generic error of labview 2011

Similar Questions

• Labview 2011 project with sbRIO cannot build app with Lv 2014 RT: error 1003

  Hello

  I have a project developed with labview 2011. It contains a PC application and a SbRIO-RT-FPGA app.

  I made a simple change in a RT VI. then I tryied to build the new application for my SbRIO.

  the problem is when I click on 'Build', an error dialog box appears saying that there is a VI with broken arrow. but my VI are OK.

  Can you help me please!

  Best regards

  

  
  

• generic error, error code Labview support 3: could not load front panel

  I worked on several vi. Once I had to reboot the system and then only the screw does not work.

  I searched through discussion forums, but I'm not able to do anything.

  I here enclose the VI that displays an error like

  Generic error.

  LabVIEW support 3 error code: could not load façade.

  I am now using Labview 2009, 32-bit.

  I have attached the error dialog and also the program.

  I'd be happy if someone could help me with that.

  I installed f3 patch and the problem is solved.

  Thank you for the help so far

• Report Generation Toolkit compatibility with Microsoft Office 2013 and LabVIEW 2011

  Hello

  I design the 2011 Version of LabView to test solid state device and need to create test data after this unit tested.

  When I save the test data in the configuration of Excel after you run the Laview program, it created an error like "error - 41007 is is produced in NI_report.lvclass:New Report.v->... OR reports; Musr you have the LabVIEW Report Generation Toolkit for Microsoft Office installed to create this type of report. The musr toolkit also have an activated license or be in trial mode. »

  Questions: Do I need to install LabView Report Generation Toolkit for Microsoft Office on my computer? If Yes, what is the LabView Report Generation Toolkit for Microsoft Office Version. Where can I find this software?. I use Labview 2011, Windows 7, MS 2013 in the computer.

  Thank you

  Jonathan Tran

  You can try this: http://download.ni.com/evaluation/labview/ekit/other/downloader/2011RGT.exe

  From this link: http://download.ni.com/evaluation/labview/ekit/other/downloader/

• FieldPoint for Labview 2011 W7 - 64 bit

  Hello

  I'm currently having problems running FieldPoint Labview 2011 on running on Windows 7 64 bit system. I installed the latest (6.0.9) FieldPoint driver which is compatible with 64-bit systems. However, when I try to make a simple program (see photo A). I met two main problems.

  (1) I'm not allowed to add a control, or a constant to the FieldPoint i/o Point in terminal (see illustration B). The option is grayed out.

  2) there is an error with the FPLVMgr.dll file that is used by virtually every necessary .vi for FieldPoint (see picture C)

  I'd appreciate any help. If you need to know the application, I have a Thermocouple cFP-RTD-122. I'm trying to implement a simple program to read out temperature (see picture D). E PIC shows my MAX.

  Thank you!

  Juan

  Hey Juan,.

  I see you are using 64-bit Windows, but you use a LabVIEW 2011 64 bit as well?  FieldPoint runs on a 64 bit OS, but does not work in the 64-bit LabVIEW environment.  I would recommend installation of environment 32-bit LabVIEW and go from there.

• Executable VI with Labview 2011

  Hello everyone, I'm doing an executable on LabVIEW 2011 SP1. I've never done before, but in my project, I go to tools-> Build Application (EXE) from VI... I check to make sure that all the Sub VI are in the Dependencies tab and I put the way I want the EXE to go, then I build it. Building compiles and I have good Run-Time Engine installed, but when I go to open the EXE file, I get a lot of mistakes because void VI could not be loaded. I checked these Sub VI that were not loaded and they are locked and password protected. Probably comes with LabVIEW, so they don't want to play us with anything. How can I get these included in the EXE and not return an error?

  Thank you.

  I deleted the Run-Time Engine and downloaded again, and I think it worked. Strange, but I accept it

• Ask for a link for Labview 2011 SP1

  I ask for the link to download the Labview 2011 SP1.

  I have a bug that corrects SP1 (damaged Panel before, cannot open vi, see the discussion http://forums.ni.com/t5/LabVIEW/LabVIEW-load-error-code-3-Could-not-load-front-panel/td-p/1895379/pa...), but the download link disappeared.

  Please, if anyone knows tell me the link to download (32 bit).

  I found it here

  http://download.NI.com/support/softlib/LabVIEW/labview_development_system/2011%20SP1/

  Anyway, there are a few problems with the link that you gave to me. I thank you all the same because what is happening is somethink wronk with national instruments site, which is not the same for all countries (web designers should check and fix the bug).

• LabVIEW labview 2011 2003

  I am completely new to labview and I want to do a compression test with frame of MTS

  I got a code that is written in labview 3 but it does not work (I think it's a problem compabality) in labview 2011 (the version I have access too and my acquisition of data works with)

  I have to fix as soon as possible because I do my research and I did not have enough time to understand the code. I use PCI-MIO-16-4 and I need to 3 channels for moving loadcell, extensometer and Phillips.

  I appreciated if anyone can give me a direction for this

  Thank you

  Roozi

  Your topic says 2003 but your message says version 3 - a huge difference. If you are able to load, it is not the version 3. See if you get an error message that the code is old to convert, then post to Conversion of Version map you linked to at the top of the page.

• Control CMD (command line interface) using Labview 2011.

  Hello

  I'm trying to control software that has an interface to command line using LabView 2011 but I have problems when reading the information.

  Is attached the VI I created so far, but it is not working properly.

  Problems so far:

  1 - if I use ReadLine(), it blocks showing no error and nothing else.

  2 - ReadToEnd () same problem as the previous line, the software hangs just at this stage.

  3 - if I compare the response of the "peek" in waiting for the - 1 indicating there is not more character, the hook of software as the previous steps.

  You have some clues as to what might be wrong or another way to 'control' the CMD to send messages, read and send messages, etc...

  Thank you very much for your help.

  I've done it before - I posted about this on the forum here: https://forums.ni.com/t5/LabVIEW/How-to-open-close-and-monitor-a-application-xyz-exe-using/m-p/32511...

  I did also wrap in a library at a given time and post it on the forums, but I couldn't find this particular post.

• Error code LabVIEW-63040 sbRIO 9632

  Hello.

  I am trying to run the VI roaming on my kit NI Robotics Platform 2.0 and it gives me the error-63040 which is a communication error. This is not the first time I try to run homelessness, as I've been able to do it before with success (on another computer), but now it gives me this error. I looked around different ways to solve this problem, verify that it is the IP, making sure that the PC and the robot are on the same network and even formatting sbRIO Council and reinstallling software, but nothing seems to work. I can't find another way online to fix it.

  The code seems to compile right but then the robot does not move. In the picture attached, I have highlighted the process so that you guys can see what I'm talking about.

  Any help on this would be appreciated!

  Hello

  Unfortunately, it is a very generic error which could occur due to several situations. Please check some check resources below:

  RIO drivers compatibility between your HW and your computer:

  http://digital.NI.com/public.nsf/allkb/B77CEB8067558F6F86257203007F1E91

  RIO server does not work:

  http://digital.NI.com/public.nsf/allkb/83DF7B9245541FC8862573A100597696

  Network Configuration changes:

  http://digital.NI.com/public.nsf/allkb/2367ADE10FDD98C4862576EB005C255D

  IP address is not correctly configured in the project:

  http://forums.NI.com/T5/LabVIEW/LabVIEW-error-code-63040/TD-p/1310679

  Kind regards

  AGJ

• LabVIEW 2011 Run time engine installation issue

  I try to install Labview 2011 Run time engine as downloaded here: http://joule.ni.com/nidu/cds/view/p/id/2534/lang/en

  on my laptop Windows 7 Pro. I have the hard drive shared in the C and D drive with plenty of space on each.

  Initially the office IT guy tried to do the installation as an administrator and for some reason any installed at "D:\Program NIUninstaller Instruments\" for some reason any. He went through the installation without error, but after restarting, it seems that some of the components are installed. I never installed anything else OR on this computer, but after installation I see NI License Manager and Datasocket under National Instruments in the start menu. If I re - run the installer it seems to think that everything is installed and there is something to remove, but it is obviously not.

  Subsequently the computer gave me administrative privileges on my account so I have been playing with various combinations of uninstall and reinstall myself but with the same result each time.

  Any ideas would be very appreciated.

  Hi Robert,.

  you have installed the RunTimeEngine.

  What else you expect to see in your Start menu after doing? What's missing?

• NOR-845 x driver Labview 2011 SP1

  Hi all

  I faced problem,

  I have a LabView program that is used to communicate with devices SPI-NOR-8451. Program worked perfectly, on PC with LabView 2010. After that, I moved the program to new PC where f1 LabView 2011 SP1 has been installed. And now, I am not able even open - LabView program stuck on the white block diagram (not responding).

  Program is complex and includes 10 ~ SubVis, which is packaged in the .llb file. I tried different things - to decompress from .llb, or run subVis themselves - for all the subVis, which include a part any communication NOR-8451, I've got stuck LabView. In addition, after the removal of NOR-845 x pilot, I can't ignore everything and load the program successfully, with '? ' instead of screws of NOR-845 x pallete.

  In addition, when I'am tring from white VI and set NEITHER-845 x ref Device link (see attachment for details Link_on_ref_.jpg) on the block diagram, I'm LabView stuck - see the attached Stuck_.jpg.

  I use NEITHER-845 x driver 2.0, I tried to reinstall several times.

  So, it's my suspicious that NEITHER-845 x driver 2.0 does not work for LabView f1 2011 SP1 - is it possible? Or maybe I'm doing something wrong?

  Hi RangerOne,

  Thanks for the trace, as LabVIEW is suspended, it is what I expected but hoped a different error code. If you could go to MAX and reset Configuration data, and then create a MAX Technical report and attach it.

  If you open the test Panel, you run a query, it works or hang? Try to run a trace when you try to query.

  I see the same error with the camera on my machine under interrupt in Pipe status is not abnormal.

  I also noticed that your computer input for findlist, retcount and SrcName parameters have not the & on the non-working paper. I will continue to examine the reason why the & is not there and if it has an effect on the shot.

  DylanC

• LabVIEW 2011 32 bit, fully ER3000, Windows 7 64 bit

  I currently have Labview 2011 32 bit installed on a machine running Windows 7 64 bit.  I am trying to run the screw in the attachment below, but I get the error that the function called in the DLL has failed and that FULLY. DLL may be used.  A reflection as to why this is happening?  I already checked to ensure that the referenced path in function call of the nodes of the screw is correct... any help is appreciated!

  ~ Avi

  
  

• Generic error Datasocket 42 on window minimize

  I use LabVIEW Datasocket connections on LabVIEW 2009 to write to an Kepware OPC server.  I write 64 tags.  It works as expected with local as well as remote OPC server.  The loop that writes each value is able to run and update of values with a wait of 10ms inside the loop.  I have only run problems when I reduce or restore the façade, the block diagram or the window of the probe.  I have 42 error: generic error of Datasocket Open.vi.  This seems unrelated to the DCOM problems that seem to be the cause of this error.  I tried this with local and remote OPC servers, and I got the same result.  Setting loop rates, but 1 second seems too fast it runs without error to launch on minimize.  With 1 second wait, it takes more than a minute to update 64 tags, which is unacceptable for my project.  It is quite easy to simply do not minimize windows while it is running, but that shouldn't be a problem.  I also noticed that several times trying to restore a minimized window, while running the program, I have to click several times on the window in the taskbar before it restores.  I use this on a Dual Core system with 4 GB of RAM 2.8GHz, so the performance of the system should not be a problem.  Ideas or suggestions or additional troubleshooting steps are welcome.  Thank you.

  ejensen wrote:

  Thanks for the suggestions.  I tried setting to basic services, but it did not help.  I also changed the computer for best performance thus minimize and restore are animated is no longer.  I look at CPU and RAM, he doesn't know that it is a question of resources.  After a little more experienced, it seems only to raise errors when I click on the button reduce.  When I right click in the task bar and click on reduce at least, I've never seen the error.  When I click on the button minimize, it happens almost every time.

  Your suggestion to open/close once and write several times sounded good, until I went to implement.  For mutual FUNDS, I have to open a connection to the specific tag I want to write.  There may be a way to open a connection to the server, and then specify the tags, one at a time, but I'm not aware of it.

  My bad!

  I missed the fact that you have a loop in multiples.

  So to change my suggestion too

  Move the open air in a loop For which runs only once and use a tunnel exit on this loop For to create an array of references. A reference for each DS connection. Use this table to the refs of conncetion instead of the table name to control you mainf loop For. Similarly to close.

  Now you'll excuse the following

  A loop to open them all.

  A loop to read.

  A loop to close between them,

  Data taken unite us.

  Welcome to moans.

  Ben

• Install the engine 6.1 enforcement (or compatible) labview with the labview 2011

  I installed a Labveiw 2011 trial version in order to check for potential problems to upgrade, I get if I decide to spend labveiw 6.1. Well, needless to say, there has been a lot. This is as expected because I have not updated labview for many years. I'm still not under any pressure to update; However, I want to in order to get help and make sure that I have no problem of compatibility with new equipment purchases. I was able to solve most of my problems of compatibility with code simple and other corrections. However, twice now I ran into an error at the launch of labview executeables compiled by two different manufacturers. The equipment I use is not yet old... maybe a year or two. When I run labview executables for the device on a PC that has the trial period 2011 installed labview under control, I get an error message saying something like "this requires a motor enforcement 6.1 (or compatible) of Labview. I tried to download and install the labivew engine 6.1 but I can't install this engine on a PC that has labview installed 2011. Can someone explain how I run these executables under labview 2011. I can't imagine that these executables were developed using 6.1 as this equipment is not yet a year old now.

  You should be able to have a number any time installed and 2011. I have several versions back to 7.0. I asked what exactly happens when you try to install it.

  Have you tried 2011 withdrawal, execution 6.1 installation and then installation of 2011?