Get access denied logged as admin, trying to get to My Documents - Windows XP

Similar Questions

• massage "access denied" shown when I tried to use my hp pen drive 8 gp

  massage "access denied" shown when I tried to use my gp hp pen drive 8 in my computer dell laptop with xp. even in car work in all other PCs and all other works on my. but the problem with ony one. I also had format my drive but does not work!
  Yet one thing I noticed that when I insert my model of disk drive not listed as drive name instead of the name of the drive in a few seconds

  Hi Kim,

  If your using a hub powered between the deviec and the computer, you might try without the hub.

  You can also go to Device Manager, click the view tab and select Show hidden devices.

  Then, you can remove all instances of your USB drives and restart the PC.

  Try the USB drive again to see if the problem is resolved.

  Chris
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

• Silverlight has install "Access denied" even with Admin rights

  My stream of cable asked than to uninstall and reinstall silverlight. So I uninstalled and now whenever I try to extract the downloaded .exe file to silverlight, I get a prompt message 'Access denied'. I have administrator rights and can not extract when I "run as administrator". I recently installed McAfee VirusScan Enterprise, so I don't know if this is what's blocking me. I turn off the analysis of access on, and I still get "Access denied" - help?

  Hi hmbperson,

  ·         What version of the operating system is installed on the computer?

  ·         What is the full error message?

  Follow the steps in the article.

  How to solve problems when you install or uninstall programs on a Windows computer

  For reference:

  How to open a file if I get an access denied message?

  How to open an encrypted file if I am seen refuse access?

• Access denied message when you try to create a zip folder windows 7 Home premium

  I reinstalled windows yesterday and now get an access denied message when you try to create a zip file

  If you are still having the same problem with your zip files, please see the thread below for assistance.
  http://answers.Microsoft.com/en-us/Windows/Forum/Windows_7-files/issue-can-not-create-zip-folders-in-Windows-7-home/4eeba066-e741-4267-AA5D-910e4bf43b82

  Thank you!

• Access denied to the Admin for the seemingly random folders, folder modified permissions does not work

  I created a clean installation of Windows Pro 8.1

  There is only one user, who is also the administrator

  The tree of the default folders under My Documents (my music, my videos...) has apparently randomly locked access to 'user' / admin.

  For example, if I look under C:\Users\"the a user"\Documents, it opens fine.

  C:\Users\"the a user"\Documents\My Media, it opens fine.

  C:\Users\"the a user" \Documents\My photos and I get "you not currently have permission to access this folder.

  If I try to change by right-clicking the locked folder security settings, I see "a user", administrators and System have all allow for anything but special permissions.

  A user called everyone has only marked as Deny authorization.  Nothing else scored.

  The same goes for any folder that I'm locked.

  Any folder that I can access does not even own the Everyone user.

  I read a LOT of pages and articles on the web on change permissions.  None of them work because when I get to the point where I can try and change the permission to everyone, the option to do so is always locked.  Its as if for some records I'm seen as a non-admin, so no change is possible.

  For any folder that I can access, I can change and rearrange any permission I want.

  If I opened Control Panel under user accounts, there is not anyone listed, it's just the "a user."

  Any suggestions?

  Hello

  On my machine of a user C:\Users\"the" \Documents\My photos you mention would be a hidden folder...

  I think that there is a residual folder of XP, my images no longer located in My Documents...

  "My photos is now directly in the C:\Users\"the a user "folder that you used in your example...

  If you really want to have access to another, you can try just by removing the "everyone"

  Or... you can click on the options at the bottom of the permissions and actually change the ownership of the folder... I don't know if I would mess with that if.

• Trying to access the web site in the Favorites but I get the error saying: access denied.

  original title: access denied

  I am trying to remove a web site from a Favorites folder but I get access denied. If I try to click on the site told me to check the Internet shortcut property sheet. What gives? I tried everything I know.

  Hi MPSchaffels,
   
  Try to take possession of the file you want to delete, and then delete.
   
  For more information, see these articles:
   
  How to capture a file or a folder in Windows XP
   
  To take ownership of a file or folder

• "Access denied" error when trying to install KB2482017 - update for Internet Explorer

  Original title: KB2482017 - update of IE

  I tried to install this update, but I get "access denied". I also tried to install the KB using the file without failure, but the same error.

  Any ideas on what I might try next?

  Help us help you: start by reading this post 'sticky '...

  What information to post in the Windows Update forum
  http://social.answers.Microsoft.com/forums/en-us/vistawu/thread/1467f44b-ee27-4F7D-98d7-f1c4b35b3395

  ==============================================

  Visit the Microsoft Solution Center and antivirus security for resources and tools to keep your PC safe and healthy. If you have problems with the installation of the update itself, visit the Microsoft Update Support for resources and tools to keep your PC updated with the latest updates.

  ~ Robear Dyer (PA Bear) ~ MS MVP (that is to say, mail, security, Windows & Update Services) since 2002 ~ WARNING: MS MVPs represent or work for Microsoft

• Windows 7 - > security options due to all users, including the admin access denied

  Hello world...

  Recently, I have something in the folder system32 on the authorization and now nothing works. I activated the hidden directors and I still get access denied.
  1. I tried to go to control panel, I get "this operation has been cancelled due to restrictions in effect on this computer." dialog box.
  2. I tried to go in the resolution of the screen, I get "this operation has been cancelled due to restrictions in effect on this computer." dialog box.
  3. I can't install the program as it says I don't have permissions.
  After these dialog box, I get Explorer.Exe unspecified error.
  What should I do?
  I still live with this problem for a week and no response from anyone...

  Records can have only one owner.

  To regain control of your System32 folder, follow the instructions here:

  http://social.answers.Microsoft.com/forums/en-us/w7network/thread/24bdf172-2DBC-43b8-995d-a99b6a81413c/

• My computer says ACCESS DENIED when you try to put the values by defect of security + Itunes glitch thing? I need help?

  My computer is says ACCESS DENIED

  When I tried to do: http://support.microsoft.com/kb/313222/en-us

  This is the error I got! : (Sorry, really long).
  Monday, September 6, 2010 11:45:33
  -Configuration engine was initialized successfully.-

  -Model of reading Configuration information...

  -Rights of the user to configure...
  SeImpersonatePrivilege must be attributed to administrators. This setting is defined.
  SeImpersonatePrivilege must be assigned to the SERVICE. This setting is defined.
  Configure the S-1-5-19.
  Configure the S-1-5-20.
  Configure S-1-5-32-544.
  Configure S-1-5-32-551.
  Configure S-1-5-32-559.
  Configure S-1-5-32-545.
  Configure the S-1-1-0.
  Configure the S-1-5-6.
  Configure S-1-5-21-1141220282-763679081-1401190266-501.
  Configure S-1-5-32-555.

  User rights configuration was completed successfully.

  -Configure the group membership...
  Set up users.

  Group membership configuration was completed successfully.

  -Configure the 64-bit registry keys...
  Configure users\.default.
  Configure machine\software.
  Configure machine\software\classes.
  WARNING 5: Access is denied.
  Error security descriptor for machine\software\classes\.aa of construction.
  WARNING 5: Access is denied.
  Error security descriptor for machine\software\classes\.aax of construction.
  WARNING 5: Access is denied.
  Error security descriptor for machine\software\classes\ of construction. AMR.
  WARNING 5: Access is denied.
  Error security descriptor for machine\software\classes\.bwf of construction.
  WARNING 5: Access is denied.
  Error security descriptor for machine\software\classes\.cel of construction.
  achine\software\classes.
  WARNING 5: Access is denied.
  Error setting security on machine\software\classes.
  WARNING 5: Access is denied.
  Error setting security on machine\software\classes.
  WARNING 5: Access is denied.
  Error setting security on machine\software\classes.
  WARNING 5: Access is denied.
  Error setting security on machine\software\classes.
  WARNING 5: Access is denied.
  Error setting security on machine\software\classes.
  WARNING 5: Access is denied. (says this error ABOUT 1 000 times, I had to delete if it is not published on long!)
  Error setting security on machine\software\classes.
  WARNING 1336: Access control list (ACL) structure is not valid.
  Error setting security on machine\software\classes\Wow6432Node.

  Configuration of registry keys was completed by one or more errors.

  -Configure the 32-bit registry keys...
  Configure machine\software.
  WARNING 1336: Access control list (ACL) structure is not valid.
  Error setting security on machine\software\Licenses.

  Configuration of registry keys was completed by one or more errors.

  -Configure file security...
  Configure c:\program files\common files\speechengines\microsoft\tts.
  WARNING 2: The system cannot find the specified file.
  Error safe on c:\program files\common files\speechengines\microsoft\tts.
  Configure c:\programdata\microsoft\windows\drm.
  Configure c:\programdata\microsoft\windows\drm\cache.
  Configure c:\windows\repair\default.
  WARNING 3: The system does not have the specified path.
  Error setting security on c:\windows\repair\default.
  Configure c:\windows\repair\ntuser.dat.
  WARNING 3: The system does not have the specified path.
  Error setting security on c:\windows\repair\ntuser.dat.
  Configure c:\windows\repair\sam.
  WARNING 3: The system does not have the specified path.
  Error setting security on c:\windows\repair\sam.
  Configure c:\windows\repair\security.
  WARNING 3: The system does not have the specified path.
  Error setting security on c:\windows\repair\security.
  Configure c:\windows\repair\software.
  WARNING 3: The system does not have the specified path.
  Error setting security on c:\windows\repair\software.
  Configure c:\windows\repair\system.
  WARNING 3: The system does not have the specified path.
  Error setting security on c:\windows\repair\system.
  Configure c:\windows\system32\wbem\mof.
  Configure c:\windows\system32\windows media.
  WARNING 2: The system cannot find the specified file.
  Error on c:\windows\system32\windows media safe.
  Configure c:\windows\syswow64\export.
  WARNING 2: The system cannot find the specified file.
  Error setting security on c:\windows\syswow64\export.
  Configure c:\windows\syswow64\ias.
  Configure c:\windows\syswow64\wbem.

  File security configuration was completed successfully.

  -Set up the parameters of the General Service officer...
  Configure the sysmonlog.
  Error 1060: The specified service does not exist as an installed service.
  Error opening sysmonlog.
  Configure SamSs.
  Configure ntmssvc.
  Error 1060: The specified service does not exist as an installed service.
  Error opening ntmssvc.
  Configure netddedsdm.
  Error 1060: The specified service does not exist as an installed service.
  Error opening netddedsdm.
  Configure netdde.
  Error 1060: The specified service does not exist as an installed service.
  Error opening netdde.
  Configure dmserver.
  Error 1060: The specified service does not exist as an installed service.
  Error opening dmserver.
  Configure clipsrv.
  Error 1060: The specified service does not exist as an installed service.
  Error opening clipsrv.
  Configure the browser.

  Agent of General Service configuration was completed successfully.

  -Configure available attachment engines...

  Attachment engines configuration completed successfully.

  -Configure security policy...
  Configure password information.
  The administrator account is disabled.
  Guest account is disabled.

  Access configuration was completed successfully.
  Search anonymous LSA appoints setting: existing SD = D: (D; 0 X 800;) (A) (; xf1fff 0;) BA) (; 0 x 20801;) WD) (; 0 x 801;) (A) (a. 0x1000;) LS) (a. 0x1000;) NS) (a. 0x1000;) S-1-5-17).
  Configure the setting LSA anonymous search.
  Set up the nt\currentversion\setup\recoveryconsole\securitylevel machine.
  Set up the nt\currentversion\setup\recoveryconsole\setcommand machine.
  Set up the nt\currentversion\winlogon\cachedlogonscount machine.
  Set up the nt\currentversion\winlogon\forceunlocklogon machine.
  Set up the nt\currentversion\winlogon\passwordexpirywarning machine.
  Set up the nt\currentversion\winlogon\scremoveoption machine.
  Configure machine\software\microsoft\windows\currentversion\policies\system\dontdisplaylastusername.
  Configure machine\software\microsoft\windows\currentversion\policies\system\legalnoticecaption.
  Configure machine\software\microsoft\windows\currentversion\policies\system\legalnoticetext.
  Configure machine\software\microsoft\windows\currentversion\policies\system\scforceoption.
  Configure machine\software\microsoft\windows\currentversion\policies\system\shutdownwithoutlogon.
  Configure machine\software\microsoft\windows\currentversion\policies\system\undockwithoutlogon.
  Configure machine\software\policies\microsoft\windows\safer\codeidentifiers\authenticodeenabled.
  Configure machine\system\currentcontrolset\control\lsa\auditbaseobjects.
  Configure machine\system\currentcontrolset\control\lsa\crashonauditfail.
  Configure machine\system\currentcontrolset\control\lsa\disabledomaincreds.
  Configure machine\system\currentcontrolset\control\lsa\everyoneincludesanonymous.
  Configure machine\system\currentcontrolset\control\lsa\fipsalgorithmpolicy\enabled.
  Configure machine\system\currentcontrolset\control\lsa\forceguest.
  Configure machine\system\currentcontrolset\control\lsa\fullprivilegeauditing.
  Configure machine\system\currentcontrolset\control\lsa\limitblankpassworduse.
  Configure machine\system\currentcontrolset\control\lsa\lmcompatibilitylevel.
  Configure machine\system\currentcontrolset\control\lsa\msv1_0\ntlmminclientsec.
  Configure machine\system\currentcontrolset\control\lsa\msv1_0\ntlmminserversec.
  Configure machine\system\currentcontrolset\control\lsa\nolmhash.
  Configure machine\system\currentcontrolset\control\lsa\restrictanonymous.
  Configure machine\system\currentcontrolset\control\lsa\restrictanonymoussam.
  Configure machine\system\currentcontrolset\control\print\providers\lanman printing services\servers\addprinterdrivers.
  Configure machine\system\currentcontrolset\control\session manager\kernel\obcaseinsensitive.
  Configure machine\system\currentcontrolset\control\session manager\memory management\clearpagefileatshutdown.
  Configure machine\system\currentcontrolset\control\session manager\protectionmode.
  Configure machine\system\currentcontrolset\services\lanmanserver\parameters\autodisconnect.
  Configure machine\system\currentcontrolset\services\lanmanserver\parameters\enableforcedlogoff.
  Configure machine\system\currentcontrolset\services\lanmanserver\parameters\enablesecuritysignature.
  Configure machine\system\currentcontrolset\services\lanmanserver\parameters\nullsessionpipes.
  Configure machine\system\currentcontrolset\services\lanmanserver\parameters\requiresecuritysignature.
  Configure machine\system\currentcontrolset\services\lanmanserver\parameters\restrictnullsessaccess.
  Configure machine\system\currentcontrolset\services\lanmanworkstation\parameters\enableplaintextpassword.
  Configure machine\system\currentcontrolset\services\lanmanworkstation\parameters\enablesecuritysignature.
  Configure machine\system\currentcontrolset\services\lanmanworkstation\parameters\requiresecuritysignature.
  Configure machine\system\currentcontrolset\services\ldap\ldapclientintegrity.
  Configure machine\system\currentcontrolset\services\netlogon\parameters\disablepasswordchange.
  Configure machine\system\currentcontrolset\services\netlogon\parameters\maximumpasswordage.
  Configure machine\system\currentcontrolset\services\netlogon\parameters\requiresignorseal.
  Configure machine\system\currentcontrolset\services\netlogon\parameters\requirestrongkey.
  Configure machine\system\currentcontrolset\services\netlogon\parameters\sealsecurechannel.
  Configure machine\system\currentcontrolset\services\netlogon\parameters\signsecurechannel.

  Registry values configuration completed successfully.
  Configure the log settings.

  Configuration of the audit / log has been successfully completed.

  -Configure available attachment engines...

  Attachment engines configuration completed successfully.

  Engine - UN-initialize configuration...

  When I tried to solve this problem: http://social.answers.microsoft.com/Forums/en-US/vistasecurity/thread/9d71a399-d168-43ec-8083-673f5258d09c?ppud=4

  I can't back up my files anywhere that it says access denied :(
  

  Also, WHENEVER I open itunes windows must reconfigure and change all my default settings but my music is still there! It says itunes reconfiguration and it still load and say that is is to install itunes?

  I really need help please

  Hi mewlar101,

  You run the computer as an administrator?

  Step 1: Disable the security software; Follow the steps mentioned in the link below

  Disable antivirus software

  http://Windows.Microsoft.com/en-us/Windows-Vista/disable-antivirus-software

  Important: Activate security software once everything is done.

  Now, check if you can back up your files

  Step 2: Check with another profile for the Admin user

  If you do not have a different user account, you will need to create a (see link below). If everything works fine with a different user profile, you can infer that the user profile is damaged, click on the link to find out how to solve this problem.

  Create-a-user account

  http://Windows.Microsoft.com/en-us/Windows-Vista/create-a-user-account

  Difficulty of a corrupted user profile

  http://Windows.Microsoft.com/en-us/Windows-Vista/fix-a-corrupted-user-profile

  On your problem of ITunes, you can post your query on the discussion group by Apple for more specialized help

  http://discussions.Apple.com/category.jspa?categoryID=149

  Thank you, and in what concerns:

  Ajay K

  Microsoft Answers Support Engineer

  Visit our Microsoft answers feedback Forum and let us know what you think.

• File Sharing - access denied

  I have a small network (no domain server) with 3 desktop computers, all connected to the same switch:

  Computer #1) Windows 7 32 bit.
  Computer #2), Windows 7 64-bit.
  Computer #3) Windows 7 64-bit.
  I'm having problems trying to navigate between computers, readers:

  	Computer 1	Computer 2	Computer #3
  Computer #1:		Error: 8004005	Access denied
  Computer #2	Access OK		Access denied
  Computer #3	Access OK	Access OK

  Computers 1 & 2 get Access Denied errors when I enter the valid administrator ID/PW

  * I tried to turn off the Windows Firewall.
  * I allowed network discovery, file and printer sharing and the possibility of using accounts of users & passwords for you to connect to other computers in the 'Center of network & share '.
  * In each case there was an error "Access denied" when prompted, I used the id/password admin for the destination computer.
  * All 3 computers WAS part of a group of houses, but none are now part of a group home.
  Any ideas as to why I get 'Access denied' with the admin ID/PW?
  Thank you

  Take a look at this discussion.

• Failed to open the Add Printer window. access denied...

  Running a win7 HP Pavillion dv 6000.  Downloaded all the updates. the printer is on a wireless network.  I can print and scan and ping from cmd line and see the printer.  Yet he does not appear in devices and printers. And when I do try and add the printer, I get the window "can't open add printer." access denied. "  When I tried the cmd line, he wants to settle down on the network.  its already up and running on the network. The printer and scanner both appear in Device Manager, even if I have to open 'show hidden devices' to see, but they tell me the drivers are not installed, but they are.

  I am logged in as administrator. BTW I also just installed the same printer on a new computer win7 hp desktop and and it worked fine. I can also access it from another laptop running xp. all on the same network.

  Don't think that bothers me as well if it didn't work, but it does not work.  The machine just tell me its there!

  A big thank you to all those who might lend a hand.  And I don't know 'if it isn't broken don't fix.'

  Hi Worktel,

  • You have a third-party security software installed on the computer?

  Step 1, I suggest to access the link below and follow the steps in the article to run a Printing Troubleshooter.  http://Windows.Microsoft.com/en-us/Windows7/why-cant-I-print

  Step 2

  If the printer troubleshooter help you to solve the problem and you are unable to open add a printer, you can also try to temporarily disable the security software from the computer and try to verify if can install the printer and print. If gets detected and if you can print, you can contact the manufacturer of security software and check if you need to change the settings. Later, re-enable the security software.

  Step 3

  If the steps above do not help, you can try to create a new administrator account on your computer and check to see if you can install it.

  To create a new user account, follow these steps:

  a. open user accounts by clicking on the button start the picture of the Start button, clicking Control Panel, click user accounts and family safety (or by clicking on user accounts, if you are connected to a network domain), and then clicking user accounts.

  b. click on manage another account. Administrator permission. If you are prompted for an administrator password or a confirmation, type the password or provide confirmation.

  c. click on create a new account.

  d. type the name you want to assign to the user account, click a type of account administrator and then click on create an account.

  If it works fine in the new user account, you can access the link and follow the steps for the corrupt profile Fix:
  http://Windows.Microsoft.com/en-us/Windows7/fix-a-corrupted-user-profile

  Hope this helps and let us know the result.

  Thank you and best regards,

  Srinivas R

  Microsoft technical support.

  Visit our Microsoft answers feedback Forum and let us know what you think.

• Don't update the graphics drivers Vista 64 ('Access denied' / 80070005)

  This has been quite a problem persisting for a while now and I'm not about to set. I have two points of Dell (a desktop and a laptop), both using Vista 64 and nVidia Quadro graphics cards and both have same problem. Earlier, a driver update attempted to settle on Windows Update, but it failed, citing the 80070005 error. After the next restart, completely graphics card drivers did not work at all, forcing windows to return to the graphics compatibility mode. New attempts to update or reinstall the drivers of graphics cards were just as futile. I tried both Windows Update and a downloaded version of nVidia drivers but none worked (the more I get in the way of error messages, it is "Access denied"). I also tried to completely uninstall the drivers and by removing the device in Device Manager, but still no luck. At the end of the day, I did a system restore, but this is not ideal, because the recommended update reappeared in Windows Update again and I have to keep it from settling each time that manually.

  After fishing trawl the internet for advice, I tried all sorts but in vain. I tried to disable my Anti Virus, using subinacl (and others) to restore registry permissions, rename the softwaredistributions folder, run in administrator mode, check the permissions of the update service and checking the status of execution protection. Nothing helps, so any suggestions are appreciated.

  Hello

  Thank you for using the Microsoft Windows Vista Forums.

  Follow the instructions below that may help you resolve the issue.

  Method 1:

  Microsoft has released a new "Fix it" solution that should automatically solve your problems with Windows Update.  Just click on the link below and follow the instructions.

  How to reset the Windows Update components?

  http://support.Microsoft.com/kb/971058

  If this does not work, download and install the update to windows safe mode.

  Check whether the problem is resolved.

  Method 2:

  Try to download and install windows updates which fails to install manually.

  Download the update and install it in safe mode.

  Method 3:

  Follow the instructions in the link below to perform the clean boot procedure, which could help solve the problem of the Windows movie maker.

  Step 1: Perform a clean boot

  Step 2: Enable half the services

  Step 3: Determine whether the problem returns

  Step 4: Enable half of the startup items
  Step 5: Determine whether the problem returns

  Step 6: Resolve the problem

  Step 7: Reset the computer to start as usual

  How to troubleshoot a problem by performing a clean boot in Windows Vista

  http://support.Microsoft.com/kb/929135

  After checking the problem, turn the computer back to the Normal mode.

  Uninstall or update the program that is causing the problem.

  Check whether the problem is resolved.

  Method 4:

  In Windows Vista, the built-in Administrator account is disabled by default. In previous versions of Windows, an administrator account was created automatically during Out-of-Box-Experience (OOBE) with a blank password.

  An account administrator with a blank password is a security risk. To better protect the system, the built-in Administrator account is disabled by default in all new installations and upgrades of Windows Vista.

  HOW to: Enable the build-in the administrator account in Windows Vista

  http://support.Microsoft.com/kb/555910

  Try to update built in Administrator account.

  You can also contact nVidia to get help on the installation of the driver.

  Please post back and let us know if it helped to solve your problem.

  Kind regards

  KarthiK TP

• CMD "access denied" administrator, ect.

  Hello

  I'm trying to fix the bug of Billboard with Roller Coaster Tycoon 3, who I have to open the command prompt, and then type
  .. .CD "C:\Users\user\Documents."
  then
  rmdir "my images".
  However, whenever I enter rmdir "my pictures", he returns constantly with access is denied.
  I have run CMD as administrator (current user and the hidden administrator account), disabled UAC, tried to "user" allows to have 'Full control' and 'Edit' C drive (it allows me to do, this could be the problem? if yes, what is the solution?)
  I'm really starting to get angry with my computer now. No matter what I try it seems my computer just does not allow me to do this simple CMD (all this for a small bug on a game lol)
  If anyone can help me and solve my problem, I'd be extremely grateful.
  Thank you
  -Matt, 16

  Hello

  I suggest you read the following article and try the steps.

  Troubleshoot "access denied" when opening files or folders

  http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-access-denied-when-opening-files-or-folders

  Note: Applies to Windows 7

• Windows incoming/outgoing firewall rules works do not (access denied)

  When I'm going to define either an inbound or outbound rule in windows firewall 7 I get mutiple messages "access denied."  I am trying to allow files and printers, sharing presets but when I cliquerai on finish, I get access denied messages.  Please notify.

  Hello

  Thanks for posting the question on the Microsoft forums. According to the description, you cannot create a rule of incoming/outgoing traffic in Windows Firewall and get a "access denied" error. We will perform a few steps and try to solve the problem.

  You have a third-party antivirus installed on the computer program?

  This problem normally occurs when the firewall services do not work correctly. All the dependency service could be the cause of the issue.

  I suggest you perform the steps mentioned in the article:

  Some services do not start in Windows Vista and Windows 7

  http://support.Microsoft.com/kb/943996

  Important: This section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click the following windows Help article.

  Back up the registry
  http://Windows.Microsoft.com/en-us/Windows7/back-up-the-registry

  Hope this information helps. Please reply with the status so that we can help you.

• Access denied when you delete a file from a batch file

  I run a batch file to compress and then delete the original file.
  The file is with everyone full access, and therefore the file.
  I run the batch Administrator file (literally, right click and choose Run as administrator).
  The delete operation has always failed with the error: access denied.

  What Miss me?

  I use Windows 2008 Server R2 Standard Edition SP1.

  Hello

  Your question of Windows 7 is more complex than what is generally answered in the Microsoft Answers forums. It is better suited for the IT Pro TechNet public. Please post your question in the TechNet Windows 7 networking forum.

  http://social.technet.Microsoft.com/forums/en-us/w7itpronetworking/threads