Generate a rule to show several instances of entity attributes

Hey!

Phil (the still waiting for beginner training here). I have a little trouble getting the aliasing to work when I want to perform a check on the same entity non-singleton.

I have a scenario set up when an entity of non-singleton attribute 5 (let's call it 'the child') will generate a maximum of 10 times (source of data-> muiltiple Oracle dbs).

I need to generate a rule (or rules) to report a failure when the no. recovered children is > 10 AND to display each attribute of the up of 10 entities "the child."

so far I have generated the following:



the BusRule (limiting the number of children) works correctly if
the number of X_children < 11

the number of X_children = InstanceCount (text value of relationship "the child")



SO at this point I have a check for the number of instances of 'the child' entity and one indicator if there is > 10 entity instances (so I'm halfway there!)
I played with the following to try to display each of the attributes of each of the children (up to 10) that are returned (below is the first example, I tried with the child.firstname attribute)


Display of up to 10 X_children attributes works if
ForAllScope (text value for the "child" link, children)
and
first name of the MCH is known * the number of X_children


HOWEVER - I get the HTTP 500 error (stack trace indicates the modules failed to load cos ' Subpremise to quantify local must be Boolean "). I kindof get the bulk of the error response, but do not understand why he thinks that it is Boolean.

All I need essentially to know is 1. How to view each of the attributes for each instance of the entity and 2. What I'm doing wrong.

As in my previous post, I feel that I should apologize because I'm not sure if I provide enough information or even good info for anyone to understand what I'm talking about because I have yet to attend training (I only used the tool for the last 2 days) and so I'm limited to trawl through the help files , so I appreciate any help/advice anyone can provide!

NB: I'm using OPM v10.1

See you soon,.

Phil

I have not read all the details here, but for purposes of validation, error or warning events are another option to consider.

ForAll requires you to put your condition in the same line (the condition is generally defined as a rule by the way).

ForAllScope allows you to continue your rule to put conditions on the following (indented) lines of the rules. If you want to disambiguate on a reference to the same entity in the bottom of your rule conditions, ForAllScope allows you also to alias of this entity in the lower part of the rules to another name. For example, this allows you to talk about "brothers and sisters" as part of one of the kids 'parents.

Davin.

Tags: Oracle Applications

Similar Questions

  • My computer shows several instances of xpsp2res.dll module in System 32.

    My computer shows several instances of xpsp2res.dll module in System 32.  I found them using Norton Systemworks process Viewer.  They look identical.  Is it a kind of duplication should I eliminate?

    I think that the Microsoft Support Engineer gives you just a bunch of things to try that neither explain the 'problem' or won't help you at all.

    Depending on your installation, you can have several copies of xpsp2res.dll on your system and you should have one in your system32 folder, in the dllcache folder and perhaps many others (I'm 27) in the folder system32 on various issues under the MUI folder and different down there.  You can't have two files with the same name in the system32 folder.

    The MUI folder means "MUI" and the file contains messages XP and icons and files contain specific language XP messages.

    If you use the built in Windows search, you'll probably find a lot.  Each of them a click right, choose Properties and look at the Version and then the language.  If you are configured for English, the one in system32 should say English and others in the various MUI files will show another language in the properties/language (German, Russian, etc.).

    You will also find that you can have dozens of file xpsp1res.dll (for Service Pack 1) and dozens of files for the Service Pack 3 xpsp3res.dll, you can even have a xpsp4res.dll file in your system32 folder (even if there is no SP4 yet).

    Depends on your installation, which we know nothing since MS Answers is no problem for any information system when a new question is asked.

    I really don't see how Microsoft Support engineer 'tips' to run Disk Cleanup or the Microsoft Safety Scanner will help you at all.  It isn't even a good guess, but it has links to the KB articles.

    If you think that your system may be compromised by malicious software, I could do this:

    Download, install, update and do a full scan with these free malware detection programs:
    Malwarebytes (MMFA): http://malwarebytes.org/
    SUPERAntiSpyware: (SAS): http://www.superantispyware.com/
    They can be uninstalled later if you wish.
  • The Windows Task Manager shows two instances of HpqPhUnl.exe running under XP

    My windows Task Manager shows two instances of HpqPhUnl.exe Runnung.

    * original title - why do I have two HpqPhUnl.exe race? *

    Are you using the quick change of user with more than one user connected and are both instances of HpqPhUnl.exe running under different user names?

    Although it is always possible for malware to masquerade as a legitimate file, HpqPhUnl.exe is related to the HP Photosmart Essential software provided with printers HP all-in-one.

    It seems there were several problems with Photosmart Essential and HP has replaced with HP Photo Creations.  HP claims, however, that he "supports" always Photosmart Essential.  See http://h10025.www1.hp.com/ewfrf/wc/document?docname=c02475046&lc=en&dlc=en&cc=us&product=3857372

    If you have any problems and you're just curious, I suggest you leave the pretty well after scanning with the following just in case two free tools:

    MalwareBytes Anti-Malware
    SUPERAntiSpyware

    If you experience problems with your HP software - and the scans do not present any malware - I suggest to ask in the forums HP (there are 3: consumer, Business and IT resources.)

  • Vista showing several networks with my SSID

    I've just set up my WRTU54G-TM for wireless access. By linksys recommendations, I've changed the SSID, disabled the SSID broadcast and enabled MAC filtering. I joined the MAC address of my lapop Vista Home Premium. I am able to connect very well, but there seems to be several instances of my network. First of all there is "unnamed network", which I assume is mine I put not broadcasting my SSID. However, when I connect to my network "no name" 3 other networks appear showing my SSID ex. Bob Bob, Bob 2, 2 3. Is this normal? Are all of the different networks protected by the same?

    Thanks for any info you can provide.

    Do not turn off the broadcast of the SSID that you have enabled filtering MAC, no wireless computer couldn't connect unless you enter the MAC address of the computer on MAC filtering wireless... I guess that you won't get many instances of your SSID after you enable the SSID broadcast... Also, I would recommnd allows you to change the SSID... Check if it works for you...

  • Several Instances ID using unique configuration files?

    I'm working on a project that has two instances of IDS that will essentially exactly the same thing, just triggered in different ways. Given that the two instances of IDS will do exactly the same thing, we thought to use a single file fsiuser/fsisys for both instances. For now, we have set them up separately, but the files are almost identical. My question is, is it a good idea to always have a link to 1:1 to an instance ID to a set of files in the MRL fsiuser/fsisys or is - it normal to have several instances of IDS point to one set of fsiuser/fsisys if the objective of the fsiuser/fsisys is the same thing?

    So, you have on server 1, ID - A, ID - B and ID - C. For clarity, we'll call these facilities. In the terminology of the IDS, an instance is a scalable subprocesses of the IDS. You can configure an installation of start ID IDS multiple instances, which all share the same configuration.

    It sounds like you're just make change transaction ID - B WIP and ID - C, and you mentioned that TEC was in a DB, so I guess that's a real database. If these assumptions are true, then you should be fine to share configurations... but I feel like ID - B and ID - C should be merged in one installation that generates multiple instances to handle the load of transactions. Is there a particular reason that it has been implemented in this way?

    -A

  • Application of the rules to Instances of entity in a sequence (multiple calls necessary?)

    Hello

    In my OPA team, we have a situation in which it would be useful to be able to run a series of calculations on a set of instances sequentially. We wonder if there is an acceptable method for this in a single call to a modules, because the OPA does not allow a loop or a sequential processing of data in a way that seems obvious.

    Context:
    Consider a situation involving a computation that can be performed on a single Bill, but we have a series of bills to deal with. For example, let's say that there are a certain amount of a deduction or "co-payments" that must be subtracted from the large bills, but is deducted in greater quantity of invoices received earlier (rather than be distributed also among them) and then will deplete fairly once was subtracted in all. In this case, it is not sufficient to use a statement of the type «for each of the Bills...» "because the conditions for the calculation have to change with each invoice. This seems to require the ability to browse an ordered list, but we do not know if something like this is possible (without violating an axiom or advised).

    Ideas:
    The best idea we could come to would be to use a time stamp to identify the Bill earlier as a starting point and then use the function of 'unknown' to force the rules to calculate the deduction for 'other' more former Bill in sequence. The current solution will be to call several times modules by an external script that loops through the Bills.

    To sum up, we wonder whether there is an acceptable approach to apply a set of rules to an entity instance before to apply the same rules to others, without requiring multiple calls for modules.

    Thank you!
    -Patrick

    Published by: Patrick guess on July 6, 2011 19:11

    You started down the right path. To quickly answer questions, there is no need for multiple calls to the basis of rules, no for ranking explicit rules or data.

    The challenge when using unordered rules / systems of determinations is out procedural thinking (that loops or sequencing data explicit is required). The solution is by expressing the declarative logic equivalent (which requires no sequence with the right answer). In this case, consider the calculation from the perspective of one invoice at a time and write the rules that express properly how much to pay, what is the quota, etc. For the batch processing where running tallies are needed, there is something practical for use in the rule based systems - conclude the subtotal per each item being counted (for example, remaining annual quota through each invoice). This approach allows the declarative rules which "defined" the method calculate the score by a Bill, so that the following invoices can use the score of previous bills. Unfortunately, the description abstract approach always sounds more confused, so here is an example of rule of pseudocode that can communicate the key elements of the approach...

    Assume:
    Bills have numbers (or dates/hours) which can be used to conclude an absolute order for all bills (we will use Bill in ordering them in this example)
    Remaining annual quota of the person is the initial amount of copay remaining before the current batch of invoices is treated
    Each invoice must include a co-payment of $50 (for simplicity, although this could be concluded by rules and vary based on the services provided, etc.)
    Assume all bills are more than the share (again to simplify this example, this could be dealt with in the rules of both conditions)
    The main objectives of the basis of rules are to determine the share of each invoice and the balance sheet of the share of the person (i.e. copay they may still have to pay this year) after treats a batch of invoices.

    Pseudo rules to get the general concept:

    Set the order in which the bills need to be addressed...
    -The Bill (prior Bill) is a member of previous invoices of the invoice if the s prior invoice ID< the="" invoice's="">
    -The Bill (later Bill) is a member of the subsequent invoices of the invoice if the invoice later s ID > ID of the invoice
    -The Bill (Bill immediately preceding) is a member of if immediately before invoice
    the immediately previous invoice is a member, if the prior Bill of Bill AND
    the number of previous invoices of the invoice with ID > ID of the invoice immediately before = 0

    To conclude the first remaining share of each invoice... put them in a table of rules, so they can conclude the same attribute but use different logical formulas
    -Initial remaining Copay of the invoice = remaining share of the person if the number of the invoice is immediately previous bills is 0 (i.e. the first Bill in the batch)
    -Initial remaining Copay of the invoice = share of remaining final invoice of the immediately previous invoice (i.e. each ' initial rest copay "is the same that the invoice immediately before the 'final remaining copay)

    A table is used to define how much share for each invoice - two possible scenarios...
    -Share of the invoice = $50 if the original invoice remaining share > = $50
    -Share of the Bill remaining share = original invoice if the original invoice remaining quota<>

    A rule to determine the final remaining share of each invoice (i.e. after subtracting the share upward through this invoice of the annual overall amount of the person)
    -Copay remaining final invoice = remaining share original of the invoice - share of the Bill

    A rule to determine the person remains final share (i.e. After all invoices in this batch have been processed)
    -remaining share final person = final remaining share of the Bill if later the invoice s County bills = 0 (i.e. the final copay remaining of the 'last' Bill in the batch)

    Note that some attributes and relationships above are not absolutely necessary (i.e., it is not necessary to postpone the two remaining original co-pay and determine a final remaining share by invoice, but it retains the logic of each a little more simple rule).

    Hope that helps...

  • Firefox 4 shows several message boxes with "uninstall all '. '. How can I stop this?

    Firefox 4 shows several message boxes with "uninstall all '. '. They may not be closed and they freeze Firefox. The only way to stop is to END of TASK through the Task Manager.
    OS: Vista) with all the service packs and updates as of April 21, 2011. All other browsers and applications are closed.

    This problem may be caused by an extension that is not working properly.

    Start Firefox in Firefox to solve the issues in Safe Mode to check if one of the extensions of the origin of the problem (switch to the DEFAULT theme: Tools > Modules > appearance/themes).

    In Firefox 4, you can use one of them to start in the questions to troubleshoot Firefox in Safe Mode:

    • Help > restart with disabled modules
    • Hold down the SHIFT key while double-clicking the shortcut from the desktop Firefox (Windows)

    See:

  • Safari address bar showing several addresses at the same time

    Anyone else having problems with the address bar. No work to present frequently visited sites and and after visiting the sites manually or via Favorites addresses are crushed between them (showing several addresses at the same time).

    I have the same problem since this morning, after the EL CAPITAN update

  • Display &gt; show rules only show empty black top and sidebar

    I have an AE CC project with many pre comps and want to use leaders to align layers and dragging the thin guide. However, as soon as I click on display - display rules, it shows a high black void and sidebar rather than units of the rule should have been. When I drag him, nothing happens.

    I have search the forum and the internet, but did not find a similar question. I checked my settings again.

    Any help would be appreciated. It's really frustrating to work without rules.

    Thank you in advance.

    Amanda

    I see. whenever I see this type of Visual anomalies, I suspect a corrupted preferences or GPU Driver file. We will see about that:

    1 reset your preferences: Ctrl / Cmd + Alt + Maj + launch of the app you will be presented with a dialog box to reset your preferences: click OK

    2. update your GPU driver

  • VMFS5 data store shows several errors, which suggests the corruption of the file system?

    VMFS5 data store shows several errors, which suggests corruption of system files.

    the tool allows to check the VMFS file system

    vSphere disk Metadata Analyzer (LOVE)

  • Running several instances of Win7

    Hello, this is my first post in this forum.

    I tried to do some research to make sure that I'm not something that has already been answered, but that have not yet found.

    I would use vSphere Hypervisor (free product) on a single server and run several instances/images of Win7, so that I could use it in the classroom. My hope is that by doing this I need only to maintain an image and keep up-to-date.

    My plan is to create an image, and then allow clients to connect to the server via RDP and start a Win7 desktop computer using this image. I also need to have Office 2010 installed on this desktop is going to be where my teaching is centered.

    My questions are:

    1. This product will make?
    2. How to create the image of Win7?
    3. How licensing issues are handled so that I can legitimately run up to 5 copies of this Win7 desktop computer?
    4. Any other suggestions or thoughts that I have to consider?

    Thanks in advance.

    Russ Kauk

    If you are willing to accept a slight modification, it can do.

    (1) creating an image or

    (2) you create clones of n of this image and start them

    (3) users connect via IP/hostname to each individual workstation.

    If you need to automatically configured virtual machines and management, then you have to accelerate the non-free hypervisor, vCenter and VMware View.

    Regarding the issuance of permits - you will need licenses for Windows "n", likely.

  • Port and several instances of Remoting container numbers

    When dividing the container of remote access in several instances that are running specific services, you are responsible for copy PLM config files in each new location of the folder that contains remoting.  You can then change the configuration file EnvironmentSettings for each to determine which services are running under instances of remote access container by changing the setting isActive to each.

    In doing so, is it necessary to also change the port numbers in each copy of the EnvironmentVariables config file so that they are in conflict with others, even if no service within the container of remoting is running on multiple instances of the container?

    My hypothesis is that if we put a particular service "isActive" false for a given instance of the remoting container, container instance won't lock the port for this service, there is no conflict with the remote instance of the container that is running this service and listening on this port.  This seems to be the case when it is tested, but I heard that you need to change the port numbers for each instance of the container, so a final clarification would be great.

    Thank you!

    Hi Brendon,

    Yes, you are right. If the RemotingContainer service is not running, the port is not used.

  • How to highlight several instance of a word or a sentence in Acrobat XI

    I would like to highlight several instance of a word or a phrase.  I worked with the editors, but I can't find a way to save the changes or change the highlight color using scripts.

    Thank you

    1. open the Document in Acrobat XI

    2. open the 'Comments' on your right.

    3. There are a variety of tools avaialbe to highlight, underline and add text.

  • ImportREDServer.exe runs several Instances

    When I run the CS5 first it starts 8 instances of ImportREDServer.exe (see attached). Is this normal? Also, when I open my project (1200 + R3D clips), it loads a few hundred then hangs (not responding) for 30 to 60 seconds, then charge a few hundred more and so on. I don't know if they are related. However, when I open the version CS4 project in CS4, it loads a lot faster and smoother. Any thoughts?

    Data sheet:

    First 5.0.2

    Windows 7 64 bit

    6 GB OF RAM

    clocked at 1.6 GHz I7

    FireWire 800 6 TB LaCie connected through ExpressCard adapter

    RED Server.JPG

    Yes, it is normal that several instances of ImporterREDServer to start - up to one by heart of processor.

    You have a fairly small amount of RAM for a computer equipped with eight processors. If there are multiple instances of the RED importer running to load hundreds of clips RED, it will take some time, especially if these authorities are fighting for a small amount of RAM. Whenever the software fight more RAM, you experience delays, especially if the contents of the RAM, eventually exchanging hard disk.

    I have 24GO of RAM in my computer at home with the same number of processor cores you have. It's a big positive difference.

  • Lines show several times on State invoice

    Hello
    If terms of payment are payments then lines show several times on the invoice report.

    Assume that the payment terms are 10 installments (price point, Description, quantity, price per unit and Extended) lines appear 10 times. But I need display time line data only (article, Description, quantity, unit price and extended).

    Please help me to achieve this goal.

    Thank you
    Subbarao.

    have you tried to check the number of payment to one?

    Display lines only if the slice number is 1.

    print

    --
    Pradeep

Maybe you are looking for