Get a weak signal when connecting to internet

* Original title: my problem is that my computer will have 3 bars of connection while my girlfriend in the same room will have full signal and I have no idea what the question is can someone

I tried reseting my adapter and update the driver still no help

Hello

1. are you using the cable or wireless Internet connection?

2. do you have a router connected to a computer?

Please refer to the links and check if it helps.

Why the my wireless signal strength is so low?

http://Windows.Microsoft.com/is-is/Windows7/why-is-my-wireless-signal-strength-so-low

Troubleshoot low wireless signal quality (applies to Windows 7 as well)

http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-low-wireless-signal-quality-problems

10 tips to help improve your wireless network

http://www.Microsoft.com/athome/Setup/wirelesstips.aspx#fBid=hq7zl63PiZ9

Why is my Internet connection so slow?

http://Windows.Microsoft.com/en-us/Windows7/why-is-my-Internet-connection-so-slow

Windows wireless and wired network connection problems

http://Windows.Microsoft.com/en-us/Windows/help/wired-and-wireless-network-connection-problems-in-Windows

Let us know if it helps!

Tags: Windows

Similar Questions

  • computer is slow when connecting to internet

    computer is slow when connecting to internet

    Hi Jerome,

    Until we provide troubleshooting steps, we would like to know as a result of information from you.

    (1) do you use Internet Explorer to access the Internet?

    (2) what Internet connection type you have? Is it wireless or wired?

    (3) don't you make changes to the Internet connection settings prior to this problem?

    Follow the steps in the link given below to solve the problem.

    Optimize Windows performance

    http://Windows.Microsoft.com/en-us/Windows/optimize-Windows-better-performance#optimize-Windows-better-performance=Windows-7

    Important: the data files that are infected must be cleaned only by removing the file completely, which means there is a risk of data loss.

    Write to us at the State of the question. We will help you to come.

  • When you try to convert a word document I get "an error occurred when connecting to the service. "Please try again later".

    When you try to convert a word document I get "an error occurred when connecting to the service. "Please try again later".

    Hello

    We apologize for the inconvenience. The site is under maintenance at the moment, the concern team strives to resume the services soon.

    Kind regards

    Christian

  • How can I get a full screen when connecting to the internet, my screen display 1/4 when it is connected to the internet. I then optimize it

    How do I get a full screen when I connect to the internet, my screen appears1/4 screen when I connected mthen should maximize it?

    Three options.

    1: take the corners of the window and drag it to the format full screen. Do not use to expand. Close all other windows first via the taskbar and the latter. Windows will remember the size of the last closed window the next time that you open the program.

    2: any shortcut you use to launch the window, right-click, and select Properties. Under the 'Run' drop-down list, choose "expanded".

    3: IE New Window Maximizer
    http://www.MajorGeeks.com/IE_New_Window_Maximizer_d1746.html

  • Satellite C660-1ME - sometimes more often hangs when connecting to internet

    Hi, my laptop is Satellite C660-1ME

    It blocks sometimes more often while connecting to the internet, and several times when I m working in eclipse IDE.

    The shot is so that everything is locked, same mouse doesn't have a movement and Ctrl + Alt + Delete does nothing and finally I have to hold the power button until it has adjusted or pull the power cable on.

    Everyone this experience or know where is the problem?

    Hello

    The description of your problem is too general and it is not easy to understand what exactly you do.
    Connection of internet statement is not easy to understand. Who knows what kind of connection use you page your visiting or whatever you usually do.

    Have you noticed this problem on the first day?
    Are you using the original OS that you got with your laptop?

    Where to start our discussion?

  • Indicator signal a1 Tablet WiFi stopped turning green when connected - good internet connection

    My WiFi signal strength indicator A1 Tablet has just stopped turning green when he has an internet connection and WiFi. I can't find any discussion on a problem like this. The problem appeared after that I did a boot into recovery (hold "volume" while turning on Tablet) to fix a touch screen calibration problem that had developed recently. I guess it is not essential to have the signal strength indicator works perfectly, but it would be nice. Someone at - it experience with this issue?

    If I am not mistaken, this means that your A1 is not synchronized with your Google account.

    Try logging in the game store. That could convince the A1 to connect.

    If the problem persists, you can remove the ' storage "(fait dans les paramètres > apps > tout);"» Calendar, Contacts, and electronic mail. Then restart and re-add your Google account. Who should start your A1 resynchronize.

    Note that everything you have added to the calendar, Contacts, or e-mail that was not synchronized will be gone. But all that has been synchronized with your Gmail account will return once the synchronization is complete.

  • Get an error "unable to locate component: this application has not start becauseATL100.DLL is not found" when connecting to internet

    * Original title: ATL100. DLL PROBLEM

    Please help me I am disabled and do not know much about computers. I just tried to connect to the Internet and there was a connection problem. The message came from mcagent.exe impossible to locate the component: this application has not start becauseATL100.DLL was not found. Reinstalling the application may fix this problem. I have no Internet and I don't know much about computers. I need my pc to take care of me, it's my connection to the world. Please help me. I also continues to receive a message from McAfee that my computer is in danger (real-time scanning is disabled)

    Delete all McAfee software! Then it will not work! Then reinstall the McAfee software. I had exactly the same problem: during the process of removement, I have immediate internet access... Good luck!

  • Laptop freezes when connected to internet via WiFi

    I use the laptop Dell inspiron 15r, with Windows 7 ultimate on it. Whenever I connect to the internet via WiFi, after a while, most of the programs I use freezes, and the internet connection is cut off. The same control panel functions do not occur. Also is not possible the normal closing, and I have to force close down at length by pressing the power button. This situation arises that if I use the WiFi. When I use a LAN cable, no problem. This situation is quite irritating, like many times I have no other choice than to use a wi - fi connection and whenever I use it after a few minutes, I have to restart with force, and the cycle repeats. Please suggest a solution. Thank you.

    Hello Brad,

    I tried the thing of diagnosis, but could not get anything out of it. The problem is now solved because I updated the drivers of network on the Dell site, but currently I am confronted with some problems, that I used to.

    Thank you much for the help.

    Kind regards

    Sunil.

  • I get 'over capacity' warning when connected to iTunes

    My iPhone has 13.5 GB available, but when I connect to iTunes I have a capacity of 18 GB message. How can I get rid of this short to do a clean restore?

    Thank you!

    Tell iTunes not auto-sync the device when you connect to iTunes. On a Mac, go to iTunes > Preferences > devices > prevent the automatic sync of iPods, iPhones and iPads.

  • Qosmio F50 - arrow signal when connected HDMI cable

    Hello

    I was able to connect my laptop to my LCD TV (LG LH4000) via HDMI, but all 3 ~ 5 seconds it seems to receive a signal of the up arrow.
    Let's say I'm reviewing some files in the windows Explorer and making the file, as if someone presses the arrow pointing upwards.

    This only happens when its connected via HDMI. As soon as I unplug the cable, he stops to do.

    I tried to look for similar problems, but no luck.

    Thanks for your help

    Hey Buddy,

    That s really strange, I must say...

    Did you test another monitor with HDMI connection?
    Have you tested another high quality HDMI cable?

    In addition, it would be interesting to know what operating system you have. Preinstalled operating system from Toshiba is installed?

  • TV projects "No Signal" when connected to Aspire V5 - 122P

    I tried to connect my Aspire V5 - 122P to my Sony Bravia, but it displays 'No Signal'. Since my aspires to only the mini-Display port I tried the following, but still, it does not work:

    1 port mini-Display - VGA/HDMI cable

    2 port mini-Display - HDMI cable

    I hope someone could help me.

    PS.

    I tried to connect my front Apire to a projector via the port Mini-affichage - VGA cable and it worked fine.

    I went to the Service yesterday and had the guys here help me understand what the problem is. We tried several HDMI cables and still we get "No Signal". I tried to replace the screen Mini HDMI adapter that I use and it worked. So the main problem is the adapter.

    So for all of you who have problems similar to this, I suggest that you try and test several cables/adapters first.

    IronFly thanks for all the suggestions and help that he gave.

    Detective Conan.

  • no signal when connecting my HP 2000-2d51SV via HDMI to my tv LG

    Hello

    I have connected my HP 2000-2d51SV laptop to my LG TV, but I get a reply that there is no signal.

    I tried Control Panel of the laptop, but I do not see the tv as additional monitor.

    On the TV, the HDMI port can be pressed (is not blury as other ports with no cable connected)

    I also tried the other TV HDMI ports

    I have windows 7 installed.

    Help, please!

    Thanks in advance

    Pantelis

    Hello, @pantelis73

    It seems that you have a problem with the connection of the laptop to a TV for use as an external monitor. I will try to help you with this.

    Connection to a TV or monitor to your Windows 7 PC using HDMI - try the steps outlined in this document. If you do not also try another cable.

    I would like to know how this happens.
    Thanks for posting on the HP Forums.

  • I get a black screen when connecting to my TV

    PC to TV resolution problem?

    I bought a pc specifically if I could play the star wars: the old Republic game on my TV. I have connected the pc to the tv using a vga to hdmi. As a first step, that it worked fine. Then tried to play the game and the screen went black. I tried to change the resolution on the pc and now the pc when run in normal mode will only show a black screen after startup. It will run in safe mode with screen works fine. I tried different resolution setting and none seem not to work. I tried to look online for answers and saw someone suggested an app called powerstrip, so I managed to download that but can't run it in safe mode to see if it will be useful. How can I fix this so I can use the pc and play the game without a black screen?

    I forgot the exact dimensions of my tv, but it's about 45 ".
    Resolution of 1080 RCA
    I can't change the resolution of the TV.
    The PC is a refurbished HP Pavilion Slimline
    4 GB memory
    1 TB harddrive
    Processor Intel Pentium G630 at 2.7 GHz
    Intel HD integrated graphics
    Windows 7

    I looked at the model number for the TV. Here is the link to the specification for it on the RCA Web site.  http://rca4tv.com/product/spec.asp?modelnum=46LA45RQ

    I don't see anywhere to change the rate of resolution or refresh in the menu tv. When I go the part 'photo' of the menu it shows that

    You wouldn't change it on the TV.  ;-)  You must set your output video is that the TV can display.

    I suggest first - go VGA VGA if possible.  Go by what you presented (with some hypothesis, I am about to say), you have a few VGA HDMI adapter... So you get out of your VGA computer and go to your HDMI TV?  Given that the TV has VGA - VGA to go.  If your computer has HDMI - you might as well go HDMI to HDMI, but best results will probably come out VGA to VGA input.

    Inexpensive and probably work best for what you need.

    Looking around, this computer can do the following computer resolutions:

    • 1280 x 1024 (SXGA)
    • 640 x 480 (VGA)
    • 800 x 600 (SVGA)

    Another thing - it probably will result in what you see.

  • My Acrobat XI freezes when connected to internet

    Hi all

    A week ago, my Acrobat XI started freezing when it suffice to read PDF files.  After that multiple charging & re - installs, I discovered that freezing only happens when I am connected to the internet.  If I disable my internet connection, I have no problem at all.

    What can I do to fix this?  I have used several versions of Acrobat for the past 14 years, and this is the first time that has happened.

    I appreciate any help that can be provided.

    -Alex

    Hi all

    I found my solution.  I remembered that I am registered in "Adobe Online Services".  That's the problem.  Once I signed out of it, my problem went away.  I have no idea what is wrong with this option, but it was true nearby causing Adobe to lose a customer long term.  I seriously doubt that they care little ole me, but it would have been for a stupid reason.

    -Alex

  • my digital TV show no signal when connected to the hdmi to my hplaptop port

    I plugged the hdmi to HDTV cable end and the other end to the hdmi port to my laptop HP in the off-mode, then I turned the laptop and the tv on and seledted in my TV HDMI input signal. After that a few seconds tv monitor displays the data recovery then it comed no signal .do I need to make changes in my hplaptop pls help to solve this problem. Thank you.

    Hi spkmd,

    Follow these methods.

    Method 1: Check with the manufacturer for the software update of the HDMI driver.

    How to manage devices in Windows XP

    http://support.Microsoft.com/kb/283658

    Method 2: There may be a combination of keys on the laptop to change to HDMI manually, usually a FN + F # combination. You'll need to refer to the documentation for the laptop to which key can control the HDMI. Also, check the manual that came with the TV.

    Method 3: You can also go into the display properties and change the default view for the HDMI. To check the display properties, follow these steps:

    (a) click Start, then Panel.

    (b) click appearance and themes, and then click display.

    (c) in the settings of the display properties dialog box tab, click the icon of the monitor that represents the monitor you want to designate as the primary monitor.

    (d) click to select the use this device as the primary monitor check box. Note that this check box is not available when you select the icon of the monitor that is currently set as your primary monitor.

    For more information, see the following link:

    How to configure and use multiple monitors in Windows XP

    http://support.Microsoft.com/kb/307873

Maybe you are looking for