Get an "Unable to locate required tables" error at startup

Original title: unable to locate required tables

I have windows 7 ultimate 32 bit. When I used my computer last night and stop it, everything was fine. But today morning when I start my PC, instead of the windows loading screen, I get the following message:

"FATAL ERROR: unable to locate the tables needed to make adjustments." Press any key to continue initialization. "

When I press a key, it gives a list of options to start windows in:

(1) safe mode

(2) safe mode with networking

(3) safe mode with command prompt

(4) last known good configuration

(5) start windows normally

When I choose the option 4 or 5, the windows of the loading screen (which says "STARTING WINDOWS") appears after which it hangs or restarts.

When I choose option 1, it loads several files up to a named "CLASSPNP. SYS "(pas sûr dele de nom) after which it hangs or restarts." I tried to start my DVD win 7 to repair my installation but after loading the necessary files, it just reboots or freezes at the loading screen windows.

My PC Config:

Intel Dual Core 2.00GHZ

3 GB RAM DDR2

Seagate 160GB HDD

DVD - RW drive LG

Gigabyte motherboard with BIOS F5 v 945GCMXS2 (I've never risked updated my BIOS).

I do not have any hardware changes since the last successful startup (which was yesterday). Kindly help me with this problem.

Try this:
1. put your BIOS so that it uses the DVD drive as its primary boot device.
2 start the computer with the Windows 7 repair CD or with your Windows 7 installation DVD.
3. press a button if you are prompted to start from the DVD.
4. When prompted, select "Safe Mode Command Prompt".
5 log in as administrator if you are prompted.
6. Select repair when prompted.
7. When you are prompted, select System Restore.
8. set Windows to a point before this problem occurred.
_________________________

If this answer solves your problem, please click "Propose as answer" so that the thread can be closed. Thank you.

Tags: Windows

Similar Questions

  • How to get rid of Microsoft Visual C++ Runtime error at startup. Sometimes after that I turned on the computer before you open any program.

    Once I turn on the computer and before I opened a folder/file/program.

    The box says;

    "Runtime error!"

    Program: C... »

    So I have no idea what program it is. As I know there has been no new program loaded, but it's my wifes computer, so I can't be sure.

    Hello

    Try these methods and see if it helps.

    Method 1:

    Step 1: Start in safe mode and check if you get the error.

    Refer to this link for help:
    http://Windows.Microsoft.com/en-us/Windows-Vista/start-your-computer-in-safe-mode

    Step 2: Clean boot

    Perform a clean boot to verify if a third-party program or service is the cause of the problem.

    Refer to this article for more information:
    How to troubleshoot a problem by performing a clean boot in Windows Vista or Windows 7:

    http://support.Microsoft.com/kb/929135

    Steps to perform a clean boot:

    a. click the ORB start on your desktop
    b. type msconfig in the search box and press ENTER.
    If you are prompted for an administrator password or a confirmation, type the password, or click on continue.
    c. in the general tab, click Selective startup.
    d. under Selective startup, clear the check box load startup items.
    e. click on the Services tab, select the hide all Microsoft Services check box and then click Disable all.
    f. click OK.
    g. When prompted, click on restart.

    NOTE: Please check that you start your computer in normal mode when you are finished troubleshooting. Followstep 7 of the article mentioned above.

    Method 2

    I suggest that you try to run the System File Checker and see if it finds all of the corrupted system files.

    (a) click Start

    (b) type: CMD, according to the results, right-click CMD

    (c) click 'run as administrator '.

    (d) at the command prompt, type: sfc/scannow

    How to use the System File Checker tool to fix the system files missing or corrupted on Windows Vista or Windows 7

    http://support.Microsoft.com/kb/929833

  • at the beginning until you get a message-"Unable to locate the DLL:\language\english.dll language" - How can I get rid of this?

    at the beginning until you get a message-"Unable to locate the DLL:\language\english.dll language" - How can I get rid of this?

    at the beginning until you get a message-"Unable to locate the DLL:\language\english.dll language" - How can I get rid of this?

    Have you Spy Sweeper and uninstalled the software. It seems that other software can also use this driver.

    You can delete the entry start and the error using Autoruns.

    To identify what loads when you start using Autoruns (freeware from Microsoft).
    http://www.Microsoft.com/technet/sysinternals/ProcessesAndThreads/Autoruns.mspx

    With Autoruns, you can deselect an item which disables startup, or you can click with the right button on an item, then remove it. If you clear the check box that you can check back for re - activate the element. It is an approach much safer than editing the registry and better than using msconfig.

    Another useful feature of the program is that you can click with the right button on an item and select search online to get information about the selected item.

  • After the installation of Windows 'important' 3 updates my screensaver started does not. I get a message that says "ScreenSaver:Photo screensaver.scr - unable to locate component".

    Original title: screen saver does not start because MSVCR100.dll was not found

    After the installation of Windows 'important' 3 updates my screensaver started does not. I get a message that says:

    ScreenSaver: Photo screensaver.scr - unable to locate component.

    This application has failed to start because MSVCR100.dll was not found. Reinstalling the application may fix this problem.

    The screen saver starts after you close the error message. I've never had a problem with my screen saver up to that after I downloaded updates. I don't know how to reinstall the application. I tried Windows Fix - It Solutions, but it does not work. He repeated to me that it was a mistake.

    Help, please. Thank you.

    Hello

    It didn't reinstall the ATL update, it reinstalled 2005 Redistributable. So now, I have 2005 and 2010 x 86 both. And it says that two dates installiation are two days after I installed the 2010. I know 2005 and the update was uninstalled, because I checked after restart the computer and before you install the 2010 version. Very curious.

    But my Screensaver works and access to the camera seemed to work after uninstalling / reinstalling the software. So, good. Thank you.

  • Trouble installing iTunes. Get the message "unable to locate network % APPDATA%/. ».

    I am trying to install the latest version of iTunes, but I get the message "Unable to locate % APPDATA%/ network.". I made sure the previous iTunes was uninstalled properly and I found a suggestion on another forum that said "click Start-Run, type regedit (without the quotes) navigate to this registry path:
    HKEY_CURRENT_USER--> Software--> Microsoft--> Windows--> the current Version--> Explorer--> user Shell folders
    Delete the key: recent (right mouse click on the folder/keys, click on delete) close the registry editor and restart the computer. »

    None worked and I have really no idea what to do. I'm not good with computers at all, then I'd be really grateful for the help.

    Try this FixIt:

    Code error '0 x 80070646', '646', or '1606' when you try to install the Office updates

    http://support.Microsoft.com/kb/2258121 "a programmer is just a tool that converts the caffeine in code" Deputy CLIP - http://www.winvistaside.de/

  • Error: "no physical memory is available to the location required for the windows boot manager." The system cannot continue. "

    I have a stable system that works with a processor E6300, card mother evga 680i, graphics card 8800gts and 8gbs of RAM running on ulitmate windows 7 (32 bits - I decided to re - install with 64-bit to use the extra 4 GB of RAM, after I deal with the question below).

    I recently tried to add an adapter of Intel RS2WC080 SAS/SATA controller in a PCI express slots on the card mother 680i. I know that the card works (such as "it works very well in another motherboard), but for some reason when I put it in the 680i mobo I get the following message appears when I try to start windows. (i.e. the raid controller has no windows on the disks. I always use original hard drive always connected on the same Sata port on the motherboard)

    "No physical memory is available to the location required for the windows boot manager." The system cannot continue. "

    I tried to turn off virtually everything I could in the bios of the motherboard as an experience (including the things I needed). I also disabled the Intel RS2WC080 card bios.

    I'm puzzled. So what I want to know is simply a hardware compatibility problem, or is there some kind of workaround I can run in windows 7. For example, is there maybe some sort of way for her to start using a different memory location than its currently using? (Or is it something error message related to the memory of the bios that can only be overcome with software?)

    Thanks for any help.

    I tried to disable everything in the bios... including the things I needed. No luck

    Thank you very much for the reply Chris but I don't have abandoned bascially. Right now I guess the card and the 680i have some kind of incompatibility and I will just get a different mobo.

  • I just bought, installed and registered 6 Lightroom. When I try to launch the product I get a message that says "an internal error has occurred" - could not create the required file: admin/Users / / Library/Application Support/Adobe/Lightroom/filter

    I just bought, installed and registered 6 Lightroom. When I try to launch the product I get a message that says "an internal error has occurred" - could not create the required file: admin/Users / / Library/Application Support/Adobe/Lightroom/Filter Presets. Any ideas on how I can fix this?

    Hi Anthony,.

    You must go to the location: admin/Users / / Library/Application Support/Adobe/Lightroom

    Hold down the CTRL key and click on Lightroom, click on read the information and click the permissions tab.

    Provide the permissions to read and write to your identifier and then close.

    Then reopen Lightroom. You should be able to open Lightroom.

    Please let us know if it helps.

    Kind regards

    Tanuj

  • deployment error: unable to locate all the subVIs screws saved because a Subvi is missing or the VI is not registered in the last version of LabVIEW.

    Hello world

    I want to deploy my project Teststand and got a strange error when creating the image.

    For many additional files with the suffix as .tso, alias, lvlpb, exe, dll... deployment tool launches the error message "unable to locate all the subVIs screws saved because a Subvi is missing or the VI is not registered in the last version of LabVIEW.» (see also the attached picture).

    If I exclude the files of my distribution or set them to "include without treatment or dependencies of elements of" the generation works fine.

    After the error, I checked the Temp folder. The temporary project LV is not yet created.

    I used the deplyoment-installation in the same way within a fromer project and had no problems like that...

    I use Win7 / LV2013 SP1 & Teststand 2013 f1 (5.1.240).

    Could someone help or support? Thank you!

    Finally, I tried the construction with LV2015 & TS2014 - no problems... Everything works fine...

  • Error 'nmapp.exe.unable to locate the component. This application has failed to start because MSVCP 70 .dll is not found"when you connect to the computer.

    Original title:

    Problem: I use DeLL Desktop.When I connect, these messages appear on my screen: nmapp.exe.unable to locate the component. This application has failed to start because MSVCP 70 .dll not found. Re-installing the application may fix the problem. Pls help. Thank you.

    Hello
    1. what version of Windows is installed on the computer?
    2. are you aware of any changes made to the computer, before the show?
    Assuming you have Windows Vista or Windows 7, follow the steps mentioned below.

    Method 1:

    Step 1: Perform a boot minimum troubleshooting and check which application reports this error
    How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7
    http://support.Microsoft.com/kb/929135
    Note: once you have determined the problem by using a clean boot procedure, follow step 7 in the article to restore your computer to normal startup.

    Step 2: reinstall the application.
    Uninstall or change a program
    http://Windows.Microsoft.com/en-us/Windows7/uninstall-or-change-a-program

    Method 2:
    Run an analysis of auditor of system files on your computer and check for the issue.
    How to use the System File Checker tool to fix the system files missing or corrupted on Windows Vista or Windows 7
    http://support.Microsoft.com/kb/929833

    I hope this helps.

  • Error: mmc.exe - Unable to locate component. This application has failed to start because apphelp.dll was not found.

    Original title: this application has failed to start because apphelp.dll was not found.

    A window titled "mmc.exe - Unable to locate component" in the title bar, which includes the message:

    "This application has failed to start because apphelp.dll was not found.  Reinstalling the application may fix this problem. »

    that appears when you access many of the 'administration tools' in the start menu.  e.g. component, computer, event viewer Management Services, etc.

    I'm afraid I accidentally deleted apphelp.dll when cleaning on other files.  I found copies of apphelp.dll in following two tracks.

    AppHelp.dll C:\WINDOWS\$NtServicePackUninstall$ 124KO Extension Application 09/08/2004

    AppHelp.dll C:\WINDOWS\ServicePackFiles\i386 123KO Application Extension 04/13/2008

    I tried Recuva, but he could not find the file.

    How to re - install a such apphelp.dll suggested by the pop - up error message window?

    Thank you

    I thought it would be something that began with "A".

    For low overhead and free, think of Microsoft Security Essentials (MSE).

    MSE and a regularly good scan with the definitions updates using MBAM and SAS (from post above) should keep you in good shape according to your Internet habits.

  • Fix it fails Center with the error: unable to get the catalog of the troubleshooter. Error MatsGetSapCatalog failed

    Original title: Fix it center fails.

    Difficulty Center fails with the error:
    Unable to get the catalog of the troubleshooter. Error MatsGetSapCatalog failed
    I can't find the url of re - download.
    It doesn't seem to be at the Download Center.
    Thank you
    Frank C

    Vista Ultimate 64 bit sp2

    CF. http://answers.microsoft.com/en-us/protect/forum/mse-protect_scanning/scanning-engine-has-stopped-responding/e0f84bec-2555-4279-bfb7-aff691b8ba8d

  • Download other store apps that require a GPS location leads to error messages.

    Original title: Maps
    My position has stopped working over the weekend. Download other store apps that require a GPS location leads to error messages. What have I done?

    Hello

    -What are the error messages that you receive when you download apps? (This will help us find the cause of the problem)

    We will check your zone settings, if they are configured incorrectly to correct us and check if this solves the problem.

    a. on the start screen, enter the Date, press or click settingsand then press or click on define the date and.

    b. the Date and time tab, tap or click on change of time zone.

    c. check if the zone settings are right depending on your region. If you find not bad, change it accordingly and click on apply, Ok.

    Also to synchronize the time on the computer with Internet server by using the step below:

    a. on the Internet time tab, tap or click on change settings.

    b. check the box synchronize with a time server Internet and then tap or click Update now.

    Restart the computer and check that it works very well. If you experience additional problems, you can reply to this post.

  • Standalone downloaded lightroom 6 on a MacBook Pro. Impossible to get a program to open - an internal error cannot create the required folder.

    Downloaded standalone 6 Lightroom on a MacBook Pro. Impossible to get a program to open - an internal error cannot create the required folder. Any suggestions about how to proceed?

    Hi woodysk

    Greetings.

    • You will need to read and write permissions on the Adobe folders manually.

    Please follow the steps below:

    • Right-click on the icon in the Finder and select the 'Go - To' folder option.
    • You will get a text box, type in the following command and then press the 'return '. (Don't miss ~ symbol)
      • ~/Library
    • Then go to the Application Support > Adobe.
    • Right-click on the Adobe folder, then select the GetInfo.
    • Expand the section sharing & permissions.
    • Click on the padlock icon in the lower corner on the right. Enter your administrator user name and password when you are prompted, and then click OK.
    • Please click on '+' symbol, it will open the list of user accounts.
    • Add all of the user accounts and then give permission to "Read & write" to all user accounts. (If not agree, just add currently logged in username and administrator)
    • Click the gear icon and select apply to closed. Close the dialog box for information.
    • Then launch Lightroom application and check.

    Let me know if still face you any issue.

    Concerning

    Rohit

  • I get ERROR U44M1P7: location of the error log file: C:\Program Files (x 86) \Common Files\Adobe\Installers

    Updated Photoshop CS6 (CC) I get ERROR U44M1P7: location of the error log file: C:\Program Files (x 86) \Common Files\Adobe\Installers. First Installation and actual functioning rooms without problem, only on the update. I tried several times with the same error.

    Hi Alberto Pomares

    Please visit the Doc KB: http://helpx.adobe.com/creative-suite/kb/error-u44m1p7-installing-updates-ccm.html

  • Get codes error like "error 80070005" or "could not access network location" or "internal error" when you try to open Acrobat or itunes or access some Web sites.

    I am doing various codes "error 80070005" or "could not access network location" or "internal error" when trying to access acrobat or itunes or some Web sites or that he was trying to perform certain actions such as uninstalling programs.  Here are some of the problems.  A couple of weeks everything worked very well, now there's something blocking me and it's extremely frustrating.

    Hello

    Make sure that you are logged on as administrator.

    Don't forget to check the antivirus product issues and security as a 3rd party firewall (Comodo, on the one hand, a
    has been known to cause this problem.

    It is a very difficult to solve.

    Products of security/antivirus/antispyware are a known cause, so you can turn them off like
    as the test (and that sometimes not really totally removes their influence).

    How to restore the security settings the default settings?
    http://support.Microsoft.com/kb/313222

    The problem here is slightly different, although the solution may be the same.

    Error message when you use Microsoft Update or Windows Update Web sites to install updates on Windows 2000.
    Windows XP and Windows Server 2003: 0 x 80070005
    http://support.Microsoft.com/kb/968003/

    It is usually a permissions problem:

    Please check this link and those that he sites.

    Work your way through my 3 posts here.
    http://social.answers.Microsoft.com/forums/en-us/vistasecurity/thread/200f5140-c2dd-48a5-8CDB-0d8c82ade3cf

    I hope this helps.

    Rob - bicycle - Mark Twain said it is good.

Maybe you are looking for

  • Installation of the Sierra

    It is essential to backup prior to installation of the operating system Sierra?

  • Equium A80-132: do not select options in the Advanced Start menu

    I'm having a problem with my Satellite A80-132... When I start it, it continues to go to the page «windows did not close properly...» Start in safe mode, last known good... etc... » I know it's an operating system error, but the problem is that I can

  • Death by Satellite M30 - what can do?

    The other day, my Satellite M30, I bought in September 2004, turns off suddenly for no apparent reason. Since then, when I try to turn it on, the power LED button lights up for a split second then turn off, and the power led (one on the left) on the

  • Windows Movie Maker 6.0 for the import of Vista problems

    In Windows Movie Maker, when I import AVI movie files, they appear as audio files.

  • Class DriverManager

    Hi, I am creating a blackberry application that access a database of Plesk. I can't use the DriverManager class in BlackBerry Eclipse. Can someone tell me the alternatives? Thank you