Get a .wimp file to work on my mac

Similar Questions

• I can't get the MP4 files to work in Windows Live Movie Maker

  I can get to move on him, even able to play but they look screwed up & don't right cheek & ne same export right.

  I believe that the files are in the H.264 format & are the MP4 file type, is it possible to get the video to play right?

  One of my mp4 to play fair but none of the others.  I've heard of some places, it supports, some that it is not, perhaps, there is something to download or install or an update that will work?

  I can get to move on him, even able to play but they look screwed up & don't right cheek & ne same export right.

  I believe that the files are in the H.264 format & are the MP4 file type, is it possible to get the video to play right?

  One of my mp4 to play fair but none of the others.  I've heard of some places, it supports, some that it is not, perhaps, there is something to download or install or an update that will work?

  =====================================
  No guarantee, but it might be interesting to try to download
  and install one of the following codec packs:

  (FWIW... it is always preferable, if you create a system restore
  point before installing any software or updates)

  * Proceed at your own risk *.

  (1) K-Lite Codec Pack (full)
  http://www.filehippo.com/download_klite_codec_pack/

  (2) CCCP (combined Community Codec Pack)
  http://CCCP-project.NET/

  Info about CCCP
  http://www.CCCP-project.NET/wiki/index.php?title=Main_Page

  If this does not work... it might be interesting to try to convert the
  files in format before importing in .wmv .mov
  Movie Maker.

  The following freeware can convert:

  (FWIW... it's always a good idea to create a system)
  Restore point before installing software or updates)

  Format Factory
  http://www.pcfreetime.com/
  (FWIW... installation..., you can uncheck
  ('all' boxes on the last screen)

  First... after the download and installation of Format
  Factory... you can open the program and
  left click on the toolbar, the "Option" button and
  "Select an output folder to" / apply / OK.
  (this is where you find your files after they)
  are converted)

  Drag and drop your video clips on the main screen...

  Select "all to WMV" / OK...

  Click on... Beginning... in the toolbar...

  That should do it...

  Good luck...

  Volunteer - MS - MVP - Digital Media Experience J - Notice_This is not tech support_I'm volunteer - Solutions that work for me may not work for you - * proceed at your own risk *.

• I can't get a SWF file that works perfectly in browsers runs in the environment Business Catalyst

  My site contains 3 parts. First HTML page which, when opened, plays a video. The link below gives you that.

  http://wrysmilebooks. BusinessCatalyst.com (it takes a few seconds to go)

  When the video ends a SWF file times. The code below should show you what's supposed to happen.

  http://wrysmilebooks. businesscatalyst.com/SWFbutton.html

  The difficulty is that the SWF file will not automatically play from the website within the Business Catalyst. Everything works perfectly when I run the Web page in different browsers with Dreamweaver. Also, if I just double-click the file in the Web site where he is sitting on my computer... the resident browser picks it up and everything.

  I already exchanged a few e-mails with catalyst of enterprise support and the support of InDesign... (The SWF file has been created using InDesign)... .but we do not seem to be getting anywhere. I see by the way go... so... here I am.

  Thank you

  Michael McLaughlin

  Hello

  All references to start with a slash:

  Have you just put all the files in the root?

  URL('Lbrite_15.EOT?#iefix')

  If so ok, (ideally should be in folders for organizing) but all the files in British Colombia must begin with a slash (/) to say BC to read from the root folder.

  Secondly, you have this:

  {window.location = "file:///SWFButton.html"}

  This is defined as if it were running on your local computer, which is not the case on the web.

  If the html file is again in the roo the window.location would...

  "/ SWFButton.html".

• How to get RAW GH4 files to work natively in 4.4 Lightroom

  I want to know how I can deal with Panasonic Lumix GH4 RAW files in Lightroom 4.4 as I used to do with my GH3.  I have updated camera raw to 8.6 so I can use Photoshop CS6 to deal with them but I much prefer to do in Lightroom.   Any help would be appreciated!

  Best

  Tom

  LR 4 longer being updated for newer cameras once only LR 5 came out, so you are never able to work natively on GH4 LR 4 files.  You can switch to 5.6 LR (which has new minimum operating system requirements), or you can convert to DNG with the DNG Converter 8.6, that can be used with 4 LR.

• Unable to get process several files to work

  Recently installed Photoshop elements 12.0, but can't and the processing of multiple work files option.  It is grayed out in the menu files.  What Miss me?  Thank you!

  You must be in "Expert" mode (menu bar above). Yes, you can

• How does the file access work between Mac and VM

  Hi I am a new user to the Fusion of the VM. I have a new Mac, and I loaded Fusion of VM, some Serif desiging websites software and Vista. So, how to file access works between the Mac and the VM? All my files are on my hard drive to the Mac. I am ready to use the Serif software to make changes to my site, but how do I access files? Can they stay on the Mac and be shared - how do for them? Or transfer them to my hard drive to the VM?

  Thank you.

  Can connect the guest in an operating system file system Virtual Machine as if it was another physical Machine on the LAN once properly configured at the level of the BONE in both operating systems using industry Standard SBM/CIFS shares and has nothing to do with VMware Fusion provides in itself that the Virtual Machine has a virtual network adapter connected.  No matter if it is set to bridged, NAT. (default) or host-only because you can communicate between the host and the guest with any of them.

  The other option is to use VMware shared folders and or files in reverse.  While the second is a nice feature, it is problematic during the installation/uninstallation of some software in Windows Welcome and my need to be disabled mirrored folders for installs it / uninstalls and then reactivated.  To understand the issue take a look on note them it applies more so what is there in the if APPLIES to Microsoft KB Article below: article.  Take a look at you receive an "Error 1606" error message when you try to install or remove a program from Microsoft if the files in reverse are or have been activated and you get an Error 1606.

  In addition to the files shared VMware and or files in reverse, you can also drag and drop files between the host and the display of the Virtual Machine, for example from office to office.  Note: All of these VMware features require the VMware Tools installed in the supported host operating systems.

  Or of course, you can move the file system of the client files if you wish.

• I nned to know the procedure I use to get can Mac 2008 Desk top that will not start. I don't know how to connect two computers, my portable Mac Air 2013 on my desk, now I need to know how get the workstation files in order to appear on my mac air so I can

  Does anyone know how after I connect to my office 2008 Mac (which will not start.) to my computer laptop (2013 Mac Air). What are the steps that I need to know to get the Desktop files is displayed on my mac air so I can copy files to your laptop, especially my Itunes folder.

  Thanks Jerri

  If you can't get the iMac began and ongoing implementation, you will not be able to use the target disk Mode:

  https://support.Apple.com/en-us/HT201462

  Then the option is to take the iMac HARD drive, install it in an enclosed, and connect the HARD drive to the MBA via the USB port.  If the HARD drive is recognized, you can copy the data out of it.

  Ciao.

• How can I get all the files from the hard drive in the non-working Compaq Presario CQ62-411NR

  Ice tea seep keyboard laptop, and after drying it feeds on. If I try a hard reboot, it is stated that I would lose all the info in the memory and I can't afford to lose my mother pictures that are on the hard drive. Is it possible to get the hard drive to work in some other way so that I can get my photos and other files.

  You can remove the hard drive and put it in a USB Enclosure.Plug USB port, another machine, where you should be able to go through it and copy your photos off on the hard drive of the host computer.

  Example:

  http://www.TigerDirect.com/applications/SearchTools/item-details.asp?EdpNo=3743052 & catid = 2783

• When I try to open the games on my Windows 7 system, I get the executable file to the games error message has stopped working.

  When I try to open the games on my Windows 7 system, I get the executable file to the games error message has stopped working. I tried several times to load the games following the indications for help but the games is not accessible. My computer is a remanufactured unit that was on the lease are there steps I can take to solve problems?  Thank you

  Original title: frustrated in New York

  The problem seems to be the igdumd64.dll:

  Fault Module name: igdumd64.dll
  Fault Module Version: 8.15.10.1749
  Timestamp of Module error: 4a5bdf54

  The igdumd64.dll is a component of the Intel graphics driver and seems to be an older version then try to update the graphic driver Intel.

  You could try the manufacturer of the computer for an updated driver, or use the following utility for intel to check a generic version:

  http://www.Intel.com/p/en_US/support/detect

• Bridge 5.0.2.4 with camera RAW 8.4.0.199 ON a MAC 10.10.1. Try to update camera RAW 8.7 to get my canon 7dMK2 raw files to work. But the update I have the last update! Witch, I did not clearly. And my Photoshop have different camera RAW

  Bridge 5.0.2.4 with camera RAW 8.4.0.199 ON a MAC 10.10.1. Try to update camera RAW 8.7 to get my canon 7dMK2 raw files to work. But the update I have the last update! Witch, I did not clearly. And my Photoshop have different camera RAW plug-in. 8.4 the old and the new 8.7. But it does not work. Have removed and reinstalled several times. What is going on? Why can't update bridge to the last version 8.7 or read my raw files from the Canon 7dmk2?

  Try this:

  http://blogs.Adobe.com/Crawlspace/2011/03/keeping-Photoshop-up-to-date.html#NotConnected

• Get Photos 'from files and folders"does not work beyond the letter 'G '.

  I have PSE - 7 is installed in Windows 7 64 bit. The program seems to work fine except for this:

  I have a very important folder; (141 GB, 2 500 files, 207 000 files) The command 'Get Photos from files and folders' stops working in the middle of the letter 'G'...!

  I have the same folder in a machine running Win XP, and both PSE 5 and 7 PES do not exhibit this behavior. Can I import from any letter of the alphabet...! (LOL)

  The catalog associated with this installation file has been optimized and recovered.

  This folder is located on the "G: /" drive (volume).

  HARD drive "G /: ' has been fully formatted (not a quick format).

  The only exception may be the way things should have been done, is that the catalogue was opened under the drive letter and the serial number of the drive.

  Using the drive letter, this catalog open immediately. Any ideas...?

  I learned that from the PSE 6, PSE uses the serial number of the HARD disk and not the letter of the reader to access the content. However, a catalog will still open and register correctly, using only the letter of the drive from it's previous machine. (Note that this is the same behavior as earlier versions of PSE, such as PSE-5, which depended only on the drive letter).

  --> When we say that the ESP is not dependent on the drive letter to access its content, it doesn't mean that the PSE will display the serial number of the HARD disk in the application. In this case, you have changed the drive letter from E to F, PSE media will not suffer.

  I'm usually import a whole folder. Until the letter 'G', PSE - 7 works as expected. The photos appear in the organizer and are accessible in all directions. After the letter 'G', it is impossible to select any folder inside the dialog box «Get the folders of files and folders» When the element is highlighted, the letters blink and change for other mailings, then selection resets nothing selected. After 'G', I have to use the, command "Get pictures by the research. This works as expected. Once the pictures are inside the Organizer, everything is as it should be.

  --> This is a known issue. Simply select "All Files" in the "File Type" drop-down list present in the import dialog box. After that, it will work very well.

  Just to sum up PSE6 or PSE7 are not supported under Win7 so you could face some issues.

• Had to reinstall windows and reinstalled creative cloud, now I can use is no longer the encoder or Premiere Pro AVI files. I just get a corrupt file error, but all of my AVI files play very well, and they all worked until I reinstalled windows.

  I got creative cloud and all products works fine before I reinstalled windows.
  I reinstalled windows 7 and reinstalled my creative Cloud applications, but now I can import is no longer any of my AVI files, who worked all before. As the title says

  I managed to fix it, the original program that has saved the file AVI Fraps, which uses its own codec. Relocation of reinstalled Fraps codec.

• Portege R830: don't seem to be able to get the fingerprint reader to work

  HI - need help.

  I have a Toshiba R830 I got "downgrade" to Windows 7 32 bit version pre-installed 64-bit. Long story - but it's the software compatibility.

  Despite the download and the installation of what I think is all the relvant 32 drivers - I don't seem to be able to get the fingerprint reader to work.

  I downloaded and installed the software fp-sw-201103311304 Tosh - chilled out and tried to install it.

  It's actually hard to know if it is installed! I get a window telling me it will extract the file in a directory C:\temp and tells me at the same time that 'tinstallwb.exe' will start once the extraction is complete.

  It seems to extract - but I do not see that the installation is happening.

  Subsequently it is has that nothing listed in the title of the programs - and nothing "launches."

  In Device Manager - I can't see anything that is listed as "fingerprint reader" under security features - the list is TPM 1.2. Not actually sure that is nothing to do with the fingerprint reader - well I've enabled and then disabled via the BIOS.

  Am I missing something?
  Could the reader [which I have not used since the new - even if it's only 8 weeks] have stopped working?

  Would be very grateful for pointers.

  Try to start the installation manually. On the desktop create a folder unpack and after doing the beginning downloaded exe. Extract the files to the folder unpack and disable command run after extraction.

  When files are checked almost open and Toshiba archive extracted file extractor. You will find setup.exe.
  Try please to start it manually.

• Get incremental counter/sound to work along side with action with usb-6008 with labview tia sal22

  Get incremental counter/sound to work along the coast with usb-6008 with labview tia sal22

  Hi all

  I can get this vi to work if they are distinct from the vi but I can't join them together

  Example of my error:

  If buffers are set to 0 the freq counter increment works, but no sound
  If the buffers are set to 1 the audio works fine but is not increment the Freq counter
  If the buffers are attached to more 1 clicks and pops are coming

  That's what I'm doing:
  (1) have the frequency of increment of my internal sound card to a certain level as .01hz a second until he gets to 20 000 hz

  (2) use my device usb-6008 daq, which is connected to the same machine to measure the voltage at the same time. (I am in a position very low voltages between 1-5volts)

  (3) output to a worksheet text file which will show you:

  time in seconds, frequency, voltage
  0,400.01,2

  1,400.02,2.5

  2,400.03,1

  I'm a bit confused about how connect the increment and the audio during the measurements with the usb-6008 housing on the same machine
  at the same time and in the same VI.

  Anyone have any ideas?  I'm using labview 8.5
  TIA sal22

  Ha ha you have been deceived by a dynamic thread. Insert a convert from Dynamic Data Express VI (Palette to own: Signal handling screw Express) between the daq read and build the array function. Then it won't work. Now the value in the dynamic data is only converted to a numeric value

• I have a samsung galaxy s2 sprint phone and I just did an update for my phone. After doing so, I am unable to get my phone to register with my computer to get my music files off of it?

  I have a samsung galaxy s2 sprint phone and I just did an update for my phone. After doing so, I am unable to get my phone to register with my computer to get my music files off of it? How can I fix this problem? It worked absolutely fine before the update.

  Contact your cellular provider or Samsung with this problem.