Get blue screen errors when running Windows Experience Index.

Similar Questions

• I got the error message "display driver stopped responding and has recovered," when running windows experience index.

  This error continues to occur after I wiped the system and the drivers and reinstalled the. What should I do? My video card is an ultra 8800 which has never had any problems.

  Hello

  See the following article:

  Important: this section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click the following article: back up the registry

  http://Windows.Microsoft.com/en-us/Windows7/back-up-the-registry

  "Display driver stopped responding and has recovered" error in Windows 7 or Windows Vista:

  http://support.Microsoft.com/kb/2665946

• Whenever I run Windows Experience Index to classify this PC, it blocks the PC when it hits the CPU assessment.

  Whenever I run Windows Experience Index to classify this PC, it blocks the PC when it hits the CPU assessment. PC won't stop or restarts, everything seems to lose the video. I have to start cold to get it back. EVGA GeForce Nvidia 8800GT card. Current drivers of Web site. AMD Phenom II 955 Black Edition x 4. New construction on PC.

  Hi Tech55,

  You tried to do a Scan SFC?  Here's how:

  1. click on Start.

  2. click on all programs.

  3. click on Accessories , right-click on command prompt .

  4. click on run as administrator.

  5. If you are prompted for an administrator password or a confirmation, type the password, or click allow or continue.

  6a invites him, type sfc/scannow and press to enter. Once the scan is complete, restart the computer so that the changes take effect

  For more information, please see the link here.

  I hope this helps!

  Debra
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think

• When you try to evaluate the performance of the computer of my PC for the first time in 64-bit Windows 7, I get an error message stating "Windows Experience Index for your system could not be calculated."

  The error message also indicates: "cannot complete the assessment. The assessment or other operation did not complete successfully. This is due to an error reported from the operating system, driver or any other element. »

  I did a full install new (custom) on two WD Raptors (10,00 RPM) RAID 0 (striped).  All used harware succeeded in Vista Ultimate o/s is first available.  Current material as follows:

  Windows 7 Professional 64 bit Build 7600 v6.1.7600
  EVGA nVidia nForce 780i SLI card mother ATX
  Intel Core 2 Extreme QX9650 processor
  8 GB (4x2Go) Patriot Extreme Performance Viper Series DDR2 PC2-6400 low latency memory twin Kit, SLI-Ready (with CL Timings of 4-4-4-12 @ 2.1V)
  2 x WD 150 GB 10 K rpm 16 MB SATA NCQ in RAID 0 (striped)
  Samsung 22 x DVDRW SATA Lightscribe
  750TX (750 watts) Corsair power supply
  2 x OC from BFG GeForce 8800GTS 512 MB GDDR3 video cards in SLI
  Map its Creative SB X - Fi XtremeGamer

  All PC settings are standard (ie: no overclocking component) and all windows updates are completed.  Latest drivers installed for the video & sound cards.  Last firmware & driver for optical drive installed also.

  Any ideas as to why I can't receive a rating system for Windows Experience Index with success?  Thank you

  Stuart

  OK, I was on the phone with support for about an hour.  Problem has been resolved.  Turn user account control either the lower or penultimate level.  This version fixes the problem!

• Blue screen error 0x0000001E on Windows 7 Professional

  Firma problema:
  Problem event name: BlueScreen
  SO version: 6.1.7601.2.1.0.768.3
  Locali impostazioni ID: 1040

  Further information sul problema:
  BCCode: e1
  BCP1: FFFFF80003375610
  BCP2: 0000000000000002
  BCP3: FFFFFA8008AB20E0
  BCP4: FFFFFA8008AB20E0
  OS version: 6_1_7601
  Service Pack: 1_0
  Product: 768_1

  Problem on Acer laptop with Windows 7 teacher ITA

  Hello

  Resolve errors stop (blue screen) in Windows 7 - has a section for if you can or cannot start Windows.
  http://Windows.Microsoft.com/en-us/Windows7/resolving-stop-blue-screen-errors-in-Windows-7

  See this thread for more information on using BlueScreenView, MyEventViewer and other methods of
  Troubleshoot BlueScreens - answers top 3 (+ 1 more).

  http://answers.Microsoft.com/en-us/Windows/Forum/Windows_7-system/sometimes-i-get-a-blue-screen-when-using-IE-8/c675b7b8-795f-474d-a1c4-6b77b3fcd990

  We can analyze the minidumps if make you it available to the SkyDrive or another file
  sharing sites (such as MediaFire). If you have problems to download the copy of minidumps
  for the office or in the Documents folder and download them from there.

  ZIP or download the content of the C:\Windows\minidump

  Use SkyDrive to upload collected files.
  http://social.technet.Microsoft.com/forums/en-us/w7itproui/thread/4fc10639-02dB-4665-993a-08d865088d65

  ============================================================

  BCCode: 1st 0x0000001E

  Remove ALL power and reinstall all the memory cards and cables (both ends when)
  possible) - in fact, remove and replace - do not just tight. This is for a PC and on all
  that can be done for a laptop is reinstall the memory and clear the vents. Make sure the BIOS.
  low level chipset drivers and key device drivers are all up to date by check manually to the
  manufacturer websites.

  Bluescreens many are caused by the BIOS, drivers from the chipset level low and other main device drivers
  that are not the latest, even if the computer is new. Manually check for updates
  using the methods of updates as indicated in the resolution of the problems above and/or the
  methods below (which are the same).
  
  
  BCCode: 1st 0x0000001E

  KMODE_EXCEPTION_NOT_HANDLED bug control has a value of 0x0000001E. This indicates that a kernel-mode program generated an exception which did not catch the error handler.

  Important info if you received a STOP Code

  If you received a blue error screen, or a stop code, the computer stopped abruptly to protect against data loss. A hardware device, its driver or software might have caused this error. If your copy of Windows is shipped with your computer, contact your computer manufacturer. If you purchased Windows separately from your computer, Microsoft provides support. To find contact information for Microsoft or the manufacturer of your computer, Contact Support.

  If you have experience with computers and try to recover from this error, follow the steps in the Microsoft article solution STOP (blue screen) errors in Windows.

  These actions could prevent a mistake like this does not happen:

  1. Download and install updates for your computer from Windows Update device drivers.
  2. Scan your computer for computer viruses.
  3. Check your hard drive for errors.

  KMODE_EXCEPTION_NOT_HANDLED parameters

  The following settings are displayed on the blue screen.

  Cause

  It is a very common bug control. To interpret it, you must identify which exception has been generated.

  Common exception codes include:

  • 0 X 80000002: STATUS_DATATYPE_MISALIGNMENT

    An unaligned data reference was encountered.

  • 0 X 80000003: STATUS_BREAKPOINT

    A breakpoint or ASSERTION was met when no kernel debugger was attached to the system.

  • 0XC0000005: STATUS_ACCESS_VIOLATION

    A memory access violation has occurred. (Parameter 4, verification of bug is the address to which the driver attempted to access.)

  For a complete list of exception codes, see the ntstatus.h file located in the directory of the Windows Driver Kit inc.

  Resolution

  If you do not have to debug this problem, you must use certain basic troubleshooting techniques. If a driver is identified in the bug check message, disable the driver or check with the manufacturer for driver updates. Try changing video cards. Check with your hardware vendor for updates to the BIOS. Disable the BIOS memory options such as implementing caching or shading.

  If you plan to debug this problem, you find it difficult to get a stack trace. Parameter 2 (the address of the exception) should identify the driver or function that caused the problem.

  If the exception code 0 x 80000003 occurs, this indicates that a breakpoint coded hard or assertion was hit, but the system was launched with the /nodebug. switch. This problem should occur infrequently. If it occurs repeatedly, make sure a kernel debugger is connected and the system is booted with the Switch/DEBUG .

  In case of exception code 0 x 80000002, the trap frame will provide additional information.

  If you don't know the specific cause of the exception, the following should be considered:

  Hardware incompatibility. First of all, make sure that all new equipment installed is compatible with the installed version of Windows. For example, you can get information about compatibility with Windows 7 in the Windows 7 Compatibility Center.

  Service system or driver faulty device. In addition, a chauffeur service or defective peripheral system could be responsible for this error. The hardware problems, such as BIOS incompatibilities, conflicts of memory and IRQ conflicts can also generate this error.

  If a driver is listed by name in the bug check message, disable or remove that driver. Disable or remove drivers or services that have been recently added. If the error occurs during the startup sequence and the system partition is formatted with the NTFS file system, you may be able to use Safe Mode to rename or to delete the faulty driver. If the driver is used as part of the start-up procedure of the system Safe Mode, you must start the computer by using the Recovery Console to access the file.

  If the problem is associated with Win32k.sys, the source of the error may be a third-party remote control program. If this software is installed, the service may be removed by the system startup by using the Recovery Console and by removing the offending system service file.

  Check the system log in Event Viewer for additional error messages that might help determine the device or driver responsible for control of bug 0x1E. Disable the cache in the BIOS memory could also resolve the error. You must also run hardware diagnostics, especially the scanner memory, provided by the manufacturer of the system. For more information about these procedures, see the manual of your computer.

  The error that generates this message may occur after the first reboot during Windows Setup, or after installation is complete. A possible cause of the error is incompatibility of the system BIOS. BIOS problems can be solved by upgrading the version of the system BIOS.

  To get a stack trace, if the normal battery monitoring procedures don't

  1. Use the command Ko (display Stack Backtrace) to display the parameters from the stack trace. Look for the call to NT! PspUnhandledExceptionInSystemThread. (If this function is not listed, see the note below.)

  2. The first parameter of NT! PspUnhandledExceptionInSystemThread is a pointer to a structure that contains pointers to an except statement:
     Copy

     typedef struct _EXCEPTION_POINTERS {PEXCEPTION_RECORD ExceptionRecord; PCONTEXT ContextRecord; } EXCEPTION_POINTERS, * PEXCEPTION_POINTERS; ULONG PspUnhandledExceptionInSystemThread (IN PEXCEPTION_POINTERS ExceptionPointers)

     Use the command dd (display memory) to this address to view the data.

  3. The first value retrieved is an exception record and the second is a context record. Use the command .exr (display Exception record) and the command .cxr (display context record) with these two values as arguments, respectively.

• After running the .cxr command, use the kb command to display a stack trace which is based on the registration context information. This stack trace indicates the call stack where the unhandled exception occurred.

Note  This procedure assumes that you can locate NT! PspUnhandledExceptionInSystemThread. However, in some cases (for example an access violation crash) you will not be able to do. In this case, to look ntoskrnl! KiDispatchException. The third parameter passed to this function is a trap frame address. Use .trap (trap Display frame) with this address to define the context of registry to the correct value. You can then perform the stack traces, issue other commands.

BCCode: 1st 0x0000001E<-- read="" this="">
* 1045.html http://www.faultwire.com/solutions-fatal_error/Check-to-be-sure-you-have-adequate-Disk-Space-0x0000001E-

=========================================================

Driver Verifier can help find some BSOD problems:

Using Driver Verifier to identify issues with Windows drivers for users advanced
http://support.Microsoft.com/kb/244617

How to solve the problems of driver in Windows Vista or 7.
http://www.WinVistaClub.com/T79.html

Using Driver Verifier
http://msdn.Microsoft.com/en-us/library/ff554113 (v = VS. 85) .aspx

How to use the Windows Driver Verifier Manager to troubleshoot and identify questionshttp://www.youtube.com/watch?v=_VwIDD9xngM Driver

Driver Verifier
http://www.techsupportforum.com/2110308-POST3.html

Using Driver Verifier
http://www.faultwire.com/solutions/using_driver_verifier.php

How to use Windows drivers check Manager to solve problems and identify the Driver questions
http://www.YouTube.com/watch?v=_VwIDD9xngM

You can disable the driver verifier
http://support.Microsoft.com/kb/244617

Start - type in the box search-> auditor/Reset hit enter to disable

BlueScreenView lets you know if there is a driver specified in the error message. Also check with
MyEventViewer at the blue screen.

If DriverVerifier creates a minidump download the and provide a link to it, then we can analyze it.

----------------------------------------------------------



References to Vista also apply to Windows 7.

It's my generic how updates of appropriate driver: (main drivers and BIOS)

This utility, it is easy see which versions are loaded:

-Free - DriverView utility displays the list of all device drivers currently loaded on your system.
For each driver in the list, additional useful information is displayed: load address of the driver,
Description, version, product name, company that created the driver and more.
http://www.NirSoft.NET/utils/DriverView.html

For drivers, visit manufacturer of emergency system and of the manufacturer of the device that are the most common.
Control Panel - device - Graphics Manager - note the brand and complete model
your video card - double - tab of the driver - write version information. Now, click on update
Driver (this can do nothing as MS is far behind the certification of drivers) - then right-click.
Uninstall - REBOOT it will refresh the driver stack.

Repeat this for network - card (NIC), Wifi network, sound, mouse, and keyboard if 3rd party
with their own software and drivers and all other main drivers that you have.

Now in the system manufacturer (Dell, HP, Toshiba as examples) site (in a restaurant), peripheral
Site of the manufacturer (Realtek, Intel, Nvidia, ATI, for example) and get their latest versions. (Look for
BIOS, Chipset and software updates on the site of the manufacturer of the system here.)

Download - SAVE - go to where you put them - right click - RUN AD ADMIN - REBOOT after
each installation.

Always check in the Device Manager - drivers tab to be sure the version you actually install
presents itself. This is because some restore drivers before the most recent is installed (sound card drivers
in particular that) so to install a driver - reboot - check that it is installed and repeat as
necessary.

Repeat to the manufacturers - BTW in the DO NOT RUN THEIR SCANNER device - check
manually by model.

Look at the sites of the manufacturer for drivers - and the manufacturer of the device manually.
http://pcsupport.about.com/od/driverssupport/HT/driverdlmfgr.htm

Installation and update of drivers under Windows 7 (updated drivers manually using the methods above
It is preferable to ensure that the latest drivers from the manufacturer of system and device manufacturers are located)
http://www.SevenForums.com/tutorials/43216-installing-updating-drivers-7-a.html

If you update the drivers manually, then it's a good idea to disable the facilities of driver under Windows
Updates, that leaves about Windows updates but it will not install the drivers that will be generally
older and cause problems. If updates offers a new driver and then HIDE it (right click on it) and
Then, get new ones manually if you wish.

Stop Windows 7 to automatically install device drivers
http://helpdeskgeek.com/Windows-7/stop-Windows-7-from-automatically-installing-device-drivers/

How to disable automatic driver Installation in Windows 7 / Vista
http://www.AddictiveTips.com/Windows-Tips/how-to-disable-automatic-driver-installation-in-Windows-Vista/

Turn off Windows Update Device Driver search prompt in Windows 7 / Vista (for professionals,
Ultimate and Enterprise)
http://www.AddictiveTips.com/Windows-tips/disable-Windows-Update-device-driver-search-prompt/

==========================================

Tests of memory intercept all errors such as memory do not match (possible even for sticks
seemingly identical) and when the faster memory is placed in system behind the slower memory.
So it is best to Exchange also sticks in and out to check for those, even if all the tests of memory do not
show a problem.

To test the RAM here control - run 4 + hours or so.<-- best="">
www.memtest.org

For the Windows Memory Diagnostic tool.

Start - type in the search-> memory box - find top - click - right Memory Diagnostics tool
RUN AS ADMIN follow the instructions

Windows Vista: How to scan / test your memory with Windows Vista memory or RAM
Diagnostic tool
http://www.shivaranjan.com/2007/11/01/Windows-Vista-how-to-scan-test-your-RAM-or-memory-with-Windows-Vista-memory-diagnostic-tool/

How to run the diagnostic tool memory in Windows 7
http://www.SevenForums.com/tutorials/715-memory-diagnostics-tool.html

I hope this helps.

Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle=""><- mark="" twain="" said="" it="">

• Get blue screen errors. My hard drive died?

  Original title: hard drive crash?

  Finally, my hard drive failed? A few months ago, I had a virus so I had to back up my entire hard drive on my Toshiba laptop. After I did this whenever I started it, I had to press F12 to load device of your choice. Then he said something on the hard drive failure 4, stuff like this press F1 to continue. I usually do and it runs slow but the other day I went through the process, and he came to load Windows XP then blue screened with c:0000218 (a registry file failure). I've tried safe mode, safe mode with command prompt last good known configuration and start normall. I always get blue screen and sends me in a boot loop. I tried also to insert the OS and restore CD that has not been loaded. Went through the process above.

  Finally, my hard drive failed? A few months ago, I had a virus so I had to back up my entire hard drive on my Toshiba laptop. After I did this whenever I started it, I had to press F12 to load device of your choice. Then he said something on the hard drive failure 4, stuff like this press F1 to continue. I usually do and it runs slow but the other day I went through the process, and he came to load Windows XP then blue screened with c:0000218 (a registry file failure). I've tried safe mode, safe mode with command prompt last good known configuration and start normall. I always get blue screen and sends me in a boot loop. I tried also to insert the OS and restore CD that has not been loaded. Went through the process above.

  What do you have with regard to the virus out of your backup drive?

  How - to what support - did you back up your drive?

  Is a version of Norton antivirus or security program installed?

  When you use F12 to select boot device, what device were chosen to boot from?

  The message you have seen 'SMART failure provided on disk hard 4' followed by an identification of the drive?  What disk drive has been identified?

  What happened when you tried to use the CD "OS and recovery?  Please report any error completely, without paraphrasing.

  See the following tips from frequent poster Jose Ibarra:

  For those who STOP: c0000218 error, a chkdsk /r usually will fix you right up and then you will start normally once again, then it will be broken again with the same problem until you run chkdsk /r once again, so you have to work, do what you have to do when you get started - uninstall Norton completely and correctly.

  After the chkdsk/r, you will still be able to boot mode safe but as Norton components not load safe mode and rush through the file system when loading.  Then you can go on the WWW of Norton of the site and use their instructions to get rid of the beast to uninstall...

  [https://www-secure.symantec.com/norton-support/jsp/help-solutions.jsp?lg=english&ct=united+states&docid=20080710133834EN&product=home&version=1&pvid=f-home]

  Here are some instructions in order to at least run the Recovery Console:

  If you have no XP bootable media (or aren't sure you have) create a bootable XP Recovery CD of Console and do not forget.

  This is not the same as recovery disks that might have come with the acquisition of the system store.

  You can make a bootable Recovery Console CD by downloading an ISO file and burn it to a CD.

  The ISO bootable image file you need to download is called:

  xp_rec_con. ISO

  Download the ISO from here:

  http://www.mediafire.com/?ueyyzfymmig

  Use a new CD and this simple and free program to burn your ISO file and create your bootable CD:

  http://www.ImgBurn.com/

  Here are some instructions for ImgBurn:

  http://Forum.ImgBurn.com/index.php?showtopic=61

  It would be a good idea to test your bootable CD on a computer running.

  You may need to adjust the computer BIOS settings to use the CD-ROM drive as the first device to boot instead of the hard drive.  These adjustments are made before Windows tries to load.  If you miss it, you will need to restart the system again.

  When you start on the CD, follow the instructions:

  Press any key to boot from CD...

  Installing Windows... going to pronounce.

  Press 'R' to enter the Recovery Console.

  Select the installation that you want to access (usually 1: C:\WINDOWS)

  You may be asked to enter the password (usually empty).

  You should be in the folder C:\WINDOWS.  It's the same as the

  C:\Windows folder that you see in Solution Explorer.

  The Recovery Console allows base as file commands: copy, rename, replace, delete, chkdsk, fixboot, fixmbr, cd, etc.

  For a list of the commands in the Recovery Console, type help at the prompt of commands or read on here XP Recovery Console:

  http://www.Microsoft.com/resources/documentation/Windows/XP/all/proddocs/en-us/recovery_console_cmds.mspx?mfr=true

  A good idea before you start things must first verify the integrity of your file system by using the chkdsk command.

  In the command prompt window, run the chkdsk command on the drive where Windows is installed to try to fix any problems on the afflicted player.

  Running chkdsk is fine, even if he finds no problem.  It won't hurt anything to run it.

  Assuming your boot drive is C, run the following command:

  CHKDSK C: /r

  Let chkdsk finish to correct the problems, he could find.

  It may take a long time for chkdsk complete or they seem to be "stuck".  Be patient.  If the HARD drive led blinks always, chkdsk is something.  Keep an eye on the amount of the percentage to be sure that it is still making progress.  It may even seem to go back sometime.

  You must run chkdsk/r again until it finds no error to correct.

  Remove the CD, and then type "exit" to exit the RC and restart the computer.

  You have not to set the BIOS to boot the disk HARD since the CD won't be.

• Satellite A200 - blue screen error when you try to open HWSetup

  Hello

  I get a Windows blue screen error everytime I try to open HWSetup or access from Toshiba Flash card using the Fn key.

  Any ideas how to solve this problem?

  See you soon!

  Hello!

  Using Windows Vista?
  If so, you should try to update the Toshiba value added package and hardware configuration. The two you can find on the Toshiba site:

  http://EU.computers.Toshiba-Europe.com-online decision-making supported Downloads & => Download drivers

  Good bye

• Error when running Windows Update 8007371C

  WindowsUpdate_8007371C""WindowsUpdate_dt000 error. "

  * title *.
  "I get the following error when you try to run Windows Update, __WindowsUpdate_8007371C '"WindowsUpdate_dt000__Also, I can't get any other updates to run, I saw an error of Windows install/no running msg.

  Steend,
  In addition to the information requested, try these troubleshooting of beginning steps and let us know the results from them.

  Clean boot your PC, and then run Windows Update.

  Reset the Windows Update components

  Perform operations of KB883825

  Mike - Engineer Support Microsoft Answers
  Visit our Microsoft answers feedback Forum and let us know what you think.

• System crash when I run Windows Experience Index

  Original title: Windows experience index

  Hi, I bought a laptop HP Probook s 4530 2 days. my laptop is:

  Windows Ultimate 64-bit
  CPU: CI3 2350
  RAM: 4G
  And my laptop 2 graphics cards:
  1 ATI Radeon HD M 7470
  2-Intel HD 3000
  My problem is: when I run "Index Windows performance" my laptop will crash and the laptop computer monitor will be disabled. I have to hold the power button down until the laptop is turned off and the new. Please help me.

  Hello

  Did you follow the troubleshooting steps?

  If you did not follow the steps in the previous post, I suggest you to try and see if it helps.

  I would say as you to see the link to use the System File Checker tool (sfc) to troubleshoot missing or corrupted system files in Windows:

  How to use the System File Checker tool to fix the system files missing or corrupted on Windows Vista or Windows 7

  http://support.Microsoft.com/kb/929833

• Windows Vista keeps crashing with blue screen errors when I play

  My windows is crashing for some reason and I can't understand what it is, I have everything updated, the error is as follows:

  Problem event name: BlueScreen
  Versão SO: 6.0.6002.2.2.0.768.3
  Region ID: 2070

  Peruano problem details:
  BCCode: 116
  BCP1: 87CDC250
  BCP2: 8FE2EAFA
  BCP3: 00000000
  BCP4: 00000002
  OS version: 6_0_6002
  Service Pack: 2_0
  Product: 768_1

  Records strategies help the problem:
  C:\Windows\Minidump\Mini081312-01.dmp
  C:\Users\Badnature\AppData\Local\Temp\WER-108623-0.SysData.XML
  C:\Users\Badnature\AppData\Local\Temp\WERB588.tmp.version.txt

  Leia a nossa privacidade declaracao:
  http://go.Microsoft.com/fwlink/?LinkId=50163&clcid=0x0816

  I'd really aprecciate help, thank you for your time

  Hello

  The basic definition of a bugcheck 0 x 116 is:

  There may be a bug in the video driver or video material.

  So I would now explain what means VIDEO_TDR_ERROR. Firstly, TDR is an acronym for Timeout detection and recovery. Detection time and recovery was introduced in Vista and carried over to Windows 7. Rather than exactly what detection time and recovery did exactly, I'll just quote the MSDN article!

  Timeout detection:

  Planner of the GPU, which is part of the DirectX Graphics kernel subsystem (Dxgkrnl.sys), detects that the GPU takes more than the amount of time to perform a particular task. The GPU scheduler then attempts to anticipate on this particular task. Preempt is a timeout 'wait', which is the actual time of TDR. This step is the detection of delay of the process phase. The period of default timeout in Windows Vista and later versions is 2 seconds. If the GPU cannot complete or anticipate the current task period TDR, the diagnostic operating system that the GPU is frozen.
  To avoid detection of timeout to occur, hardware vendors should ensure that graphics operations (i.e. buffer DMA completion) will not take more than 2 seconds in scenarios such as productivity and the game to the end user.

  Preparation for recovery:

  The operating system GPU Scheduler calls the function DxgkDdiResetFromTimeout of the miniport driver of the display to inform the driver that the operating system detected a timeout. The pilot must then resets and reset the GPU. In addition, the driver must stop access to memory and go not material. The operating system and the driver collect material and other State information that might be useful for post-mortem diagnosis.

  Recovery of funds:

  The operating system resets the State appropriate graphics stack. The video memory manager, which is also part of Dxgkrnl.sys, serving all allocations of video memory. The miniport display driver resets the State of the GPU hardware. The graphics stack takes the final steps and restores the receptive office. As mentioned previously, some older DirectX applications could make only in black at the end of this recovery, which requires the user to restart these applications. Well-written 9Ex, DirectX and DirectX 10 and subsequent applications which manage peripheral technology delete continue to function correctly. An application must release and then recreate the Direct3D device and all the objects in the device. For more information on how get the DirectX applications, see the Windows SDK.

  Article here.

  That being said, if the detection time and recovery fails to retrieve the display driver, it will then pull the bugcheck 0 x 116. There are many different things that can cause a 0 x 116, which I'll explain below:

  The following hardware problems may cause a TDR event:

  1 unstable overclock (CPU, GPU, etc.). Return any overclocks to stock settings.

  2 bad sector in memory, resulting in corrupted data is communicated between the GPU and system (memory video, otherwise known as VRAM or physical memory, also called RAM).

  GPU tests: Furmark

  RAM test: Memtest86 +.

  3 corrupt hard drive or install Windows / OS install resulting in corruption in the registry or the page file.

  HARD drive Diagnostics: http://www.carrona.org/hddiag.html

  To reset your swap file, follow these steps:

  (a) go to start... Run... and type "sysdm.cpl" (without the quotes) and press ENTER.

  -Then click on the Advanced tab.
  - then the Performance Settings button.
  - then on the tab advanced following.
  -and then click the virtual memory button.

  (b) in this window, note the current settings of your swap file (so you can restore them later).

  -Then click on the option button "No paging file", and
  - Press the Set"" button. Don't forget, if you have several hard drives, make sure that the paging file is set to 0 on all of them.
  -Click OK to exit the dialog boxes.

  (c) restarted (this will remove the file from your system)

  ((d) then go back following the directions in step one) and re-enter the settings that you noted in step

  (b) follow the steps along the (and including) the reset.

  (e) once you have restarted this second time, go back and make sure the settings are as they are supposed to be.

  Run the System File Checker:

  SFC. EXE/SCANNOW

  Click on start and type "cmd.exe" (without the quotes)

  At the top of the search box, right-click on the cmd.exe and select "Run as Administrator"

  In the black window that opens, type "SFC. EXE/scannow"(without the quotes) and press ENTER.

  Let the program run and after return what he says when it's done.

  -Overheating of the CPU or GPU and or other elements can cause 0 x 116 bugs. Monitor your temperature and ensure that the system is sufficiently cooled.

  -GPU failure. Whether the heat, power (PSU) issue, lack of VRAM, etc..

  The following software issues can cause a TDR event:

  -Incompatible drivers of any kind (two GPU, sound, etc)

  -Messy registry / corrupted

  -DirectX bad files (uninstall and reinstall DirectX)

  -bad system files (System File Checker - has been run on it)

  -Bad driver (some drivers will cause an event due to internal bugs, but they are not nearly as common as many think because of all the previous things, causing the same symptom) - (remove all 3rd party programs and make sure that are not load drivers. Then install only what you need 3rd party stuff and make sure it is the latest version).

  Kind regards

  Patrick

• Computer XP get blue screen error BCCode: f4

  I get this error a while now, here are some details

  Error signature
  BCCode: f4 BCP1: 00000003 BCP2: 89DE7DA0 BCP3: 89DE7F14
  BCP4: 805C8BFC OSVer: 5_1_2600 SP: 3_0 product: 256_1

  technical info
  C:\DOCUME~1\PC\LOCALS~1\Temp\WER5aab.dir00\Mini032311-01.dmp
  C:\DOCUME~1\PC\LOCALS~1\Temp\WER5aab.dir00\sysdata. XML

  Error signature
  BCCode: 77 BCP1: C000000E BCP2: C000000E BCP3: 00000000
  BCP4: 00633000 OSVer: 5_1_2600 SP: 3_0 product: 256_1

  C:\DOCUME~1\PC\LOCALS~1\Temp\WER749b.dir00\Mini041511-01.dmp
  C:\DOCUME~1\PC\LOCALS~1\Temp\WER749b.dir00\sysdata. XML

  Error signature
  BCCode: f4 BCP1: 00000003 BCP2: 8A41F458 BCP3: 8A41F5CC
  BCP4: 805C8BFC OSVer: 5_1_2600 SP: 3_0 product: 256_1

  C:\DOCUME~1\PC\LOCALS~1\Temp\WER688f.dir00\Mini060111-01.dmp
  C:\DOCUME~1\PC\LOCALS~1\Temp\WER688f.dir00\sysdata. XML

  Error signature
  BCCode: 77 BCP1: C0000185 BCP2: C0000185 BCP3: 00000000
  BCP4: CA 033 000 OSVer: 5_1_2600 SP: 3_0 product: 256_1

  C:\DOCUME~1\PC\LOCALS~1\Temp\WER688f.dir00\Mini060111-01.dmp
  C:\DOCUME~1\PC\LOCALS~1\Temp\WER688f.dir00\sysdata. XML

  Hi xperr,

  1. did you of recent changes on the computer?

  2. when exactly you receive the blue screen of death on the computer?

  Bug check 0x77 - KERNEL_STACK_INPAGE_ERROR. "This bug check indicates that the data page of the kernel of the paging requested file cannot be read into memory".

  See the below Microsoft article and try the steps mentioned, check if it helps.

  You receive an error message on a Windows XP-based computer: "Stop 0 x 00000077" or "KERNEL_STACK_INPAGE_ERROR"

  http://support.Microsoft.com/kb/315266

• Machine stops when you run Windows Experience Index or Gaming

  Computer stops offshore (no blue screen, no error message) and start again at the stage of WEI windows aero (also when running games 4. graphic). At first I thought that my GTS 250 card didn't so I bought a new card GTX 550 it now... same question. The machine works great with internet standard navigation or standard windows applications running. I tried all the features following, both before and after the restoration of the entire system of original image...

  (1) computer started in safe mode... WEI may not be running in SafeMode (not solv)

  (2) ran SFC/scannow (has no solv)

  (3) run chkdsk /f /r (has no solv)

  (4) uninstalled the video driver... rebooted in safe mode... Given normal operation... Let windows find the driver (didn't solv)

  (5) uninstalled the video driver... rebooted in safe mode... Given normal operation... Installed the latest drivers (didn't solv)

  (6) uninstalled the video driver... rebooted in safe mode... Given normal operation... Pilot of the previous version (doesn't have a solv)

  (7) Deleted(backed up) all in C:\windows\performance\winsat\dataset... re-ran WEI (has no solv)

  (8) installed realtemp and rivatuner for cpu and gpu temp monitoring... time of normal operation...   (didn't solv)

  (9) removed UPS and UPS software according to the equation (has no solv)

  (10) switched video card generator PCIe 6pin to 4 periphrial power supply plug adapter w two pins plugs (has no solv)

  (11) removed and cleaned cpu, cpu and fan heat sync... apply fresh thermal paste (has no solv)

  (12) Ran through windows Aero troubleshooting steps (see note *) (has no solv)

  *.. .Windows aero troubleshooting...

  Microsoft Fix It reports...

  Issues were found - graphics card does not support the required display settings - install Aero-compatible video card

  Issues were found - graphics card does not support the display settings required - your graphics card doesn't support no DirectX 9.0 or higher, Pixel Shader Model 2.0 or higher, or is not a band bandwidth sufficient memory required to display as the Aero transparency effects.
  Collection of information:
  Computer name: HOST01
  Windows Version: 6.0
  Architecture: amd64
  Time: 2011-12-18 12:27:14

  This problem lasts for more than three weeks now. I have been scowering the Web for solutions but have not yet found one. Y at - there anyone out there who has a solution? Can you help me please?

  The card that is using this machine is an EVGA GTX 550 it w / 1 GB of video ram, this card uses DirectX 11, this card has been bought because of this problem, at first I thought the GTS 250 w / 1 GB of video ram and running DirectX 10 badly shot... card apparenty the GTS 250 wasn't bad and the problem is due to something else.
   
  The architecture of this PC is not amd64, it's a pure machine motherboard intel cpu.

  -System Spec-

  Motherboard: Intel G33

  CPU: Intel Core 2 Quad 2.6 Ghz Q6700

  GPU: Nvidia GTX 550 it w / 1 Gb

  PS: 600w Coolmax w / 140mm fan

  Memory: 8 GB DDR2

  HD: WD 600 GB saliou

  CD: Optiarc DVD RW saliou

  eHD: My Book 1 TB eSata

  OS: WinVista 64 SP2

  DX: DirectX 11

  AV: Security Essentials

  Everything is running the latest versions of drivers and all proposed via Windows Update updates have been applied.

  ------

  Thank you!

  Hello JohnnyBobonny,

  Thanks for the response back.  I'm reviewing other threads you created and show that you have started the thread below.  Do you have, you replace the motherboard and still affected by this problem?  Please let us know status.

  http://answers.Microsoft.com/en-us/Windows/Forum/windows_vista-performance/Windows-restarts-during-Wei-or-gaming/64964718-5c1e-4BD6-9615-e31feb60b922

• Getting blue screen error after changing the registry system, how can I do a system restore

  Vista system was a repair to start and got stuck on 3/3

  I can't start windows or even in safe mode

  I do not have a backup of drive to back up either

  I tried to rename it in the registry, now I get the Blue error message on what ever I did in the registry

  When a BSOD (Blue Screen of Death) the system failure occurs, for most users, there not enough time to fully record what he says. the exact text is important for anyone trying to diagnose what is wrong. You can save time when the error occurs then by following the procedure described below.

  If you already did it disable the auto reboot system error. This should help by allowing the time to write the code to Stop error and related information correctly. Select Start, do a right-click on computer select Properties, advanced, system settings startup and recovery, system failure and uncheck the box before automatically restarting. Re-do not enable automatic restart in the event of system failure after obtaining this information, this setting is the best left to not allow an automatic restart.

  If the failure occurs during the initialization of the computer, you need to try a different approach. You can access the Advanced Options Menu of Windows on multiple computers by constantly pressing the F8 (key) key when starting and selecting the option - disable automatic restart in case of system error. This method is not always easy to use because it may be difficult to press the F8 key at the right time. Try again if it doesn't work the first time. On some computers, a different key must be used.

• blue screen error message: &#60; root Windows &#62;-system 32\ hal.dll. missing or damaged

  Problem: Cannot start (not even in safe mode)

  Operating system: Windows XP pro

  PC: DEll 2400

  Error message on blue screen:
  "Windows did not start because the following is missing or damaged:

  ------System 32\ hal.dll.

  I do not reformat the hard drive and lose all my programs and data.

  If anyone can help, I would be extremely grateful.

  Thank you

  HAL811

  Hello

  I have fixed many times by the steps described in this article...

  http://support.Microsoft.com/kb/330184

  This is not guaranteed because the problem can be reduced to hard drive failure rather than just the corruption of the boot.ini file.

  If it does not solve the problem, post back and I will get back on it.

  Tricky

• C:\Windows\system32\avrt.dll error when running Windows Media Player

  When I turn on my computer or try to run Windows Media, I get the error C:\Windows\system32\avrt.dll. I have Windows Vista Home Premium and Microsoft Media Player version 11. I ran several spyware, viruses and malware, and they come to own. I was told to uninstall media player and then reinstall, but I only get errors when I do. Help, please

  Had the same problem, avrt.dll was corrupted and causing an error with logonui.exe. Sound does not work.

  I copied the avrt.dll from my other computer.
  On a damaged computer, find avrt.dll in your folder windows/system/32:
  (1) make a right click, properties and change the owner to yourself
  (2) once the property is set, you will be able to change permissions
  (3) give you all permissions
  Copy the new avrt.dll in your system32 folder

  Reboot, profit

  You may have to disable the user first access control, you can do so under control panel > users