get adobe internal error after loading Vista service pack 2

Similar Questions

• How can I load Vista Service Pack 2? I get the same error messages when I try to download it from the Microsoft support site

  I have a Dell computer with a 32-bit version Vista Ultimate factory loaded. Service Pack 1 is loaded.  I tried to load Vista Service Pack 2 several times by using the following procedure and it does not load.
  -From Microsoft technical support I click Download (using a cable modem) and click on the file to run.   The file MB 475 downloads in about 5 minutes.
  -Click on install Vista Service Pack 2 and it starts to install
  -After about 10 minutes, a message appears "installation was not successful 800F081F error Code.  A system error not install the service pack.  Please download and run the tool to "Check for System Update Readiness". »
  -J' I download system analysis tool and start the installation.
  -Get a message "Installation update for Windows (KB947821) update 1 of 1"
  -After a long time, a message appears saying that the Installation has failed with an error Code 800706BE.

  I repeated this process several times and always get the same result.
  My McAfee security software and spyware blocker is disabled during this process

  The update is not installed successfully, you receive a message, and the computer restarts when you try to install an update in Windows Vista
  http://support.Microsoft.com/kb/949358

  See also the post of 'Response' in this discussion partners: http://social.answers.microsoft.com/Forums/en-US/vistainstall/thread/ad5159b6-edc7-4c45-842a-c8197aec3e07

  ========================

  Free unlimited installation and compatibility support is available for Windows Vista, but only for Service Pack 2 (SP2). This support for Windows Vista Service Pack 2 (SP2) is valid until November 26, 2009. Availability of support chat or messaging differs depending on your location. Go to http://support.microsoft.com/oas/default.aspx?prid=13014&gprid=582034 & select appropriate category (i.e., download problem;) Installation problem; Problems after installing a service pack). ~ Robear Dyer (PA Bear) ~ MS MVP (that is to say, mail, security, Windows & Update Services) since 2002 ~ WARNING: MS MVPs represent or work for Microsoft

• Update error 80070026 for Vista service pack 2

  Original title: Update error 80070026 for service pack 2

  I have error 80070026 when I try to upgrade to service pack 1 to service pack 2 in the automatic update feature. I am able to download any other updates in the automatic update. I disabled the firewall and still no luck. Does anyone else have this problem?

  0 X 80070026 = ERROR_HANDLE_EOF
  At the end of the file.

  Downloads and updates are corrupted or incomplete

  You can manually download SP2 if necessary - see:
  How to get the latest Vista Service Pack
  http://support.Microsoft.com/kb/935791

  If this does not work, see: http://social.answers.microsoft.com/Forums/en-US/vistawu/thread/ef5f48d5-ef20-48e3-bf03-09eeb9acebb1 - well not specifically for SP2, but addresses the error in question. Some things you can try if a manually installing SP2 does not work.

  Harold Horne / TaurArian [MVP] 2005-2011. The information has been provided * being * with no guarantee or warranty.

• error imstaling windows vista service pack 2 (kb948465)

  I get an error editing Windows windows vista service pack 2 (kb948465). I already deleted the cookies and the trash is empty. What other shoulod I try?

  Hello

  It took the exact error message to help you properly.

  This is the information I give normally when posters have problems with the installation of Service Packs.

  Click Start > right click on computer > left click on properties > see if you have Vista 32 bit or Vista 64-bit installed.

  It will also tell you which SP you have installed.

  Then, choose the download of 'bit' OK to use to install Service Packs, installation of SP1 first if it is not already installed.

  Vista SP1 32-bit (x 86): http://www.microsoft.com/en-us/download/details.aspx?id=30

  Vista SP1 64-bit: http://www.microsoft.com/en-us/download/details.aspx?id=21299

  Vista SP2 32-bit (x 86): http://www.microsoft.com/en-us/download/details.aspx?id=16468

  Vista SP2 64-bit: http://www.microsoft.com/en-us/download/details.aspx?id=17669

  This Information Microsoft can help you resolve problems that you encounter during the installation of Service Packs for Vista.

  http://support.Microsoft.com/kb/947366

  See you soon.

• No audio device installed after windows vista service pack 1 update!

  After you install windows vista service pack 1 I have no sound on my laptop.what do? I have a message that no audio device has been installed.

  Hello

  You can follow below link that can help you to solve your problem:

  How to resolve problems that you experience after you install a Service Pack in Windows Vista.
  http://support.Microsoft.com/kb/948481

• Errors after installation of Service Pack 2 - 0xc0190002 xmllite.dll, crcdisk.sys and start-up config is corrupt error: 0 x 490

  original title: 0xc0190002 and config xmllite.dll and crcdisk.sys and boot is corrutp resutl error: 0 x 490 different codes and errors that I wrote down.

  I have a Dell Inspiron 1525.  It seems after I have updated to Vista with Service Pack 2 (I think) I think I destroyed my computer.  I can't use it.  I get a different error, '0xc0190002' and 'xmllite.dll' and "crcdisk.sys" and "Root Cause found: confi Boot is corrupted, repair action: repair of table of Partition follows: failed: error code 0 x 490" I used the disk I got from Dell for operating system, did a system repair, tried everything I could think of, but I'm not an expert.  Good by following the steps.  Have you tried a few things that have been listed here, thought he was fine, then I reboot and it turns a whole list of commands, and then stops at 1324/90509 or stops at crcdisk.sys...?  Can someone help me?

  https://support.Microsoft.com/OAS/default.aspx?PRID=13014&Gprid=582034&St=1

  Free unlimited installation and compatibility support is available for Windows Vista, but only for Service Pack 2 (SP2). This support for SP2 is valid until August 30, 2010.

  Microsoft free support for Vista SP2 at the link above.

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

  Dell recovery options:

  http://supportapj.Dell.com/support/topics/global.aspx/support/DSN/en/document?journalid=67E9C215C4BABD6CE040AE0AB5E14F05&docid=339949

  Above is Dell to reinstall Vista from the DVD on your computer.

  http://supportapj.Dell.com/support/topics/global.aspx/support/DSN/en/document?journalid=67E9C215C4BABD6CE040AE0AB5E14F05&docid=336966

  And that way if you have a recovery partition on your hard drive.

  See you soon

  Mick Murphy - Microsoft partner

• 0xc0000033 error when installing Vista Service Pack 1

  I have a Tablet HP that I install Vista SP1, but instead I immediately get an error 0xc0000033. (The application could not initialize properly (0xc0000033). A message appears saying that MS Installer has stopped working the event name APPCRASH problem. I tried to turn off the system update service, delete the C:\Windows\SoftwareDistribution and restarted the service, but I get the same error. Any ideas?

  Have you tried this link

  http://answers.Microsoft.com/en-us/Windows/Forum/windows_xp-system/error-code-0xc0000033/20cd6678-A916-45CD-A038-433ed185ae21

  Run SFC

  http://support.Microsoft.com/kb/929833

  Bravo to fly high!

• Cannot install the update KB955839 - error code: 80070490 & vista Service Pack 2

  I have vista ultimate and have been unable to install KB955839 for quite awhile now, I can install each update except KB955839.
  Without KB955839 installed, I don't not offered Servicepack 2, as an update in windows update, however when I hide it I'm offered servicepack 2 as an update.
  Installation fails every time however.
  I tried the two installation manual and windows install update for updates without success.
  Update Service Pack 2 appears to be related KB955839 install successful
  I tried most of the patches in this forum

  Are you download and SAVE and then go and RIGHT CLICK RUN AS ADMIN? Triple
  Make sure you download the correct version.

  Describe what is happening? Error messages or?

  Try the fix here:

  http://www.Winhelponline.com/blog/Vista-the-Windows-Installer-service-could-not-be-accessed/ Rob - bicycle - Mark Twain said it is good.

• PC crashes after loading the service pack 1 for my Vista Home premium PC.

  My system crashed after I loaded service pak 1. It damaged my recovery partion and I can't boot into Vista Home Premium operatining system. I have a Compaq Presario F572US

  Hi JimmyZ1,

  · You receive an error message or error code when you try to start the computer?

  1. try to start the windows recovery mode repair.

  a. put the Windows installation disc in the disc drive, and then start the computer.

  b. press a key when you are prompted.

  c. Select a language, a time, a currency, a keyboard or an input method, and then click Next.

  d. click on repair your computer.

  e. click the operating system you want to repair, and then click Next.

  f. in the System Recovery Options dialog box, click Startup Repair.

  Startup Repair: frequently asked questions:http://windows.microsoft.com/en-US/windows-vista/Startup-Repair-frequently-asked-questions

  2. If startup repair does not restore the system to the date, it worked great for Windows recovery environment.

  Link: System Restore: frequently asked questions:http://windows.microsoft.com/en-US/windows-vista/System-Restore-frequently-asked-questions

  Link, please refer to: what are the system recovery options in Windows Vista? :http://windows.microsoft.com/en-US/windows-vista/What-are-the-system-recovery-options-in-Windows-Vista

  With regard to:

  Samhrutha G S - Microsoft technical support.

  Visit our Microsoft answers feedback Forum and let us know what you think.

• 3 problem of dongle network after install Vista service pack 1 and 2

  I just installed the Vista SP1 and SP2... before my dongle 3 network worked well.

  Now when I turn on my computer and I put the dongle in a usb port 3 program is show: "No network", before the program 3 showed: "scanner... and after"ready the Connect".. » (SORRY FOR MY ENGLISH!) Mark someone understand me :)

  Now, I need to uninstall the 3Connectez program and after reinstall... now its working. But every day I need uninstall, install... and if possibble I want not to install, uninstall every day.  What is the problem?

  My computer is a Compaq Presario c700 (32 bit OS)

  Hello

  I suggest you download theZTE MF627 dongle drivers on the system and check if the problem is resolved.

   

  If this is not the case, unfortunately the drivers for ZTE MF112 are unavailable and you may need to contact 3 dongles for additional help. Click on the link below.

  http://www.three.co.UK/Help_Support/contact_us/

   

  Thanks and regards.

  Thahaseena M
  Microsoft Answers Support Engineer.
  Visit ourMicrosoft answers feedback Forum and let us know what you think.

• Error after installation of Service Pack 1 for Windows 7

  I use Windows 7 Ultimate and have just upgraded to win 7 SP1, but after installation, this error "AntiVir Scanner from the command line for Windows has stopped working" message whenever I open an application. These applications don't crash, but the forthcoming disorder with them is really annoying, and I don't know how to solve this problem, because I do not use AntiVirus software at the present time. So please help me. Thanks in advance much.

  [IMG] http://i1226.photobucket.com/albums/ee410/bug_bunny145/Untitled_zps82267e02.jpg [IMG]

  I thank very you much. At that time I used too many software use clean boot as a method to check if a program has been the source of this error, so I decided to reinstall Windows 7. I really appreciate your support. ^^

• Acer aspire has stopped working after I installed vista service pack, a

  After installing Vista service pack 1, I was unable to restart my computer. Nothing has worked. I went through the Startup Repair, but it ran all night and nothing. I have no disk, so I tried to do a system restore, but still nothing. I know very little computers if you can give me some details step by step on the following questions would be most appreciated.
  

  (1) how do I back up my data

  (2) how to restore my system

  Thank you

  Craig
  

   

  If the system or Mode restore safe work not and you do not have a Microsoft Vista DVD, make a repair disc to do a Startup Repair:

  Download the ISO on the link provided and make a record of repair time it starts.

  Go to your Bios/Setup, or the Boot Menu at startup and change the Boot order to make the DVD/CD drive 1st in the boot order, then reboot with the disk in the drive.

  At the startup/power on you should see at the bottom of the screen either F2 or DELETE, go to Setup/Bios or F12 for the Boot Menu.

  When you have changed that, insert the Bootable disk you did in the drive and reboot.

  http://www.bleepingcomputer.com/tutorials/tutorial148.html

  Link above shows what the process looks like and a manual, it load the repair options.

  NeoSmart containing the content of the Windows Vista DVD 'Recovery Centre', as we refer to him. It cannot be used to install or reinstall Windows Vista, and is just a Windows PE interface to recovering your PC. Technically, we could re-create this installation with downloadable media media freely from Microsoft (namely the Microsoft WAIK, several gigabyte download); but it is pretty darn decent of Microsoft to present Windows users who might not be able to create such a thing on their own.

  Read all the info on the website on how to create and use:

  http://NeoSmart.net/blog/2008/Windows-Vista-recovery-disc-download/

  ISO Burner:http://www.snapfiles.com/get/active-isoburner.html

  It's a very good Vista startup repair disk.

  You can do a system restart tool, system, etc it restore.

  It is NOT a disc of resettlement.

  And the 32-bit is what normally comes on a computer, unless 64-bit.

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

  Data recovery:

  1. slave of your hard drive in another computer and read/save your data out there.

  2. put your Hard drive in a USB hard drive case, plug it into another computer and read/save from there.

  3 Alternatively, use Knoppix Live CD to recover data:

  http://www.Knopper.NET/Knoppix/index-en.html

  Download/save the file Knoppix Live CD ISO above.

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

  http://isorecorder.alexfeinman.com/isorecorder.htm

  Download the Vista software from the link above.

  After installing above ISO burning software, right click on the Knoppix ISO file > copy the Image to a CD.

  Knoppix is not installed on your PC; use only the resources of your PC, RAM, graphics etc.

  Change the boot order in YOUR computer/laptop to the CD/DVD Drive 1^st in the boot order.

  Plug a Flash Drive/Memory Stick, BOOT with the Live CD, and you should be able to read the hard drive.

  When the desktop loads, you will see at least two drive hard icons on the desktop (one for your hard drive) and one for the USB key.

  Click on the icons of hard drive to open and to understand which drive is which.

  Click the icon for the USB drive and click on "Actions > Change the read/write mode" so you can write to disk (it is read-only by default for security reasons). +

  Now to find the files you want to back up, just drag and drop them on the USB. When you're done, shut down the system and remove the USB key.

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

  Vista recovery media obtain and/or use the Partition Recovery Vista on your computer to the factory settings .

  There is no Vista free download legal available.

  Contact your computer manufacturer and ask them to send a recovery disk/s Vista set.

  Normally, they do this for a cost of $ small.

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

  In addition, ask them if you have a recovery Partition on your computer/laptop to restore it to factory settings.

  See if a manual provided with the computer or go to the manufacturer's website, email or you can call for information on how to make a recovery.

  Normally, you have to press F10 or F11, Acer is normally Alt + F10 at startup to start the recovery process...

  Another way I've seen on some models is press F8 and go to a list of startup options, and launch a recovery of standards of plant with it, by selecting the repair option.

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

  Also ask them if it is possible to do the recovery disk/s since the Partition of recovery in case of hard drive failure or System Crash, when you are replaying the ad.

  .

  They will tell you how to do this.

  Every computer manufacturer has their own way of making recovery disk/s.

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

  Or borrow a good Microsoft Vista DVD (not Dell, HP, Acer, recovery disk/s etc).
  A good Vista DVD contains all versions of Vista.
  The product key determines which version of Vista is installed.

  There are 2 disks of Vista: one for 32-bit operating system, and one for 64-bit operating system.

  If install a cleaning is required with a good DVD of Vista (not HP, Dell recovery disks):

  At the startup/power on you should see at the bottom of the screen either F2 or DELETE, go to Setup/Bios or F12 for the Boot Menu

  Go to your Bios/Setup, or the Boot Menu at startup and change the Boot order to make the DVD/CD drive 1st in the boot order, then reboot with the disk in the drive.

  http://support.Microsoft.com/default.aspx/KB/918884

  MS advice on the conduct of clean install.

  http://www.theeldergeekvista.com/vista_clean_installation.htm

  A tutorial on the use of a clean install

  http://www.winsupersite.com/showcase/winvista_install_03.asp

  Super Guide Windows Vista Installation

  After installation > go to the website of the manufacturer of your computer/notebook > drivers and downloads Section > key in your model number > get latest Vista drivers for it > download/install them.

  See you soon.

  Mick Murphy - Microsoft partner

• Windows Vista Service Pack 2 (KB948465) I get the error code 80092004 and it was not able to load.

  Windows Vista Service Pack 2 (KB948465) I get the error code 80092004 and it was not able to load.

  Free unlimited installation and compatibility support is available for Windows Vista, but only for Service Pack 2 (SP2). This support, initially planned to end on November 26, 2009, has been extended until February 26, 2010. Availability of support chat or messaging differs depending on your location. Some questions may require that more support for which he is advanced a charge.  Go to http://support.microsoft.com/oas/default.aspx?prid=13014&gprid=582034 & select appropriate category (i.e., download problem;) Installation problem; Problems after installing a service pack). ~ Robear Dyer (PA Bear) ~ MS MVP (that is to say, mail, security, Windows & Update Services) since 2002 ~ WARNING: MS MVPs represent or work for Microsoft

• During the installation of Vista Service Pack 2 I get the following error message: ERROR_INVALID_PARAMETER (0 x 80070057)

  Ideas:

  • You have problems with programs
  • Error messages
  • Recent changes to your computer
  • What you have already tried to solve the problem

  Remember - this is a public forum so never post private information such as numbers of mail or telephone!

  80070057 ERROR_INVALID_PARAMENTER - E_INVALIDARG

  What application or antivirus security suite is installed and your current subscription?  What anti-spyware (other than Defender) applications?  What third-party firewall (if applicable)?  Who were these applications that run in the background when you tried to install SP2?

  A (another) Norton or McAfee application has already been installed on this machine (for example, a free trial version which is preinstalled when you bought it)?

  Resources:

  How to fix the Windows Vista and Windows Server 2008 service pack installation issues:
  http://support.Microsoft.com/kb/947366

  Free unlimited installation and compatibility support is available for Windows Vista, but only for Service Pack 2 (SP2). This support, initially planned to end on November 26, 2009, has been postponed until February 26, 2010, so move on! Availability of support chat or messaging differs depending on your location. Some questions may require that more support for which he is advanced a charge.  Go to http://support.microsoft.com/oas/default.aspx?prid=13014&gprid=582034 & select appropriate category (i.e., download problem;) Installation problem; Problems after installing a service pack).

  ~ Robear Dyer (PA Bear) ~ MS MVP (that is to say, mail, security, Windows & Update Services) since 2002 ~ WARNING: MS MVPs represent or work for Microsoft

• Get the Error Message When you try to download and install Vista Service Pack 1

  Hello

  Update Windows guard neglect when you try to download and install Vista Service Pack 1 and I get the error message 80092004.  Please notify.

  Thank you
  Andy

  Hello

  Welcome to the windows vista forums.

  1. stop the Windows Update service (make sure that you are logged on as administrator)

  Click the Start button | Control Panel | System and Maintenance | Administration tools
  Double-click Services.
  (Provide the administrator password or a confirmation if prompted to do so.)
  Right-click the Windows Update service and click on stop.

  2. Click Start, type %windir%\System32 in the search box and press ENTER.

  Find and rename the folder C:\Windows\SoftwareDistribution.

  3. start the Windows Update service

  Start button | Control Panel | System and Maintenance | Administration tools
  Double-click Services.
  (Provide the administrator password or a confirmation if prompted to do so.)
  Right-click the Windows Update service and click Start.

  This procedure will erase your history on the Windows Update Site. Not important.

  Don't forget to restart and then try the update again. If there is no corruption in that
  folder, it would be gone now.

   

  Please, try now to windows update and check if you get the error.

  You can also download the stand-alone SP1 package. You can download the windows vista SP1 by clicking on the link below, please follow the instructions in method 3 in the KB article:

  http://support.Microsoft.com/kb/935791#Method3

  I hope this information is useful.

  Please let us know if you need further assistance.

  Concerning
  Rehman - Microsoft Support