS, y at - it all the other work I have to do?

  THX

  Hello

  Try this.

  Configuration of the interface-> Advanced Options

  Click the check box for

  Download ACL user level

  Group and level downloadable ACLs

  Click on submit

  Then go back to the shared profile components and it should now be an option.

  HTH

  Jon

• PAK for ACS ios download with license keys

  Hello, I am new on the product license and registration of Cisco. I want to download the latest version of the ACS software and the registration keys. I know I have to get a PAK started with Cisco, but I have no idea how to do to start the process, another thing that confuses me is that I need a Smartnet account and I tried via chat Cisco but redirected me to a phone number and then delivered four times until disconnected...

  Help, please!

  Kind regards

  Gary

  When you buy GBA, you should get a PAK of dealer by delivery. IF you have not received one, please contact your dealer. If they claim ignorance, they control the tools CCW and CSCC (Workspace of trade of Cisco and Cisco Service contract - tools used by Cisco resellers to manage customer orders and support right).

  SMARTnet is optional and mandatory for the upgrade eligibility and support of TAC.

  A registered cisco.com (Smartnet not required) account is required to get the key, once you have the PAK in hand.

• Authentication of GBA / list DACL Timeout

  Hi all

  We have an installation of the SAA program to authenticate users who connect in the DMZ by RADIUS (ACS) and if it is allowed, download an ACL of GBA.

  Users are to expire after 15 minutes and have to be re - authenticate.  I guess it's a timeout value.

  How can I increase this value of timeout on GBA?

  Thank you!

  If you do not order that the SAA, you will need to adjust this setting:

  VPN-session-timeout

  If you want to control this GBA you can change/return the following attributes in the "authorization profile.

  Attribute RADIUS 50 - CVPN3000/ASA/PIX7.x-Authd-User-Idle-Timeout

  Located under the "Radius attributes: TAB.

  Reauthentication timer: Value  

  Located under the tab "common tasks".

  This requires that you run ACS 5.x.

  Thank you for evaluating useful messages!

• Download ACL ACS 5.2

  Hi all

  How many lines ACL is possible configure in downloadable ACL in ACS 5.2?

  Best regards

  Evandro.

  Hello

  GBA 5.x, you have 2 ways to send ACLs and the other has no limit and the other.

  The limitation is the maximum size of 4096 bytes, which can have a RADIUS packet.

  Option 1 - VSA Cisco. Supported by older versions of IOS.

  / * Style definitions * / table. MsoNormalTable {mso-style-name: "Table Normal" "; mso-knew-rowband-size: 0; mso-knew-colband-size: 0; mso-style - noshow:yes; mso-style-priority: 99; mso-style - qformat:yes; mso-style-parent:" ";" mso-padding-alt: 0 cm 0 cm 5.4pt 5.4pt; mso-para-margin: 0 cm; mso-para-margin-bottom: .0001pt; mso-pagination: widow-orphan; do-size: 10.0pt; do-family: "Times New Roman", "serif" ;} "}

  Basically, you need to use Cisco VSA attributes in the format like for example:

  IP:inacl #100 = udp allowed any any eq bootps

  IP:inacl #200 = udp allowed any any eq field

  IP:inacl #300 = permit ip any host 192.168.80.2

  IP:inacl #400 = permit ip host 192.168.80.2 all

  IP:inacl #500 = deny ip any one

  ' 1) go to: "elements of strategy >... > authorization and permissions > network > authorization profiles > create and on the"common tasks"make sure that you use no name of downloadable ACL (see screenshot).

  (2) then the RADIUS attribute tab enter the ACL line-by-line (see screenshot).

  Then, you link the authorization profile to access the Service.

  Step 1:

  

  Step 2:

  

  Option 2 - DACL. Here, the ACL is fragmented into several packages if necessary RADIUS. This is supported by the IOS devices on the latest versions of IOS: 12.2 (33) SXI on the Catalyst 6500, 4500 catalyst release 12.2 (50) SG and then on Catalyst 3750/3560 and 2960 families on 12.2 (50) SE.

  1) go to: ' policy elements > authorization and permissions > named Permission objects > downloadable ACL "and create a dACL (see screenshot).
  "" 2) go to: "elements of strategy >... > authorization and permissions > network access > authorization profiles > Create" list dACL for a link to the authorization profile (see screenshot).
  Then, you link the authorization profile to access the Service.

  Step 1:
  

  Step 2:
  

  Full configuration example:

  http://www.cisco.com/en/US/prod/collateral/iosswrel/ps6537/ps6586/ps6638/Whitepaper_c11-532065.html.

  Hope this helps,

  Tiago

  --

  If this answers your question please mark the question as "answered" and write it down, so other users can easily find it.

• Download ACL checking of the switch

  Hello

  I have download ACL goes to the 4500 Series switches and 3750. GBA 5.2, I can see when an ACL is downloaded and it is very good, and switch, I can check for downloadable ACL name.

  My question is how can I check the DACL to see to whom it has been applied and any other available details OF the SWITCH?

  I know see the list of access shows me the ACL, but I could have the same ACL applied to many different users on the same switch and I'm looking for a way to validate from the switch to which users the ACL has been applied to.

  Thanks in advance.

  Try this:

  show ip access-list interface
  
  
      Regards
  
      Jatin
  
      

  ~ Make rate of useful messages.

• Unable to Scan to the computer after downloading macOS Sierra. Is this a software problem?

  How can I scan from HP Envy 4500 to computer after downloading macOS Sierra?

  Hello wdemetris,

  Thanks for asking for scanning helps here in the Apple Support communities. I understand how it is important to have access to your scanner and am happy to offer help for this.

  As a precaution, we always recommend that you have backups to make sure that all your data is safe. You can perform a backup using Time Machine and an external hard drive. Use this article to help make a backup of your Mac: use Time Machine to back up or restore your Mac.

  Then, in accordance with article help: printer and scanner for Sierra, El Capitan, Yosemite, and the Mavericks macOS software, the HP Envy 4500 e-all-in-one is supported for printing and scanning. The drivers must be installed, but if not, if it please go to the App Store and check the updates tab to see if there are updates for HP. If there is, please install.

  If you have only general questions about how to get your updated scanner in place or how to scan pictures, please check out these two articles: macOS Sierra: implement a scanner & macOS Sierra: scan images or documents. If everything is configured correctly and you still have problems scanning, please visit this help article: macOS Sierra: scanning troubleshooting.

  Thanks again and have a great rest of your day.

• I have an IMAC of 2008 with 2 GB of memory plus 300 GB of storage. If I buy 2GB of memory I'll be able to download Sierra?

  I have an IMAC of 2008 with 2 GB of memory plus 300 GB of storage. If I buy 2GB of memory I'll be able to download Sierra?

  Mike,

  No, macOS Sierra is not compatible with your hardware.

  Here is an analytical compatibility.

  

• Mail is always "Download Messages".

  I noticed that Apple Mail is always "Download Messages".  This process will occur approximately every 10 minutes.  This is usually between 250 and 270 messages.  (screenshot)  However, there is no double or extra emails.  In addition, the number of downloaded emails usually does not change (perhaps by 1 or 2 later in the day).

  

  I have 4 email accounts in Mail, which are all Gmail accounts.  I went through each account settings and made sure they are all handled in the same way and have the same options are checked.

  I think I found the problem with account, because I tried with the right button and select "Take account offline" when I see that it starts to download the messages.  Once I have put offline, the download stops.  I tried to remove this suspected account and Add again, but it still does the same thing.  Any help would be appreciated!

  Hello and welcome to the communities of Apple support, ggerrits.

  If I understand your message just Mail on your Mac continues to show that it Downloads hundreds of mails every 10 minutes. I can certainly understand how she could become a nuisance to see permanently who warn even if no new messages are actually downloading. I'm happy to help him to stop appearing.

  You've done some excellent troubleshooting already to refine what e-mail account, what's happening with. The next thing that I recommend you do is to make sure that you run the version of OS X El Capitan, which should be 10.11.6. Using your Mac update, take a look at updating the software on your Mac. If you haven't done so already, I recommend also restart your Mac. Test the Mail after doing those two things.

  If the problem persists, follow these steps:

  1. With Mail open, select "Mail" in the upper left corner of your screen and select Preferences.
  2. Select the tab accounts.
  3. Select the e-mail account that you are having the problem with.
  4. Select the Advanced tab.
  5. Uncheck "automatically detect and manage account settings."

  Next, close and then restart Mail to see if you feel the same way.

  Thank you for using communities of Apple Support.

  Take care.

• Reactivate the attachments auto preview/download

  I have disabled the automatic download of attachment in Mail, as suggested in the recommendation "to save space.  But I don't like it and I want to go back to automatically preview or download attachments.

  How can I do?

  I can't find any settings in the Mail application.

  Best,

  Nicolas

  Mail > Preferences > accounts > account information - Download attachments [option]

• How can I change several download Sierra systems

  How can I change several download Sierra systems?  I have a Mac mini end of 2012 running El Capitan, over a mid-2010 Mac mini and MacBook Pro mid-2010 the two race Yosemite with limit of bandwidth on my internet connection and want to update all three systems in one download.  Is the process that apply with Yosemite and El Capitan (ie. Copy the Setup program to another location before you run it on the download system) still the way forward?  Thank you.

  You can do this or DiskMaker X allows to create a key to install it.

  (145170)