Get an error 'internet service has stopped working"when you are connected to the internet
* Original title: my computer keeps do not stay online, I always get a message saying that the internet service has stopped working and it will constantly, I could make dionostics but in vain
My computer is not online, I get a message that says service is stopped, reconnection. I have DSL service and you run programs to detect a problem, but nothing is
Hello
1. which browser is installed on the computer?
2. What is the full error message?
3 is this a wired or wireless?
4. that all the troubleshooting steps have done?
5 have have there been recent changes made on the computer before the show?
I suggest you follow the methods provided below and update us with the results.
Note: If you are using internet explorer, follow the methods provided.
Method 1: Verify the problem by running Internet Explorer mode without modules.
Temporarily disable all add-ons to see if the modules are the origin of the problem.
To temporarily disable all add-ons:
a. click the Start button.
b. click on all programs, accessories, and click on system tools.
c. click on Internet Explorer (No Add-ons).
If the Internet Explorer (No Add-ons) mode works very well then an add-on may be causing the problem. You will need to re-enable each (process of elimination) in order to determine which one is causing the problem.
http://Windows.Microsoft.com/en-us/Windows7/Internet-Explorer-Add-ons-frequently-asked-questions
Method 2: Optimize Internet Explorer and check.
How to optimize Internet Explorer
http://support.Microsoft.com/kb/936213/no
Warning: Reset the Internet Explorer settings can reset security settings or privacy settings that you have added to the list of Trusted Sites. Reset the Internet Explorer settings can also reset parental control settings. We recommend that you note these sites before you use the reset Internet Explorer settings.
For more information, see the article and check.
Tips for solving problems when Internet Explorer hangs or stops working
http://Windows.Microsoft.com/en-us/Windows7/tips-for-solving-problems-with-Internet-Explorer
Why is my Internet connection so slow?
http://Windows.Microsoft.com/en-us/Windows7/why-is-my-Internet-connection-so-slow
Windows wireless and wired network connection problems
Let us know if it helps!
Tags: Windows
Similar Questions
-
installation of Windows services has stopped working when you try to install the software
Unable to install software.tried cmd method, nothing happens
Original title: installation of windows services has stopped working
Hello Mohit,
Welcome to the Microsoft Community Forums.
I understand that you have a problem with the Windows Installer service.
But I would like to know some more information on this issue to help you better.
(1) what is the full error message?
(2) what software are you trying to install?
(3) have you tried to install any other software?
(4) when you say, "tried cmd method" what exactly mean you?
In the meantime, please try to follow the following suggestions to solve the problem.
Method 1: First of all, try to follow the link below to troubleshoot the Windows Installer Service.
How to fix problems with the Windows service installNote: See "how to reset the computer to start normally after a boot minimum troubleshooting" to prepare the computer to start as usual after a repair.I hope this helps. Otherwise, feel free write us back and we will be happy to help you.
Thank you. -
"automatic update service has stopped working" when you try to install the software
I'm trying to install Canon Imagebrowser provided with my camera. Close program ends the installation process but cannot complete. I then get an error box saying Microsoft serivce Auto Update has stopped working and the installation does not complete. Have tried several times and have the same problem. This has happened with the software Imagebrowser - other software on the CD installed fine.
OK... I thought about it. Go to the link below and follow the instructions to manually install Imagebrowser. It worked for me!
Good luck... -
Error "Windows explore has stopped working" when you open the file in my documents
Original title: opening a file in the folder my documents
Whenever I try to open a file in my documents folder, specifically a CV that I downloaded on a construction site. I get a message that windows Explorer has stopped working?
Hi dalintn,
1. What is the file format of the document?
2. are you able to open documents from other locations?
3. did you of recent changes on the computer?
Check if the similar problem persists when you access the document from any other location on the computer.
Method 1
This error message can occur if there is some system files corrupted on your computer. I suggest that you run a SFC scan, which would be a system file corrupt on the computer search and replace.
The analysis may take some time, so be patient. Windows allows to fix corrupt or missing files it finds. If the information of the installation CD is required to fix the problem, you may be asked to insert your Windows Vista installation CD.
For more information please visit the link below.
How to use the System File Checker tool to fix the system files missing or corrupted on Windows Vista or Windows 7
http://support.Microsoft.com/kb/929833
Method 2
If the previous step fails then I would suggest that you do clean boot and check.
To help resolve the error and other messages, you can start Windows Vista by using a minimal set of drivers and startup programs. This type of boot is known as a "clean boot". A clean boot helps eliminate software conflicts.
See the link below to learn more about how to clean boot.
How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7
http://support.Microsoft.com/kb/929135
Reset the computer to start as usual
When you are finished troubleshooting, follow these steps to reset the computer to start as usual:
(a) click Start, type msconfig in the search box and press ENTER.
(b) If you are prompted for an administrator password or for confirmation, type your password or click on continue.
(c) under the general tab, click the Normal startup option, and then click OK.
(d) when you are prompted to restart the computer, click on restart.
I hope this helps!
Halima S - Microsoft technical support.
Visit our Microsoft answers feedback Forum and let us know what you think.
-
I recently installed Windows 7 Ultimate on my laptop - clean, no upgrade. It's in the CARDS and not a copy of the beta version. When I try to connect to a network share, I get an error. "Windows Explorer has stopped working". If I go to start > run and type in \\servername\users, I'm prompted credentials. I enter domainname\administrator, then the password, as soon as I get an error message indicating that "Windows Explorer has stopped working" then by «Windows Explorer restarts...» "and then refreshes the screen. If I open computer > network > Servername, I invite myself again for credentials, but get the same message. The name of username/password combo does not seem to make a difference.
An additional singularity, I went to control panel > "Backup of your computer", and when I was invited to a network location back up my system, I gave him the same set of location and network credential and the system have been successfully saved to the network drive.
Press Win Logo key + R, type: fsmgmt.msc
If so, open the credentials manager in Control Panel and look for an entry like your network logon. Delete who can clear up.
Messages rating helps other usersMark L. Ferguson MS - MVP
-
Internet has stopped working when it is connected to the Cisco VPN
Hello
I configured IPSec (Ikev1) WHAT VPN remote access in ASA 5520, VPN connects correctly and I am able to access all internal resources but Internet does not work when connected to the VPN. I studied on it and found the problem with the default gateway, I'm ddefault duringVPN gateway connection. I'm surprised in ASA, there is no default gateway configured for the pool of IP VPN remote and remote clients then how can get a default gateway.
I describe my problem below using image in shootout gave it.
Thanks in advanve.
Hi Mukesh,
Until you specify command below according to your group policy, you will get the default gateway assigned by ASA to the user of your vpn. Please update your config strategy & group of tunnel
Group XYZ policy attributes
Split-tunnel-policy tunnelspecified
Split-tunnel-network-list value split tunneltunnel of splitting allowed access list standard 172.16.1.0 255.255.255.0
For anyconnect with split tunnel use below URL help
http://www.Cisco.com/en/us/products/ps6120/products_configuration_example09186a0080975e83.shtml
ASA/PIX: Allow the tunneling split for the VPN Clients on the example of Configuration of ASA
http://www.Cisco.com/en/us/products/ps6120/products_configuration_example09186a0080702999.shtml
HTH
Concerning
Santhosh silou -
Under Vista, I started to get an error message "Superfetch has stopped working".
I am running Vista and I just started getting an error message 'Superfetch has stopped working' y at - it something I can do to fix this? I have read a few articles about Superfetch and know that it is a memory management system, but this is as far as I know.
Hi Anthony-TiloIslam,
· How long have you been faced with this problem?
· You did it last changes before the show?
Try the SFC scan on the computer.
How to use the System File Checker tool to fix the system files missing or corrupted on Windows Vista or Windows 7
http://support.Microsoft.com/kb/929833
I hope this helps.
-
I can't open the PDF with Adobe Reader XI... get an error that "Adobe has stopped working" then it closes. Is it a question of Adobe, Microsoft problem or security issue?
Since you talk about Microsoft, I guess you're on Windows.
Can you open Reader by itself? If so, try to disable the Protected Mode [Edit |] Preferences | (Improved) security].
-
Explorer Windows has stopped working when you click FLVfile
http://go.Microsoft.com/fwlink/?LinkId=104288&clcid=0x0409
Explorer Windows has stopped working when you click FLVfile / video clip downloaded by REALPLAYER
Hello
What version of the windows operating system is installed in the computer?
I suggest you to see link and check. (That applies to windows vista and windows 7)?
Error: Windows Explorer has stopped working
http://support.Microsoft.com/kb/2694911
Note: After checking in the clean boot, follow step: 7 article to reset your computer to normal startup.
Note that it takes as much time to do the upgrade as to reinstall the operating system. In addition, some of your custom Windows settings may be lost through this process.
-
The Setup program stops working when you try to uninstall the installer of qwest
the Setup program stops working when you try to uninstall the software
the Setup program stops working when you try to uninstall the software
Hello
Try uninstaling with revo uninstaller (download the trial for the link.)
Use the advanced uninstall, method, delete the associated files and reg keys.
Good luck
Chyavan
-
the pop up Windows Defender when you are connected to the internet by dial-up readings; change of system in known application, type of change; running applications, cwindowssystem32mswsockdll, I disconnected and then reconnected.
I just ran windows update on a large number of files all successful before this happened, it happens when I am connected to the internet, I use dial-up access
added on 25/11/09 still have the problem mentioned above, even explore two windows are runnibg on the system, or two IE browsers running?
Added 27/11/09 I ave followed all instructions up to and including thefix tool kb/93623, stiil I have this report of windows Defender quickly appearing twice in a row, then I'm disconnected from the internet. any more ideas thanks sam
Visit this link:
http://support.Microsoft.com/kb/936213 -
The battery on my Toshiba NB500 has not been charged since one should use it when you are connected to the power. The battery in the tool bar icon indicates charge but is always 0% available. What could be the problem and how can I solve it?
A problem better put to the support of Tosh or their forums, with regard to their equipment, not MS or Win
-
host process for windows services has stopped working a problem caused the program to stop working correctly windows closes
Original title: host process for windows services has stopped working
See if you have rootkits. Run tddskiller, if it finds rootkits, select cure, wait for it to finish and then restart your computer
-
Error 'setup.exe has stopped working' when installing Quicken.
Original title: setup.exe has stopped working
I have read through the related forums and don't think I've seen a solid answer to this problem. I'm trying to reinstall Quicken on my Dell Inspiron 530 Vista with service pack 2. (Long and ugly tells how he got deleted at first - thank you, Intuit).
When I try to install Quicken, I get the above error message. I tried the clean boot solution; I tried to enter the installation and execution of the exe directly from there; I tried to do a right click to open/run as administrator... etc.
I have NOT run BigFix.com or other third-party software to solve this problem - I'm very comfortable with another piece of software download and throw into the equation. What is a corrupted registry and I have TO run third to fix? Is it a bug of Vista - is there a fix of bug for her?
I really don't like that to 'guilty' at this point, I just want to repair and recover my electronic payments! Help, please!
Hey, Keenon,.
Please, remove all existing components of Quicken from the computer and do a fresh install.
Step 1: use QcleanUI uninstall Quicken
Follow the instructions in the article below for more information on how to use this tool.
The use of QcleanUI to uninstall Quicken
Step 2: Install QuickenRefer to this article for installation help.
Installation of Quicken on Microsoft Windows 7 or Vista
Kind regards
Shinmila H - Microsoft Support
Visit our Microsoft answers feedback Forum and let us know what you think.
-
SE error message "Windows Explorer has stopped working" when you click on network and sharing Center
Original title: Windows Explorer has stopped working when I click on network and sharing and also...
Hello technical savvy people!
Windows Explorer stops working when I click on network and sharing, and also when I click on system.
-Otherwise, I rarely get this little automatic.
But when I do she translates these windows endangered; and then I can't find my connection to the local network, or my IP address,
nor know how my system!Can you suggest healings?
Thank you for your attention,
marlem388Hello
Were there any changes (hardware or software) to the computer before the show?
Perform the steps from the link below and see if it helps.
Error: Windows Explorer has stopped working
Hope this information helps.
Maybe you are looking for
-
Is the latest version of Itunes, one need to use?
I always use the version 11, as he was Darling 'bar' side that shows my library, store and playlists, column 'browser' as well. I remember that some of the more recent version have removed some of the above features and I was wondering if the latest
-
credit card required for free apps on iPad
Why the App Store requires a credit card for the free apps. I was looking to download another browser to access a page that has been load not properly in safari. The App Store has requested a credit card when I tried to download Firefox and another
-
How to customize the Windows Explorer command bar?
Starting with Windows Vista, Microsoft has removed the ability to customize the toolbar at the top of each window in the Windows Explorer, known in Windows Vista, as the command bar. I would like to add some of my own commands to the command bar, suc
-
Pavilion g4-1357TX: problem with other network devices, VGA,.
Hello I just installed 64 bit - Windows 7 on my g4-1357TX Pavilion. Since I use 64 bit OS, I have a problem with my devices. I read a few topics related to this issue. You can find me under drivers for devices of mys: 1 standard VGA graphics card PCI
-
OCR software for F380 all-in-one on OSX Snow Leopard
Hello, I recently upgraded to OS x 10.6.8 on my iMac and lost the ability to recognize the text when scanning. Is there a driver or software I can install to find that? My printer is an all-in-one F380. I already checked the other posts here, but