General questions about backup, restore, upgrade and migration

Hello

1 can restore you a backup in windows xp, vista or windows 7 to windows 8 after clean installtion of it, or which is not possible due to differences in file format!

2. What is the difference beween upgrade and migration in normal version of windows xp, vista, 7?

3. when pass you any version of windows to superior version whitout a wil stay intact messaging and data backup?

Thank you

Johan

Thanks for all the useful information, my last two questions are:

1 can spend you xp to 8 or 8.1 pro or Enterprise version?

See my answer

2. can you use the original release of windows 7 or 8 in a network of windows server environment or it must be pro, ultimate and Enterprise version?

Unfortunately not.
Comapare editions: what each restriction versions are
https://www.Microsoft.com/Windows/Business/Windows-version-comparison-chart.aspx

Upgrade to Windows 8.1 of Windows Vista or Windows XP
http://Windows.Microsoft.com/en-us/Windows-8/upgrade-from-Windows-Vista-XP-tutorial

Note: If your PC is currently provided with pre-installed XP, the processor (CPU) is perhaps not able to support any version of Windows 8 or 8.1 as 8 or 8.1 requires the CPU supported the NX bit. That one version of the Intel Pentium 4 a NX supports, if you purchased a late model XP computer comes with an Intel Core 2 Duo processor, then chances are that it supports NX.

For more information, see this post:
http://answers.Microsoft.com/en-us/Windows/Forum/windows8_1-performance/Windows-81-requires-support-for-NX/f30ec261-4378-4a31-9d46-abb7620dd5ef

Also download and run the upgrade wizard
http://Windows.Microsoft.com/en-us/Windows-8/Upgrade-Assistant-download-online-FAQ

J W Stuart: http://www.pagestart.com

Tags: Windows

Similar Questions

  • Question about backup / restore of virtual machines

    Hi all

    My guard speaks that she always save a Virtual Machine on removable USB memory before she did something to her, in case she should he recovered quickly.

    She does refer in terms of backup? and how she restore from USB flash memory card?

    And I've read a few articles on the backup and restore VMware, but nothing like she said.

    Any ideas would be great.

    See you soon

    You cannot use a USB storage connected to your host to make backups.

    Buy a compatible NAS instead.

    For the backup, see also: the backup solutions for VMware ESXi

    André

  • Question about backup Windows XP and compatible media utility

    I'm trying to back up my laptop using Windows XP Pro has anyone used this? Also, what type of backup media is the best to use my player dvd appears to play movies ok but do not write data files?

    any thoughts?
    I've been using memory sticks

    Hello

    In my opinion the best solution for the protection of the external data is external HARD drive. Especially small hard disks 2.5 placed in the little box of HARD drive. They no longer cheap and very easy to use. I use 60 GB external HARD drive and save all my important data.

  • A few general questions about records OS, ID and keys

    Discs, ID and keys

    A few questions:

    Are all the same windows installation disks?
    When I say the same thing, I mean if they are the same product, i'e two disks with Vista Basic on
    Is the product id part of them somehow?
    What's this number on the disc? or do I have reason to think that it is created by the installation and hardware on your laptop / pc
    You can use the same disc windows genuine to install the same copy of windows on two laptops, but by using laptops to separate the key product authentic?
    If someone could answer these for me I would be very grateful
    Jim

    Hello

    manufacturer's recovery disks are specific to the make and model

    You cannot use a Dell disk on an HP machine

    ____________________________________________________

    BUT, if you have a DVD of Microsoft Vista, it does not matter whether a Microsoft Retail or OEM Microsoft license disk (and I don't speak of HP OEM here, but more particularly Microsoft OEM), read this:

    Microsoft Vista DVD contains all versions of vista

    Make sure that you borrow / use the correct 32-bit or 64-bit microsoft dvd to your computer because there are 2 Vista DVD

    and this is the product key that determines which version of vista is installed

    http://www.theeldergeek.com/Vista/vista_clean_installation.html

    That's why they are purposes of resettlement used if you cannot acquire the recovery for a particular reason manufactrers discs

  • General question about the bug fixes and patches

    11.5.10 CU2 environment and I'm trying to understand how bug_id, the bug_numbers and patches are associated.
    In my case I'm looking for a certain numero_de_bogue because I was told that introduced a change in my environment.
    I can find it by querying ad_bugs but how do I determine this patch introduced this bug?

    Also, what is the association between bug_id and bu_number?

    Hello

    11.5.10 CU2 environment and I'm trying to understand how bug_id, the bug_numbers and patches are associated.

    See website for eTRM.

    http://ETRM.Oracle.com
    http://ETRM.Oracle.com/pls/trm11510/etrm_pnav.show_object?c_name=AD_BUGS&c_owner=APPLSYS&c_type=table

    In my case I'm looking for a certain numero_de_bogue because I was told that introduced a change in my environment.
    I can find it by querying ad_bugs but how do I determine this patch introduced this bug?

    You'll have to ask numero_de_bogue is ad_bugs table. For a list of each patch fixes, please see the Readme for the patch. You can also view the same OAM.

    Also, what is the association between bug_id and bu_number?

    BUG_ID is simply a sequence and numero_de_bogue stores the patch number.

    How to check if a certain Patch has been applied to the Oracle Applications instance? [443761.1 ID]

    Thank you
    Hussein

  • Question about MSD + upgrade and migration applications

    Hi all

    I am running:

    TMS 13.2

    TMSPE 1.0

    The two co reside on a Windows 2003 server, pointint in an external box of SQL.

    We also organize TCX 2.3 on our Exchange.

    Now that our server guys have * finally * installed the service pack required on the Exchange, we are ready to migrate to TMSXE but also to upgrade the TMS and TMSPE.

    So we want ot go to:

    TMS 14.2.1

    TMSPE 1.1

    TMSXE 3.1

    In addition to migrate a Windows server 2008R2 TMS + TMSPE.

    I know the different individual guides to upgrade as well as the dependencies between TMS and TMSPE/TMSXE versions.  I'm hoping to do the upgrade and migration all in one and am hoping to get some tips on the best order to do everything.

    My first question - decomission the 13.2/TMSPE server 1.1 TMS, that I can install TMS 14.2.1 and TMSPE 1.1 on the Windows Server 2008, they point to the relevant databases and allow upgrading from there? Or do I need install the new versions TMS/TMSPE on the old server, first of all, upgrade the databases and then migrate?

    Second question - before all this, I run the TMSXE migration tool to extract the data 2.3 TCX, uninstall TCX of Exchange, TMS upgrades and then install TMSXE 3.0/3.1 at the end?

    As all this is running on the virtual machine I'll instant just in case.  Advice on the issues listed above, or general advice about these upgrades would be appreciated

    Hi Nick, IMHO, I suggest you first migrate your 2.3 TCX to TMSXE 3.0.2 by this TMSXE 3.0 installation guide, and then pass the TMS and PE later.

    Yes, VM snapshot backup option before any upgrade is fine.

    BR, Mahesh Adithiyha

  • General question about the updates and version number

    I have a general question about versions and update.  I'm new on this and am in the deep end of learning I want.

    In vSphere web client, I see the following versions (these are exactly as the seller, he left a few months that I have screenshots in my documentation that match)

    Version - VMware ESXi, 5.1.0 1612806

    Profile - Dell (updated) ESXi - 5.1 - 799733 (A00)

    I am trying to familiarize themselves with the Update Manager and I noticed that there are a lot of patches and updates available.

    Lists of Update Manager 5 patches as "Missing" with Red x but directly above them are a list of patches with green tick indicating that "installed" - it is perhaps obvious, but im guessing 'installed' means really installed when displayed on the screen - there is an update installed, labeled "ESXI 5.1 all the update 2-' would be able to tell that it has been installed by the details of profile/version above?

    I don't think it's a big deal at this stage, but if I install all missing patches and then the details of the version/profile change in summary screen?

    I hope this makes sense.

    Thank you

    This article allows to correlate the updated version: products VMware correlating build numbers to update levels (1014508)

  • General questions about errors in eventvwr

    Greetings.

    I have a general question about some failed modules are stored in the Windows Event Viewer.

    An error leading to the crashes some applications that I've seen several times now when supporting computer problems is something like this:
    (Windows error reporting) Fault bucket, Type 0, name of the event: PCA2, (...) P1: application.exe, (...)

    I wonder what this 'PCA2. Which is a kind of module Windows handles tasks such as allocating memory or smth. Like this? What could be the cause of these errors (physical memory problems / corrupt swap file / insufficient rights?)

    Same Question for the application falls down because of "kernelbase.dll" as in:
    (Application error) Failing application: application.exe, Version: 0.0.0.0, (...) Failed module: KERNELBASE.dll, Version: 6.1.7601.18015, (...) Path of the failing module: C:\Windows\syswow64\KERNELBASE.dll (...)

    What is the .dll file and what could possibly cause kernelbase.dll Fault?

    The application can be a bit buggy, but I wonder what could possibly cause these accidents and if there is a way to fix these problems - or what dev did wrong.

    The two errors occur mainly on x 64 systems - especially Windows 7/vista

    Kind regards

    With application errors, the application is called everything first and the module he collaborated with is named second. Normally you should try to reinstall the application if you see not to repeat the mistakes. If this does not work, you go to the forum on the application to see if other users see the same error. There may be a bug in the application.

    The observer of the Application event log contains Information reports (event ID: 1001) for errors where the details were sent to Microsoft for review. You will find that there are corresponding to the event ID: 1000 reports errors, either in the system or Application logs. These reports are also included in the center of the Action. Center type action in the area of research above the Start button and press ENTER. Click on the arrow pointing downwards to the right of Maintenance, and then click view reliability history. The errors reported are the Red orbs with a white cross. You can search for solutions to problems, but occasionally you get a significant response from Microsoft.

    I can't tell you what it means PCA2. Google did not find a significant result. The reports themselves are not unintelligible, although I have never tried to understand the meaning of a particular report. I have extracted what, in my view, is a starting point of two reports:
    Event name: PCA2 = P1: motherboard_utility_onoffchargesetup.exe P2: 4.65.0.0

    Event name: PCA2 = P1: setup.exe P2: 11.0.0.28844

    You have the app in the boredom and the version of the file. These details have been extracted a file of information system to a computer with a card mother Gigabyte. So, you see I have a starting point, if I wanted to determine the cause of a failure.

    I will say before you go dive deep into each event ID: 1001 report that many are not easy to even begin to understand. However, they can provide useful clues.

    KERNELBASE.dll is likely to be the module with which the application works. You need to focus on the application.  KERNELBASE is probably preceded by P3 or P4 in the report?

    General remarks on the event viewer:
    http://www.gerryscomputertips.co.UK/syserrors5.htm

  • Upgrade and migrate from 9.3.1 to 11.1.2.2 - Please suggest

    We plan to upgrade and migration of 9.3.1 to 11.1.2.2

    Modules: HFM and FDM

    Could you please suggest a better way to do it?

    Details:

    1. whether to go 11.1.2.2 fresh install ?

    2. What are the material and the requirements of the system S/W?

    3. other difficulties?

    4. If we opt for the upgrade 9 to 11?

    5. equipment & system S/W required? and the steps to do it?

    Migration of the 9th version HFM and FDM app 11

    6. What are the best way to do it?

    Kindly help me!

    Note: Please do not refer read me the Oracle links (Introduction - Oracle EPM System 11.1.2.2 Documentation Library) docs. need your valuable suggestions.

    Thank you

    Hello

    My first question is why 11.1.2.2 and not 11.1.2.3? 11.1.2.3 seems to solve a lot of 11.1.2.2 questions.

    1. my first answer would be for a new installation because you have to use the latest OS and hardware... If you're on Hyperion 9, you must have Windows 2003 server and at least 5 years equipment, correct?

    2 check the Oracle documents

    3. There are a lot of challenges at the level of the application, but this depends on your application works. Not all users have the same apps and therefore do not have the same questions.

    4. you will need to install a 11.1.1.4 system for the upgrade of the application, but you have to move to 11.1.2.x

    6. I suggest you build a new application with a new design... just upgrade an older application will not use the last HFM/FDM modules...

    Kind regards

    Thanos

  • Upgrade and migration of V11.1.1.3 to V11.1.2.2

    Hi all

    Currently, we use Hyperion Essbase Server V11.1.1.3 in Windows Server 2003 R2.

    We are in a plan to upgrade and migrate to Essbase V11.1.2.2 server in Windows Server 2008.

    We use only Essbase w/o Shared services.

    Could you please provide me with the following information:

    (1) the question of whether LCM Utility can be used to perform this upgrade and Migration of V11.1.1.3 to V11.1.2.2 (do not use Shared Services)?

    (2) any of the documents w.r.t. this upgrade and Migration using the LCM?

    Kind regards
    Swathi.

    LCM is part of Shared Services, so if you do use shared services, so you won't be able to use.

    See you soon

    John

    http://John-Goodwin.blogspot.com/

  • A question about the restoration of cold backup (backup of control file is not clear)

    Hello

    I had another question about restoring from backup to cold. My database is in noarchivelog mode and after that take a consistent backup of cold, all I have to do is restore the backup right? -Why I got this question is because: when I save my control to trace file, I see statements like this: -.
    -Orders to recreate the table of the incarnation
    -Under journal names MUST be replaced by names of existing files
    -disc. The log files from each branch can be used for
    -re - create the folders of the incarnation.
    -LOGFILE of REGISTRY ALTER DATABASE ' / uo1/app1/arch1_1_647102958.dbf';
    -Recovery is required if any of the data files are restored backups.
    - or if the last shutdown was not normal or immediate.
    RECOVER THE DATABASE
    -Database can now be opened normally.
    ALTER DATABASE OPEN;
    -----
    My database is in noarchivelog mode now so don't know why these statements (of the registry the logfile) is there in the backup of the control file? so when I restore the cold backup of this database, it will still work OK? (there is no log file I only have the CRD files in cold don't backup - no log file archive.)

    Thank you
    Cedric

    It is a generic message in trace control file. It's not affect you.

  • Design question about backups and RMAN

    I am pretty green with RMAN and need happen to a backup process that fits within my environment who are:

    (1) disc can hold the PLUS 1 full backup and the value of the day of archive logs
    (2) tape can hold up to 30 days of archive logs and backup complete for the whole duration so
    (3) our tape backup solution don't play nice with RMAN so the method we use is THAT RMAN writes to disk and our copies of backup tape from a location on the tape drive.

    What I want to do is trick recovery catalog thinking 30 days ago or more games of backup to disk, while having only a day on the drive actually. Is this a smart move, or can I keep the catalog of recovery in harmony with what is on the disk (so keep backups on disk only in the catalog) and if I need to come back in 2 days or more in the past, re-Catalog backup sets restored a strip (if that is even possible)?

    Thank you

    John

    CJohnRun wrote:
    I am pretty green with RMAN and need happen to a backup process that fits within my environment who are:

    (1) disc can hold the PLUS 1 full backup and the value of the day of archive logs
    (2) tape can hold up to 30 days of archive logs and backup complete for the whole duration so
    (3) our tape backup solution don't play nice with RMAN so the method we use is THAT RMAN writes to disk and our copies of backup tape from a location on the tape drive.

    I also have a similar setup at my end taking the RMAN backups on drives and back up tapes. But in my case, I supported the RETENTION POLICY to REDUNDANCY 2. So full backup which is more than 2 copies is removed.

    What I want to do is trick recovery catalog thinking 30 days ago or more games of backup to disk, while having only a day on the drive actually. Is this a smart move, or can I keep the catalog of recovery in harmony with what is on the disk (so keep backups on disk only in the catalog) and if I need to come back in 2 days or more in the past, re-Catalog backup sets restored a strip (if that is even possible)?

    In your case, as you said, you have 2 options:
    1. simply delete the backups on disks (as they were already saved to tapes) and a full backup. Here, you will not run an OVERLAP as well as no. invalidate the old backups in the catalogue, or recovery

    2. maintain RESTRAINT POLICY to REDUNDANCY 1, whereby your recovery catalog has accurate status on the backup information. In this case, you must keep the AUTOMATIC backup with your full backups in the bands. If you lose you will have troubles recoveing the backup of this day.

    In my opinion the 2nd option is preferable, although you have to recataloguer to use it. I tested how recovery with this situation on my blog at: http://oracleendeavor.blogspot.com/2010/02/disaster-recovery-using-rman-backups.html

    HTH

    Kind regards
    Z.K.
    http://oracleendeavor.blogspot.com/

  • Recently bought a laptop computer; A few questions about the offer Upgrade to Windows 8

    I have a few questions about the Upgrade of Windows 8 offer for new computers.  I recently bought a Toshiba Satellite S855-S5268 of amazon.com, which came with Windows 7 Home Premium.  Toshiba already has a beta version of drivers and utilities for Windows 8 for the S855 on their Web site.

    (1) I bought my laptop in July of this year, and I've not yet registered for 8 Windows Upgrade offer with Microsoft.  Am I still eligible to receive the upgrade, if I sign up soon?
    (2) if I buy the upgrade through this offer, I'll be able to download an ISO file so I can burn the installation media, or do I need to upgrade to Windows 7?
    (3) if I will be able to burn the installation media, I'll be able to erase my hard drive and do a clean install of Windows 8 (which I'd rather do, I have a lot of backups of my data).  I am aware that I would probably need to provide my product key Windows 7 Home Premium 64-bit OEM during the new installation, because it is an upgrade and not a full version; This isn't a big deal, because my Windows 7 Home Premium 64-bit OEM product key is stuck at the bottom of my laptop.
    (4) my current copy of Windows 7 is activated by seeing my BIOS (I have a traditional BIOS, not a UEFI).  If I had to switch to Windows 8 and decide then I'd rather back in Windows 7, for example, a few months later, I'll be able to do that (I burned recovery of Windows 7 with the Toshiba utility disks, which I did), and Windows 7 will continue to activate by seeing my BIOS, even after the installation (and later remove) Windows 8?
    Thank you very much!

    I have a few questions about the Upgrade of Windows 8 offer for new computers.  I recently bought a Toshiba Satellite S855-S5268 of amazon.com, which came with Windows 7 Home Premium.  Toshiba already has a beta version of drivers and utilities for Windows 8 for the S855 on their Web site.

    (1) I bought my laptop in July of this year, and I've not yet registered for 8 Windows Upgrade offer with Microsoft.  Am I still eligible to receive the upgrade, if I sign up soon?
     
    Yes, the registration period is between June 2, 2012 to January 31, 2013.
    (2) if I buy the upgrade through this offer, I'll be able to download an ISO file so I can burn the installation media, or do I need to upgrade to Windows 7?
     
    Yes, the Upgrade Wizard of Windows 8 will allow you to create a bootable DVD or you can grab the ESD file and save it.
    (3) if I will be able to burn the installation media, I'll be able to erase my hard drive and do a clean install of Windows 8 (which I'd rather do, I have a lot of backups of my data).  I am aware that I would probably need to provide my product key Windows 7 Home Premium 64-bit OEM during the new installation, because it is an upgrade and not a full version; This isn't a big deal, because my Windows 7 Home Premium 64-bit OEM product key is stuck at the bottom of my laptop.
     
    Yes and there are better ways to reinstall Windows 8 without using the installation disc, you can use the reset and refresh.
     
     

    These steps will take you through refreshing your PC:

    · Press the Windows key + C on your keyboard to show the charms (if you use a touch screen: touch the right edge of your screen and drag your finger to the left)

    · Click settings

    · Click change PC settings

    · Click general in the left column

    · Under refresh your PC without affecting your files, click Start

    Then follow the instructions that will be provided on-screen to cool your PC.

    (4) my current copy of Windows 7 is activated by seeing my BIOS (I have a traditional BIOS, not a UEFI).  If I had to switch to Windows 8 and decide then I'd rather back in Windows 7, for example, a few months later, I'll be able to do that (I burned recovery of Windows 7 with the Toshiba utility disks, which I did), and Windows 7 will continue to activate by seeing my BIOS, even after the installation (and later remove) Windows 8?
     
    As long as you have a recovery disk which you should create or use the construction in the recovery partition, Yes, it will self activate.
    Thank you very much!
  • Upgrade and migrate to the new CARS without DBUA

    I was passing through many different papers, reference materials, updating guides and similar. A common theme I see is that they usually keep saying that CCR DBUA is STRONGLY recommended for environments and a must (or almost) during the upgrade in a CCR environment. Since I am also migrate to a new server I can't use DBUA.

    I've never done an upgrade or migration in a CCR environment, so what I need is a little guidance.

    So I have a 10.2.0.4 database in a RAC environment and we are moving it to a 11.2.0.3 RAC environment. A method I'm considering is to activate the 11.2.0.3 CARS system to access the 10.2.0.4 file system and perform the upgrade using the command line Interface. So my question is can I put starting to upgrade the database under the 1 single node or several nodes? I have yet to find the right document, I'm sure I'll find it eventually, but advice would be greatly appreciated.

    Thank you
    Tim

    I made a few updates to RAC and prefer not to use DBUA. Especially because the upgrade without that it is not very difficult and the resolution of problems with manual updates is a lot easier to find out why DBUA complains...

    To your question:

    When you run 'start upgrade' make you on a single node. The upgrade process upgrades the database, which is shared between all nodes.

    Remember that before you 'start upgrade', you define CLUSTER_DATABASE = FALSE in your SPFILE, stop all nodes, then just run one to perform the upgrade. Search Support Oracle for more detailed instructions.

  • A few questions about integration between POET and EBS

    Hi you
    I am a new bie BIEE. In those days, have a look at the POET architecture and BIEE components. In the next project, there is some work on the development of POET based on request of the EBS. I have a few questions about integration:

    (1) generally, the POET application and database server is decentralized with application and database EBS? Both BIEE 10g and 11g version can be integrated with EBS R12?

    (2) in the POET administration tool, the first step is to create arrays of physics. If the source application is EBS, is it still necessary to create the physical tables?

    (3) if the physical creation of tables is needed, how to transfer data from the source of BSE BIEE physical tables tables? What ETL tool is preferred for most of developers? generator for warehouse or Oracle data integration?

    (4) during the data transfer phase, there are many many large data to transfer, how to keep the entire? for example, it must transfer 1 million lines of source to physical tables BIEE database, when 50% is completed, users try to open the POET report, they can see the new data of 50% on the reports? is there some transaction in phase control ETL?

    could someone give some pointers for me? I am very appreciated if you can also provide any other information.

    Thanks in advance.

    (1) generally, the POET application and database server is decentralized with application and database EBS? Both BIEE 10g and 11g version can be integrated with EBS R12?

    You shud look at OBI request here that uses OBIEE as a tool for reporting with pre-built modules. 10g & 11g comes with different versions of the applications of BI that supports sources such as Siebel CRM, EBS, Peoplesoft, JD Edwards, etc...

    (2) in the POET administration tool, the first step is to create arrays of physics. If the source application is EBS, is it still necessary to create the physical tables?

    His independent of any source. It comes to OBIEE modeling to create the RPD with all the layers. If you build from scratch, then you will need to create all layers else if BI Apps is used so you can get pre-built RPD and other pre-designed components.

    (3) if the physical creation of tables is needed, how to transfer data from the source of BSE BIEE physical tables tables? What ETL tool is preferred for most of developers? generator for warehouse or Oracle data integration?

    BI apps comes with ETL pre-built mapping to use with the tools majorly with Informatica. Only applications BI 7.9.5.2 comes with ODI, but oracle has the intention of having only ODI for any other versions.

    (4) during the data transfer phase, there are many many large data to transfer, how to keep the entire? for example, it must transfer 1 million lines of source to physical tables BIEE database, when 50% is completed, users try to open the POET report, they can see the new data of 50% on the reports? is there some transaction in phase control ETL?

    User will see still old data because its good enable Cache and serving it after each load.

    See http://www.oracle.com/us/solutions/ent-performance-bi/bi-applications-066544.html...
    and a lot more docs on google

    Hope this helps

Maybe you are looking for

  • Why does the Yahoo toolbar on the 38 version? I have only a quick link, mail.

    It's exactly the same problem with previous versions, the people were from. I've done all the tips provided to support, and it is NOT FIXED! It is EXTREMELY annoying. I liked my Firefox until this happened. More than a little disappointed.

  • Synchronization of entry OR XNET

    I have a more general question. I'm new on CAN interface and I just try to understend better functioanlity of NOR-XNET entry vi. MY main problem is that when I ran vi by itself, it worked very well. Read all images sent my MCU. When I put the same vi

  • Hi, does anyone know why my windows xp went nuts when I tried to down load yahoo messanger

    I can't download more or use the apps I downloaded / internet Explorer works I can get help or use any rich thanks system tools

  • Operating system crashed

    Hello! IM arlene, my hp laptop began to slow down and start to display the files and folders crashed and when im trying to delete recycle bin cannot access or delete. Now Im trying to reformat it by myself, but it started to freeze in step "Configura

  • Error of Muse: instantiate UID, outside the legal range?

    HelloHas anyone seen this warning before? She suddenly appeared her to stop Muse. I'm trying to get a menu with a nav by working overtime, a free widget that I found online called "menu-horizontal - macdonald.muse. I significantly restyled the NAV us