Geographical address on the device voltage map PXI express

Similar Questions

• Is there a way to see the ip address of the devices connected via the airport?

  Hello world

  Is there a way to see the ip addresses of the devices connected via the airport? I can see the name of the devices but not what ip are they?

  Thanks in advance.

  Open AirPort Utility

  Hold down the option on your Mac so you double-click on the image of the AirPort router

  Wireless clients are displayed

  Click on the small arrow next to each wireless client to see details about the device and the connection

• Getting the IP address of the device

  How to get programmatically the IP address of the device?

  -Thank you

  Hello

  You can get it with the QNetworkInterface class.

  Reference is here:

  http://developer.BlackBerry.com/Cascades/reference/qnetworkinterface.html

  see you soon,

  chriske

• How to get more than one address in the same Google Map in Muse?

  Hi, how can you get several addresses in the same Google map in the Muse?

  Make your card with as many points as you want: create and edit your custom - maps Google Maps Help Center

  Save the map and make sure that make you it accessible to the public.

  Then click here to see where you can copy your embed code: embed a map - Google Maps Help Center

  «Now with the copied embed code, you can return to the Muse and look under the menu "objects" where you will find "insert HTML code ' second in the bottom of the menu.» Paste your code embed here and your card should pop right into place.

  See you soon,.

  Craig

• creation of static ip addresses for the devices on befsr41

  How do I create adesess static ip for devices connected to my router.

  You can use any IP address in the range of 192.168.1.2 to 192.168.1.99 and 192.168.1.150 to 192.168.1.254.

• Get the IP addresses of the devices connected to the WiFi network

  Hello guys,.

  I've been looking around and trying to understand this point, but I don't have a solution. The problem is to get the local IP addresses of all devices connected to the WiFi point of access/router connected to my BlackBerry. Similar to the way in J2SE nature you can get the IP using InetAddress.getLocalAddress () and then browse ip addresses and call InetAddress.getByAddress (ip) to check whether the device is accessible. Possible is something similar in BlackBerry or not?

  No, the fault was entirely mine, I misread your message.
  no idea how to do that, there is no access from low level of the network interface and the API is really limited.

• Impact of a change of the IP address of the device vCenter

  We replace our vCenter (Windows Installer) with a new installation of the device of vCenter. For many reasons, we need to keep the same IP address in the former vCenter. I am directed by the unit of vCenter and the failover time I go to 1) re - ip unit to have the old IP vCenter or 2) add a 2nd NETWORK card with the same IP address as the old vCenter

  Are there objections to one of these options? and which option would be best?

  Not to my knowledge. You should be golden.

• You see the IP addresses of the devices listed on the parental control?

  Is - it there anyway I can see the IP addresses of my family security "devices" devices list?

  Previous title - your devices

  Hi Ruben Soltren,.

  Please submit your query. I understand how it was to have this feature in parental control, but currently, we have no option. What we can do is to send this as a feedback through this link so that our product team will be aware of the suggestions of our users of the product.

  If you have other concerns, feel free to post back.

  Kind regards

  Richard

• How to get email addresses in the device?

  Hello

  I want to retrieve the list of email accounts in the unit.

  foreach (const Account &account, m_accountList){
      if (!account.provider().name().toUpper().contains("SMS") && !account.provider().name().toUpper().contains("PIN")) {
  
          const QString name = (account.displayName().isEmpty() ? tr("No Name") : account.displayName()+"|");
  
          Option::Builder option = Option::create().text(tr("%1 (%2)").arg(name, account.provider().name()))
          .value(QVariant::fromValue(account.id()))
          .selected(selected);
  
          selected = false;
  
          dropDown->add(option);
      }
  }However, I don't know how to get the email address. Please help me.
  

  Found the solution here

  https://supportforums.BlackBerry.com/T5/native-development/retrieve-list-of-email-addresses/m-p/2558...

• How can I have a show of name (Harry, phone etc.) device upward in the "devices" section of the Capsule of time instead of the IP address of devices?

  How can I have a show of name (phone Harry, etc.) the device upwards in the section "connected devices" AirPort app for the iPhone and iPad utility?

  Sorry, not the answer you were looking for... but you can not... at least not reliably.

  It's pot luck whether the real device name will be displayed, the IP address assigned to the device will appear. or the MAC address of the device will appear.

  Apple still has not corrected it after many years.

• How to find the MAC address of the mobile device with ADF?

  Hello

  I'm developing a mobile application using ADF Mobile. The application requires the use of the MAC address to continue its development.

  Android SDK provides an easy way to find the MAC address as:

  WifiManager wifiManager = (WifiManager) getSystemService(Context.WIFI_SERVICE);
WifiInfo wInfo = wifiManager.getConnectionInfo();
String macAddress = wInfo.getMacAddress();

  Is there a similar way in ADF mobile to retrieve the MAC address of the device?

  Kind regards

  Joseph

  It can't do.

• How to get the ip address of the data storage device

  Hi all

  I developed a project now and you need to distinguish a virtual machine is saved to the device local ESX or remote network storage device.

  I found the data store object in which the virtual machine resides by vi sdk, but could not find the address of the device that includes this data store.

  How to get the ip address of the coding data storage device, which includes the virtual machine? I need your help.

  Thank you in advance.

  How do you try to make a query. Storage devices provides a logic unit number no, there is no IP address for it.

  You can check the same for the storage on vCenter view

• LaserJet Pro M127fn Installer cannot find the device on the network

  Hello

  I just bought the product, but during the installation - setup is unable to find the device on the network. Device is properly registered to the address 192.168.0.14 (with static IP address), I can see the dashboard configiration at the same address via browser and all works well with the network itself.

  Try to ping the IP - it's ok. Tried to install without active firewall - also fails.

  Double checked the installation process - with automatic search and provide the IP address of the printer - both failed.

  Also, I rebooted the router and the switch and the computer. Is not new. I also tried downloading the last executable configuration on the site - and even once, it fails with 'device not found on the network.

  Then what do I do to fix this?

  Thank you

  Finally found a solution. It is strange as it may seem, but after all, it's a solution.

  -Rinse your DNS and your ARP cache (see the Google if you don't know what that means)

  -Reboot the router (or, where appropriate - switches)

  -Change the IP address of the device on your network. Try with round numbers like (192.168.0.20)

  -Restart your router (and if applicable - switches)

  -Restart your computer (s)

  -Don't run the Setup again and the hoprefully you will have no errors and everything works perfectly for you

  If your problem, similar to mine, persists, repeat the above process again and again... and again...

  Good luck

• Get the device ID in the BpsSubscriptionMessageBuilder.createByteSubscriptionMessage method

  Hi all,

  First of all, sorry if this thread is not appropriate because there is a similar. If there is, I have not found.

  I want to build an application compatible with its server push, but I don't want to use servlets and the jar provided by push SDK service.

  I think that the only thing I have to do in the server part is to get the PAP message with the required parameter 'address' (the device) using low level libraries.

  However, I have a problem of developing the application in the device. Using this code as a reference:
  http://docs.BlackBerry.com/en/developers/deliverables/21128/Subscribe_to_a_BPS_content_provider_1226...

  I see that the parameter 'address' is obtained in the createByteSubscriptionMessage method, but I don't see its implementation to get the parameter 'address' (got to the servlet subscription) because it is a native method.

  Thus,.

  1 - see the API:

  http://www.BlackBerry.com/developers/docs/7.0.0api/NET/rim/device/API/IO/messaging/BpsSubscriptionMe...

  What is the parameter 'address' obtained in the server (servlet subscription) part? The device ID? How can I get it back?

  2 - I could build the app-client just stay at step 6 and send the HTTP message on my way?

  Can someone help me?

  Thank you all.
  Kind regards.

  If I understand what you're trying to ask is how to get the address of the device your application to initiator to push aside server.

  If so, you can see an example here:

  https://developer.BlackBerry.com/Java/documentation/registering_to_receive_push_messages.html

  Basically, you can see the code example in the sample application compatible push built a HTTP message to send to its application server-side. Although this example sends the HTTP message in the format SDK expects that you don't need to use the SDK or the same format, but you can follow the example to send a simple HTTP message on your own server to send the information about your application requires server-side. For example, the link above shows that to get the address of the device, you can do this:

  Integer.toHexString( DeviceInfo.getDeviceId() )
  

  In side your application server, you must save the address of the device, then when you build the push request message that you use as the address of the device if you are using the low level SDK APIs (or enter this value in the field address PAP XML if not not using the SDK).

• ISE server receives requests for authentication of the bridge VLAN, not the IP Address of the switch management

  Hello

  A 3850 catalyst switch has VLAN 20 (10.18.4.32/29) defined on it, which has a 10.18.4.38 gateway:

  D01-01-BWY #show ip short int vlan 20
  Interface IP-Address OK? Method State Protocol
  Vlan20 10.18.4.38 YES manual up up

  A server of ISE (SNS3415) is connected to a port configured on VLAN 20, with IP address of 10.18.4.33.

  01-BWY-D01 has to a management interface of 10.18.4.17.

  I created this switch as a device network in ISE and activated the RADIUS config and then configured the switch with the following commands:

  RADIUS attribute 6 sur-pour-login-auth server
  RADIUS attribute 6 support-multiple server
  Server RADIUS attribute 8 include-in-access-req
  RADIUS attribute 25-application access server include
  dead-criteria 5 tent 3 times RADIUS server
  RADIUS-server host 10.18.4.33 auth-port 1812 acct-port 1813 borders 7 1521030916792F077C236436125657
  RADIUS-server host 10.18.4.35 auth-port 1812 acct-port 1813 borders 7 02350C5E19550B02185E580D044653

  radius of the IP source-interface GigabitEthernet1/0/1

  The problem:

  When I test the functionality of RADIUS using the following command, it fails. HOWEVER, the customer (switch) IP listed in the error log in the front door of the VLAN 20 (!):

  test the aaa group RADIUS server 10.18.4.33 auth-port 1812 Capita123 user radius acct-port 1813! new-code

  10.18.4.38 is the gateway IP address of the VLAN that hosts the servers of the ISE, I don't understand why its listed in error as IP device logs!

  ource Timestamp 2016-06-22 16:38:02.826 Receipt of timestamp 2016-06-22 16:38:02.841 Policy Server GLS-ISE-01 Event 5413, accounting RADIUS-Request dropped Reason for failure 11007 could locate no device network or Client AAA Resolution Check if the device network or AAA client is configured in: Administration > network resources > network devices First cause Could not find the network device or the AAA Client while accessing NAS by IP during authentication. Type of service Box NAS IPv4 address 10.18.4.38

  Other attributes ConfigVersionId 118 Port of the device 1646 DestinationPort 1813 Protocol RADIUS ACCT-status-Type Update-intermediate ACCT-Delay-Time 15 ACCT-Session-Id 00000000 ACCT-Authentic RADIUS AcsSessionID GLS-ISE-01/255868885/32 IP address of the device 10.18.4.38

  If I reconfigure the switch to the ISE - peripheral network and give it the IP address of 10.18.4.38 (the ip of the gateway), my radius authentication tests suddenly becomes successful.

  can someone clarify the situation what is happening here?

  I need to be able to define multiple switches by their unique IP addresses.

  Thanks for your time

  m

  Hello

  The only time I saw that it was due to use a deprecated command: radius server host.  There was a bug on the IOS XR platform as well.

  Could you please reconfigure your order of RADIUS by using the new command: radius server? And test again?

  The doc of Cisco for the new order:

  http://www.Cisco.com/c/en/us/products/collateral/iOS-NX-OS-software/iDEN...

  Thank you

  PS: Please do not forget to rate and score as good response if this solves your problem