Get a BSOD just after playing in Dark Souls (CRITICAL_PROCESS_DIED)

Similar Questions

• App gets paused / frozen just after start in gpu mode (audio continues to play)

  Hello
  You just bought a playbook!

  I have an existing Air application on android and iOS, I am now test it on playbook.

  With the rendering of the cpu, its normal, however when I put gpu in the descriptor of the app, the application stops all headphones rendering and the event just after starting the application, audio continues to play and the debugger remains connected.

  I am new on the playbook, I see there are power saving mode, maybe something is asleep?

  I tried:

  QNXApplication.qnxApplication.addEventListener(QNXSystemEvent.STANDBY, qnxStandby)
  
  internal function qnxStandby(e:QNXSystemEvent):void {
          trace("sent into standby ----------------------------------");
  }
  

  but nothing is ever attributed...

  The app works well on older iphones and android phones, I can't imagine I'm overloading the gpu.

  I use flash builder 4.6 and that's how I am structured:

  Pseudocode

  -addChild (loadingImage.png);

  -load game.swf

  -the addchild (game.swf) full,.

  -removeChild (loading image)

  When I load the main file game.swf, how it works, I get a few tracks, I can see it, but it's when he stops just of all activities and traces except audio.

  the swf so good, I can load this way using the cpu on the ok of the playbook, and I can load this way on android in cpu or gpu mode.

  Any help is really appreciated, thank you!

  -nick

  The problem was caused by the stage.quality example layout: stage.quality = StageQuality.LOW; This caused a freeze more often on the playbook. Being new the the playbook, when I read about the power API mode I thought what was related, but no, it was just a blocking of the application, where the debugger and audio arrives to stay connected and reading. hope this helps someone else.

• Just after to see if Eric Root was of Rochester, MN, and PV KS. How can I get rich email list?

  Just after to see if Eric Root was of Rochester, MN, and PV KS. How can I get rich email list?

  This who exactly are you referring to when you say, "How can I get off the copious list email? There is no list email however there are discussions on these forums, you can follow. To unfollow one, simply click a track at the top of the page.

• My Satellite Pro L Gets a BSOD after going into sleep

  My Satellite Pro L Gets a BSOD after going into sleep
  We spend whenever my laptop is asleep or in hibernation.
  When she comes back, it goes to BSOD.

  Can you help me please?

  What cell phone do you have exactly?
  What operating system do you use?

  Have you tried to reinstall the OS using the recovery CD?
  You update the OS?
  You update the BIOS?

• I get an error saying: "WSOCK32.dll does not work properly" after playing a game on a web site.

  Hey, I'm using windows XP on my IBM thinkpad T40.

  I noticed after playing a game website (don't remember the URL) that my WSOCK32.dll did not work properly.
  It is sending a bunch of errors at startup and saying things are corrupt.
  I think it's a virus, but my scanner come clean. worse yet, I can't play minecraft!
  Please help me...
  original title: WSOCK32.dll errors

  Hello

  -What happens when you try to play Minecraft in the computer now? Do you get any error messages or codes? If Yes, what is the error message or code?
  -What are the exact error messages / complete that appears at startup?
   
  Follow the steps mentioned below and check if the problem persists.
   
  Step 1: I suggest you perform the steps from the link below and check if it helps.
  How to determine and to recover from Winsock2 corruption in Windows Server 2003, Windows XP, and in Windows Vista?
  http://support.Microsoft.com/kb/811259
   
  Step 2: To be sure that there is no infection in the computer, you can try running the Microsoft Safety Scanner in it. The following link will help you get:
  Microsoft safety scanner
  http://www.Microsoft.com/security/scanner/en-us/default.aspx
  Note: The Microsoft Safety Scanner ends 10 days after being downloaded. To restart a scan with the latest definitions of anti-malware, download and run the Microsoft Safety Scanner again. The Microsoft Safety Scanner is not a replacement for the use of antivirus software that offers continuous protection. For a real-time protection that helps you keep your home or small office PC against viruses, spyware and other malicious software, download Microsoft Security Essentials.
  Hope this information helps.

• Get an error message when turning on the computer, then just get a black screen after the message saying cannont find script file c:/windows/run.vbs

  Original title: windows does not

  I have windows 7 and get an error message when turning on the computer, then just get a black screen after the message say cannont find script file c:/windows/run.vbs

  What can I do?

  Enter your bios usually with keys F2 or delete to the first powered

  Use default Optimize can be the F5 key and save and exit,

  Insert your installation disc or flash media and press F8 or F12 to boot on it

  Then use the recovery tools to run the Startup Repair tool.

  http://Windows.Microsoft.com/en-us/Windows/Startup-Repair-FAQ#1TC=Windows-7

• After playing the game the Sims 2, impossible to shut down the computer, get black screen

  Hi all

  I am running Windows 7 Home Premium 64-bit, and I recently installed the Sims 2 DVD Edition. The game itself works very well. He's not planting or lag or cause my computer is turned off. I can walk much and create characters; what I noticed is that some of the sound effects play, which is minimal.
  However, after playing the game and I'm going to shut my computer down, the screen just goes black and the computer stays on. The processor will run nothing will work. The computer just stays, but the screen remains black. He doesn't even go to the "shutting down" screen or anything. Straight black. I let it stay like that for 15 minutes just to see if maybe, it was just to take some time, but the computer still shuts.
  It normally stops if I do not play Sims 2.
  Original title: Sims 2 causing my computer does not shut down properly?
  I think I have Directx 11, because when I installed my graphics (ATI Raedon 7770) it updated automatically to that. I play other games like Skyrim here, which does not cause this weird close the thing. I installed the patch from EA Games for the game itself, as well.
  Help would be appreciated, because I'd really like to be able to play Sims 2! If one of the expansion packs resolves that it be so. Anything to solve this problem!
  Thank you.

  Hello

  According to the Windows Compatibility Center, the Sims 2 game is not compatible with Windows 7.

  http://www.Microsoft.com/Windows/compatibility/Windows-7/en-us/details.aspx?type=software&p=the%20Sims%202&v=EA&UID=1&l=en&pf=0&PI=0&s=Sims%202&OS=32-bit

  Method 1:

  I suggest you to install the program in compatibility mode and check if the problem persists.

  Please visit the sites below:

  To uninstall a program:

  Uninstall or change a program

  http://Windows.Microsoft.com/en-us/Windows7/uninstall-or-change-a-program

  To install a program in compatibility mode:

  Make older programs in this version of Windows

  http://Windows.Microsoft.com/en-us/Windows7/make-older-programs-run-in-this-version-of-Windows

  If the problem persists, then I suggest you to contact the program provider for assistance with the issue more on the site:

  http://support.EA.com/

  Method 2: Clean boot

  When the computer starts to boot, programs non-Microsoft will not be started and would avoid any interruption of their share.

   

  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7

  http://support.microsoft.com/kb/929135.

  Note: once you are done with the boot, follow step 7 article to set your computer to normal startup.

   

• Hi, I am trying to download the Lightroom 6 stand-alone version and get the following message just after a click of the extraction area: "the account was registered to another country. Please log out and log in with an existing account for this country.

  Hi, I am trying to download the Lightroom 6 stand-alone version and get the following message just after a click of the extraction area: "the account was registered to another country. Please log out and log in with an existing account for this country. "I'm in Namibia and tried to change my country of Africa, in the USA, but still the same problem. TIA

  Hi Annen,

  Please see the following forum topic.

  Try to buy the trial period in a different e-mail - message error "error in your account order has been registered for another country. Please log out and log in with an existing account for this country. OK ".

  Kind regards

  Sumit Singh

• Just after I turn on the laptop (before that turns on Vista) I get "cannot open volume for direct access.

  Just after I turn on the laptop (before Windows Vista turns on) the following message appears "cannot open volume for direct access.  What this mean and how can it be solved?

  Thank you

  Eddie

  Hi EddieLopezA,

  ·         Which version of Windows Vista is installed on your computer?

  ·         You have antivirus software on your computer?

  This problem may occur if another utility or service, for example a virus check program or a program disk monitoring, locked the partition before you try to run the Chkdsk.exe or Autochk.exe utility.

  I have some steps that may help you.

  Method 1: I suggest you to turn off all third-party applications and check if you have a similar question.

  To do this, follow these steps:

  1. open the start search box, type services.msc and click OK.

  2. in the Services (Local) list scroll the service concerned (for example auditor of virus or disk monitoring tool).

  3. right click on the service and select Properties.

  4. change the startup type to disabled for all applications 3rd - party that could be the cause of the blocking of Chkdsk problem.

  5. click OK/apply.

  6. restart the computer.

  Method 2: If this does not help, try to change the registry value and restart the computer.

  1. click on the start search box, type regedit.

  2. in the Publisher of the registry under the HKEY_LOCAL_MACHINE subtree, go to the following subkey:

  \SYSTEM\CurrentControlSet\Control\Session manager

  3 change the Boot entry run of:

  autocheck autochk * /r\DosDevice\C: (or other)

  TO:

  autocheck autochk *.

  Note: Change the settings of the REGISTRY can cause serious problems that may prevent your computer from starting properly. Microsoft cannot guarantee that problems resulting from the REGISTRY settings configuration can be solved. Changes to these settings are at your own risk.  If you want to edit the registry to fix this I urge you to back up your registry before proceeding.

  Links for:

  Unable to run CHKDSK

  http://support.Microsoft.com/kb/555484 (also applies to Vista)

  Hope the helps of information.

• Whenever I connect to my HDTV using vga, I get a BSOD, even tried with different pc tv/cable

  Hello

  Thank you for taking the time to read this! Yesterday that I tried to connect to an HDTV using VGA instead of someone else, worked well. Buy a vga cable today and connected to my 1080 p full hd Phillips and got a BSOD almost instantly. I tried some things and managed to do the work! Played skyrim for a little and left the laptop in sleep mode. Came, open upward and the screen stayed black, nothing I could do to get a Visual.
  Now, whenever I connect the cable I get a BSOD, it works with any other laptop, excludes the cable and television.
  I have updated all drivers in the list, checked my drive for errors using the good chkdsk, smart status on the disk is good, all withdrew. I know for a fact that my laptop works fine with extra monitors, we use all the time on my internship and as stated, it worked yesterday on another TV.
  Features of the laptop:

  ASUS n73jn

  processor Intel i5 460 m
  NVIDIA geforce 335 m
  Windows 7 64 bit
  4 GB ddr3 RAM
  the HDMI port is dysfunctional, just a few flickering screens filled with black lines, that's why I try vga. My guess is the hdmi port is DOA, but did not have a hd tv up to 2 years after purchase.
  
  News of the capture of blue screen:
  ==================================================

  Dump file: 093012-44382 - 01.dmp

  Crash time: 30/09/2012-18:57:22

  Bug Check String: SYSTEM_SERVICE_EXCEPTION

  Bug check code: 0x0000003b

  Parameter 1: 00000000' c0000005

  Parameter 2: fffff880'074259 cd

  Parameter 3: fffff880'029f90a0

  Parameter 4: 00000000'00000000

  Caused by the driver: igdkmd64.sys

  Caused by the address: igdkmd64.sys + 1e29cd

  Description of the file:

  Product name:

  Company:

  Version of the file:

  CPU: x 64

  Plant address: ntoskrnl.exe + 7f1c0

  Stack address 1:

  The stack address 2:

  Address 3 the battery:

  Computer name:

  Full path: C:\Windows\Minidump\093012-44382-01.dmp

  Number of processors: 4

  Main version: 15

  Minor Version: 7601

  The dump file size: 262,144

  ==================================================
  Thanks for your time!
  
  Greetings,

  Joachim

  Sorry, I was a little confused with the HDMI and VGA - continues to be the same advice.

  Looks like you have isolated to a hardware problem.  With the Intel graphics card is not posted, I have to wonder if the hardware problem is with the graphics card Intel

  FWIW - we have seen a number of overheating problems with the graphics from nVidia on your model.  Make sure the laptop is on a hard surface - and I would also use a filling of cooling (if possible) to ensure that the system is not overheating.

  Install a new copy of Intel video drivers is probably the most important thing to do now - and ensure that this card appears in Device Manager (and check in the nVidia PhysX tab to see if it appears here - even though I'm not familiar with this program).

  Try the video stress tests here: http://www.carrona.org/addldiag.html
  They can show that there is a hardware problem - but a lot of this will involve what video card works at the time of the test (even once, I don't have a lot of experience to make systems to change video card).

  Good luck!

• Recurrent BSODS even after the repair facility. Hardware failure? Driver conflict? Help, please!

  I was troubleshooting my BSOD for about a week and I need help.

  Here's where I am. I cleaned the chassis and reinstall all components. Then I ran memtest for 8 passes without error. Then I got Majorgeeks through my dieting rigorous anti-malware. And there is no malware on the computer.  I could not find any obvious driver conflict. So I ran SFC/scannow and it found some errors, he couldn't fix. So I finally did a repair installation to see if file system cleaning would eliminate blue screens.

  I always get a BSOD.

  Which leaves me with what? A bad GPU? Unknown driver conflict? Bad motherboard?

  Here comes bluescreenview log for you to look over. If someone could help me please clarify, I'd appreciate it really any help I can get.

  Thank you.

  ==================================================
  Dump file: 073014-27892 - 01.dmp
  Crash time: 30/07/2014-15:26:46
  Bug Check String: IRQL_NOT_LESS_OR_EQUAL
  Bug check code: 0x0000000a
  Parameter 1: 00000000'00000088
  Parameter 2: 00000000'00000002
  Parameter 3: 00000000'00000001
  Parameter 4: fffff800'03656666
  Caused by the pilot: NDProxy.SYS
  Caused by the address: NDProxy.SYS + c8856a
  File description: NDIS Proxy
  Product name: Microsoft® Windows® Operating System
  Company: Microsoft Corporation
  File version: 6.1.7601.17514 (win7sp1_rtm.101119 - 1850)
  CPU: x 64
  Plant address: ntoskrnl.exe + 75bc0
  Stack address 1:
  The stack address 2:
  Address 3 the battery:
  Computer name:
  Full path: C:\Windows\Minidump\073014-27892-01.dmp
  Number of processors: 6
  Main version: 15
  Minor Version: 7601
  Size of the dump file: 286 280
  Dump of file time: 30/07/2014-15:27:42
  ==================================================

  ==================================================
  Dump file: 073014-27892 - 01.dmp
  Crash time: 30/07/2014-15:26:46
  Bug Check String: IRQL_NOT_LESS_OR_EQUAL
  Bug check code: 0x0000000a
  Parameter 1: 00000000'00000088
  Parameter 2: 00000000'00000002
  Parameter 3: 00000000'00000001
  Parameter 4: fffff800'03656666
  Caused by the pilot: NDProxy.SYS
  Caused by the address: NDProxy.SYS + c8856a
  File description: NDIS Proxy
  Product name: Microsoft® Windows® Operating System
  Company: Microsoft Corporation
  File version: 6.1.7601.17514 (win7sp1_rtm.101119 - 1850)
  CPU: x 64
  Plant address: ntoskrnl.exe + 75bc0
  Stack address 1:
  The stack address 2:
  Address 3 the battery:
  Computer name:
  Full path: C:\Windows\Minidump\073014-27892-01.dmp
  Number of processors: 6
  Main version: 15
  Minor Version: 7601
  Size of the dump file: 286 280
  Dump of file time: 30/07/2014-15:27:42
  ==================================================

  ==================================================
  Dump file: 080114 43243 - 01.dmp
  Crash time: 08/01/2014 12 h 22:50
  Bug Check String: IRQL_NOT_LESS_OR_EQUAL
  Bug check code: 0x0000000a
  Parameter 1: 00000000'00000088
  Parameter 2: 00000000'00000002
  Parameter 3: 00000000'00000001
  Parameter 4: fffff800'036 has 3666
  Caused by the driver: vga.sys
  Caused by the address: vga.sys + 2a7f56a
  Description of the file: VGA/Super VGA video driver
  Product name: Microsoft® Windows® Operating System
  Company: Microsoft Corporation
  File version: 6.1.7600.16385 (win7_rtm.090713 - 1255)
  CPU: x 64
  Plant address: ntoskrnl.exe + 75bc0
  Stack address 1:
  The stack address 2:
  Address 3 the battery:
  Computer name:
  Full path: C:\Windows\Minidump\080114-43243-01.dmp
  Number of processors: 6
  Main version: 15
  Minor Version: 7601
  Size of the dump file: 285 832
  Dump of file time: 01/08/2014-12:24:17 AM
  ==================================================

  ==================================================
  Dump file: 080114-29359 - 01.dmp
  Crash time: 01/08/2014-16:14:11
  Bug Check String: IRQL_NOT_LESS_OR_EQUAL
  Bug check code: 0x0000000a
  Parameter 1: 00000000'00000088
  Parameter 2: 00000000'00000002
  Parameter 3: 00000000'00000001
  Parameter 4: fffff800'03663666
  Caused by the driver: USBPORT. SYS
  Caused by the address: USBPORT. SYS + 1156 has
  File description: driver Port USB 1.1 & 2.0
  Product name: Microsoft® Windows® Operating System
  Company: Microsoft Corporation
  File version: 6.1.7600.16385 (win7_rtm.090713 - 1255)
  CPU: x 64
  Plant address: ntoskrnl.exe + 75bc0
  Stack address 1:
  The stack address 2:
  Address 3 the battery:
  Computer name:
  Full path: C:\Windows\Minidump\080114-29359-01.dmp
  Number of processors: 6
  Main version: 15
  Minor Version: 7601
  Size of the dump file: 286 344
  Dump of file time: 01/08/2014-16:15:09
  ==================================================

  ==================================================
  Dump file: 080414-142319 - 01.dmp
  Crash time: 08/04/2014-21:24:14
  Bug Check String: IRQL_NOT_LESS_OR_EQUAL
  Bug check code: 0x0000000a
  Parameter 1: 00000000'00000088
  Parameter 2: 00000000'00000002
  Parameter 3: 00000000'00000001
  Parameter 4: fffff800'03662666
  Caused by the driver: ntoskrnl.exe
  Caused by the address: ntoskrnl.exe + 75bc0
  File description: NT kernel & system
  Product name: Microsoft® Windows® Operating System
  Company: Microsoft Corporation
  File version: 6.1.7601.18409 (win7sp1_gdr.140303 - 2144)
  CPU: x 64
  Plant address: ntoskrnl.exe + 75bc0
  Stack address 1:
  The stack address 2:
  Address 3 the battery:
  Computer name:
  Full path: C:\Windows\Minidump\080414-142319-01.dmp
  Number of processors: 6
  Main version: 15
  Minor Version: 7601
  Size of the dump file: 286 544
  Dump of file time: 04/08/2014-21:25:25
  ==================================================

  Thank you!

  IRQL_NOT_LESS_OR_EQUAL (a)

  This indicates that Microsoft Windows or a driver in mode accessed kernel memory paged at DISPATCH_LEVEL level or above.

  This bug check is issued if the memory paged (or invalid) is accessible when the IRQL is too high. The error that usually generates this bug check occurs after the installation of the faulty device driver or service system, BIOS.

  Bugcheck A, {88, 2, 1, fffff80003662666}

  0: kd > k
  Call child-SP RetAddr site
  fffff800'00b9c038 fffff800'03681169 nt! KeBugCheckEx
  fffff800 '00b9c040 fffff800' 0367fde0 nt! KiBugCheckDispatch + 0 x 69
  fffff800'00b9c180 fffff800'03662666 nt! KiPageFault + 0 x 260
  fffff800 '00b9c310 fffff800' 03685df3 nt! KeInsertQueueApc + 0x42
  fffff800 '00b9c370 fffff880' 04a96f16 nt! IopfCompleteRequest + 0xb63
  fffff800 '00b9c460 fffff880' 04a64fb7 usbhub! UsbhPdoInternalDeviceControl + 0x4fe
  fffff800 '00b9c4b0 fffff880' 014da2b0 usbhub! UsbhGenDispatch + 0 x 57
  fffff800 '00b9c4e0 00000000' 001eed06 ffusb2audio + 0x52b0
  fffff800 '00b9c4e8 fffff880' 016884ba 0x1eed06
  fffff800 '00b9c4f0 fffff800' 0368c85c tcpip! TcpPeriodicTimeoutHandler + 0 x 714
  fffff800 '00b9c570 fffff800' 0368c6f6 nt! KiProcessTimerDpcTable + 0x6c
  fffff800 '00b9c5e0 fffff800' 0368c5de nt! KiProcessExpiredTimerList + 0xc6
  fffff800 '00b9cc30 fffff800' 0368c3c7 nt! KiTimerExpiration + 0x1be
  fffff800 '00b9ccd0 fffff800' 036798ca nt! KiRetireDpcList + 0 x 277
  fffff800'00b9cd80 00000000 00000000' nt! KiIdleLoop + 0x5a

  ffusb2audio.sys (driver of USB 2.0 audio Focusrite) refers to an invalid memory (0000000000000088).

  0: kd > lmvm ffusb2audio
  start end module name
  "fffff880 ' 014 d 5000 fffff880 ' 014e7000 ffusb2audio T (no symbol)
  Loaded symbol image file: ffusb2audio.sys
  Image path: ffusb2audio.sys
  Image name: ffusb2audio.sys
  Timestamp: Wed Oct 13 11:40:18 2011

  Very old driver, I recommend just completely uninstall the software and remove the device (if any).

  Kind regards

  Patrick

• Why do I get the BSOD?

  In recent days, I've known BSOD 7 or 8 per day. This includes "MEMORY_MANAGEMENT", "SYSTEM_SERVICE_EXCEPTION", and sometimes it does not give a reason, just a list of suggestions. I tried it without success. I ran the Diagnostic tool and it told me nothing. I don't know where are the minidump files, but if someone can tell me, I'll try and bring it to the top. In the meantime, I need help. It is impossible to get anything done.

  Hi Zack,

  Thanks for posting your question in the Microsoft Community forum. I understand that you get the BSOD error under windows 7.  I would like to help solve you the problem.

  Before troubleshooting, provide us with information.

  1. What is the brand and model of the computer?

  2. what security software is installed?

  3. don't you make changes to the computer before the show?

  This problem may occur if one or more of the modules Random Access Memory (RAM) that is installed in your computer are damaged or if the RAM configuration is incompatible. It can also be any device, its pilot or related software.

  We can analyze the minidumps if make you it available to the SkyDrive or another file
  sharing sites.  If you have problems to download the copy of minidumps
  for the office or in the Documents folder and download them from there.

  ZIP or download the content of the C:\Windows\minidump

  Use SkyDrive to upload collected files: http://social.technet.microsoft.com/Forums/en-US/w7itproui/thread/4fc10639-02db-4665-993a-08d865088d65

  Additional information.

  I suggest you to refer to this article to check if this help.

  Resolve stop (blue screen) error in Windows 7
  http://Windows.Microsoft.com/en-us/Windows7/resolving-stop-blue-screen-errors-in-Windows-7

  Important: System Restore will return all system files not as documents, email, music, etc., to a previous state. These files of types are completely affected by the restoration of the system. If it was your intention with this tool to recover a deleted file to non-system, try using a file instead of system restore recovery program.

  Important: while performing the check disk on the hard disk, if bad sectors can be found, then check disk will try to repair this sector. All the data available in this area may be lost.

  Custom installation WARNING: If you format the hard disk during the installation, the data files are saved in a Windows.old folder on the partition you installed Windows 7.  However, you should always back up the files. If you have encrypted data files, you may not be able to access them after installing Windows 7. If you have backed up your data files and then restored after Windows 7 is installed, you can delete the Windows.old folder.

  If you need help on this particular issue or any other related Windows issue, let know us and we will be happy to help you.

• Lost my sound just after hibernation of the Satellite

  Hello forum,.

  I lost my sound just after my computer in hibernation.
  I did a google on the issue and people have said that it his mixer and/or driver disappeared.

  In my case, but I can still access the console and windows says that my audio driver is fine.

  Also, when I click on the mixer, the green bar moves to showing that the sound is played.

  Any suggestions on the problem would be very appreciated.

  Information:
  Operating systems: Windows 7 [64 bit]
  Toshiba model: SATELLITE L650 - 12 p
  (If more information is needed please ask)

  Thank you very much.
  :)

  Hello

  What version of currently installed BIOS?

  You have installed the latest BIOS and Driver Sound on the Toshiba site?

• I get the BSOD when trying to install Bluetooth on Satellite A200

  Hello!

  I have a problem:

  When you try to install the bluetooth for the first time since the reformatting of the hard drive, I get the BSOD. During its restart and tries to launch the bluetooth I, once more, get the dreaded blue screen of death.

  I have Vista home premium 32 bit
  I recently reformatted the hard drive and reinstalled the operating system
  I checked for viruses, etc., and it's clean...

  Don't know what else to say...

  How can I resolve this problem and install the bluetooth?

  It is very mysterious, because the laptop should run fine after using the recovery CD.

  In your case, you should check if your BIOS is up to date. If this isn't the case, then update the BIOS. But to be honest, I guess there could be a hardware problem.

• Get the BSOD

  No idea what could be causing BSOD on my new laptop Lenovo Y510P? I'm under Win 8.1 and have the latest nVidia drivers installed. The error message is

  '

  

  Your PC has encountered a problem and needs to restart. We are only collecting the error information, and then we'll restart for you. (XX % complete)

  If you want to learn more, you can search online for this error: DRIVER_IRQL_NOT_LESS_OR_EQUAL (igdkmd64.sys)

  This problem occurs after playing for several hours. I did some research online and tried to reinstall the Intel drivers, but couldn't because of driver is not being validated for my hardware. Thank you.

  Well, I tried it download driver from the website of lenovo and after it has been installed, it is an update and installed it. So far seems to be stable. Thank you