Get a work wireless with the other computer
I can't get my wireless to work, said the connection card wireless network is disabled & local connection adapter is disabled...
I have a desktop computer & bought a wireless router for it! But can't make it work...
Hello
If desktop equipped with a wireless adapter to start first with her.
Check the Device Manager for the entry of valid card of the wire.
http://www.ezlan.NET/Win7/net_dm.jpg
If there is no valid entry, remove any entry from fake and re - install the drivers for the wireless card.
----------------------------------
Try installing the latest drivers from the card manufacturer support page.
Download the drivers and extract them to a folder of your choice.
In Device Manager, right-click on the adapter.
Click Update drivers and choose her browse my computer for drivers.
Choose let me a list of choices, click on disk and point to the folder with the drivers.
-------------------------------------
Check network connections to make sure that you have a Local Area Connection icon/entry, and that the properties of the icon (right-click on the icon) are correctly configured with the TCP/IPv4 protocol in the properties of network connections.
http://www.ezlan.NET/Win7/net_connection_tcp.jpg
Connect you to the menu of the router from a work computer and make sure DHCP is on, and it is configured to assign IPs which can cover the number of computers that are connected (a bit more will be even better).
Turn off the computer and the router, reset the router and the computer.
Right-click on the wireless network connection card, select status, details and see if she got an IP address and the rest of the settings.
On the State of intellectual property.
TCP/IP and its variables usually look like this.
Right-click on the wireless network connection card, select status, details and see if she got an IP address and the rest of the settings.
Typical TCP/IP status looks like this.
http://www.ezlan.NET/Win7/status-NIC.jpg
Description is the data of the card making.
Physical address is the MAC of the card number.
The xx must be a number between 0 and 255 (all xx even number).
YY should be between 0 and 255
ZZ should be between 0 and 255 (zz all the same number.)
The date of the lease must be valid at the present time.
* Note 1. IP that starts with 169.xxx.xxx.xxx isn't valid functional IP.
* Note 2 There could be an IPv6 entries too. However, they are not functional for Internet or LAN traffic. They are necessary for Win 7 homegroup special configuration.
------------------------
Also, make sure that the software firewall on each computer allows free local traffic. If you use 3rd party Firewall on, Vista/XP Firewall Native should be disabled, and the active firewall has adjusted to your network numbers IP on what is sometimes called the Zone of confidence (see part 3 firewall instructions
General example, http://www.ezlan.net/faq.html#trusted
Please note that some 3rd party software firewall continue to block aspects of the Local traffic even it they are off (off) . If possible, configure the firewall correctly or completely uninstall to allow a clean flow of local network traffic. If the 3rd party software is uninstalled, or disables, make sure Windows native firewall is active .
-----------------
When it works, you need to do something similar wit the wireless.
These steps and tell us where is the breaking point.
Check the Device Manager for the wireless card valid entry.
http://www.ezlan.NET/Win7/net_dm.jpg
If there is no valid entry, remove any entry from fake and re - install the drivers for the wireless card.
Check network connections to make sure that you have a network icon/entry wireless connection, and that the properties of the icon (right-click on the icon) are correctly configured with the TCP/IPv4 protocol in the properties of network connections.
http://www.ezlan.NET/Win7/net_connection_tcp.jpg
------------------
The wireless card drivers much also install utility wireless of the seller.
Make sure that if there are teas from Wireless Utility of seller does not work with the native Windows wireless utility (Service WLAN).
----------------
Make sure you firewall No. preventing / blocks wireless components to join the network.
Some 3rd party software firewall continue to block the same aspects it traffic Local, they are turned Off (disabled). If possible set up the firewall correctly, otherwise totally uninstall and get rid of its remaining processes that permit the own local network traffic flow.
If the 3rd party software is uninstalled, or disables, make sure Windows native firewall is active .
party like Hello and NetMagic 3rd network managers can block local traffic too.
---------------------------
Stack TCP/IP work should look like.
Right-click on the wireless network connection card, select status, details and see if she got an IP address and the rest of the settings.
http://www.ezlan.NET/Win7/status-NIC.jpg
Description is the data of the card making.
The physical address is MAC of the card number.
The xx must be a number between 0 and 255 (all xx even number).
YY should be between 0 and 255
ZZ should be between 0 and 255 (zz all the same number.)
The date of the lease must be valid at the present time.
* Note 1. IP that starts with 169.xxx.xxx.xxx isn't valid functional IP.
* Note 2. There could be an IPv6 entries too. However, they are not functional for Internet or LAN traffic. They are necessary for Win 7 homegroup special configuration.
---------------------------------------------------
A message in the small window that says connected wireless doesn't means that you are really a valid functional connection.
Above everything is OK, you must be able to connect to the router.
Connection to the router means that you can enter the IP of the router base in an address bar in one go, being able to connect and configure the router menus see.
If it doesn't connect to the router, journal newspaper from any computer that can connect to the router wirelessly with a wire, disable wireless security, make sure that the wireless SSID broadcast is enabled and try to connect with no. wireless security.
Enable security wireless after you eat to make a functional connection.
Jack - Microsoft MVP, Windows networking. WWW.EZLAN.NET
Tags: Windows
Similar Questions
-
my up to date iMac can't read installing lightroom 5 dvd I received for Christmas, the dvd player works fine with the other dvd, is it possible to download the program with the serial number of the dvd?
No need to worry about the disk version. He would just install an update anyway once it has been installed. Download from the link provided below and use the serial number, you need to activate.
-
my computer laptop wifi works with other modems. and my modem works with other laptops. they have one problem with each other.
I don't know why, please help me...Hello Omar.
Thank you for keeping us posted.
It seems that you did not try the method 2 and 3 after running the troubleshooter from network. Please, try it both ways and see if that solves the problem.
Reply with the results. We will be happy to help you.
-
HP Photosmart 7520 will not connect to my laptop but works perfectly on the other computer
I run window 8 on laptop, we have the HP Photosmart 7520 work wireless on our network with another computer on Windows 8, which has no problems today. We had this printer over a year and ussually works well.
The printer, laptop and office are on the same network
The laptop suddenly stopped working without modification
I stop and restart both the printer and the laptop - and disconnected and reconnected the network time
I used the HP troubleshooting of the printer, as this is not the first time that I had this problem
I spent hours looking for the printer and by entering the IP address
I've disabled the firewall and tried
HELP what am I missing
Hello @kingshometown , welcome to the forums
I read on how your mobile PC running Windows 8, is no longer connect to your Photosmart 7520 and does not. I have a suggestion for you that can help.
Please try the following steps: a display of the error "Unable to Find printer" for the HP Photosmart 7520 e - all - in - one printer series "
Best wishes let me know the result!
-
IPad on the same wireless network private Wi ' Fi as computer windows 10, Android phone and Samsung printer airprint. Blue tooth is disabled. Can I wireless print with Android mobile phone, but not with the IPad... suggestions.
Have you tried to reboot your router? Unplug it, count to 10, plug back in and let it boot and see if she sees the printer now. You might also want to disconnect/reconnect your printer, leave everything to make a new connection.
You can also force your iPad to restart. Hold down the button sleep and home for about 20 seconds. When you see the silver Apple, let go and let it restart.
-
IE computer and computer work at home
Yes, you can share files between computers using CC.
- Sharing files in Adobe Creative Cloud | Inspired by Adobe Magazine
- Adobe Creative Cloud - how to share files with Clients and colleagues. Adobe Creative cloud TV: Designers | Adobe TV
- https://helpx.Adobe.com/creative-cloud/how-to/assets-get-started.html
Concerning
Baudier
-
Cursor flashing at the start of the system and hard drive not working do not on the other computer
Original title: I need help with my Hardrive
Recently I had problems with a hard disk of computers. So I'm going to give guys the full story, I fell on this computer, it's actually my mums computer and it had a blue screen at startup error. I'm sorry, but I don't remember that the error was called on the top of my head, basiclly I quikly searched online and alll they say should use fixboot. So I did and the computer booted Windows XP very well. So the next day, when I was starting the machine (just to let you know, it would be the first start since I used fixboot, other than the right after that, I don't know if it would make a difference).
In any case, while trying to start, there was just a slider, or as underscore that retain just flashing in top left corner. I thought that maybe I should reinstall windows on another partition so my files would be safe. I did it, the installation program had no problem with it, but when I booted up I got the same line of flashing underscore / cursor in the upper left corner.
I thought that maybe I should back up the hard drive using my other computer so I tried to plug in the hardrive in my work computer and the hardrive started to heat up and as if it worked but any hardrive was getting into my computer, I refreshed it, started the computer upward once again, nothing.
So my question is what is the problem with this hardrive and how I save? I'm ready to do anything, use the live CD, using another computer. I have precious moments of family on the hardrive.
Thank you guys
Hi Joemost,
As you have important data on the hard drive. We recommend that you contact the vendor of hard drive to diagnose hard drive or visit the nearest tech store to save your data.
There are chances that the boot files are missing on the computer and also you could have not connected the hard drive as a slave when you connected to the other computer. Once you have saved the data, you can repair the existing windows and check if it starts successfully.
Try these steps to repair install Windows XP:
a. start the computer using the XP CD. You may need to change the boot order in the BIOS OF THE system for the CD starts before the hard drive.
b. on the "Welcome" screen, press ENTER to start the installation of Windows.
c. accept the license agreement and Windows will search for existing installations of Windows.
d. Select the XP installation you want to repair in the list, press R to start the repair.
e. the installation program copies the necessary files to the hard disk and restart. Do not press any key to boot from CD when the message appears. Setup will continue as if it were a clean install, but your applications and settings are preserved.
f. when the installation is complete, check if Windows starts correctly.Visit our Microsoft answers feedback Forum and let us know what you think.
-
In the United States, I can use selector locale quick to get us to the locale of Russia (ru - RU), but in Russia, it does not work to go the other way or any other premises than elsewhere. After you have selected the local new and restart firefox, it remains on the Russian locale. Y at - it a fix for this problem?
This has happened
Each time Firefox opened
== Looks like it started with a newer version of firefox, but this may have been coicidental
You have other language packs languages installed?
Tools > Modules > languagesThere is no module language en-US, to achieve that you must install the version of Firefox en-US and install other languages in the version.
http://releases.Mozilla.org/pub/mozilla.org/Firefox/releases/3.6.6/Win32/XPI/ -
How can I share 'My images' with the other user accounts on my computer?
How can I share 'My images' with the other user accounts on my computer?
where are the 'experts' on these forums adverstised? I can't get an answer to a simple question. Does anyone know how to do this?
Here we are, ok, I'm not an expert, but try this:
Right click on 'My images' > share > specific people... > select that you want to share this folder with.
...
After that, try to connect by using a different account. If you will not be able to open C:\Users\"FirstUser"\Pictures, you try to extend the network in the left pane of Windows Explorer > expand ComputerName > expand users > expand "FirstUser" > photos
-
Pencil of Apple works with the other iPads, or iPad pro?
Pencil DDoes Apple works with the other iPads, or iPad pro?
It works with the Pro
-
Original title: the headphone volume
How can I activate the volume for headphones? the speaker volume in the computer sound control mixer is up and works well with the speakers, but with the headdphones that I can barely hear
Hello1. who is the operating system installed on the computer?
2. What is the brand and model of headphones?
3A this works much earlier?
4. What is the brand and model of the sound card?5. have you ever tried to play the Audio using different media player applications and check?6. have you tried to connect the headset to another computer or phone and check if it works well?I suggest you follow these methods and check.Method 1: Run the audio troubleshooter.Open the Audio http://windows.microsoft.com/en-us/windows7/Open-the-Playing-Audio-troubleshooter playing convenience storeMethod 2: Set the earpiece/microphone as default device and check.a. right click on the volume icon in the system tray at the right corner on the desktop.b. Select the playback device, go to torecording tab.c. make a right click and headphone/microphone as the default device.d. click on apply and ok.If above steps fails, proceed to method 3.Method 3: I suggest to disable the improvements and check.a. right-click on the icon "speaker" at the bottom right of the screen.b. Select "playback devices".c. right-click on the helmet.d. Select Propertiese. click improvementsf. check Disable all improvementsg. click OKYou can read this article for more information:Tips for solving common audio problems
You can also contact the manufacturer of headphones and check.I hope this helps! -
I'm trying to install Adobe PS CS3 for my boss on another computer. I put the program on a hard disk and copied to the other computer now, it does not open and said he needs the license. What can I do to make it work on this computer?
Copy the program through a new machine will not work. Install it using installation files and activate using the serial number assigned to the license.
CS3 - http://helpx.adobe.com/creative-suite/kb/cs3-product-downloads.html
-
Until the latest update when the url I wanted in the address bar of AutoComplete has been selected, it "accompanies" no more further by clicking on. I must now click the refresh arrow. It won't work even with the return. How can I operate the old way easier?
You can disable this extension in tools > Modules > Extensions and close and restart Firefox normally.
-
Office jet 6500 HP has more: printer is not compatible with the new computer
Hello!
I recently bought a HP Pavilion desktop computer and connected to my all in one HP officejet 6500 a more printer. I tried to use the scan function and a message informing that no computer has been detected. I tried to install the CD however, a message appears indicating that the operating system on this computer was not supported. Message continued, "the software can be installed on computers running the following systems, Windows XP, Windows Vista or Windows 7" (my old computer that was connected to the printer work with Windows Vista). The message advised me to upgrade the operating system on this computer or install this software on any other computer system. I don't know what to do to get this printer compatible with my new computer. Is this possible? Help, please!
Hi there lavlock, RnRMusicMan is absent today. With 48 hours removed from this post, you are still in place and scanning? If so, I've always been a strong supporter of, 'if it ain't broke, don't fix it. "
-
My WD 1 TB passport is not recognized by my computer and the other computer. He will ask the same WD SES usb driver on the other computer. Please tell me how to solve this problem, because my important files are there. I already downloaded and installed WD smartware program but it still does not work.
Hello
The disk hard external does not get recognized in the other computer, there seems to be a problem with your hard drive.
You can try to change the USB cable that lets you connect the hard drive to the laptop and check if it is detected.
You can also see at the suggestion of this link.
If the problem persists, contact the WD Support.
Hope the above information is helpful.
Maybe you are looking for
-
E420s replace WiFi vs list of cards matching WiFi?
Hello I E420s (Type: 4401-2RG) with "1 x 1 11 b/g/n Wireless LAN PCI Express Half-Mini Card adapter. I would like to replace the adapter to one that works in GHz (at the same time or separately). I tried one of my other laptop but I get an error when
-
Cannot find field 'publication Date' in the music of file properties
Hi, I have a file with about 4000 music files (mp3) which currently displays a field 'year '. Some of the titles is not an entry and many of them have bad entered year, which isn't a problem, it means simply that each correcting entry. But when I rig
-
Graphics drivers for windows 7
my pc shows a message of graphics drivers crashing...!Please can someone help me. the message is in the given... pic!Please help me on the driver... !Details of the PC: -.Windows 7 32 bitchip type: Intel (r) 4 series express chipset familyadapter typ
-
Editing/Updating directly >; is it possible on windows LMS machine?
I have LMS 3.0.1 and I think that the most recent is 3.2? How I've upgrading or u update directly on the same server with minimum donwtime? It will affect the configuration, or is it possible to replace them with new versions? I know I modules CS, IP
-
Storm blackBerry Smartphones; loss of sound and microphone
Hi, I have a Storm 9500 on Vodafone (United Kingdom). Since November and have had some problems since then, auto turn off, restart, autonomy of the real shit. Improved with the software upgrade battery. However, now lost audio earphone and microphone