Get access with ActiveX Data

Similar Questions

• Microsoft Access with ActiveX control problems

  I did a bit of research on this topic and have found several answers that are nearby, but do not address my real problem.

  I would use ActiveX control Microsoft Access, especially to create new database files without having to copy an empty file that I've stored somewhere I also can't stand it when I don't get something to work, so it's now something personal also.

  Anyway, when I run a simple VI to open the reference can be created, Access._Application, I get the error: "error 3005 occurred at the opening of the Automation: object specified is not can be created in Access.vi. I have tried many of the common responses to this problem, such as navigation for the library in ActiveX window and try to save it with regsvr32, but the file is msacc.olb, which cannot be registered with regsvr32.exe. I have attached the original VI and I tried on 3 different PCs, all with slightly different installs of Office, but with Access 2007. If anyone can help me understand this point, I would be very happy.

  Thank you

  Your vi made the same error on my machine.  Then, I removed the Access._Application reference, click right on the reference entry and chose to create a control.  Then I changed the Active-X class by accessing my version of reference computers ("Access._Application.12").  The same vi took place without error.

  The class is still shows as Access._Application, which indicates that there may be an incompatibility which is not visible.

  When and activeX node does not work when copied from any other machine, it is recommended to replace each node that is generating the error and reselect the properties and methods.

• Get - vm with location data center column

  How can I get info VM with data center location included in a column?

  I check $_Extensiondata.config and do not get it down there

  Try this:

  Get - VM $vm | Format-table name,

  @{Name = 'Center'; Expression = {$_.vmhost.parent.parentfolder.parent}; a = 'center'} - a

  Tested with a virtual machine in a host of 'group '. I think that this may change if the host is not in a Cluster.

  Hope this works

• Oracle encryption vs servers - dba access to unencrypted data encryption

  Hi guys,.
  I have an application that consists of about 20 java servers and batch programs connect to an instance of oracle 11g. Some of the columns in the database are enrypted. This is achieved via PvE (keys stored in HSM, you can configure the columns of database specified etc.).
  I'd use the encryption of the Oracle instead, but I understand there was a requirement of the customer that DBA could not simply get access to unencrypted data.
  
  Is there a way to circumvent this requirement?
  
  Rgds
  Peter

  Hello

  ... There was a requirement of the customer that DBA could not simply get access to unencrypted data.

  Is there a way to circumvent this requirement?

  I'm not sure I understand, as far as I know, in 11g, you have the option to encrypt the data (Transparent data encryption) to the level of the Table or Tablespace level as well.

  For this, Oracle uses a master encryption key. It is true that the master key is stored outside the database (for example, by using an Oracle Wallet) so that the responsibility of the security administrator can be separated from the database one administrator.

  So, later, depends on who has the safety requirement. Access to the master key is a key issue:

  "+ Security is improved because the portfolio password may be unknown to the database administrator, security administrator provide the password. + »

  You will have much more information on the link below:

  http://download.Oracle.com/docs/CD/E11882_01/network.112/e10746/asotrans.htm#g1011122

  Hope this helps.
  Best regards
  Jean Valentine

• the installation of itune + quick time I get a message that reads "no can access network location % data%\ app. »

  had 2 users on the computer with itunes on the desktop. main user itunes has stopped working, but the secondary users still worked. tried to update software with the latest version but get a message that reads "not access network location % data%\ app.

  This problem occurs because there is incorrect entries in the Shell folder of the user who is logged on to Microsoft Windows. When Windows Installer goes to the sale of Shell folder of the user who is logged on to the computer, Windows Installer cannot locate the correct entry. The solution is in http://support.microsoft.com/default.aspx/kb/886549.

  The steps to correct this problem involve editing the Windows registry.  Change the settings of the REGISTRY can cause serious problems that may prevent your computer from starting properly. Microsoft cannot guarantee that problems resulting from the REGISTRY settings configuration can be solved. Changes to these settings are at your own risk.  I suggest that you first back up your registry as follows: http://windows.microsoft.com/en-US/windows-vista/Back-up-the-registry way to create a point in http://www.howtogeek.com/howto/windows-vista/create-a-restore-point-for-windows-vistas-system-restore/ restoration system just to be on the safe side.

  Here are the steps to fix it.

  1. click on start, run, type regedit in the Open box, and then click OK.

  2. look for the following registry key:

  HKEY_CURRENT_USER\Software\Microsoft\Windows\CurrentVersion\Explorer\User Shell dossiers\

  3 remove the entries that show the path that is listed in the error message.

  886549 KB http://support.microsoft.com/default.aspx/kb/886549: Regedit open again. In the left pane, click User Shell Folders, point to new, click expandable string value, type the value name that you want to restore (AppData) and then press ENTER. Right click on this value, click change, type the value in the value data for the value name box, and then click OK. The value data must be: % USERPROFILE%\AppData\Roaming. Change it if necessary.

  Step 8 KB 886549 suggests that you also check the values in HKEY_LOCAL_MACHINE\Software\Microsoft\Windows\CurrentVersion\Explorer\User Shell Folders. However, by fixing my problem, I had not to change values in the registry key.  If this does not work without the full procedure, follow ALL the steps in the referenced article.

  I hope this helps.  If not, post back with the results of what you tried.  Rear post anyway so we will know what happened.

  Good luck!

  Lorien - MCSA/MCSE/network + / has + - if this post solves your problem, please click the 'Mark as answer' or 'Useful' button at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

• The results of F1-QUERY-how to restrict or to SQL with the role of access to the data?

  Hello
  
  With the help of CC & B 2.3.1.
  
  I'm configuration of a Zone of F1-OF-QUERY to get and display customer information as level account; the filter criteria will be Geo val SP.
  
  With our application, we use access to accounts and groups access to the data on users roles to restrict access to sensitive accounts, such as VIP.
  
  What keywords should I use in the SQL statement to limit the results only for group accounts to which access is included in the Dar of the user?
  
  Example: If the user has DAR 'STANDARD', it won't see accounts with group access 'VIP '.
  
  I tried unsucessfully: USER: USER ID,: USER_ID.
  
  Unsucessfull example:
  
  Select dar_cd, user_id, expire_dt
  of ci_dar_usr
  Where user_id =: USER_ID
  and expire_dt > =: F1
  
  Thks,
  
  Fabien

  Hi, Fabien,

  If you are looking to determine the current user in the box,
  the keyword to use is: USERID

  You can check the zone of F1 "F1-FAVSCR" for its use.

• Unable to get online with new router-"Local access".

  Original title: can't get online with new router.

  I'm having a lot of trouble to get online with my laptop.

  My roommate has recently got a new EE Brightbox. It works perfectly well with his laptop and mobile phone. Also works with my mobile phone. However, when I try to use my laptop it only gives me "Local access". I have no problem connecting to the router, but it just won't let me go online.

  Tried to disconnect/reconnect the connection Wireless on laptop from scratch with wired connection to router, router and router reset re-booting. None of them have worked.

  Any help would be great?

  Laptop works on Vista.

  Hi Rob,

  Thanks for the reply.

  Have you tried methods of resolution of the problems mentioned in the previous answer?

  Please update the State of the question, we are here for you help!

• Cannot get to_char on a date with NLS_LANGUAGE option to work

  I'm working on the development of an application that will be multilingual. I need to replace some text in a string with a date in the format DD month yyyy. In order for the month to be displayed in the language of the user, I have to do a to_char using NLS_LANGUAGE option, but I can't seem to make it work. No matter what language I use, I get the output in English.

  SQL> select to_char(SYSDATE,'dd Month yyyy','NLS_LANGUAGE=GERMAN') FROM dual;
   
  TO_CHAR(SYSDATE,'DDMONTHYYYY',
  --------------------------------------------
  11 March     2013
   
  SQL> select to_char(SYSDATE,'dd Month yyyy','NLS_LANGUAGE=FRENCH') FROM dual;
   
  TO_CHAR(SYSDATE,'DDMONTHYYYY',
  --------------------------------------------
  11 March     2013
   
  SQL> select to_char(SYSDATE,'dd Month yyyy','NLS_LANGUAGE=ITALIAN') FROM dual;
   
  TO_CHAR(SYSDATE,'DDMONTHYYYY',
  --------------------------------------------
  11 March     2013

  I must have the correct syntax because if I use a language no I get an error.

  SQL> select to_char(SYSDATE,'dd Month yyyy','NLS_LANGUAGE=XXX') FROM dual;
   
  select to_char(SYSDATE,'dd Month yyyy','NLS_LANGUAGE=XXX') FROM dual
   
  ORA-12702: invalid NLS parameter string used in SQL function

  How to make this work properly?

  Hello

  You must specify NLS_DATE_LANGUAGE.

  WITH     target_languages     AS
  (
       SELECT     'German' AS language     FROM dual  UNION ALL
       SELECT     'French'          FROM dual  UNION ALL
       SELECT     'Italian'          FROM dual
  )
  SELECT     language
  ,     TO_CHAR ( SYSDATE
            , 'FMDD Month YYYY'
            , 'NLS_DATE_LANGUAGE=' || language
            )      AS t_c
  FROM    target_languages
  ;
  

  Output:

  LANGUAG T_C
  ------- --------------------
  German  11 März 2013
  French  11 Mars 2013
  Italian 11 Marzo 2013
  

  Published by: Frank Kulash, 11 March 2013 16:28

• Get-view FileManager = vCenter only? How to interact with the data without her store?

  Hello

  I am trying to create a folder directly on a data store and copy a vmx file.  What I've read I need to use Get-file manager mode, but this seems to be only available on vCenter.

  Is there anyway to interact with the data using PowerCLI store when it connects directly to a box of ESX?

  Thanks for your help,

  KeV

  The shortcut notation

  Get-View FileManager
  

  is not available when connected to an ESX host.

  But you can get the object as follows

  Get-View (Get-View ServiceInstance).Content.FileManager
  

  ____________

  Blog: LucD notes

  Twitter: lucd22

• How to get to 'leave the event' script to run again when the form with the data file is reopened?

  I've created an Adobe Dynamic XML using LiveCycle Designer form with many fields / subforms that are 'visible' or the 'hidden' according to the selected options of different menu drop-down lists. Also, the form has been activated to save. Users can successfully fill out the form and save a copy with the data that has been entered.

  The problem I have is that when the recorded file is opened again in the 'hidden' fields / subforms that were previously made visible by selecting the appropriate options in the drop-down list NOT displayed now. However if you make the same selections from each of the drop-down list shows still hidden ONCE the fields / subforms are displayed, and do not contain data that has been entered.

  The problem seems to be that the script that determines whether a field / subform is 'hidden' or 'visible' is a

  "<event activity="output" name="event__exit">" "

  that is followed by

  If (this.rawValue is '0')- (i.e. the value of the drop-down list)

  sfCompanyDetails.presence = "visible";

  sfRecruitmentAgency.presence = 'hidden ';

  etc, etc.

  and, therefore, it is not executed again when the file is reopened.

  Can someone advise please how do I do this?

  Hello

  Check if you enabled the "auto" option to keep the script changes in the properties of the form.

• I use a wireless modem to get on the internet at Virgin Mobile Broadband2Go device. Is it possible for some to get access to my PC, when this device is active?

  I have these multiple .exe running on my registry? security of wireless modem?

  I have 2 questions:

  1. I use a wireless modem to get on the internet at Virgin Mobile Broadband2Go device. Is it possible for some to get access to my PC, when this device is active?

  2. I think that someone is due to ghosting my PC. On my registry, I have 2 of the following: iexplore.exe attributed to administrator. Then I have an explorer.exe attributed to administrator. I have 6 svchost.exe running 2 assigned the Local, 2 assigned to network service and 2 running service attributed to the system. Can anyone provide an answer why I have these multiples, exe running on my registry?

  Thank you very much

  GreenGiant

  Hello
   
  Yes, it is possible to gain access to your computer; but not without your permission. The firewall on the computer prevents any unauthorized entry. Refer to the following articles.
   
  What is a firewall?
  http://Windows.Microsoft.com/en-us/Windows7/what-is-a-firewall
   
  Windows Firewall
  http://Windows.Microsoft.com/en-us/Windows7/products/features/Windows-Firewall
   
  How will I know if a wireless network is secure?
  http://Windows.Microsoft.com/en-us/Windows7/how-do-I-know-if-a-wireless-network-is-secure
   
  When you say "Record" do you mean "Services" in the Windows Task Manager. Its common to have these processes or services to run in the background.

  'iexplore.exe' means 'Internet Explorer'.

  'explorer.exe' means 'Windows Explorer'.

   

  What is svchost.exe?

  http://Windows.Microsoft.com/en-us/Windows7/what-is-Svchost-exe

   

  You can scan your computer with MSE to check the virus or malware if it affects your performance.

   

  The Microsoft Security Scanner is a downloadable security tool for free which allows analysis at the application and helps remove viruses, spyware and other malware. It works with your current antivirus software.

  http://www.Microsoft.com/security/scanner/en-us/default.aspx

  Note: The Microsoft Safety Scanner ends 10 days after being downloaded. To restart a scan with the latest definitions of anti-malware, download and run the Microsoft Safety Scanner again.

  Note: The data files that are infected must be cleaned only by removing the file completely, which means that there is a risk of data loss.

   

  Hope this information is useful.

• XP Pro is getting clogged with updates - can I uninstall?

  I have a Dell Optiplex 170 L desktop running XP Pro SP3 - I am constantly warning that my hard disk memory is less than the threshold and it seems that the system is clogged with updates dating back to 2007.

  Can uninstall these - for example, those before SP3 install?

  I have a Dell Optiplex 170 L desktop running XP Pro SP3 - I am constantly warning that my hard disk memory is less than the threshold and it seems that the system is clogged with updates dating back to 2007.

  Can uninstall these - for example, those before SP3 install?

  XPI * not * get "clogged" with updates.  ;-)

  Windows XP with all kinds of updates (if you started with no Service Pack and worked your way through to SP3, one at a time and all post-SP3 updates including those in option, you would still be below 10 GB - probably under 5 GB) is low.  If there is a lack of space, chances are it is * your * data or your installed applications.  Not only it would be imprudent to uninstall the updates that you have properly installed - you would earn very little to do (in terms of space.)

  You want to clean (including updates)?

  Do a house cleaning and the dust of this hard drive:

  You can free up disk space (will also help get rid of the things that you do not use) through the following steps:

  Windows XP should take between 4.5 and 9 GB * with * an Office suite, editing Photo software, alternative Internet browser (s), various Internet plugins and a host of other things installed.

  If you are comfortable with the stability of your system, you can delete the uninstall of patches which has installed Windows XP...
  http://www3.TELUS.NET/dandemar/spack.htm
  (Especially of interest here - #4)
  (Variant: http://www.dougknox.com/xp/utils/xp_hotfix_backup.htm )

  You can run disk - integrated into Windows XP - cleanup to erase everything except your last restore point and yet more 'free '... files cleaning

  How to use disk cleanup
  http://support.Microsoft.com/kb/310312

  You can disable hibernation if it is enabled and you do not...

  When you Hibernate your computer, Windows saves the contents of the system memory in the hiberfil.sys file. As a result, the size of the hiberfil.sys file will always be equal to the amount of physical memory in your system. If you don't use the Hibernate feature and want to reclaim the space used by Windows for the hiberfil.sys file, perform the following steps:

  -Start the Control Panel Power Options applet (go to start, settings, Control Panel, and then click Power Options).
  -Select the Hibernate tab, uncheck "Activate the hibernation", and then click OK. Although you might think otherwise, selecting never under "Hibernate" option on the power management tab does not delete the hiberfil.sys file.
  -Windows remove the "Hibernate" option on the power management tab and delete the hiberfil.sys file.

  You can control the amount of space your system restore can use...

  1. Click Start, right click my computer and then click Properties.
  2. click on the System Restore tab.
  3. highlight one of your readers (or C: If you only) and click on the button "settings".
  4 change the percentage of disk space you want to allow... I suggest moving the slider until you have about 1 GB (1024 MB or close to that...)
  5. click on OK. Then click OK again.

  You can control the amount of space used may or may not temporary Internet files...

  Empty the temporary Internet files and reduce the size, that it stores a size between 64 MB and 128 MB...

  -Open a copy of Microsoft Internet Explorer.
  -Select TOOLS - Internet Options.
  -On the general tab in the section 'Temporary Internet files', follow these steps:
  -Click on 'Delete the Cookies' (click OK)
  -Click on "Settings" and change the "amount of disk space to use: ' something between 64 MB and 128 MB. (There may be many more now.)
  -Click OK.
  -Click on 'Delete files', then select "Delete all offline content" (the box), and then click OK. (If you had a LOT, it can take 2 to 10 minutes or more).
  -Once it's done, click OK, close Internet Explorer, open Internet Explorer.

  You can use an application that scans your system for the log files and temporary files and use it to get rid of those who:

  CCleaner (free!)
  http://www.CCleaner.com/
  (just disk cleanup - do not play with the part of the registry for the moment)

  Other ways to free up space...

  SequoiaView
  http://www.win.Tue.nl/SequoiaView/

  JDiskReport
  http://www.jgoodies.com/freeware/JDiskReport/index.html

  Those who can help you discover visually where all space is used. Then, you can determine what to do.

  After that - you want to check any physical errors and fix everything for efficient access"

  CHKDSK
  How to scan your disks for errors* will take time and a reboot.

  Defragment
  How to defragment your hard drives* will take time

  You want to go further?

  Search for malware:

  Download, install, execute, update and perform analyses complete system with the two following applications:

  • MalwareBytes (FREE)
  • SuperAntiSpyware (FREE)

  Remove anything they find. Reboot when necessary. (You can uninstall one or both when finished.)

  Search online with eSet Online Scanner.

  The less you have to run all the time, most things you want to run will perform:

  Use Autoruns to understand this all starts when your computer's / when you log in. Look for whatever it is you do not know usingGoogle (or ask here.) You can hopefully figure out if there are things from when your computer does (or connect) you don't not need and then configure them (through their own built-in mechanisms is the preferred method) so they do not - start using your resources without reason.

  You can download and use Process Explorer to see exactly what is taking your time processor/CPU and memory. This can help you to identify applications that you might want to consider alternatives for and get rid of all together.

  Cleaning the components of update on your Windows XP computer

  While probably not 100% necessary-, it is probably a good idea at this time to ensure that you continue to get the updates you need. This will help you ensure that your system update is ready to do it for you.

  Download and run the MSRT tool manually:
  http://www.Microsoft.com/security/malwareremove/default.mspx
  (Ignore the details and download the tool to download and save to your desktop, run it.)

  Reset.

  Download/install the latest program Windows installation (for your operating system):
  (Windows XP 32-bit: WindowsXP-KB942288-v3 - x 86 .exe )
  (Download and save it to your desktop, run it.)

  Reset.

  and...

  Download the latest version of Windows Update (x 86) agent here:
  http://go.Microsoft.com/fwlink/?LinkId=91237
  ... and save it to the root of your C:\ drive. After you register on theroot of the C:\ drive, follow these steps:

  Close all Internet Explorer Windows and other applications.

  AutoScan--> RUN and type:
  %SystemDrive%\windowsupdateagent30-x86.exe /WUFORCE
  --> Click OK.

  (If asked, select 'Run'). --> Click on NEXT--> select 'I agree' and click NEXT--> where he completed the installation, click "Finish"...

  Reset.

  Now reset your Windows with this FixIt components update (you * NOT * use the aggressive version):
  How to reset the Windows Update components?

  Reset.

  Now that your system is generally free of malicious software (assuming you have an AntiVirus application), you've cleaned the "additional applications" that could be running and picking up your precious memory and the processor, you have authorized out of valuable and makes disk space as there are no problems with the drive itself and your Windows Update components are updates and should work fine - it is only only one other thing youpouvez wish to make:

  Get and install the hardware device last drivers for your system hardware/system manufacturers support and/or download web site.

  If you want, come back and let us know a bit more information on your system - particularly the brand / model of the system, you have - and maybe someone here can guide you to the place s x of law to this end. This isn't 100% necessary - but I'd be willing to bet that you would gain some performance and features in making this part.

  If you do all that - probably your Windows XP machine will run better she never has.

• [Explanation necessary] Clears the listview data and fill it again with new data

  Hello

  I correctly filled a listview in c ++, data analysed and does interesting things with it. However, I am drunk stumbling, unable to find a way delete and repopulate my display of the list...

  Question 1:

   

  1. How can after I insert data in the list view, I clear the list data and run again the same method (init) who populated the list view with the data in the first place?

  Here are the docs that I referenced and I don't understand how to implement the methods in my code.

  QList - clear() method

  https://developer.BlackBerry.com/Cascades/reference/QList.html#clear

  Using the data access Code, example
                            data_access/using_data_source

  GroupDataModel - Clear()

  https://developer.BlackBerry.com/Cascades/reference/bb__cascades__groupdatamodel.html#clear

  CODE
  
  Here is my code - filling of the display of the list of C++ and display of data in a ListView.

  MyApp.cpp

  MyApp::MyApp(bb::cascades::Application *app)
  : QObject(app){
      // create scene document from main.qml asset
          // set parent to created document to ensure it exists for the whole application lifetime
          QmlDocument *qml = QmlDocument::create("asset:///main.qml").parent(this);
  
              AbstractPane *root = qml->createRootObject();
              qml->setContextProperty("yoyo",this);
              //grab references
              list_view = root->findChild("listView");
  
              // set created root object as a scene
              app->setScene(root);
  
              mNetworkAccessManager = new QNetworkAccessManager(this);
              bool result = connect(mNetworkAccessManager, SIGNAL(finished(QNetworkReply*)), this, SLOT(requestFinished(QNetworkReply*)));
  
               Q_ASSERT(result);
               Q_UNUSED(result);                 json = new QFile("data/file.json");
  }
  
  void MyApp::init(){
      QNetworkRequest request = QNetworkRequest();
       // i call some service here
       mNetworkAccessManager->get(request);
  }
  
  void MyApp::requestFinished(QNetworkReply *reply){
      qDebug() << reply->error();
      qDebug() << reply->errorString();
      if (reply->error() == QNetworkReply::NoError) {
          qDebug() << "No error";
  
                  QByteArray data = reply->readAll();
  
                  if (!json->open(QIODevice::ReadWrite)) {
                      qDebug() << "Failed to open file";
                      return;
                  }
                  json->write(data);
  
          bb::data::JsonDataAccess jda;
          QVariantMap results = jda.loadFromBuffer(data).toMap();
                  QVariantList lst = jda.loadFromBuffer(data).toList();
              GroupDataModel *m = new GroupDataModel();
                     m->insertList(lst);
                     m->setGrouping(ItemGrouping::None);
                     if(list_view) list_view->setDataModel(m);
  
      }else{
          showDialog("Boo",reply->errorString());
      }
  }
  

  MyApp.hpp

  // Tabbed pane project template
  #ifndef MyApp_HPP_
  #define MyApp_HPP_
  
  #include 
  #include 
  #include 
  #include 
  #include 
  #include 
  
  namespace bb {
  namespace cascades {
  class Application;
  }
  }
  namespace bb {
  namespace data {
  class Application;
  }
  }
  
  /*!
   * @brief Application pane object
   *
   *Use this object to create and init app UI, to create context objects, to register the new meta types etc.
   */
  class MyApp: public QObject {
  Q_OBJECT
  public:
      MyApp(bb::cascades::Application *app);
      virtual ~MyApp() {
      }
      Q_INVOKABLE
      void init();
  private slots:
      void requestFinished(QNetworkReply *reply);
  private:
      QNetworkAccessManager *mNetworkAccessManager;
      QNetworkRequest *request;
      QFile *json;
      bb::cascades::ListView *list_view;
  };
  
  #endif /* MyApp_HPP_ */
  

  hand. QML

  import bb.cascades 1.0
  
  Page{
  Container {
                          background: Color.White
                          ListView {
                              id: listView
                              preferredHeight: maxHeight
                              objectName: "listView"
                              listItemComponents: [
                                  ListItemComponent {
                                      type: "item"
                                      Container {
                                          Container {
                                              Label {
                                                  text: ListItemData.id
                                              }
                                          }
  
                                      }
                                  }
                              ]
                              onTriggered: {
                                  console.log("selected_index: " + indexPath)
                              }
                              horizontalAlignment: HorizontalAlignment.Center
                              verticalAlignment: VerticalAlignment.Center
                          }
  
  }
  }
  

  Question 2:

  How reference to the ListView object with the name "listView" in different parts of the MyApp.cpp file? Is there anything else I should add to the header file to make the accessible listView?

  Question 3:

  What happens when you call the clear() method? How the data model is affected? How the user interface is affected? What happens in memory?

  Question 4:

  How do you verify that the data in the list has been deleted so that you can go ahead and fills again with new data? What is the cheque that I perform?

  I would also like to know how you manage multiple views of lists and data sources in your applications. Best practices or ideas?

  Thank you
  

  I was able to clear the listview with the following code, if anyone is interested.

  listView.dataModel = null
  

  The dataModel must be set to "null".

• The locked but user can access with other users

  Hi all

  I blocked a user in oracle and trying to "Account is locked out" displaying messages of connection.

  But I am able user from other users query tables. How do I block it?

  For example:

  I had blocked a user User1. When I logged in a user named USER2 and when I call SELECT * FROM USER1. Table_name, displays the data.

  I need to block this question from other USERS.

  Help, please

  Thanks in advance...

  Account lockout does not prevent others to get access on user objects. The only change is that the user won't be able to connect more.

  To block others access to objects of this scheme can be done by defining the privileges of law for other users, or with the vault of the database by creating a Kingdom

  around this blocked scheme (DV requires an additional license).

• Lost access to local data store

  Hi people:

  I have ESXi 6.0 running on an Intel S2600CWTS motherboard using the LSI SAS controller onboard and six readers Samsung 850 Pro SSD in a RAID 5 configuration.  This server is about a month and a half, and it worked fine for the first month, but in the last few weeks I started to do in the case where journal messages saying that ESXi has lost access to the data store, then, most of the time, about 15 seconds later access is restored.   Several times it took more time, which one crashed the server.  On these long, the motherboard Intel event log showed that a player had failed and began a regeneration and once the motherboard has shown that two different drives had failed, and it took both offline originally ESXi crashing.  On it that I was able to bring the two records back online via the RAID bios and everything worked fine again.  I suspect that I have hard disk problems because these discs are new and because different readers have been reported as failed, and also because no data has been lost even if 2 drives went offline at the same time.   I guess I could have a bad controller LSI, or a cable has come loose somewhere, but I expect to happen if it is really the case of data loss.

  I also noticed that lost access messages tend to appear in the log at the moment I start a virtual machine.  At first I thought that it would be one thing to flow, thinking a VM departure did a lot of IO, but this happens immediately, before even the bios of the virtual screen machine disappears, so I don't think that the virtual machine is actually reading the disc again.  In addition, as a precaution, I started the migration of some virtual machines on the server to the old server I still had available, and there is no lost access messages in the event log while that was happening, while about 50 megabytes per second of i/o has reached the disk during transfers.  I put the last patch on ESXi in mid-May, about two weeks before this started, and I begin to suspect that the patch may have something to do with it, because it seems to me that if something is happening between ESXi and the disk controller making hang up or lose interruptions during a short period of time , and I wonder if it goes pretty long if material in the motherboard sensors interpret this as some sort of hardware and simply brand failure according to readers I / O was hooked as bad then.

  Unfortunately I'm out of town now so I wanted more I had to the remote server, lest I do not not get back to the top.  I moved a couple of the most critical virtual machines from the old server which I was remotely start and transfer to virtual machines.  I also noticed that this issue tended to occur more frequently when I got to the top of the VCenter Server apparatus that any other (sometimes to others, but has happened every time I tried to start the device VCenter).  So who was the first that I moved to the old server, but strangely enough there is no error logged when I transferred the files, so the issue is not that ESXi had trouble reading the VMs vmdk file when I started it.

  I also wanted to ask you if there are any vibs for the LSI Megaraid controller on motherboard S2600CWTS I could install that would allow me to access the RAID controller without having to pick up the server and do it from the BIOS configuration screens, similar to how you can access the controller RAID from Dell while ESXi is running via a vib add-on.  So far I have not found one.

  My intention when I go to the server is to run an integrity check against the RAID 5 array via the controller and then use the AIMÉ ESXi utility on the data store to see if something is wrong here.  If not, then I guess I'll rewritten can patch.

  Ideas or suggestions welcome.

  Success!  I finally understood what the problem was corrected.  The problem is the fact that although the last vib driver LSI has been installed, for some reason any it would not automatically replace the default ESXi pilot lsi_mr3.  I did not notice that even though the latest driver package vib properly installed LSI controller was still using the original driver.  This could be considered by a 'esxcfg-scsidev - a' command showed that even "vmhba1 lsi_mr3 link-n/a sas.5001e67ca647e000 (0000:0: 00.0) controller LSI MegaRAID SAS Fury."  The second field after the controller (vmhba1) is the current manager used.  The pilot, which was to be used was: "vmhba1 megaraid_sas link-n/a unknown.vmhba (0000:03:00.0) Avago (LSI / Symbios Logic) Invader MegaRAID SAS controller.

  To fix this I had to disable the lsi_mr3 driver so that ESXi is forced to use it.  The procedure to do is the following:

  (1) make sure you have the new EXSi driver you want to use already installed.  I assume that bad things would happen if you have disabled the only driver who could run your disk controller.  Use this command to view the drivers installed: "esxcli software vib list" and you should get something similar to the following:

  [root@intelserver:~] esxcli list of software of vib

  Name Version Date seller installation acceptance level

  -----------------------------  ------------------------------------  ------  ----------------  ------------

  MegaRAID SCSI-sas 6.608.11.00 - 1OEM.600.0.0.2494585 Avago VMwareCertified 2015-07-19

  LSI - mr3 6.606.10.00 - 1OEM.550.0.0.1391871 LSI VMwareCertified 2015-06-19

  mtip32xx-native 3.8.5 - 1vmw.600.0.0.2494585 VMWARE VMwareCertified 2015-04-28

  ATA-pata-amd 0.3.10 - 3vmw.600.0.0.2494585 VMware VMwareCertified-2015-04-28

  ATA-pata-atiixp 0.4.6 - 4vmw.600.0.0.2494585 VMware VMwareCertified-2015-04-28

  ATA-pata-cmd64x 0.2.5 - 3vmw.600.0.0.2494585 VMware VMwareCertified-2015-04-28

  ATA-pata-hpt3x2n 0.3.4 - 3vmw.600.0.0.2494585 VMware VMwareCertified-2015-04-28

  ATA-pata-pdc2027x 1, 0 - 3vmw.600.0.0.2494585 VMware VMwareCertified-2015-04-28

  ATA-pata-serverworks 0.4.3 - 3vmw.600.0.0.2494585 VMware VMwareCertified-2015-04-28

  ATA-pata-sil680 0.4.8 - 3vmw.600.0.0.2494585 VMware VMwareCertified-2015-04-28

  ATA-pata-via 0.3.3 - 2vmw.600.0.0.2494585 VMware VMwareCertified-2015-04-28

  block-cciss 3.6.14 - 10vmw.600.0.0.2494585 VMware VMwareCertified 2015-04-28

  CPU-microcode 6.0.0 - 0.0.2494585 VMware VMwareCertified-2015-04-28

  EHCI-ehci-hcd 1, 0 - 3vmw.600.0.0.2494585 VMware VMwareCertified-2015-04-28

  elxnet 10.2.309.6v - 1vmw.600.0.0.2494585 VMware VMwareCertified 2015-04-28

  Emulex-10.2.309.6v - 0.0.2494585 VMwareCertified-2015-04-28 VMware esx-elxnetcli

  ESX-based 6.0.0 - 0.11.2809209 VMware VMwareCertified 2015-07-21

  ESX-dvfilter-credits-fastpath 6.0.0 - 0.0.2494585 VMware VMwareCertified-2015-04-28

  ESX-tboot 6.0.0 - 0.0.2494585 VMware VMwareCertified-2015-04-28

  6.0.0 - 0.0.2494585 of xserver-ESX VMware VMwareCertified 2015 - 04 - 28

  IMA-qla4xxx 2.02.18 - 1vmw.600.0.0.2494585 VMware VMwareCertified-2015-04-28

  IPMI-ipmi-devintf 39, 1 - 4vmw.600.0.0.2494585 VMware VMwareCertified-2015-04-28

  IPMI-ipmi-paremeter 39, 1 - 4vmw.600.0.0.2494585 VMware VMwareCertified-2015-04-28

  IPMI-ipmi-TR-drv 39, 1 - 4vmw.600.0.0.2494585 VMware VMwareCertified-2015-04-28

  LPFC 10.2.309.8 - 2vmw.600.0.0.2494585 VMware VMwareCertified-2015-04-28

  LSI-msgpt3 06.255.12.00 - 7vmw.600.0.0.2494585 VMware VMwareCertified-2015-04-28

  LSU-hp-hpsa-plugin 1.0.0 - 1vmw.600.0.0.2494585 VMware VMwareCertified-2015-04-28

  LSU-lsi-lsi-mr3-plugin 1.0.0 - 2vmw.600.0.11.2809209 VMware VMwareCertified 2015-07-21

  LSU-lsi-lsi-msgpt3-plugin 1.0.0 - 1vmw.600.0.0.2494585 VMware VMwareCertified-2015-04-28

  LSU lsi megaraid sas plugin 1.0.0 - 2vmw.600.0.11.2809209 VMware VMwareCertified 2015-07-21

  LSU-lsi-mpt2sas-plugin 1.0.0 - 1vmw.600.0.0.2494585 VMware VMwareCertified-2015-04-28

  LSU-lsi-mptsas-plugin 1.0.0 - 1vmw.600.0.0.2494585 VMware VMwareCertified-2015-04-28

  Misc-cnic-register 1.78.75.v60.7 - 1vmw.600.0.0.2494585 VMware VMwareCertified 2015-04-28

  Misc-pilots 6.0.0 - 0.11.2809209 VMware VMwareCertified 2015-07-21

  NET-bnx2 2.2.4f.v60.10 - 1vmw.600.0.0.2494585 VMware VMwareCertified-2015-04-28

  NET-bnx2x 1.78.80.v60.12 - 1vmw.600.0.0.2494585 VMware VMwareCertified-2015-04-28

  NET-cnic 1.78.76.v60.13 - 2vmw.600.0.0.2494585 VMware VMwareCertified-2015-04-28

  NET-e1000 8.0.3.1 - 5vmw.600.0.0.2494585 VMware VMwareCertified-2015-04-28

  NET-e1000e 2.5.4 - 6vmw.600.0.0.2494585 VMware VMwareCertified-2015-04-28

  NET-enic 2.1.2.38 - 2vmw.600.0.0.2494585 VMware VMwareCertified-2015-04-28

  NET-forcedeth 0, 61 - 2vmw.600.0.0.2494585 VMware VMwareCertified-2015-04-28

  NET-igb 5.0.5.1.1 - 5vmw.600.0.0.2494585 VMware VMwareCertified 2015-04-28

  NET-IGB 3.7.13.7.14iov - 20vmw.600.0.0.2494585 VMware VMwareCertified-2015-04-28

  NET-mlx4-core 1.9.7.0 - 1vmw.600.0.0.2494585 VMware VMwareCertified-2015-04-28

  NET-mlx4-en 1.9.7.0 - 1vmw.600.0.0.2494585 VMware VMwareCertified-2015-04-28

  NET-nx-nic 5.0.621 - 5vmw.600.0.0.2494585 VMware VMwareCertified-2015-04-28

  NET-tg3 3.131d.v60.4 - 1vmw.600.0.0.2494585 VMware VMwareCertified-2015-04-28

  NET-vmxnet3 1.1.3.0 - 3vmw.600.0.0.2494585 VMware VMwareCertified-2015-04-28

  nmlx4-core 3.0.0.0 - 1vmw.600.0.0.2494585 VMware VMwareCertified 2015-04-28

  nmlx4-en 3.0.0.0 - 1vmw.600.0.0.2494585 VMware VMwareCertified 2015-04-28

  nmlx4-rdma 3.0.0.0 - 1vmw.600.0.0.2494585 VMware VMwareCertified 2015-04-28

  nVMe 1.0e.0.35 - 1vmw.600.0.0.2494585 VMware VMwareCertified 2015-04-28

  OHCI-usb-ohci 1, 0 - 3vmw.600.0.0.2494585 VMware VMwareCertified-2015-04-28

  qlnativefc 2.0.12.0 - 5vmw.600.0.0.2494585 VMware VMwareCertified 2015-04-28

  REST 2.0.2.0088 - 4vmw.600.0.0.2494585 VMware VMwareCertified-2015-04-28

  Ahci SATA 3, 0 - 21vmw.600.0.11.2809209 VMware VMwareCertified 2015-07-21

  ATA-SATA-piix 2: 12 - 10vmw.600.0.0.2494585 VMware VMwareCertified 2015-04-28

  NV-sata-SATA 3, 5 - 4vmw.600.0.0.2494585 VMware VMwareCertified 2015-04-28

  SATA-sata-promise 2: 12 - 3vmw.600.0.0.2494585 VMware VMwareCertified-2015-04-28

  SATA-sata-sil24 1, 1 - 1vmw.600.0.0.2494585 VMware VMwareCertified-2015-04-28

  SATA-sata-sil 2, 3 - 4vmw.600.0.0.2494585 VMware VMwareCertified-2015-04-28

  SATA-sata-svw 2, 3 - 3vmw.600.0.0.2494585 VMware VMwareCertified-2015-04-28

  SCSI-aacraid 1.1.5.1 - 9vmw.600.0.0.2494585 VMware VMwareCertified-2015-04-28

  SCSI-adp94xx 1.0.8.12 - 6vmw.600.0.0.2494585 VMware VMwareCertified-2015-04-28

  SCSI-3, 1 - aic79xx 5vmw.600.0.0.2494585 VMware VMwareCertified-2015-04-28

  SCSI-bnx2fc 1.78.78.v60.8 - 1vmw.600.0.0.2494585 VMware VMwareCertified-2015-04-28

  SCSI-bnx2i 2.78.76.v60.8 - 1vmw.600.0.11.2809209 VMware VMwareCertified 2015-07-21

  SCSI-DNI 1.5.0.45 - 3vmw.600.0.0.2494585 VMware VMwareCertified-2015-04-28

  SCSI-hpsa 6.0.0.44 - 4vmw.600.0.0.2494585 VMware VMwareCertified-2015-04-28

  SCSI-ips 7.12.05 - 4vmw.600.0.0.2494585 VMware VMwareCertified-2015-04-28

  SCSI-megaraid-mbox 2.20.5.1 - 6vmw.600.0.0.2494585 VMware VMwareCertified-2015-04-28

  SCSI-megaraid2 2.00.4 - 9vmw.600.0.0.2494585 VMware VMwareCertified-2015-04-28

  SCSI-mpt2sas 19.00.00.00 - 1vmw.600.0.0.2494585 VMware VMwareCertified-2015-04-28

  SCSI-mptsas 4.23.01.00 - 9vmw.600.0.0.2494585 VMware VMwareCertified-2015-04-28

  SCSI-mptspi 4.23.01.00 - 9vmw.600.0.0.2494585 VMware VMwareCertified-2015-04-28

  SCSI-qla4xxx 5.01.03.2 - 7vmw.600.0.0.2494585 VMware VMwareCertified-2015-04-28

  UHCI-usb-uhci 1, 0 - 3vmw.600.0.0.2494585 VMware VMwareCertified-2015-04-28

  VMware-esx-dvfilter-maclearn-1, 00 1.00 VMware VMwareCertified 2015-05-12

  xHCI-xhci 1, 0 - 2vmw.600.0.0.2494585 VMware VMwareCertified 2015-04-28

  Tools-light 6.0.0 - 0.11.2809209 VMware VMwareCertified 2015-07-21

  [root@intelserver:~

  Verify that the scsi-megaraid-sas driver is installed before proceeding.

  (2) to disable the lsi_mr3 driver do the following: "esxcli set of module system - enabled = false - module = lsi_mr3 '

  (3) reboot

  After restarting, do: "esxcfg-scsidev - a" to check megaraid_sas driver is assigned to your disk controller.

  I don't know how ESXi decided to prioritize if two or more drivers are applicable to a single hardware device, or if the installation of the new driver LSI process is supposed to disable or remove default lsi_mr3 driver and simply failed to do so.  Also, I don't know what's going to happen when I put on the next patch of ESXi, specially if the lsi_mr3 driver will be once more the priority.  If anyone knows how the driver installation process is supposed to work in this situation, please let me know.  I am so happy that I finally got this problem because the server has been seriously covered with the data store become unaccessable for 5 to 10 seconds every time a VM started or stopped, and the former driver at least once done something bad enough to deceive the controller into thinking that one of the disks has went wrong and began a RAID Resync.