generation of sinusoidal wave with smu
Is it possible to generate, for example, one 3 a 50 Hz sine wave with SMU 4138 or 4139?
THX
The DCPower API provides no screws to use blocks of power or SME like FGENs. However, it is possible to program the jury at the exit of the standard functions by translating the desired frequency and amplitude to a sequence of continuous output with delays of source is defined so that the output function the user selects is output on the terminals of the device.
The attached program allows you to use a NI 414 x, NI 4135/4136/4137/4138/4139 as a FGEN. As it is, the program is limited to a maximum output frequency of 5 kHz.
I have attached a version of the code for the current output and a version for output voltage waveforms.
Tags: NI Products
Similar Questions
-
3rd generation Intel® Core™ processors with Intel® HD Graphics 4000 questions
Dear HP sorry for my bad English, I have a problem on my laptop
When I played or open some game or apps there make my always 100% CPU usage, which is happen, maybe because I do not want to install the latest (3rd Generation processors Intel® Core™ with Intel® HD Graphics 4000). I get a lot of lag when played a game... but my friend with the same machine than ever
I am looking for my problem on google, but the result is emptyMy problem:
-CPU usage * always 100% when I opened a few apps or game
-J' do need a link to download the latest 3rd generation processors Intel Core™ with Intel® HD Graphics 4000 *.
-If the HP have software (support for customers) like sony (vaio care). *
I thank you very much for the reply and sorry for the bad fate
Hi DAli99GRT,
Thank you for your request, I will do my best to help you!
I understand that you have a problem with the performance of your laptop. When you play certain games the CPU usage is 100%. Looking for updates to your system.
You can run The HP Support Assistant to help with HP updates for your laptop.
You can also manually check from the HP drivers & downloads and captures your exact model by following the instructions.
How can I find my model number or product number?
Here are the documents that may be helpful. I do not know what operating system you're running, while I have provided two.
Improving the performance of the system without adding memory (Windows 8)
Improving the performance of the system without adding memory (Windows 7)
If you need more assistance, can you give us your exact model and the operating system you are using.
Results or clarification would be useful.
-
How to make a sine wave with a series of spherical objects (symbols of Yin/Yang)?
Do the yin/yang. Shift drag a copy some distance away. Create a blend between the two stages specified. Draw another line. Use the effect > transform > Zig - Zag with enough height and number of steps and smooth anchors. Expand the appearance of the effect. Select the mix and the wide range and the object > blend > replace Spline.
-
I'm at the stage of planning for a system using cards SMU-6544. I have not yet material. I want to constantly stream my generation and acquisition and compare real-time software. I want to be able to run the minutes, hours, or days, and be able to count it fails and the failure rate. I'm looking example "Acquisition continues - memory stream". In this example, the SamplesPerRecordIsFinite property is set to FALSE, SetRelativeTo is set to "current position". In a loop, "FetchBacklog" property is queried until there is enough data and a waveform drillthrough action is performed. My questions are: can I run this streaming acquisition forever, or it stops when the memory card is full? I suspect he can go forever since most logic analyzers have 'circular memory', but I don't want to assume. Also, I will acquire data to clock frequency of 20 MHz, 16-bit, both on the data rate of 40 MB/s. I guess that this approach will work at this data rate because it is much slower than the ability to stream the 6544. It will be a problem?
Hello
The pointer memory will roll once it reaches the end of the memory. Once the FetchBackLog hits a specified value, it must pass all the values out of the room and move the pointer to the "oldest" sample and refresh with new information in the order book. This will allow your feed to continue indefinitely. The memory embedded amount will determine the maximum size of the buffer, you can get.
At the pace you want to run and the channels, that won't be a problem either. Background basket SMU communication will allow the Commission to reach the rate of acquisition of 660 MB/s and 400 MB/s for this Council HSDIO generation. Even with PXI (theoretical flow 130MO/s) you would have no problems with the 40 MB/s out of the tray.
-
Generation of sinusoid frequency accurate FPGA
Hello everyone,
I have a myRIO and I want to build a lock in the amplifier. To this effect, I need excite (in fact the driver laser) laser with a certain frequency, in a case 32754 + to 1 Hz. This signal must be a square wave. I need a sine and a cosine with the excact same frequency that I use to turn on the laser. But the sine and cosine do not have to be sent outside the FPGA through a port analog or digital.
To summarize, I have need of a square wave, sine and cosine with excactly the same frequency. Only the square wave is sent through an analog port. (I use the "square wave generation.vi")
This works very well for example 4212 Hz. But 32754Hz can't be represented pretty good by a 40 MHz clock (a lot of jitter). To this effect, I thought to use a Schmitt Trigger.
Finally I come to the point! I use the "generator.vi of sine wave' on the FPGA.
Can I output a sine wave signal with any frequency I want to use this VI, if right of Nyquist is hurt? As this VI uses DDS I think that Yes, can anyone confirm this?
I only ask, because the sine wave will be converted into a square by the schmitt trigger signal and should always have the same frequency that it represents in the FPGA.
Kind regards
Slev1n
Slev1n wrote:
Hey, JLewis,.
1, how can I calculate/derive the resolution?
2, the size of the LUT or also the resolution of the amplitude of the a influence on the resolution of frequency?
1. the resolution only depends on the accumulator and clock rate, e.g. 40 MHz / 2 ^ 32. The rate of the clock increases the resolution of the average frequency of DDS, but will negatively affect the jitter due to the clock period. In your case, it seems that you are more interested in the resolution of frequencies without jitter, which are those for which the clock frequency is an integer multiple of the frequency, for example freq * k = 40 MHz. You can play games with clocks derived from hitting a specific frequency, but in general most of the frequencies will be free of jitter.
2. the other settings do not affect the resolution, but affect the phase noise and/or quantification. For your application, I expect that phase noise is the biggest problem and is affected by the LUT, the interpolation option size and samples/cycle (IE, the rate of the loop). Quantization noise is affected by the output data type and amplitude (otherwise the range). You will get a filtering via the D/A conversion and the Schmitt trigger, so it is difficult to predict how much of a concern these parameters will be for you.
You can see the Xilinx DDS generator (on the pallets of Xilinx IP integration). He has a few more options as the dithering phase and a 48-bit accumulator. On the theory and the effects of various parameters of their documentation is excellent: http://www.xilinx.com/support/documentation/ip_documentation/dds_compiler/v6_0/pg141-dds-compiler.pd...
I hope this helps!
-
iPod classic (7th generation), do not sync with iTunes on Windows 10
Salvation;
My iPod classic (7th generation, 160 GB) is not synchronized with iTunes 12.3.2.35 (latest version) on Windows-10. It is synchronized before, but it suddenly stopped synchronization. The iTunes is to identify the iPod, but it is not sync. Also, all my other iPods (nano and classic) also show the same behavior. Help nicely, as it made all my outdated iPod. Thank you!
If the iPod appears in iTunes, select it (click on its button on the device on the horizontal bar) to show its settings screen in the iTunes window. The side left (in the sidebar), under settings, click music. Right, parameters of music on the iPod screen.
NOTE: All iPod songs that are not in your iTunes library (on the computer) will be lost.
If the box Sync music is not checked, check it. This enables automatic synchronization. If your library complete iTunes music can fit on the iPod, you can choose the option synchronize entire music library. Then click apply.
If your library complete iTunes music does not fit on the iPod (or if you do not want to synchronize 'everything'), you can choose the option synchronize select playlists, artists, albums and genres. Make your choice from the lists below. For example, you can keep one or more playlists in your iTunes library, with songs that you want on the iPod. Back on the settings screen of music from iPod, under playlists, search for and select (checkmark) these playlists. After making your selections, click apply.
Further, iTunes syncs iPod "" with your library iTunes music (or the selected part) when you connect the iPod (or click sync , if already connected).
-
iPod touch 4th generation does not not with xcarlink
Can anyone help. I have recently purchased an iPod touch 4th generation for use with the xcarlink iPod interface. I can't seem to make it work either comes up with is not compatible for loading! Can I get nt music broadcast through your car stereo speakers, but an older iPod worked fine and my iPod 2. Y at - it something I am doing wrong? Y at - it connectors adapter that I can buy to fix this very annoying? Can anyone help?
Sometimes it works:
-Reset the device iOS. Nothing will be lost
Device iOS Reset: Hold down the On / Off button and the Home button at the same time for to
less than ten seconds, until the Apple logo appears
-Reset all settings
Go to settings > general > Reset and tap reset all settings.
All your preferences and settings are reset. Information (such as your contacts and calendars) and media (such as songs and videos) are not affected.
-Restore from backup. See:
Restore your device from an iCloud or iTunes backup - Apple Support
-Restore factory settings/new iOS device.
However, xcarlink is old and not infrequently an iOS update/new model iPod case compatibility. All I can find on the site of xcarlink is:
(6) support iPod 3, iPod 4, Nano, Nano 3, video, Mini, Classic, Touch, iPhone
-
Best way to generate signals of activation (square wave) with my 9401 on my 9022?
Hi, I tried seriously over the past two days to find the best way to do it. I am trying to generate a very precise square wave, controlling the duty cycle and frequency, with the OID on the 9401 in testbed cRIO 9022.
I have a VI that is theoretically able to do this, but whenever I try to go above 5 Hz or more, duty cycle and frequency becomes inaccurate (I have watch on an oscilloscope), various a lot too for my needs. I have a feeling that this is caused by my addiction on the calendar software controlled, with errors at the time (of the ms order) accumulate as they get processed and the signal is sent. I have attached a piece of code that illustrates the basic idea of what my VI have in them.
I have avoided the square wave generators integrated because I could never work to satisfaction, but I can work with them so that will solve my problems. Selection structures and cases prevent the user to exaggerate their inputs. Unwaited so the loop was just to test.
I'm running the 9022 as target in real time, but also tried to run in the FPGA and I was able to produce much more accurate signals using FPGA VI square wave, displaying a Boolean variable, but I couldn't see the best way to get double precision variables to work with everything (and I want more precision than variables FXP enabled clock 40 MHz).
I feel there is just a mistake in my approach here. I've seen other discussions where people throw around using meters to edge of the test bench to produce a square wave, and I see the example screws as Gen dig pulse - continuous Train, I'm not sure if initially these screws DAQmx for my situation (eg. How to identify my counters, because they are clearly not Dev1/ctr0 by default in these examples)
Thank you
Dealing with the representation of Point fixed and all is a reality for LabVIEW FPGA<= 2011="" programmers.="" you="" might="" build="" a="" small="" sub="" vi,="" such="" as="" the="" one="" attached,="" to="" encapsulate="" the="" frequency="" calculation,="" thereby="" abstracting="" the="" conversion="" formula="" and="" fixed="" point="" data="" type.="" you="" can="" adjust="" the="" properties="" of="" the="" floating="" point="" input="" control="" to="" accept="" only="" valid="">=>
This implies the series VI void on the host of the RT, and not on the FPGA target. So, you also need nodes in the Palette of the FPGA Interface to send PWM fixed Point RT frequency to the FPGA. The complete solution of frequency may resemble the following. It is common for FPGA programmers to build a collection of thesesub screw, that make up the API for hardware.
Note that 40 MHz is hard-coded. For increased flexibility, consider making the FPGA clock rate an entry to the Subvi with a default value of 40 MHz.
-Steve
-
APS Shaker and amplifier work with SMU-1071
Recently, we bought a shaker APS 113 and 125 APS amplifier for our new research project. We want to use NI-SMU-1071 controller system to control the shaker via amplifier.
NEITHER SMU-1071 > APS-125 amplifier > APS 113 Shaker
APS asked us to use Spektra VCS 403 (Vibration Control System) for this case. When we tried to use this software, there is an error in "open loop". But all things related very well. Amplifier and shaker do not work.
The seller company has no effective technical information. Please let me know your solutions, thank you.
Again, the 1071 is just a chassis. There must be some specific cards in it and you have not yet identified these cards.
In all cases, you will need to obtain assistance from the supplier of the custom software unless you intend to write about something else and need some help with that.
-
Generate a continuous output of square wave with E Series DAQ cards
Hello
I use a card DAQ-AT-MIO-16XE-50 and labview 6.1 to generate the frequency divider. The first thing I want to do is to enter a continuous digital signal into the program so I can divide it. The attachment is the program I use. It's pretty simple, just read the output signal and put them all in a while loop to get a continuous pulse. But when I want to observe the waveform on the oscilloscope, I got some square waves unregular.
I'm a freshmen in labview. It will be appreciated for all her help!
Hello
If you are just getting started with digital i/o with traditional DAQ, I'd take a peek at some examples to see how to structure your code for both input and output. There is one here (http://zone.ni.com/devzone/cda/epd/p/id/1113) which should give some features similar to what you are looking for, but if you want more examples, you can navigate to the examples as a result of the article here (http://digital.ni.com/public.nsf/allkb/46D0C7360A10D25F862571B5007B4411), as long as you have installed them with traditional DAQ.
-
write the file wav with power button
Hi all
I am trying to record a wav file at a push of a button with Auto name files.
The idea is the VI is running, display data when recording key data are saved as wav up to what the key once again. The file name is generated with the date and time automatically. The user can create as many record as he or she wants without stop the VI.
As you can guess, I'm not a good labview programmer and I have a problem because my VI does not work properly. The return registered wav file are huge they seem to hold too much data essentially. When I play it back it sounds loop. I understand that the problem is with my VI. Believe me, I've been trying and trying without success. Could someone have a look please and let me know what the problem. I do not understand how to operate the part save my VI.
Please find attached my VI.
Thanks in advance for your help.
Frédéric.
Yes, our solutions are remarkably similar.
Be careful to close files when you have finished writing for them - I'm not sure that you have done this. You placed a fence outside the loop that will only close the most recently created file.
Kind regards
-
Order of generation of the signal with the command START/STOP (State Machine approach)
Hello
I met the problem with the realization of control (START/STOP) signal generation using state machine.
There are 4 States in the computer status (see 4 screenshots below).
The problem is when I click the button START, only a short series of generated pulses.
What is the staff of task_in/task_out issue, which is not properly managed?
Thanks in advance
Pavel.
Oh... you have defined with the mechanical switch action up to published... Right click and go to mechanical Action > latch when released. Do the same for your Start button.
You took a second to read down hold value, because your writing acquisition takes on this subject for a long time, apparently.
The stop button the Application, I did switch when set to released. It is set to the switch so that it can be used as a local variable in the Acquisition State stop as Idle.
-
Generation of impulses associated with Motion Control
Hello
I'm currently controlling a stage prerequisite microscope with Labview, through a serial port. LabVIEW communicates via the active X functionality to the control of the stage box.
I would like to be able to integrate a feature of external impulse generation in the system. So, I wonder what kind of material, I will need to do this? The pulse should be about 5 V in amplitude and in the range 1-20 Hz.
Finally, I wish to cordinate movement of my turntable of the microscope with the external pulse generation. Have some sort of feedback would be important as well.
Thank you for your help.
Mike
Thanks Dan. I appreciate your advice. I have also received feedback from my local field engineer and identified which device will work best for my needs.
-
E/s instrument with SMU-1062 q Assistant
Hello
I use a SMU-1062 q with LabVIEW 2009 installed on it. In Measurement & Automation Explorer, the frame is visible, as well as two cards SMU-6363, I built in. E even works without all the failures 6363 self-test.
My problem is, that after if I insert an Instrument of e/s Assistant in LabVIEW 1.01, then click on choose an instrument, the SMU - two 6363 do not appear in the list. Only Com1 and LTP1 is listed.
What should I do? Thank you very much for your support!
Best regards, Michael
The 6363 is programmed with DAQmx functions. You will use the DAQ Assistant.
-
ripple noise / and defective corrections acquires with SMU-4496 hammer
Hello
Read a hammer with our SMU-4496 in 1073 chassis and LabView, I get things like these (which is obviously wrong). I enclose a simple project file. I know that this card can not read CD, but I think he should be able to read correctly this impact. Shouldn't it? No idea who might be the problem.
Thank you in advance and good year!
Maybe you are looking for
-
Windows 7 Pro 64 disabled after the system crash
Hello. My active 64-bit Windows 7 system crashed this morning with the Blue Screen of Death. Restart is not possible - message "Bootmgr is missing" came. I used the repair disk, I did when I got to the computer to fix the boot sector and was able to
-
Since some days startet mein browser Chrome nicht mehr.
ICH habe IHN schon deinstalliert und neu installed. Ohne Erfolg.Habe vor dem Installieren Antivirus ausgeschalten.All other Internetverbindungen function.
-
I want to just use it for a short circuit which will be completed during the month, if I buy the annual plan does mean I have to pay for the year? or I can simply cancel the plan after a month and AE will be automatically disabled? I really need a mo
-
Is there a parameter of the snap distance setting?
The tolerance for the hanging/anchor system is simply too high. Can I reduce the amount of pixel distance that the cursor must be an anchor point before the snap is used? I wear the "s"key on my keyboard. " Thank you.
-
LR and PS user in English only. How can I upgrade in English in France?
HelloProblem using automatic upgrade of the CC LR and PS in France, but keeping the version English this software.Portable French whenever my CC automatic updates on my W7 laptop Toshiba (sold to me in France and I bought in France), CC my updates al