Get a SH68-C68-S cable by a steel sheet

Similar Questions

• SH68-c68-S cables and SHC68-c68-S are interchangeable?

  The SH68-C68-S cable is specified for the UMI-7764 interfaces and the SHC68-C68-S is specified for the UMI-7774, but these cables are both compatible with the UMI-7774?

  Thank you.

  Hello

  Although the cables do not seem to be very similar, it is not recommended to use these interchangeable cables. The main difference is in the internal wiring. The SH68 cable is also used for the DAQ cards and have a common ground, which can create problems with the maps of cable movement. The following knowledge base articles provide more information and specifications.

  [1] What cable does with my gear OR Motion?

  can [2] I use a cable movement with a M Series DAQ card?

  Kind regards

  Huntington

• Qosmio G20-102 TV TUNER: how to get this to work - what cables are required?

  Hey everybody,

  I just installed vista on my laptop QOSMIO G20-102 (PQG20), I have media library now.
  My laptop came not like MEDIA CENTER EDITION, it came under the home edition of Windows XP (laptop purchased in July 2005).
  I got 3 cables which I have no idea how to use...
  laptop was purchased in Dubai/Emirates and I live in Malta

  These are the cables >
  http://img399.imageshack.us/img399/7189/dsc00780gi6.jpg

  Now for my question (s):
  1 which of these cables do I need? Im just trying to figure out how to get my satellite tv or digital cable to work on my laptop.
  2 antenna adapter (see picture) is not for coaxial cable, what can I do?
  3 I did WINDVR more due to the upgrade of vista, Media Center Gets the job done but I don't know what to do... This guide has confused me even more > http://www.microsoft.com/windowsxp/mediacenter/using/setup/settop.mspx
  I don't have IR control cable, I do not have a remote sensor (but I have some sort of built in the remote sensor on the front of my laptop.

  I'm looking for advice as for example buy this, get rid of it, install this etc...
  Please, anything that can help is appreciated!
  If you need information more just ask, I am here ;)

  Yours sincerely
  Ishmael

  Hi ismael,.
  I'll try to help with that, but it's a long way to the road...
  I don't know what Tv system is used to Malta (Pal)?

  The best way to set up your TV's with Media Center 2005 edition.
  Cables:
  Check the back of your cable TV installation box and find the composite or SVHS output. If you have only the composite, you can use the composite cable of the posted image. If your TV decoder has the SVHS, so you should use, to the better image than composite. You must obtain a SVHS cable for this.
  Look for the audio output rca, too. Mix with the composite cable for the audio Qosmio.

  But you must have:
  1 control cable IR, for media center 2005 configuration as well as your TV decoder. It is cable connected to the remote sensor (see fact sheet on the back).

  2 sensor for your remote control and configure it with the remote control of your TV decoder. In this way, you can control the receiver cable channels, using the remote control for your Qosmio G20 media center edition.
  Recovery: you can change the channels on your TV decoder using the qosmio remote control.

  3. remote control for you media Center 2005, one that came with your Qosmio g20.

  Open the TV on Media Center 2005 configuration and follow all the steps required for installation.
  You must follow the guide, as is explained in the image you posted:
  http://www.Microsoft.com/windowsxp/mediacenter/using/Setup/SetTop.mspx

  If you have all these cables, you can use the Qosmio player to watch TV. It is not tied to windows OS.
  Here, simply connect the coaxial cable and let the Qosmio player search for available channels in your area. Qosmio player has the opportunity to set the colour TV system in any part of the world. all NTSC regions in all PAL regions.
  If you have the remote control for your Qosmio, TV keys will work directly with the Qosmio remote sensor on board, without needing the external sensor of Microsoft.

  I hope this helps you
  Francisco

• On occasion while gaming, I get a black screen with "Cable no." WARNING.

  Possible USB problems

  I'm retired and a player.  I play every day.  In may, I started a new game (Diablo 3).  At that time, I also installed a new mouse software.  This is a Logitech M310 wireless and requires a Nano-receiver being connected on a USB port 24/7.

  As I started playing back in may, every 7-10 days while I'm in the game, I experience what I call a black screen of death (as the BSOD).  A moment that I'm in the game, then in the second place, my screen goes black and I see the warning "no cable".  I can still hear the game sounds and music.  No matter what I try, I can't restore the connection of monitor.  CTRL-ALT-DEL to bring up the master may work, but not on the screen.  The only way is down/cold power system restart.  I reboot in safe mode and then restart in normal mode.

  There is a problem in Diablo 3 (D3), it causes 'stretch' or 'video' stuttering.  There is a program in Windows 7 called Ready Boost.  It allows you to insert a flash drive into a USB port, and prepares the drive to let the game use the extra memory of training, may reduce stuttering/stretching.

  I use program flash drive/Ready Boost for about two weeks, now with a flashdrive of 18 GB and a black LAWN known on August 1.  That day I could not recover from the accident and had to take my computer in the store, so they could repair (the computer also let me not use the monitor of my wife so I could understand what was wrong).  Their tech programs could not find no reason for accidents and also could not reproduce them.  There is little to dust in the video card, so they thought it was card gel to prevent burning (but why close the monitor and not the computer, what is true?).

  Got the computer back on August 4 and had another black TURF on Sunday 12 August, where I was able to recover and return to play my games.  Then, on Monday, August 13, there was another which I was also able to recover.  Then, on Monday night, when I turned off the computer for the day, he hung up the shutdown sequence, he showed to the closing screen but could not go beyond and trotted in.  Finally, after about 3-5 minutes, I pulled the plug to turn off it (may not have something to do with it, but seems a bit strange - never had it before).  This morning when I turned on the computer, he began immediately with the black SOD - got the standard WARNING This "wireless".  I tried what I could to recover from the accident but reboot several times (after closing) did not work.  I thought that I had to take the computer back to the store, so (while I still had the computer running and screen always telling me no. cable) I pulled out the 16 GB flash on the USB disk - and immediately, opening (after login) screen was displayed, and everything has worked fine since.

  I tried the D3 Tech and Bug Forums, and it seems that a lot of other players of similar experience black SOD while in the game.  The only thing in all of this that has something in common (on my system, I will go back and see this post in the forums for others) is the port USB/connections.  The new mouse installed in May when I started playing D3, started black SOD (BTW, never had any problems before this date) which requires the nano, the extra flash drive connector, I installed and the display on the screen when I pulled the drive from the USB port.  There is nothing else that is related to the other.  But, I know to look for the cause and deflagrates solving problems and it seems the program/USB connection is the likely suspect, so far.  I wonder if something inside the D3 runs at some point with the USB program?

  I apologize for the long post, but I'm putting everything out there so someone can recognize a problem, I'm not familiar with that.

  I have a generic computer built to my specs, by a local company, 2 years ago.  I am running Win 7 Pro, quad core, 64-bit CPU i7 860 2.8 GHz, not overclocked, 8 GB of RAM and a NVIDIA GTX 295 video card. And as I said, I've never had a problem with this computer until May this year. I have it on all day from 06:00 to 23:00 and have enough fans installed to power a helicopter, and clean the entire system (air jet) every 3-4 weeks.

  I appreciate that you could help me with this.

  Kind regards

  Johnny2

  Most of the black screen errors are related to the video card:
  -Make sure that it gets cooling (that the fan runs and it has not filled with dust/hair/etc.).
  -Make sure that the power cord is firmly in place (and that the card is in place in its housing).
  -Make sure you have the latest drivers from the website of the manufacturer of the video chipset ( http://www.nvidia.com )

  Step 2-update of all drivers on the system, then get all available Windows updates.

  An additional step - if make you it work, immediately put a system restore point.  This does not always work, but it is one of a few patches semi reliable for problems KSoD (Black Screen of Death).

  Make sure you have all the updates for the game.

  Finally, reinstall Windows if all else fails.  Get all the Windows updates available - so make sure you update the drivers from the website of the manufacturer of the device (no Web site of the manufacturer of the PC, no update of Windows with the update function of the driver in Device Manager). Then visit again and again - update Windows until no more updates to date are available.

  If problems persist, try another video card.

• Why don't I get sound with my HDMI cable connected to the TV?

  I have a specialist HDMI cable to connect my macbook to a monitor or a TV. I have the good picture but no sound. Which can be fixed?

  Which macbook you have and what port you connect the cable "specialised" HDMI to?

• Where to get cheap for Equium power cable

  Can anyone tell where to find a power cord AC cheap for an out of warranty Equium laptop.

  Hello

  I think that these spare parts that you can only buy from Toshiba service partner.
  ASP is able to order these parts directly from Toshiba.
  Therefore, contact the service guy in your country and ask offers.

• Where can I find the maximum bit rate for the NI SHC68-C68-RDIO2 cable

  Search on the web site without success - maximum performance measured is an important specification!

  Hello

  in this case, we should look at the whole system. 1082 chassis is large enough for 2 cards. What are the other maps are built into the system?

  The 7021R SMU has in the datasheet of a limit on the transfer rate of data to the SMU Backplane of the chassis, which is 500 MB/s.

  I advise you in this case through the technical sales department. You can reach me by phone or email:[email protected].

  We can discuss the whole of the project.

  Best regards

  Lucia

• How to get list of vm to information in an excel sheet

  Hi all

  I'm new to vm ware power cli...

  My task is to get a list of all the vm info (machine virtual name, host name, State, ipaddress, osname.. etc)...

  I created a command to generate the expected result

  Get - Vm | foreach-object {Get-Vmguest $_.} Name} | where {$_.} State - eq "Running"} | Select the host name, VmName, IPAddress, OSFullName, State | Export-Csv nylab.csv

  But I want to create a script that run periodically to generate the result into an excel sheet...

  Please help me...

  In the above command IPAddress returns 'system.string []' in the worksheet excel instead of the ip...

  But in vmware powercli guest returns it in the form

  HostName: testwas7

  VmName: RHEL53-SA78A 10.128.34.249

  IPAddress: {10.128.34.249, fe80::20c:29ff:feda:2 b 65}

  OSFullName: Red Hat Enterprise Linux 5 (64-bit)

  Status: running

  Please help this too...

  Those who are most probably of host where the VMware tools are not installed or where the host is turned off.

  ____________

  Blog: LucD notes

  Twitter: lucd22

• I get an error, "cannot view XML input using XSL sheet" when I try to install a mass storage driver.

  Original title: cannot view XML input using XSL sheet

  I can't install a mass storage driver. Message "Cannot view XML input using XSL sheet".
  Unspecified error.

  Hello

  I would have you post your query in the MSDN Forums, because it is addressed to an audience of it professionals.

  Your question would be more out there.

  Check out the link-

  http://social.msdn.Microsoft.com/forums/en-us/categories/

  Back to us for any issues related to Windows in the future. We will be happy to help you.

  Thank you.

• How can I get the filenames DO NOT print on a contact sheet?

  I want to print 35 small images on a single page, but I don't want the name of the file printed beneath them. It seems to occur automatically by selecting "contact Board' to print. can I disable this feature?

  Hello

  Thanks for posting your question on the Microsoft forums.

  I want to inform you that you can not delete the file names of the contact sheet.

  Please post back if you have problems related to Windows and we will be happy to help you further.

• TBX-68 and PCI-7344 digital IO connector

  Is it possible to use this combination and what armoured cables are recommended?

  Thank you.

  The TBX-68 block uses the same connector 68 broches.050 series D-type female as the UMI-7764 interfaces.  So that all the NI SH68-C68-S cable connects to the TBX-68 and the VHDCI 68 pin compensated male connector on the 7344.  The NOR recommended cable is the 0.5 m registered under the part number 186380-0R5.

• SH6868 vs SH68-68-D1

  Hello

  I have a 6534 of PCI and PCI-6602, SH6868 connector will work for one or the other?  What is the difference between the SH6868 vs SH68-68-D1, as I couldn't find on the two Web sites?

  http://sine.NI.com/NIPs/CDs/view/p/lang/en/NID/11801

  http://sine.NI.com/NIPs/CDs/view/p/lang/en/NID/11797

  Thank you

  Russell

  Hi Russell,

  Thanks for posting and welcome to the Forums EITHER!

  SH68-68-D1 is currently on the 6534 and 6602 at the recommended cable product pages.  There are two main differences between the SH68-68-D1 and SH6868 cable:

  1. The SH68-68-D1 cable lets four unconnected pins: 19, 35, 43 and 56
  2. The wires are twisted together are different between the two
     cables.  On the D1, each digital line is paired with floor-digital
     help reduce noise and interference.  The regular SH6868 doesn't have the
     same pairings in mind.
  
  That said, the two cables transmit signals straight through
  (i.e. pin 1 is on the other end to pin 1).  The SH6868 needs
  so technically usable with both devices, but would probably be more
  sensitive to noise and interference.  If you try it and have a
  problems with signal integrity, I would say looking to get
  the recommended cable.

  -John

• This cable or accessory is not certified and may not work reliably with this iPad.

  I get the following message: "this cable or accessory is not certified and may not work reliably with this iPad." Oh, and the message repeats every so often. At first, I thought maybe would it be the earbuds, but I get the message, even though no headphones are attached. I get the message when no cable is attached. This occurs even if no cable is fixed. A hypothesis as to what is happening there?

  < re-titled by host >

  These alerts can appear for several reasons: the cable is defective, damaged or may not be certified by Apple, or your device might have an accumulation of dirt or damage. Follow these steps:

  Before you try the following steps, make sure that the USB cable and your port is clean!

  1. Restart your iOS device.
  2. Try a different cable certified by Apple or a charger.
  3. Make sure you have the latest version of iOS.
  4. Contact Apple support to implement the service.

  I hope that you will charge your iPad in no time!

• Tecra 9100: Media Test failure - check cable then turns off

  Hello

  I have a Tecra 9100 and I got it at low cost and hoping to make it work for my son to do his homework on but its got a problem.

  First he came without a hard drive (on order) then when I turn it on I get + media test check the cable failure then it stops.
  I ve disabled boot from LAN and set the default Bios and tried to boot from the CD drive that starts to install ok (I know he won t get far because I ve without HARD drive)

  But he died just completely sometimes in the beginning, sometimes at half way.

  One can shed some light on the subject.

  Thanks rob

  Maybe its overheating? Search for dust in the radiator. You can blow the dust using a can of compressed air.

  Also test the memory. You can get memtest www.memtest.org and put it on a floppy disk or a CD.

• HP ENVY 17 J053EA: 2nd Sata HARD drive cable

  Anyone know where I can get a second HARD SATA cable from? Have tried searching online!  None is available.

  Thank you very much, looked at the site HP Web for part number and search for it through Google did not come with anything.