Get a message to remove and check color cartridge. What am I supposed to control?

HP Photosmart 2575.

Can't see anything useful in the documentation for the printer.

Is this just a cartridge duff?

R

Hello Richard

Still having this problem? Looks like it might be the cartridge or dirty contacts. The following article explains how to fix the mistakes of the print cartridge. The print cartridge errors

If the problem persists after going through the article, I suggest to try a new cartridge to isolate the problem. If the HP ink cartridge is still within its warranty you can contact the support to replace/Exchange it. Cartridges have their own guarantee.

Control of the HP product warranty

Tags: HP Printers

Similar Questions

  • Printer send error reports all-in-one HP PSC 2355 'remove and check color cartridge '.

    When sending of works for the all-in-one printer HP PSC 2355 of my laptop Acer Aspire with Windows XP and a USB connecton,

    I get an error message on the screen flip to say remove and check color cartridge. I do this, but nothing has changed and now the switch does not work either as a result I can't do anything, it's just frozen.

    If anyone can help I would be very gratefull, but please remember that I am a complete novice with these things.

    Thank you

    daisy70

    Hello daisy70,

    Because the printer is frozen we will start by doing a reset of the printer. Instructions available via this link and posted directly below as well.

    Reset the printer

    Follow these steps to perform a reset of the product.
  • error 'remove and check color cartridge '.

    I have a HP all in one 7400 printer / / scanner/copier/fax. All of a sudden I get an error 'remove and check color cartridge. I made several times and cleaned all of the excess ink that I see. The printer/turn off has no effect. Disconnection/reconnection of power also no effect. Any suggestions on other solutions?

    I had the same problem with my HP Officejet 7410 so cleaned the contacts of carriage and ink cartridge by directions on this link:

    http://support.HP.com/us-en/document/c01423559

    After my first attempt to cleaning these contacts, I reinserted the cartridge and tried to print again, but I got the same error message.  Then I removed the cartridges (color & black) of their slots and after transport, I discovered the lower part of the cart was covered with ink, pointing a flashlight so... using more than a dozen cotton pads, I cleaned the bottom of the cart at best.  In addition, thinking that maybe the ink cartridge no was not manufactured exactly the right size and shape, when I inserted the cartridges in their slots I slightly pressed them to make sure the contacts could touch.

    I was happy to see that now the error message is gone and my printer print again... Oh well, at least for now.

  • Suddenly, my 4215 all in one HP printer error message reads "remove and check right cartridge".

    My all-in-one 4215 printer suddenly flashes an error message on the screen saying "remove and check right cartridge"... For what I'm checking, it is unclear. I deleted and reinstalled the cartridge and it seems OK to me... It is not empty, and the last thing that he printed was fine... Help!

    I am betting that the printer or the ink cartridge contacts are dirty. This happens over time. The document below will guide you through cleaning the contacts. Let me know what happens.

    http://goo.GL/9oXc9

  • Officejet 7410 - Remove and check color cartridge error message

    THiiS comes well when printing. Removed, checked and put back, and it was no help. Replacement cartridge and the message remained. Cannot print even in B & W with color removed cartridge. Can not scan or fax then this error message is displayed and I can't delete it.

    Use Office Depot cartridges rebuilt for more than a year without any problems before.

    Updated - I sent an e-mail to HP support. They responded and gave me the order to use to print a Tap 10 report. Had to go to FedEx Kinko's to have scanned and put on a memory stick ($0.99). And sent to HP as an attachment. Two hours later, they responded stating that the cartridge was bad. Strange that took place with 2 cartridges Office Depot, but in any case I took the cartridge back to Office Depot and they exchangec (more than $8.00) for genuine HP. Plugged inside and problem solved. Congratulations to Office Depot and HP support.

  • OfficeJet K80xi, 'remove and check color cartridge '.

    I changed the game - twice - still the color cartridge I reove message and check the color cartridge.  It prints well, but cannot fax and need to shut down and reboot to make certain functions

    Hello

    Please follow the steps mentioned in the link below.

    http://support.HP.com/us-en/document/bpa00299

  • Remove and check color HP PSC 1610 printer cartridge error message.

    Original title: remove and check color cartridge

    My printer HP PSC 1610 rpet 'Remove and check color cartridge'. After that, I press 'ok' and the message still appears. What is the problem with the printer? Thank you.

    Hey cobra10,

    Fortunately, there is an article by HP Knowledge Base that talks about this problem. Please follow the solution provided in the article below to solve the problem.

    Remove it and check [color / black / photo] error message appears on the screen of control of product and the product does not print.

    Kind regards

    Shinmila H - Microsoft Support

    Visit our Microsoft answers feedback Forum and let us know what you think.

  • Remove and check color on Officejet 7310 cartridge

    I need all possible solutions for a new error message - remove and check color cartridge.  I work on a Mac OS 10.6.8 and aired recently in a lot of printer problems.  My HP Officejet 7310 was low on black ink, so I replaced the cartridge and it aligned properly without any problem. Later, when I tried to print labels, it gave me an error message and flashing exclamation point "remove and check color cartridge.  The color cartridge is not new and has not been replaced recently. It is half full. I did remove the cartridge and saw nothing wrong, so I re-inserted it. Once again, the same message. Then I tried to clean the copper contacts, as I've done it before. Still no change. I did a search for solutions and tried the following supposedly a HP technical support:

    Solution 1:

    Follow the steps below to power cycle your all-in-one:

    1. check that the device is on. Unplug the all-in-one power
    and unplug the USB/Ethernet cable.
    2. wait 30 seconds.
    3. connect the power supply only.
    4. Repeat steps 1-3 two times more.
    5. on the third time after plugging the unit running, reconnect the cable to the
    All-in-one to your computer.
    6. check the feature;

    Solution 2:

    Remove the cartridges from the printer and follow the steps below:

    1. clean the copper contacts of the cartridge with a slightly moistened cloth or a cotton swab
    with water distilled, filtered, or bottled. The tap water may contain contaminants that can
    damage to the ink cartridges.
    2. clean the contacts in the print carriage, inside the printer. Transport print contacts are made of copper and are found in transport, so that they line up with the contacts of the cartridge when the cartridge is installed.

    Solution 3:

    Reset the all-in-one to the default settings by using these instructions:
    1. disconnect the power cable from printer when the printer is on.
    2 press and hold # and 6 while plugging in the power cord.

    Continue holding until it displays the message Reset full Semi the front panel of the all-in-one device.

    NONE of them worked.  I am connected by USB as ever, our WiFi seems to remain stable.  Can offer you solutions to the problem?

    Kudo!  Kudo!  of course, the voltage is too low or the amps available short-term (short-term reserve amps.)  with 2 good carbatteries, I could establish free error initialize, all in this one works very well. Make sure the power supply is adequate, thank you and congratulations to all of you!

  • HP2410xi error message remove and check print cartridges.

    All-in-one HP 2410xi.  Has been printing with the current cartridges and I got the message "remove and check ink cartridges" I removed and checked and they are about half full, no leaks.  Put them back in and same message.  Machine unplugged and restarted, same message.  I removed the cartridges, unplugged, turned back.  Screen says load cartridges, same message.

    This remove and check print cartridges can help:

    http://support.HP.com/us-en/document/c00054462

  • On the printer error message - remove and check right cartridge

    How to fix the error message: "remove and check right cartridge" you've done many times, and nozzle cleaning cartridge. Also, I turned off printer, but nothing has changed for HP Officejet 7210 all-in-One help needed

    I finally removed the theoffendin cartridge and replaced by a new HP cartridge and, now, my printer works great - no error message and printing is perfect.  The 'bad' cartridge was a remanufactured, which has worked well up to this point, but I will in the future hold with HP.  Hope this will help you.

  • "remove and check ink cartridges" error on HP 2401

    ORIGINAL TITLE: Print printer print

    Recently, I replaced print cartridges on my HP 2401 printer.  Printer has worked for a few weeks, and now an error that says: "remove and check print cartridges.  I did this (interface buvardages print cartridge on paper towel) and put them back in, but get the same error.

    When I replaced the cartridges a couple of weeks, it does not ALIGN cartridges at startup.  Costco using refills... suggestions?
    Ron

    Hi Ron Flamm,

    What operating system is installed on the computer?

    I suggest you try the steps from the following link:

    Error message: remove and check ink cartridges
    http://h10025.www1.HP.com/ewfrf/wc/document?LC=en&cc=us&DocName=c00054462

    Remove and check cartridge

    http://h10025.www1.HP.com/ewfrf/wc/document?cc=us&LC=en&DLC=en&docName=c00042821

    I suggest you to contact Hp to know that the problem is with the printer.

  • Remove and check print cartridge error sign

    I have a HP Photosmart C4150 all-in-one printer.  The ink cartridges are newish.  When I try to print a web page or a page in MS Word, the message remove and check print cartridges appears.  I removed both cartridges and re - install, but without success.  I have a MacBook Pro.

    How long were these cartridges in the printer? You can try to clean the contacts by following the steps below.

    First step: remove and check cartridge

    The print cartridge cannot have a full electrical contact with the printer. Can help to remove, and then reinstall the cartridge. To remove and inspect the cartridge, follow these steps:

    NOTE: HP does not guarantee the quality of remanufactured or refilled cartridges.

    1. Make sure that the printer is turned on. If it is not lit, press the power button.

    2. Open the printer cover, and then wait the carriage is idle and silent.

    3. Press gently on top of the cartridge to release it.

      Figure 2: Removing the Tricolor cartridge

    4. Slide the cartridge out and review it.

      Warning: Do not touch the electrical contacts or the ink nozzles.

      Figure 3: Electrical contacts and nozzles

      1 - copper electrical contacts

      2 - nozzles

      • Check the electrical contacts for debris.

  • (hpALL-IN-ONE 4215) REMOVE AND CHECK RIGHT CARTRIDGE?

    Basically:

    I bought a new ink cartridge. Put them in the wrong spot but removed and put in the right place.

    Error message showed up after I plugged the printer into.   "REMOVE AND CHECK RIGHT CARTRIDGE".

    I removed the ink cartridge and it still does not.

    I unplugged the machine completely and plugged back that it did not work.

    IF ANYONE CAN HELP? ANY SUGGESTION OTHER THEN ABOVE?

    short of money and I need to print things.

    Help, please!

    Well, I replaced my black cartridge with a new one, problem solved ;-)

  • HP PSC 1600: "Remove and check right cartridge" Error Message

    First had error message with a reremplie cartridge.  Could not see something wrong and could not erase message so bought a new cartridge.  It worked once or twice, now have the same message.  I have removed and replaced several times without success.   What I'm looking for? Have turned off printer for days, but when lit, same message comes.  I can't wait to go buy a cartridge if the same thing will happen.

    This document explains How to fix the errors of rejection cartridge with the printer. If after completing the document, you still have the same error, the printer must be replaced. You can contact the HP Support by clicking here and filling out the form below to see what options are available.

    Please let me know the results after following the above.

  • Remove and check cartridge error message

    For officejet 6210 all-in-one

    7hr power outage at home, got the message "remove and check color cartridge '.  This is done several times without success. Color cartridge was working properly before the power failure.   tried power off and on again - no, chance - try blowing off/not brushing off contacts in printer and cartridge no chance.

    any suggestions short buy cartridge nrew with hope it works

    Hi dongig,

    Is this a new cartridge HP OEM or revised?

    You have another cartridge installed in the printer?

    Clean the face of the cartridge and the electrical contacts on the back of the print carriage.

Maybe you are looking for

  • Replacing the battery of Qosmio G30-204

    Hi people, the current battery I have takes about 10 minutes after full load.So, I think to replace. The battery I have right now is a PA3475U-1BRS. I can get my hands on a replacement but the model is:PA3476U-1BRS It is the same shape and everything

  • Pavillion dv6: Sytem disable the key

    Hi all Put wrongly in my possword 3 times and have received a 'key to disable system' 68912132. Help, please!

  • Best way to unbundle clusters of clusters table table?

    I've done works great but I have this feeling that when I'm not looking for someone will post it for the assignment of Rube Goldburg. I convinced myself there must be a better way to access the controls cluster buried inside tables? As you can imagin

  • RS232 - error handling

    Hello I read continuous data from RS232 interface. During communication, there can be that the remote console is turned off due to maintenance work. How can I determine the connection lost? The error on the function 'number of bytes to Port' and "Rea

  • Activate an OEM of Vista on another computer?

    original title: xp or vista Hello! I have a pc that I built myself XP and a VISTA pc I bought 3-4 years ago. Now, I want to build a more powerful PC by using one of the two operating systems that I have. The XP cd operating system was purchased from