General issue of file on why my data store has 3 files with a _1 and _2

Similar Questions

• Data store space used not maching between VMWare and 3PAR

  Hello world

  I have a strange behavior between our environment VMWare and 3PAR storage system.

  I checked each data store of our cluster and for each of them, the space used in vSphere Client does not match the size of the user 'used' their volume associated with 3PAR.  The value displayed in VMware is higher.

  For example, our data store named DS03 has space around 1 TB in VMWare.  And when I checked in the Console of 3PAR, I see that the volume created for this data store has a size of the user 'used' 722 GB.

  While doing some research, I came across this post: ability to store data about the free space is not the same thing in VMware and 3PAR

  But the problem I encounter is quiet different. It's the opposite. I do not understand why the displayed value is higher in VMWare...  We are also running vSphere Server version 5.1.0

  Any advice? Ideas?

  Thank you very much.

  It's the ASIC 3PAR inline zero detection function stripping zeros of incoming data until they land on the disc. Www.3parug.com try this happens a lot.

• Save the file with the annotation and highlighting

  Hello world

  I used to save the file with the annotation and emphasize locally.

  With the new update: Version 2015.009.20079, I'm not able to do as much as Adobe does not have the location of the local file.

  Why is it like that? Is there a setting that is required to restore the previous behavior of the program?

  Concerning

  Mohammed

  Hi Mohammed,.

  In this case you may need to check the configuration of this application settings or set Acrobat Reader preferences.

  Thank you

  Abhishek

• Data store can be seen from a host, and then disappeared...

  I had a store of data on LUN 2 point.  Two GB 425 our EMC SAN LUNS have been used and it worked well on one of our ESX host.  We had not realised the rest of the armed forces had not resumed the data store.  I tried a new analysis on all hosts without success, the data store would simply not appear.  All the guests could see the LUNS, but with the same identifier.  Resignaturing disc is already enabled as these hosts also replicated LUN mount so I had to the potential problem of LUN ID set match to discount.  I checked the presentation of storage, fiber channel, zoning, everything was OK.  So I turned off the virtual machine and decided to anyone two LUNS to the Group of storage and the re - present but things only got worse...

  The data store has now completely disappeared.

  I was wondering if anyone else had encountered / solve such a problem?  I did a search on the community and the knowledge base and could not find anything to help me.

  I run fdisk and checked the Lun, but I'm stuck now.  My next step will be to log a call of support with VMWare...  Fortunately, it's on our DR site ESX host, but now I lost just a SQL database more than 600 GB in size...

  Disk vmhba1:1:0/dev/sdq (435200 MB) has 4 lanes and more recently used strategy

  FC 13:0.0 2100001b328500a5 & lt;-& gt; 500601693ce03346 vmhba1:1:0 favorite standby

  FC 13:0.0 2100001b328500a5 & lt;-& gt; 500601603ce03346 vmhba1:0:0 On assets

  FC 13:0.1 2101001b32a500a5 & lt;-& gt; 500601613ce03346 vmhba2:0:0 On

  FC 13:0.1 2101001b32a500a5 & lt;-& gt; 500601683ce03346 vmhba2:1:0 watch

  Disk vmhba1:0:5/dev/sdf (435200 MB) has 4 lanes and more recently used strategy

  FC 13:0.0 2100001b328500a5 & lt;-& gt; 500601603ce03346 vmhba1:0:5 on favorite assets

  FC 13:0.0 2100001b328500a5 & lt;-& gt; 500601693ce03346 vmhba1:1:5 watch

  FC 13:0.1 2101001b32a500a5 & lt;-& gt; 500601613ce03346 vmhba2:0:5 on

  FC 13:0.1 2101001b32a500a5 & lt;-& gt; 500601683ce03346 vmhba2:1:5 watch

  Disk/dev/sdq: 456,3 GB, 456340275200 bytes

  255 heads, 63 sectors/track, 55480 cylinders, total of 891289600 areas

  Units is 1 * 512 sectors is 512 bytes

  Device boot start end blocks Id system

  / dev/sdq1 128 891286199 445643036 unknown fb

  Disk/dev/sdf: 456,3 GB, 456340275200 bytes

  255 heads, 63 sectors/track, 55480 cylinders, total of 891289600 areas

  Units is 1 * 512 sectors is 512 bytes

  Device boot start end blocks Id system

  / dev/SDF1 128 891286199 445643036 unknown fb

  See you soon,.

  Dave

  PS. This morning I had the upgrade, one of the hosts in the cluster to 4 upgrade with the latest security patches and executing tests is when I found I couldn't vmotion prompt on any other host, and then realized the missing data on other host store.  All other hosts are 2 update, but I don't think this is related.

  Gracias thank you and Marcelo vmw-sfraser,.

  I have placed a request for assistance with VMWare and see how I'm going.  I noted that the mistake so when I saw the exit and thought that it would be likely that I have to log a call.

  See you soon,.

  Dave

• Export and general issues of file

  Hey guys,.

  We do a lot of catalogs from 8pp to 24pp and seem to have a lot of questions on export-exporting and just using the files.

  My system is as follows

  Intel Core 2 Quad Q8200
  4 GB of ddr3 RAM (only 3.5 get used)

  Windows XP pro SP3

  and Adobe CS3 Master Collection

  
  the catalogues are very heavy images and I was wondering if the following situations can cause problems:

  File Jerkness overall while navagating through documents.

  -Is a common problem?

  -several images with an effective resolution of more than 1200 will cause jerks

  -All placed images should be as close to 300 PPI as possible?

  -Make Illustrator files with mixtures of blur and transparency (I recently had a problem with that)

  PDF export

  -Computers just crash

  -Sometimes have errors of jpeg.

  -Errors of memory

  All files get packaged prior to export and all the CMYK image color profiled.

  We use master pages and character styles or paragraph and errors occur on multiple computers.

  
  So basically I was wondering especially if it's how we create and place documents or is it a problem of computer hardware/software.

  Any help would be appreciated

  Thank you.

  Probably a bad image on this page.

  Try to divide and conquer searching for it:

  Remove half of the page objects. If it exports, it is in half you deleted, otherwise it is always on the page.

  Return the objects to delete. If the bad object is in this group, remove half of this group, otherwise, remove half of the other group.

  Repeat until the object is isolated, should only take a few tries, then rebuild this image and replace.

  Moreover, my first suspects would be EPS. It is also possible that several objects is a problem, but it's less likely.

• Exporting files with wrong timestamp and bad "update" folder

  My system is running Windows 7. CC in Lightroom to 2015.

  Yesterday, while working in Lightroom, we have experienced an unexpected failure. (My dog hit the switch! Don't laugh!)

  When the system rebooted, everything seemed normal with the exception that the 'Clarity' legend was missing in the develop module. The cursor worked as expected however.

  Today I have been using Lightroom without any apparent problem until I exported some images for my external storage. I discovered that time 'Date modified' case files have been exported and the files themselves showed the "Date modified" as on 01/01/2000.

  When I import files in Lightroom, it identifies the file date and time correctly and is important to the good year/month/day.

  The system clock is correct.

  . Any suggestions would be welcome!

  Bob.

  Hi loutses,.

  Indeed, I think it's more of a NAS Trier management as LR question, incidentally, you can try to disconnect the disk completely and then plug it in again.

  Also try one last thing, the images that you exported to desktop, now move them to SIN and then see if the sort order.

  Concerning

  Rohit

• migration of data store has failed - now there are two vm - one power off?

  I was migrating a vm fw at different stores of data when a failure has occurred. They may have been cancelled or it may have been the fact that our vcenter server has restarted. I don't know if this would have caused this problem.

  In any case, now, two of the VM series two - power and the other copies are turned off. One that is off is the data store b and the virtual machine is the one data store. The strange thing is, shows of b (power off vm) data store which is where the files are located while the virtual machine is on a. When I browse a datastore I cannot find all files... It just hangs. I googled but am stuck.

  See the screenshots for more details. Thanks in advance!

  Edit: finally to load two data warehouses. They both show identical files: vmdk, vmfx, vmsd etc. for the two virtual machines on two data stores. It's weird!

  Edit 2: or vm, on or off, power to the high/off or migrate or remove from the inventory. Both are 'ping' and one that is good though.

  I figured this out. I have ssh was the host of the virtual machine is on (the two virtual machines were on the same hosts). Down to power, I ran the following command "esxcli vm kill process - type = soft - world id = xxxxx."

  That he got the vm to stop. The virtual machine of the same name already powered off then showed as "orphans". I removed the orphan vm of the inventory, the other vm started automatically acknowledgement of receipt, then I deleted the orphan vm of the 2nd data store.

• Local data store has disappeared from the data store window (necessary emergency aid)

  Dear team,

  I m facing a very strange problem, all of a sudden one of the local ESX datastore disappeared thereafter are full details we have encountered/noticed.

  A local data store disappeared from the data store window.able to see this data store to add storage Wizard, which allows us to format the same.

  * If we take a session putty from here we can see and browse this store of data without problem.

  * Virtual computers that are running on this data store work as well (all files are accessible / VM is accessible on the network)

  * Unable to take backup image do error "the object has already been deleted or was not completely created.

  * Not able to take a «cannot complete the copy file... network» clone »

  Getting from newspapers in vmkernel:

  (14 dec 17:11:39 localhost vmkernel: 0:01:55:28.677 cpu1:4097) ScsiDeviceIO: 747: command 0 x 28-the device 'mpx.vmhba1:C0:T1:L0' failed, the data of sense H:0 x D:0 x 2 P:0 x 0 0 valid: 0 x 4 0 44 x 0 x 0.

  (14 dec 17:11:39 localhost vmkernel: 0:01:55:28.677 cpu1:4097) ScsiDeviceToken: 293: Sync IO 0 x 28-the device 'mpx.vmhba1:C0:T1:L0' failed: error/o H:0 x D:0 x P:0 x 0 2 0 valid sense data: 0x4 0 44 x 0 x 0.

  (14 dec 17:11:39 localhost vmkernel: 0:01:55:28.677 cpu6:4110) capability3: 5354: Sync READ error ('. fbb.sf') (ioFlags: 8): i/o error

  Need your help urgently to solve the same.

  concerning

  Mr. VMware

  

  Dear all,

  We have enclosed a case at VMware, please find their findings on the same.

  ------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------

  After the webex session, we just had, I discovered the root cause of the problem reported to an underlying problem on the block device (the logical drive, or a problem on the Board) presented to accommodate the data in question store successfully.

  In short, whenever we try to do raw reading from the disk (from sector 0), the same always fail when we reach the 30932992 bytes (31 MB) brand with an IO error (which is consistent, he is always on this region of the disc that read operations fail, no more, no less). This result can be seen, even if no partition is in the disk (using if = / dev/sdb instead of/dev/sdb1 with dd) and even after zeroing on all sectors (if dd \u003d/dev/zero of = / dev/sdb). Strangely, read operations work fine (as he writes zeros of random data) throughout the entire disk. Keep in mind that the tests I did with no VMware tools (I used almost only dd for these operations), which prohibits certainly a VMware problem (in fact, if you were to try to start the server with a Linux live CD and run the same tests that I did, you would see the same behavior).

  I know that there is no report of material of any bad behavior on the table, but data collected with our tests today completely invalid who. The next step is for you to take this to the server provider to check for problems on the table or discs, because they are there and they are the reason for the problem you reported initially.

  Please let me know if you have other questions about it.

  Thank you

  -

  David Meireles

  Technical Support Engineer

  ------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------

  Now we have blocked a case from the hardware vendor, to see what the next move will be.

  concerning

  Mr. VMware

• In v31.0, I can view is more 'raw' XML files with line breaks and ' < ' and ' / > ' characters. Is there a setting that will give me this option?

  Until a few days ago when I opened a file XML with Firefox, I see the content of the file appears with line breaks and ' < ' and ' / > ' and elements. Like this:

  fixed image in < typeOfResource > < / typeOfResource >

   <genre authority="marcgt">picture</genre>
   <genre authority="nmc">Print, Photographic</genre>
   <originInfo>
     <dateIssued encoding="marc">1884</dateIssued>
     <dateIssued encoding="marc">1884</dateIssued>
     <issuance>monographic</issuance>
   </originInfo>
   <language>
  

  Now, it will display like this:

   still image picture Print, Photographic 1884 1884 monographic eng electronic
  

  No tags or line breaks. I need to see the entire XML file. How can I configure FireFox to display this for me? One of my colleagues uses v31.0 and XML views with tags and the line breaks for him.

  For example, I was looking at files sitemap.xml (search Google for inurl:sitemap.xml). For those who have not declared a style sheet, you should always see the classic "source highlight: presentation

  Example: http://www.website.com/sitemap.xml

  Are the files that don't appear as similar planned by not declaring a style sheet?

  As a temporary workaround, you can view the source to see the original. Either:

  • CTRL + u
  • Right click > view Page Source

• InDesign server web service - where is the support to download a file with the script and download the result?

  Hello

  I'm working on a VINE which is supposed to convert indd files in pdf format (that is, using of course the indesign server). Basically, I want to call the Web Service of IDS (located on another machine, perhaps), spend in the input file, the conversion script and retrieve the result under the WebService call?

  Navigation on the documentation, examples, etc. in the SDK, I couldn't see how the above can be achieved unless the client manages the transfer of files. Surely I must be missing something...

  Thank you

  Chris

  What do you mean by POC?

  InDesign Server is too valuable (i.e. cost of the license) to waste his time with file transfers.

  For a smaller scale, letting a separate process (http or smb server) on the same server hardware files - InDesign Server providing access on the local volume faster.

  If you are planning for bigger, use a dedicated server for file sharing (at the choice of the SMB, NFS, or other), when the input files are prepared by the process of the client, so that your load balancing program can immediately point the next free instance of the InDesign Server farm to the file. In this case, be prepared for some trial and error - high-speed file sharing can be tricky with files written on one side not yet visible or incomplete on the other side, locking problems, filename Unicode trouble, unexpected time and so on.

  BTW, there is also a forum of InDesign Server which would be more suitable for these discussions.

  Dirk

• Plenty of data store: can I remove the complete class and add a new?

  Hi all

  We have a pool that has 4 data warehouses with one having only 15G left. I would like to know if I can delete that one full and add a new lun in the pool of data warehouses. Can I do this?

  I think I can as existing workstations will continue to live and those newly created will be created on the new Lun. I'm just curious if someone did in a live production environment. I looked in the docs but did not find any info on it.

  Kind regards...

  You should not have problems with this.   I think 15 GB free on a data store is really cut close.  Are these complete images or related clones?

  If you have found this device or any other useful post please consider the use of buttons useful/correct to award points

• need to search for files with specific text and words using the mac finder

  I find the text in PDF files but not lot of files using the finder?

  Thank you, very much appreciated. I didn't have these utilities. Yet, it is difficult for me to understand why Illustrator is so highly regarded when there a failure, once upon a time it does not have this deficiency. I am disappointed.

• Why nikon view nx2 does not work with El Capitan, and what can be done to remedy this?

  Why software nikon transfer 2 no longer work after upgrading my operating system of El Capitan iMac?

  Get in touch w/Nikon tech support and ask them.

  

• Why do I get a warning "stop character has been read" with VISA read and TCPIP?

  I use VISA readings with raw sockets TCPIP without problem with NI-VISA 3.0.1 but when I moved to NI-VISA 4.4 I was getting timeout errors.   Time-out errors disappeared when I put the stop character allow the property (which seemed to be default in NI-VISA 3.0.1) but now I get a warning indicating that the "stop character was read.

  Can I turn off this warning?   Can I put the ending character activate by default?   How can I get rid of this annoying warning?

  Hey, Dagwood,.

  Unfortunately, there is not a way to globally change the attribute VI_ATTR_TERMCHAR_EN to VI_TRUE.  Talked with R & D ability to use registers and they say that it is not accessible through that.  To answer why this change was made so the developer who made the switch isn't around more I can not find his reasoning to explain.  The best to you in your code would be during initialization, use the node property VISA to make the change and until the closure of this VISA resource, this change will be the value that you assign the value.  I'm sorry, we cannot provide any other solution for these problems.  Also, if you feel that it is a heavy load on your programming practice you can certainly submit a product idea for the ability to change the overall values for default attributes VISA.

  Thank you

• Cannot share files with Win XP and Win 7

  I want to share files on my windows 7 computer with my Windows XP computer.  I have a homegroup already put in place with my other two win 7, but impossible to connect the win xp comuter to the shared folder on the computer windows 7.  I have (been this for 8 hours and I'm usually able to understand my way through these things, but I tried without success.)  This is my last hope and then upward is actually hire someone to do it just for me.
  Windows professional XP and win 7 professional.
  all computers connected to a router and a set upwards with a network printer.

  Any help would be great.

  Thank you.

  Hello

  If your Windows XP computer is going to be part of the network you create a working group. For more details and information, you can check this link:

  Networking of computers running different versions of Windows

  http://Windows.Microsoft.com/en-in/Windows7/networking-home-computers-running-different-versions-of-Windows

  Hope it will be useful.