General questions Apple TV

Having never owned an Apple TV but the last generation interested I have a few quick questions please:

1. it is quite easy to move and AppleTV to another network? For example, I go to a different State for the holidays and would like to take with me to use. Are there problems with transfer to another network for a few days?

2. I'm working on a slide show for the family. Can I transfer the .mov finished on TV and run all from the TV? As with the #1 question, would there be any problems of transfer to another network?

3. I can airplay the browser? I know that exit about Spotify or another music service I can't, but there are problems with the browser?

4. Finally, I know that I can see the photos via Apple TV, but it shows all on photo streams or I can individually choose which ones to display? I have some pictures I want to show, but maybe some I don't want to everyone to see.

Concerning

  1. No real problem, need you no more than a minute or two to enter the new password networks (he doesn't remember networks)
  2. The Apple TV is not keep your content on it, she it broadcasts from the internet or your computer. You could take your computer with you if it is portable, you can also if you have an iPad or an iPhone, you can read the film here and stream (AirPlay) for the Apple TV.
  3. Yes you can AirPlay browser,
  4. In addition to p [hoto stream he plays also shared albums, then Yes, you can select what is seen. You can also view the photos that are on your computer.

Tags: Apple TV

Similar Questions

  • A general question to the community

    I have a general question to the forum community. I noticed that many contributors have more than 100,000 points. I'm a contributor forum for several years, I consider myself to be a casual user and offer contributions to daily or occasionally and then my answer is chosen as the solution. Not that it's really important to me because I love just to help others. However, unless a person is right in front of their computer constantly on the communities of Apple I for the life of me see how a person could possibly reach more than 100 000 points. Y at - it a secret that I don't know?

    No, I think you worked which is the secret.

    TT2

  • Camileo load problem (solved) and a general question!

    Hi all!

    First of all, I was going to ask for help as to why the Camileo S10 wasn't supported (the orange light was not blinking) and I had seen a few people with similar problems.
    The solution?

    Give the contacts of the battery clean.
    The sticker of insulation that comes on it must leave some kind of residue on it, and just avoid the charges. [Now it blinks far fortunately:]

    So my general question was, is it possible/desirable to use the camera on the network?
    Instead of constantly drain and recharge the battery during long shoots, I prefer to leave it plugged!

    Thank you very much in advance!

    Paul

    Hello

    I think that the handling of the battery is always the same, regardless of what product it is
    From time to time the battery must be recalibrated.

    This means that the battery should be completely discharged and then after you need to load it again until the battery could reach 100%

    I do this with all my batteries; laptop battery, laptop battery and battery of digi cam.

  • Order General questioning of IEC 60870-5-104

    Dear all,

    I use the NI Communications toolkit to create slave IEC 60870-5-104 (station controlled).

    I use s/w of Triangel microworks part and use it as the master for the same. I am able to send and receive the bulk of orders with the examples provided with the Toolkit to "C:\Program NIUninstaller Instruments\LabVIEW 2012\examples\IEC60870-5,

    I am not able to find a way to capture the "questioning general command" from the server.

     

    Can someone help me how to proceed with this.

    Thank you.

    Hi Frabto,

    The development team has had some great insights below. I have bad informed you (sorry!) behavior, that the command general question should be processed automatically in the communication stack.

    First the order of query sent to control the station may request the complete(station interrogation) or a subset (group interview) of all the data points on the control station. NEITHER 60870-5 to the command station supports the command when the control station receives an order of questioning of the station, it will reply with all the values of the data points. If the Group interrogation command, it will reply with the values of the data points that belong to the group. Users are not able to detect whether the query command is received or not, is automatically handled inside the battery, it allows users of the VI called "Set Group.vi" inside the VI polymorphic "set Property.vi" to set a point to be one of the 16 groups and you can see the usage with the example 'Interrogate information in Group.vi objects' in the folder of the example 60870-5.

    You shouldn't need to do anything to respond to a command of the interrogation. The station will automatically answer. I hope that I did not cause you too much confusion on this point.

  • Some General Questions of CVI - how does the compiler

    Hello

    I work with CVI 9.1 for more then a year during this time i ' v noticed a couple things, I would like to help me to understand.

    1. Work with several C files:
    • When I'm writing a software that uses lets say C files and files of 10 H 10: Main.c Main.h File1.c File1.h Panels.h Panels.uir and so on... I'm implementation of the function in the c file and its deceleration of writing in the file h, i ' v noticed that sometimes I get msgs of the compiler on the conflicts, maybe there's a way I know not just for the CVI?
    • Works correctly with the file UIR for example lets take the files written above, if I have sign - HAND and control led1 and I want to do SetCtrlVal in the Main.c I can implement as this SetCtelVal(MAIN,MAIN_LED1,1); but when I go to file1.c and try to do it, I get the error message that main_led1 is not a control value (I included the Panels.h) this problem happens to me a lot is there a solution? or maybe I am doing something wrong...
    • What is the best way to implement bollean var (true false) for the software? is it possible to add this var always?
    • decelerations of incompatible type: allows you to take the Fmt function for example when I'm trying to use it in another file, I get the decelerations of incompatible type with the names of the files...
    • General question: lets say I want to include in my project and I want to use its features in main.c and file1.c, I included in two files? or there is a way to include it in a single file only?

    2. to access the buttons

    • lets say that I have buttons and I am pressing on it after pressing the button I have a loop for 10 min, I want to create a button give up, but I can't press anything because the keys are "locked out" is there a way besides multi threading to implement this?

    Wow! A very broad set of issues!

    A quick response.

    • Works correctly with the file UIR for example lets take the files written above, if I have sign - HAND and control led1 and I want to do SetCtrlVal in the Main.c I can implement as this SetCtelVal(MAIN,MAIN_LED1,1); but when I go to file1.c and try to do it, I get the error message that main_led1 is not a control value (I included the Panels.h) this problem happens to me a lot is there a solution? or maybe I am doing something wrong...

    There is a basic error in your statement: the first (SetCtrlVal) parameter must be the handle Panel, which is the reference to the object in memory that is created when you call LoadPanel (). Using the name of constant sign is not correct: it may work if you're lucky and you have the Panel handle with the same value as the name of the constant, but this certainly isn't the correct way to address on a panel controls.

    Even if I don't understand the error that you declare: I expect 'the control is not of the type expected by the function' or an error of inconsistent data type (like passing an int to double check) or...

    Remember that each function that processes objects on a Panel must be aware of the handful of Panel, then either you pass to the function as a parameter, or store it in a global variable.

    • decelerations of incompatible type: allows you to take the Fmt function for example when I'm trying to use it in another file, I get the decelerations of incompatible type with the names of the files...

    I normally leave CVI #including the necessary system files: when I use certain functions like Fmt in a source file and compile ICB warns me to add the relevant include file, and it does it correctly. Operating in this way I never had problems with formatting and the I/o library functions. You can rebuild the inclusion list by removing all #includes in yous source files and compilation of the project, this should correct errors

    • General question: lets say I want to include in my project and I want to use its features in main.c and file1.c, I included in two files? or there is a way to include it in a single file only?

    You must include the file containing the definitions of the functions in all source files that use. Or you can create a general include file with all included in your project and include only this one in all of your source files

    • lets say that I have buttons and I am pressing on it after pressing the button I have a loop for 10 min, I want to create a button give up, but I can't press anything because the keys are "locked out" is there a way besides multi threading to implement this?

    It is a general rule that animates the CVI environment: during the execution of a loop inside a function (a reminder of command or another function) the system does not handle the user interface events, so that your buttons appear locked. This can be solved by adding a call repeated (ProcessSystemEvents) inside the loop: this way of all UI events are monitored and managed by the system.

    You must use this method with caution: before entering the loop, you must disable all the controls that can be used during operation (normally only the Quit button should stay active) otherwise, you can enter a situation in which other callbacks are executed during the loop that might interfere with it.

    In such a case, do not put a reminder in the stop button and the use of a global variable I have normally create a toggle button Stop and manipulate it in this way:

    While (1) {}

    ....

    ProcessStemsEvents ();

    GetCtrlVal (panelHandle, PANEL_STOP, &stop);)

    If {(stop)

    ... gracefully out of the function

    break;

    }

    }

    This argument has been discussed several times in the forums: do a search for ProcessSystemEvents returns a large number of discussions you can read

    • What is the best way to implement bollean var (true false) for the software? is it possible to add this var always?

    CVI is not a native boolean value. I used to use an int and test weather it is zero or not

    • When I'm writing a software that uses lets say C files and files of 10 H 10: Main.c Main.h File1.c File1.h Panels.h Panels.uir and so on... I'm implementation of the function in the c file and its deceleration of writing in the file h, i ' v noticed that sometimes I get msgs of the compiler on the conflicts, maybe there's a way I know not just for the CVI?

    I do not understand what you describe: could you add some piece of code allowing to penetrate this situation and report exactly the message the compiler warns?

  • General questions about errors in eventvwr

    Greetings.

    I have a general question about some failed modules are stored in the Windows Event Viewer.

    An error leading to the crashes some applications that I've seen several times now when supporting computer problems is something like this:
    (Windows error reporting) Fault bucket, Type 0, name of the event: PCA2, (...) P1: application.exe, (...)

    I wonder what this 'PCA2. Which is a kind of module Windows handles tasks such as allocating memory or smth. Like this? What could be the cause of these errors (physical memory problems / corrupt swap file / insufficient rights?)

    Same Question for the application falls down because of "kernelbase.dll" as in:
    (Application error) Failing application: application.exe, Version: 0.0.0.0, (...) Failed module: KERNELBASE.dll, Version: 6.1.7601.18015, (...) Path of the failing module: C:\Windows\syswow64\KERNELBASE.dll (...)

    What is the .dll file and what could possibly cause kernelbase.dll Fault?

    The application can be a bit buggy, but I wonder what could possibly cause these accidents and if there is a way to fix these problems - or what dev did wrong.

    The two errors occur mainly on x 64 systems - especially Windows 7/vista

    Kind regards

    With application errors, the application is called everything first and the module he collaborated with is named second. Normally you should try to reinstall the application if you see not to repeat the mistakes. If this does not work, you go to the forum on the application to see if other users see the same error. There may be a bug in the application.

    The observer of the Application event log contains Information reports (event ID: 1001) for errors where the details were sent to Microsoft for review. You will find that there are corresponding to the event ID: 1000 reports errors, either in the system or Application logs. These reports are also included in the center of the Action. Center type action in the area of research above the Start button and press ENTER. Click on the arrow pointing downwards to the right of Maintenance, and then click view reliability history. The errors reported are the Red orbs with a white cross. You can search for solutions to problems, but occasionally you get a significant response from Microsoft.

    I can't tell you what it means PCA2. Google did not find a significant result. The reports themselves are not unintelligible, although I have never tried to understand the meaning of a particular report. I have extracted what, in my view, is a starting point of two reports:
    Event name: PCA2 = P1: motherboard_utility_onoffchargesetup.exe P2: 4.65.0.0

    Event name: PCA2 = P1: setup.exe P2: 11.0.0.28844

    You have the app in the boredom and the version of the file. These details have been extracted a file of information system to a computer with a card mother Gigabyte. So, you see I have a starting point, if I wanted to determine the cause of a failure.

    I will say before you go dive deep into each event ID: 1001 report that many are not easy to even begin to understand. However, they can provide useful clues.

    KERNELBASE.dll is likely to be the module with which the application works. You need to focus on the application.  KERNELBASE is probably preceded by P3 or P4 in the report?

    General remarks on the event viewer:
    http://www.gerryscomputertips.co.UK/syserrors5.htm

  • Smartphone Newbie question blackBerry - general question on the synchronization of e-mail

    Hello

    I have a general question about the synchronization of e-mail and BlackBerry smart phones.  Y at - it none of the devices that enable E-mail synchronization with Microsoft Exchange 2007 system not requiring BlackBerry Enterprise server?

    Thank you; Sorry if this has been asked before but I was unable to find it in the forums, documentation, etc.  Guess what I found for this kind of environment, you will use a BlackBerry Enterprise solution, but I can't assume.

    Thanks again.

    The short answer is no - BB using a different methodology than the use of WM. BB Push, WM uses (for most) sweater. As a result, the long answer...

    BB uses a server solution - it's called the BlackBerry Internet Service (BIS) and it is hosted by your carrier. As an ENCORE, you create a BIS account, then create configurations for different emails, save your credentials for each e-mail account with necessary configuration items (as an ENCORE) (name of the server, the special ports, etc.). Then, BIS periodically checks your mail servers (about every 15 minutes) for any changes on the server that are required on the BB - only, so it generates traffic to your BB to expel these changes. If there is nothing that need to come to the HH, there is no traffic on the network of the carrier.

    WM, on the other hand, devices use (for the most part - there are exceptions) a technology pull... the device itself asks your e-mail servers for changes that need to come to the HH. This generates more traffic on the network of the carrier that the action of the poll itself generates traffic, even if there is nothing to come to the HH.

    Another distinction is the notion of synchronization - in the vernacular WM, it means that what makes your Inbox to the server mailbox and your lines of mailbox HH of the each other for everything (items old and new)... In the vernacular of BB, what is happening is the reconciliation of the new features and changes. But the old elements aren't coming for BB... only news of the moment of activation.

    Another distinction is just what reconcile to a BB - new, remove, read/unread, saved, etc. Which varies according to the messaging service... see this KB for more information:

    • KB05133 Features of the BlackBerry Internet Service email reconciliation

    Hope that helps!

  • General question about the updates and version number

    I have a general question about versions and update.  I'm new on this and am in the deep end of learning I want.

    In vSphere web client, I see the following versions (these are exactly as the seller, he left a few months that I have screenshots in my documentation that match)

    Version - VMware ESXi, 5.1.0 1612806

    Profile - Dell (updated) ESXi - 5.1 - 799733 (A00)

    I am trying to familiarize themselves with the Update Manager and I noticed that there are a lot of patches and updates available.

    Lists of Update Manager 5 patches as "Missing" with Red x but directly above them are a list of patches with green tick indicating that "installed" - it is perhaps obvious, but im guessing 'installed' means really installed when displayed on the screen - there is an update installed, labeled "ESXI 5.1 all the update 2-' would be able to tell that it has been installed by the details of profile/version above?

    I don't think it's a big deal at this stage, but if I install all missing patches and then the details of the version/profile change in summary screen?

    I hope this makes sense.

    Thank you

    This article allows to correlate the updated version: products VMware correlating build numbers to update levels (1014508)

  • Very general question VMWare Workstation

    Hi all

    So I have a very general question of VMWare Workstation.  Here's the context: I am with a very small company and we do desktop for windows software.  My development computer running Windows7, and I have an XP Virtual Machine to the test on this platform.

    However, I would like to test the deployment and operation of my software on different versions of Windows 7, Vista, XP, etc.  However, our society cannot afford to spend $1000 on all versions of Windows, we can find.

    Are there operating system free everywhere (which is legal) images that are intended to be used by developers?  Or, you must purchase a full license for all of these operating systems, just to do a little testing?  How do you all your images of BONES?

    I know that this is a very general question (and not technology), but I would appreciate any input all have just general experience.

    Thank you!

    Dan

    MS offers subscriptions MSDN and Technet, containing all kinds of licenses for the use of test and development - according to the level.

    André

  • General questions After Effects

    Hi all

    I have some general questions of After Effects:

    -J' bought some model videohive.net and when I open it, legacy projects

    converts them. It of quite OK, but is it the the ability to hide this message.

    -I'm a bit confused on "after effects multiprocessing. It took me about 3 hours to search the

    NET to know, that I still have no idea if I should active it or not. It comes to my computer:

    PhenomX4 955 (Quad Core) AMD

    8 GB RAM

    60 GB SSD

    Windows 7

    NVIDIA GTX 580

    Should I use multiprocessing? Currently my settings under "Memory & multiprocessing" are

    "Reserved for other applications of RAM: 1.5 GB" (available for AE 6, 5 GB)

    "Reserved for other applications processors: 0".

    "Allocation of RAM per CPU of background: 2GB.

    "Real CPU that will be used: 2.

    When I work in After Effects, I don't use other programs at the same time.

    In addition to these questions, I am very satisfied with this product!

    Probably not, but it depends on the plug-ins used in the project.

    For MP to work you need to at least 2 GB by heart, but you can not say what setteings are the best unless you try some different combinations. Set up a test project that is typical of your workflow that only lasts about 5 seconds. Try a few different settings about allocate 2 GB for each CPU (in the RAM available for the AE control). The interface is a little confusing, but here's a configuration that works on my laptop.

    Take a look at the RAM reserved for other applications, the CPU for other applications and the allocation of Ram per CPU background. I use as much ram as I can for AE but leaving a 1.5 GB for other applications. This leaves 6.5 GB available for Adobe applications. If I let 2GB for other applications and he leavs 6 Adobe which is right on the edge of breakdown 3 processors. If I put select 2 GB of Ram processor used actual distribution falls to 0 and make once we pass 01:17 by MP 2 minutes offshore. If I try to return all 4 cores my render time is the best time of 48 seconds at 58 with no other apps open. This represents an increase of about 20%. If I switch to another application while rendering with all 4 cores used to render times will at 01:48. Remember that the render time for my test with off multiprocessing computer is 01:17 so MP allows for most of the projects.

    I guess the point is that you should pay attention to what happens to the actual CPU used and run tests. As I said at the beginning, some effects are not aware of MP and allowing of multiple chassis treatment can slow down the system or cause a malfunction.

    I hope this helps.

  • Drive the General Question of the layout - Interface user - fields and color

    Can general question if possible to do or not, we do a field in color similar to the Red required fields?

    Change the color of text or field only is not supported by OnDemand now

  • General questions about the iphone compatible hearing aids, please?

    I am a seller of oil field that moves and I need my first hearing aids.  I have loss of hearing with a classic old guy and it's average but I'm late for h / a. I'm missing an important part of my life and want to hear the birds sing again!  I currently use a 5 s with 9.2 and a bluetooth Plantronics traveler legend.  I have hands free for safe driving and especially for taking notes of value and wear it all day.  I don't listen to music or videos, no vehicle bluetooth and any other iOS device.  The goal is good h/a and the use of good phone.

    I am interested in the Halo of Starkey and research scared me a bit of the questions that I barely understand!  Googling found a lot of comments, but they seem to all written by agents of sale or competitors.

    Where is the microphone bluetooth on the Halos?

    Is the call phone stereo or mono?

    The function of the hearing aid remains so that on the phone?

    In light of my basic needs, all warnings other than the stupid of these things cost?

    I am also considering a 6s, this would be a better phone for the Halo team?

    Prone glitch or awkward iphone apps?

    I'm bored of conversation in the meeting rooms, restaurants are tough and shows are terrible for the hearing?

    Generally you are happy with new h/a and halos in particular.

    Everything is provided with a newbie would not recognize that you like?

    Let me know if you need more details.

    Where is the microphone bluetooth on the Halos?

    --> The microphone's upstairs behind the part of the ear. If you use the Halos as your ears "on the phone", you still talk in the phone's microphone.

    Is the call phone stereo or mono?

    --> Is not true stereo, but you will hear the call through two hearing aids.

    The function of the hearing aid remains so that on the phone?

    --> You can leave the active hearing aid microphones or cut them. It's your choice.

    In light of my basic needs, all warnings other than the stupid of these things cost?

    --> Feel free to test-drive a few models, unless the first really works well for you.,.

    I am also considering a 6s, this would be a better phone for the Halo team?

    -->, I can't comment on that, except to say that my experience with multiple iPhones over the years that I have great confidence that each new model is better than the previous. There are a few bumps on the road, but Apple is good enough, solve them. YMMV

    Prone glitch or awkward iphone apps?

    --> Not, in my opinion.

    I'm bored of conversation in the meeting rooms, restaurants are tough and shows are terrible for the hearing?

    --> Which has not changed for me. It is the nature of sound amplification without being able to directly select that sounds to amplify and to mute.

    Generally you are happy with new h/a and halos in particular.

    -->, I am very happy.

    Everything is provided with a newbie would not recognize that you like?

    --> I like the ability to define a 'from' sensitive geographically, where you can control the volume up down and the bass/treble back. It is a crude tool, but it works.

  • Question questions Apple ID management and security

    Tponging, on my iPhone, a message appeared on the screen to say that my ID was used to connect to iMessages and FaceTime on my "ipad3. I don't have a device called 'ipad3', so I was naturally suspicious. First question - can you be spammed by screen pop up? It wasn't an email but a message on the screen that displayed randomly.

    So I decided, to be on the safe side, I try and change my Apple ID. I managed to access the page "manage your Apple ID", but after several attempts to try to guess the answers to the questions of ID I do not even create, I was told I had used "too many attempts and now my account is blocked." I tried after contact with advice from Apple on another post on the forum, but the contact for the United Kingdom led to a page that says ' we are not available right now, please try again later ". So how can second question - I get my account now? It seems that if there has been a breach of security, spammers have done a better job than me to break the security of Apple! Help, please...

    Yes, the fake pop ups are possible in Safari, but it is unlikely for this message. There is no advantage to any con man, unless he directed you to a Web site or dial a phone number.

    You should directly contact the apple Support, starting with the link contact Apple at the bottom of this page.

  • Questions Apple ID security waiting period

    so after 4 hours of research I have come out empty-handed... what I want to know is how long the lockout is to answer your questions in case settings of your apple ID account after you entered incorrectly too many times. Yes, there is a button that says it will send an email to your recovery email address, but after clicking on it probably more than 250 times in 4 different browsers and several log-out/ins it absolutely seems to do nothing... All I want to do is to change the e-mail address of recovery to something else so that I can change the apple for what is my current recovery... email address which I can not ID while its currently my recovery... e-mail address and I am sure I don't know why he wasn't my answers to security questions... but now all I manage to do unless I want to call Apple Support * UGH * is to wait for the lockout period and to allow it to display again security issues...

    TLDR: Cannot change email recovery address because answered security questions wrong too many times... Need to know is how long waiting period before I can try again.

    The screen tell you how you have locked yourself for? People have posted about getting messages to the topic being locked for 8 hours.

    Contact technical support in the country where you are (and therefore the country on your account) to get the reset questions: Contact Apple for the Apple ID account security support

  • How I replace perfectly my record excel sheet with ability of database? + General questions about computing distributed with LabVIEW

    Surprisingly, I'm almost finished with a full blown control-simulation application, that I've been working on for more than a year now, thanks in no small part of this community. The final step is to run on the simulations of k ~ 8 and be able to meet a simulation and overall statistics on performance. Each simulation is taking about 6 minutes of real time to run (~ 2 seconds of real time per hour of simulation time, valid for 7 days of simulation), as we seek to about 800 hours of your time to simulate. I have 5 computers available and a raspberry 2 Pi these simulations on, I'm looking to set up a kind of compute cluster at the end in about 2 weeks.

    The ability of current logging is sketchy; I got about 40 columns of data, and they are written in a spreadsheet with a .xls format tabs-delimited. This works very well for individual simulations, but it would be quite heavy to deal with if I had more than 20,000 of them. I think this must be done with a relational database sort, but my experience with databases is very limited, especially then, when it comes to LabVIEW. Here are my questions:

    -Can I create a kind of master-slave configuration where a computer (and probably the Pi) keeps track of the simulations are complete, which are running, and who have never run? Computers slaves ask for simulation settings, and IP would give them to him.

    -How should I take care of the database? Each simulation is about 500 k in .xls format, it's about 5 GB of data in all. Computers slaves synchronization from time to time to take care of the redundancy?

    -How can I refine my memory + General fresh disk I/O? How can I know which items from my point of view most of them?

    -Do you have suggestions for the implementation of clusters of databases relational/computer with LabVIEW?

    I have attached a picture of my configuration of logging + the overall structure of the application. It is a state machine with a structure of the event for the interruptions.


Maybe you are looking for