Get blue screen. Reinstalled by the use of the recovery. Install IE6. Tried to re - install IE8. Does not accept. See below.

Similar Questions

• Satellite M100-150 gets 'blue screen' and resets the bios data

  This problem started months ago.
  Laptop shows sometimes 'blue screen' for unknown reason and constantly does if there's some modern running game graphics.
  After that I always see that the settings bios reset to default values

  What should I do?

  Okay, it looks like some kind of a problem. Could be a hardware problem, but that's just a guess about your situation.

  First, you must perform an update of the BIOS on your computer to make sure that the rom BIOS is OK.

  Then, if the problem persists, I would contact an authorized service partner, since the problem seems more related material.

  If this is the case, visit the following link to find the nearest ASP in your country. Send your machine there for a checkup of material:

  http://EU.computers.Toshiba-Europe.com/cgi-bin/ToshibaCSG/generic_content.jsp?service=EU&ID=ASP_SUPPORT

  Greetings

• have toshiba LL850 want to resize image for the background but have tried most things and still does not

  I have a Toshiba L850 and try to mount an image for the background.  Have you tried the resolution of the screen to pull the lever, but still does not.  Can someone go through the steps for me please.

  Hi June,

  What version of Windows is installed on the computer?

  The articles below show you how to change the background image and set the Position of the image in the Center that it adjusts automatically on the screen.

  Items are for Windows 7 The steps are similar to Windows Vista and Windows 8. However please let me know what version of Windows is installed on the computer and I'll give you the steps for this operating system. When the computer restarts, you'd be able to see the name.

  http://Windows.Microsoft.com/en-us/Windows7/change-your-desktop-background-wallpaper

  http://Windows.Microsoft.com/en-us/Windows7/change-your-desktop-background

  I hope this helps. Get back to us if you need more help.

• new Mac - application of the old series #, which was a PC version, it does not accept

  I series in 2008 numbers, but it does not take my #s series, even though I have 2 Mac install disks (X and XI).  Previous versions were PC (also have #s series.)

  The reason * I * did not is the answer was not correct.  I clearly said, I got of the serial numbers, but doesn't have version 7, or I.   If it was that I could came myself!

  The ANSWER is, I just blew it and installed Acrobat XI, w/o with a serial number of previous requested (which I didn't) in the X version.   The XI "seen" that X has been installed, although I could not open it and allowed the installation. Go figure.

  I have not removed the X version yet b/c I was so tired after you have reinstalled the software on 2 computers and a new, I did not get around him.

  I've been wanting to post the answer somewhere... and do not know the process.

  I was disappointed that nobody never go w / me on the chat... but I was happy that a holiday KGLAD made an attempt.

  It's a good life...

  JoAnne

• Install FlashPlayer does not accept the name of user and password

  Trying to install Flash Player on my Mac.  The Adobe site recognize my user name (email) and password.  But when it comes time to install Flash Player and he asked name of user and password, the box just vibrates.  Why the name of user and password work on the site, but did not accept that for the actual installation?

  Hi adasil,

  If you get the password as mentioned below screen window, then it's the username and password for your MAC computer not Adobe. Also, as PAT said, Flash player is not necessary any Adobe ID or password.

  

  If the user name and password don't work then you should contact Mac

  Thank you

  Nikhil Gupta.

• Reinstall XP on Dell Optiplus 745 series, install CD does not work

  machine is a dell optiplus 745 series with sata H/D and sata DVD when insert the XP cd, nothing happens, do not appear on the monitor, is the another way to install XP Charles

  * original title - have difficulty trying to reinstall XP from scratch, *.

  Go into BIOS and change the boot on the cd drive. Save / reboot. Press a key when she says. And, if you want to AHCI, you need drivers SATA (AHCI is enabled in the BIOS). Or it will crash, before he gets to the configuration screen

• for three days, I am unable to log on my user account who is the administrator. I tried my usual password and does not work. However, the other two users accounts are still functional.

  Remember - this is a public forum so never post private information such as numbers of mail or telephone!

  Ideas:

  • You have problems with programs
  • Error messages
  • Recent changes to your computer
  • What you have already tried to solve the problem

  http://support.Microsoft.com/default.aspx/KB/940765/en-us

  How to use system restore to log on Windows 7 or Windows Vista when you lose access to an account

  Try the information above for this problem, as you know the password.

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

  http://support.Microsoft.com/default.aspx/KB/189126

  "Microsoft's strategy concerning lost or forgotten passwords"

  Microsoft cannot help you recover the passwords of the files and Microsoft who are lost or forgotten product features.

  http://social.answers.Microsoft.com/forums/en-us/vistasecurity/thread/3eba3150-8742-4264-be9f-0daaad2282cd

  Read theBANNING of cracking of passwords information tools information provided in these forums in the thread above posted byBill fill MSFT, moderator

  See you soon.

  Mick Murphy - Microsoft partner

• Get blue screen errors. My hard drive died?

  Original title: hard drive crash?

  Finally, my hard drive failed? A few months ago, I had a virus so I had to back up my entire hard drive on my Toshiba laptop. After I did this whenever I started it, I had to press F12 to load device of your choice. Then he said something on the hard drive failure 4, stuff like this press F1 to continue. I usually do and it runs slow but the other day I went through the process, and he came to load Windows XP then blue screened with c:0000218 (a registry file failure). I've tried safe mode, safe mode with command prompt last good known configuration and start normall. I always get blue screen and sends me in a boot loop. I tried also to insert the OS and restore CD that has not been loaded. Went through the process above.

  Finally, my hard drive failed? A few months ago, I had a virus so I had to back up my entire hard drive on my Toshiba laptop. After I did this whenever I started it, I had to press F12 to load device of your choice. Then he said something on the hard drive failure 4, stuff like this press F1 to continue. I usually do and it runs slow but the other day I went through the process, and he came to load Windows XP then blue screened with c:0000218 (a registry file failure). I've tried safe mode, safe mode with command prompt last good known configuration and start normall. I always get blue screen and sends me in a boot loop. I tried also to insert the OS and restore CD that has not been loaded. Went through the process above.

  What do you have with regard to the virus out of your backup drive?

  How - to what support - did you back up your drive?

  Is a version of Norton antivirus or security program installed?

  When you use F12 to select boot device, what device were chosen to boot from?

  The message you have seen 'SMART failure provided on disk hard 4' followed by an identification of the drive?  What disk drive has been identified?

  What happened when you tried to use the CD "OS and recovery?  Please report any error completely, without paraphrasing.

  See the following tips from frequent poster Jose Ibarra:

  For those who STOP: c0000218 error, a chkdsk /r usually will fix you right up and then you will start normally once again, then it will be broken again with the same problem until you run chkdsk /r once again, so you have to work, do what you have to do when you get started - uninstall Norton completely and correctly.

  After the chkdsk/r, you will still be able to boot mode safe but as Norton components not load safe mode and rush through the file system when loading.  Then you can go on the WWW of Norton of the site and use their instructions to get rid of the beast to uninstall...

  [https://www-secure.symantec.com/norton-support/jsp/help-solutions.jsp?lg=english&ct=united+states&docid=20080710133834EN&product=home&version=1&pvid=f-home]

  Here are some instructions in order to at least run the Recovery Console:

  If you have no XP bootable media (or aren't sure you have) create a bootable XP Recovery CD of Console and do not forget.

  This is not the same as recovery disks that might have come with the acquisition of the system store.

  You can make a bootable Recovery Console CD by downloading an ISO file and burn it to a CD.

  The ISO bootable image file you need to download is called:

  xp_rec_con. ISO

  Download the ISO from here:

  http://www.mediafire.com/?ueyyzfymmig

  Use a new CD and this simple and free program to burn your ISO file and create your bootable CD:

  http://www.ImgBurn.com/

  Here are some instructions for ImgBurn:

  http://Forum.ImgBurn.com/index.php?showtopic=61

  It would be a good idea to test your bootable CD on a computer running.

  You may need to adjust the computer BIOS settings to use the CD-ROM drive as the first device to boot instead of the hard drive.  These adjustments are made before Windows tries to load.  If you miss it, you will need to restart the system again.

  When you start on the CD, follow the instructions:

  Press any key to boot from CD...

  Installing Windows... going to pronounce.

  Press 'R' to enter the Recovery Console.

  Select the installation that you want to access (usually 1: C:\WINDOWS)

  You may be asked to enter the password (usually empty).

  You should be in the folder C:\WINDOWS.  It's the same as the

  C:\Windows folder that you see in Solution Explorer.

  The Recovery Console allows base as file commands: copy, rename, replace, delete, chkdsk, fixboot, fixmbr, cd, etc.

  For a list of the commands in the Recovery Console, type help at the prompt of commands or read on here XP Recovery Console:

  http://www.Microsoft.com/resources/documentation/Windows/XP/all/proddocs/en-us/recovery_console_cmds.mspx?mfr=true

  A good idea before you start things must first verify the integrity of your file system by using the chkdsk command.

  In the command prompt window, run the chkdsk command on the drive where Windows is installed to try to fix any problems on the afflicted player.

  Running chkdsk is fine, even if he finds no problem.  It won't hurt anything to run it.

  Assuming your boot drive is C, run the following command:

  CHKDSK C: /r

  Let chkdsk finish to correct the problems, he could find.

  It may take a long time for chkdsk complete or they seem to be "stuck".  Be patient.  If the HARD drive led blinks always, chkdsk is something.  Keep an eye on the amount of the percentage to be sure that it is still making progress.  It may even seem to go back sometime.

  You must run chkdsk/r again until it finds no error to correct.

  Remove the CD, and then type "exit" to exit the RC and restart the computer.

  You have not to set the BIOS to boot the disk HARD since the CD won't be.

• Blue Screen of Death. STOP error 0x0000007E + things I've tried.

  A bit of history. I run a MSI 890XM-G65 and the installation manual can be found at http://www.msi.com/service/
  I use a Radeon HD 6870 graphics card.
  A SATA HARD DRIVE.

  So. Since I got the BSOD (the o death blu screen), these are the steps I've tried:
  I started pressing F8 and tried to start a repair. BSOD appears.
  I started pressing F8 and tried "Run with the last configuration that worked", same thing.
  I changed my boot on CD/DVD in BIOS and tried from my Windows install disc, BSOD appears.
  I tried to delete my graphics (Radeon) card and attached monitor to the on-board, BSOD arises.
  I tried to use one of my RAM sticks GSKILL (two, distinct moments by themselves) and tried in different locations. I also borrow a new KINGSTON DDR3 ram friends and tried is separately, BSOD appears at reboot.

  I also went through the manual to make sure that all power cords are plugged in etc.

  The error is:
  STOP error 0x0000007E: SYSTEM_THREAD_EXCEPTION_NOT_ STOP 0x7E error means that a system thread threw an exception that the error handler did not. STOP code 0x0000007E may also display the SYSTEM_THREAD_EXCEPTION_NOT_ «»

  Hello

  References to Vista also apply to Windows 7.

  It's my generic how updates of appropriate driver: (look for the BIOS and driver
  updates.)

  This utility, it is easy see which versions are loaded:

  -Free - DriverView utility displays the list of all device drivers currently loaded on
  your system. For each driver in the list, additional useful information is displayed:
  load address of the driver, description, version, name of the product, the company that
  created the pilot and more.
  http://www.NirSoft.NET/utils/DriverView.html

  For drivers, visit system Maker as replacements and manufacturer device which are the
  most up-to-date. Control Panel - Device Manager - Display Adapter - write it down
  and complete the model of your video - double click - tab of the driver card-
  Note the version information. Now click on UPdate Driver (this can do nothing
  that MS is far behind the certification of drivers) - then do a right click - Uninstall - REBOOT it
  will update the driver stack.

  Repeat this for network - card (NIC), Wifi network, sound, mouse, and keyboard
  If there are 3rd party with their own software and drivers and the other main device drivers
  you have.

  Now, go to the site of the manufacturer of system (Dell, HP, Toshiba as examples) (restore)
  and site (Realtek, Intel, Nvidia, ATI, for example) and get the manufacturer and device
  their latest versions. (Look for the system to update the BIOS, Chipset and software updates
  Site of the manufacturer here.)

  Download - SAVE - go to where you put them - right click - RUN AD ADMIN -.
  REBOOT after each installation.

  Always check in the Device Manager - drivers tab to be sure the version you are
  installation actually appears. This is because that some rollback of drivers before the
  later is installed (particularly that audio drivers) so to install a driver - restart
  -check that it is installed and try again if necessary.

  Repeat to the manufacturers - BTW to the device makers DO NOT RUN THEIR
  SCANNER - check manually by model.

  Look at the sites of the manufacturer for drivers - and the manufacturer of the device manually.
  http://pcsupport.about.com/od/driverssupport/HT/driverdlmfgr.htm

  Installation and update of drivers under Windows 7 (updated drivers manually using
  the above methods is preferable to ensure the latest drivers from the manufacturer of system
  and device manufacturers are located)
  http://www.SevenForums.com/tutorials/43216-installing-updating-drivers-7-a.html

  If you update the drivers manually, then it's a good idea to disable driver facilities
  in the updates of Windows, which leaves on Windows updates, but it will not be installed
  pilots who are generally older and cause problems. If updates provides a new
  driver then hide it (right click on it) and then go get new ones manually if
  you want.

  Stop Windows 7 to automatically install device drivers
  http://helpdeskgeek.com/Windows-7/stop-Windows-7-from-automatically-installing-device-drivers/

  How to disable automatic driver Installation in Windows 7 / Vista
  http://www.AddictiveTips.com/Windows-Tips/how-to-disable-automatic-driver-installation-in-Windows-Vista/

  Turn off Windows Update Device Driver search prompt in Windows 7 / Vista (for the)
  Professional, comprehensive and Enterprise edition)
  http://www.AddictiveTips.com/Windows-tips/disable-Windows-Update-device-driver-search-prompt/

  ==========================================

  Tests of memory intercept all errors such as memory do not match (possible
  even for the Poles that seem identical) and when the faster memory is placed
  in the system behind the slower memory. So it is best to also swap sticks in and out
  to check for those even if all the tests of memory are not a problem.

  To test the RAM here control - run 4 + hours or so.<-- best="">
  www.memtest.org

  For Vista/Windows 7 memory diagnostics tool

  Start - type in the search-> memory box - find top Memory Diagnostics tool
  -Right click - RUN AS follows ADMIN instructions

  Windows Vista: How to scan / test your RAM or memory with Windows Vista
  Memory Diagnostic tool
  http://www.shivaranjan.com/2007/11/01/Windows-Vista-how-to-scan-test-your-RAM-or-memory-with-Windows-Vista-memory-diagnostic-tool/

  How to run the diagnostic tool memory in Windows 7
  http://www.SevenForums.com/tutorials/715-memory-diagnostics-tool.html

  I hope this helps.

  Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle=""><- mark="" twain="" said="" it="">

• Re-loaded Windows 8, it does not accept the product key.

  Original title: Windows activation problem 8.

  My computer, running W8.0 of DVDs I bought died.  Dead, dead, dead.

  Now, the new computer my license to load and execute the W8, but demand to be activated.  It does not accept my product code.

  A friend told me that I needed to allow the W8 on the computer that is dead. to be able to use my DVD W8, but I couldn't do that because he is dead.

  How to fix?

  In advance, thank you for your help.

  PS: My W8 DVD is a DVD upgrade.

  You have an 'Upgrade' product that requires the installation of an earlier version of Windows before installing Windows 8.

  You could try phone activation but no guarantees:

  Windows 8 - the phone Activation

  How to activate Windows 8 by phone

  Press the Windows key + x then click Run, then type: slui.exe 4
  (Another method: press Windows + r and then type: slui.exe 4)

  Then press the ENTER"" key.

  Select your "country" in the list.

  Choose the option "activate phone".

  Stay on the phone * do not select/press any option * and wait for a person to help you.

  Clearly state your problem to the support person.

  ================= Alternatives ===================================

  Microsoft - U.S. support
  http://support.Microsoft.com/contactus/?PID=17655&TID=100109454

  Microsoft - UK support
  http://support.Microsoft.com/contactus/?ln=en-GB

  How and when to contact Microsoft and support Customer Service:
  http://support.Microsoft.com/kb/295539
  Clearly explain your problem to the support person and they will transfer you to the activation service

  How to contact a Microsoft Product Activation Center by phone:
  http://support.Microsoft.com/kb/950929

  To get a list of telephone numbers see method #1

  J W Stuart: http://www.pagestart.com

• Getting blue screen error after changing the registry system, how can I do a system restore

  Vista system was a repair to start and got stuck on 3/3

  I can't start windows or even in safe mode

  I do not have a backup of drive to back up either

  I tried to rename it in the registry, now I get the Blue error message on what ever I did in the registry

  When a BSOD (Blue Screen of Death) the system failure occurs, for most users, there not enough time to fully record what he says. the exact text is important for anyone trying to diagnose what is wrong. You can save time when the error occurs then by following the procedure described below.

  If you already did it disable the auto reboot system error. This should help by allowing the time to write the code to Stop error and related information correctly. Select Start, do a right-click on computer select Properties, advanced, system settings startup and recovery, system failure and uncheck the box before automatically restarting. Re-do not enable automatic restart in the event of system failure after obtaining this information, this setting is the best left to not allow an automatic restart.

  If the failure occurs during the initialization of the computer, you need to try a different approach. You can access the Advanced Options Menu of Windows on multiple computers by constantly pressing the F8 (key) key when starting and selecting the option - disable automatic restart in case of system error. This method is not always easy to use because it may be difficult to press the F8 key at the right time. Try again if it doesn't work the first time. On some computers, a different key must be used.

• Blue screen error: 0x0000001a when using system to restore with new hard drive disk

  original title: blue screen error when you use the system disk to restore with new hard drive

  I bought a new hard drive to my computer because the old one gave me a bunch of error messages on screen blues. I installed in the tower and tried to use my restore and system recovery disks that the manufacturer has given me, the process has got to the last disk then asked for the system once again restore disc, and then began to load the last steps and went to blue screen error. I don't know what to do, I mean it's a whole new drive hard, so where could the error come, theres nothing on the hard drive because I have not yet used really, yet. Help, please

  I have finally fixed the problem myself. The problem was that one of the sticks three memory was bad and the only way I could test this error. I took two sticks a left, used disks I had and was able to restore my computer, then I put a stick, turned on the computer, had no errors so I let him, so I put the last stick in and com immediately on, I had the Disconnections: memory management and that's when I knew that the last stick of memory was bad I took it back and now my computer works well and I can't buy more memory for not too. So if someone gets this BOSD error on memory, I'd say 8/10 computers have bad memory (not a number). If youcannot run the tool of diagnosis of memory like me then I would suggest to do what I did with the trial and error, it was the only way to understand the problem. Thanks for your help

• Blue screen on startup, the system restore / repair did not work?

  Hi, I get a blue screen on startup and cannot start windows - with the error code x0000007E.

  I followed the steps on http://support.microsoft.com/kb/958233#StartupRepair however runs the repair does not work, and did the system restore.

  Will be saved my files / is there a way to fix this? Thank you!

  Hello

  You can save your files by putting the drive in another computer as a 2nd disk (best) or external
  Drive USB enclosure and then backup to removable media such as CD, DVD or other USB drives.
  Of course a real store of the computer or the manufacturer of your system can help to recover the files.

  Or you can use a boot Ubuntu CD to back up data.

  Use Ubuntu Live CD to backup files from your Windows computer dead
  http://www.howtogeek.com/HOWTO/Windows-Vista/use-Ubuntu-Live-CD-to-backup-files-from-your-dead-Windows-computer

  --------------------------------------------------------------

  Check this thread for more information using BlueScreenView, MyEventViewer and other methods
  to troubleshoot the BlueScreens - top 3 responses (+ 1 other).

  http://social.answers.Microsoft.com/forums/en-us/vistarepair/thread/3deab2fa-4000-4136-8c78-a3d22b1db009

  We can analyze the minidumps if make you it available to the SkyDrive or another file
  sharing sites.

  ZIP or download the content of the C:\Windows\minidump

  Use SkyDrive download collected files and after shot/screenshot.
  http://social.technet.Microsoft.com/forums/en-us/w7itproui/thread/4fc10639-02dB-4665-993a-08d865088d65

  -------------------------------------------------------------------------

  Also this, so you can see the probable bluescreens.

  Windows Vista restarts automatically if your computer encounters an error that requires him to plant.
  (also Windows 7)
  http://www.winvistatips.com/disable-automatic-restart-T84.html

  ===========================================================

  The system has RAID? If so, it's also very suspicious.

  This error is usually a driver problem and display adapter (video) driver is the most suspicious if she
  may be others. Antivirus/antispyware/security programs, equipment (heat) and major software problems
  can also cause the error. When you get to the section of the driver to use the Troubleshoot utility my generic
  methods in the next message and then return to the if necessary troubleshooting tool.

  Have you recently added hardware or drivers updated? Don't forget to look in Control Panel - Windows
  Updates to see if all drivers have been updated it. Other donor opportunities include the antivirus/anti-
  spyware/security programs.

  When you get to the pilot and sections of the memory of the troubleshooter check the following message to
  update drivers and memory test and then return to the troubleshooter if necessary.

  BCCode: 7F 0x0000007E which is also 0x1000007E

  Cause

  SYSTEM_THREAD_EXCEPTION_NOT_HANDLED bug control is a very common bug control. TO
  interpret, you must identify which exception has been generated.

  Common exception codes are:

  • 0xc0000005: STATUS_ACCESS_VIOLATION indicates a memory access violation has occurred.

  For a complete list of exception codes, see the Ntstatus.h file located in theinc directory
  the Microsoft Windows Driver Kit (WDK).

  Solve the problem

  If you do not have to debug this problem, you must use certain basic troubleshooting techniques.

  • Make sure you have enough disk space.
  • If a driver is identified in the bug check message, disable the driver or check with the
  • Reference of the manufacturer for driver updates.
  • Try changing video cards.
  • Check with your hardware vendor for updates to the BIOS.
  • Disable the BIOS memory options such as implementing caching or shading.

  If you plan to debug this problem, you may find it difficult to get a stack trace. Parameter 2
  (the address of the exception) must identify the driver or function that caused the problem.

  If the exception code 0 x 80000003 occurs, a hard-coded breakpoint or assertion was hit, but the system
  has been launched with the /nodebug. switch. This problem should occur infrequently. If it occurs repeatedly,
  Make sure that a kernel debugger is connected and the system is booted with the Switch/DEBUG .

  In case of exception code 0 x 80000002, the trap frame provides additional information.

  If you do not know the specific cause of the exception, consider the following questions:

  • Hardware incompatibility. Make sure all new hardware that is installed is listed in the
  • List of Microsoft Windows Marketplace tested products.
  • Service driver or defective peripheral system. A service driver or defective peripheral system can be
  • responsible for this error. Hardware problems, such as the incompatibilities of the BIOS, memory, conflicts
  • and IRQ conflicts can also generate this error.

  If a driver is listed by name in the bug check message, disable or remove that driver. Disable
  or remove drivers or services that have been recently added. If the error occurs during startup
  sequence and the system partition is formatted with the NTFS file system, you may be able to use safe
  Mode to rename or to delete the faulty driver. If the driver is used as part of the system startup procedure
  in Safe Mode, you must start the computer by using the Recovery Console to access the file.

  If the problem is associated with Win32k.sys, the source of the error may be a third remote
  control program. If this software is installed, you can remove the boot of the computer service
  by using the Recovery Console, and then by removing the offending system service file.

  Check the system log in Event Viewer for additional error messages that might help identify the
  device or the driver that generated the bug check 0x7E.

  You can also disable memory cache BIOS may try to resolve the error. You should also
  Run the diagnostics of material, especially the scanner memory, which provides the manufacturer of the system.
  For more information about these procedures, see the manual of your computer.

  The error that generates this message may occur after the first reboot during Windows Setup, or
  Once the installation is complete. A possible cause of the error is lack of disk space for installation and system
  BIOS incompatibilities. For problems during the installation of Windows that are associated with the absence of disc
  space, reduce the number of files on the disk drive hard target. Find and delete any temporary
  the files that you do not have to have files hidden Internet, backup application and.chkfiles files that
  contain fragments of file saved to disk scans. You can also use another hard drive with more drive
  free space for the installation. You can solve the problems of BIOS by upgrading the version of the system BIOS.

  BCCode: 7F 0x00000007E who is also a 0x1000007E<-- read="" this="">
  * 1141.html? order = votes http://www.faultwire.com/solutions-fatal_error/System-thread-exception-not-HANDLED-0x0000007E-

  ----------------------------------------------------------------------------------------------------------------------

  Look in the Event Viewer to see if something is reported on those.
  http://www.computerperformance.co.UK/Vista/vista_event_viewer.htm

  MyEventViewer - free - a simple alternative in the standard event viewer
  Windows. TIP - Options - Advanced filter allows you to see a time rather
  of the entire file.
  http://www.NirSoft.NET/utils/my_event_viewer.html

  Here are a few ways to possibly fix the blue screen issue. If you could give the blue screen
  info that would help. Such as ITC and 4 others entered at the bottom left. And all others
  error information such as codes of STOP and info like IRQL_NOT_LESS_OR_EQUAL or PAGE_FAULT_IN_NONPAGED_AREA and similar messages.

  As examples:

  BCCode: 116
  BCP1: 87BC9510
  BCP2: 8C013D80
  BCP3: 00000000
  BCP4: 00000002

  or in this format:

  Stop: 0 x 00000000 (oxoooooooo oxoooooooo oxoooooooo oxooooooooo)
  Tcpip.sys - address blocking 0 x 0 00000000 000000000 DateStamp 0 x 000000000

  It is an excellent tool for displaying the blue screen error information

  BlueScreenView scans all your minidump files created during ' blue screen of the.
  death ' crashes and displays information about all accidents of a table.
  Free
  http://www.NirSoft.NET/utils/blue_screen_view.html

  BlueScreens many are caused by drivers of old or damaged, in particular the video drivers
  However, there are other causes.

  You can do mode if necessary safe or the Vista DVD command prompt or
  Options recovery if your system is installed by the manufacturer.

  This tells you how to access the System Recovery Options and/or a Vista DVD
  http://windowshelp.Microsoft.com/Windows/en-us/help/326b756b-1601-435e-99D0-1585439470351033.mspx

  You can try a system restore to a point before the problem started when one exists.

  How to make a Vista system restore
  http://www.Vistax64.com/tutorials/76905-System-Restore-how.html

  -------------------------------------------------------------------------

  Start - type this into the search-> find COMMAND to top box and RIGHT CLICK-
  RUN AS ADMIN

  Enter this at the command prompt - sfc/scannow

  How to analyze the log file entries that the Microsoft Windows Resource Checker (SFC.exe)
  program generates in Windows Vista cbs.log
  http://support.Microsoft.com/kb/928228

  The log can give you the answer if there is a corrupted driver. (Does not work
  tell all possible driver issues).

  Also run CheckDisk, so we cannot exclude as much as possible of the corruption.

  How to run the check disk at startup in Vista
  http://www.Vistax64.com/tutorials/67612-check-disk-Chkdsk.html

  -------------------------------------------------------------------------

  Often drivers up-to-date will help, usually video, sound, network card (NIC), WiFi, part 3
  keyboard and mouse, as well as of other major device drivers.

  Look at the sites of the manufacturer for drivers - and the manufacturer of the device manually.
  http://pcsupport.about.com/od/driverssupport/HT/driverdlmfgr.htm

  How to install a device driver in Vista Device Manager
  http://www.Vistax64.com/tutorials/193584-Device-Manager-install-driver.html

  How to disable automatic driver Installation in Windows Vista - drivers
  http://www.AddictiveTips.com/Windows-Tips/how-to-disable-automatic-driver-installation-in-Windows-Vista/
  http://TechNet.Microsoft.com/en-us/library/cc730606 (WS.10) .aspx

  -------------------------------------------------------------------------

  How to fix BlueScreen (STOP) errors that cause Windows Vista to shut down or restart
  quit unexpectedly
  http://support.Microsoft.com/kb/958233

  Troubleshooting, STOP error blue screen Vista
  http://www.chicagotech.NET/Vista/vistabluescreen.htm

  Understanding and decoding BSOD (blue screen of death) Messages
  http://www.Taranfx.com/blog/?p=692

  Windows - troubleshooting blue screen errors
  http://KB.wisc.edu/page.php?id=7033

  -------------------------------------------------------------------------

  In some cases, it may be necessary.

  The Options or Vista recovery disk Startup Repair

  How to do a startup repair
  http://www.Vistax64.com/tutorials/91467-startup-repair.html

  This tells you how to access the System Recovery Options and/or a Vista DVD
  http://windowshelp.Microsoft.com/Windows/en-us/help/326b756b-1601-435e-99D0-1585439470351033.mspx

  I hope this helps.

  Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle="" -="" mark="" twain="" said="" it="">

• I keep getting blue screens on Page_Fault_In_Nonpaged_Area with technical information stop: 0 x 00000050 (0xD8CE3000, 0 x 00000000, 0 x 00000000, 0X82E77D2C).

  I work as a tech TI and at present, we use laptops Lenovo x 230, I have install Windows 7 Enterprise N and then General programs such as internet browsers, some software to sync files, a bunch of business called Visual files, and other small pieces such as Adobe Reader, etc.

  I keep getting blue screens on Page_Fault_In_Nonpaged_Area with technical information stop: 0 x 00000050 (0xD8CE3000, 0 x 00000000, 0 x 00000000, 0X82E77D2C). What happens on several machines and renders useless about 10 laptops for us because we use images of machine.

  I tried to use known last good config, I searched the corrupt drivers suggested in other posts, but they are not present, the center of the action cannot stop and I couldn't debug tool to work. Antivirus software can not also be that no problem because it is installed as part of the standard image.

  Forgive me if I posted this to the wrong topic area and any ideas would be greatly appreciated as this has been a matter of concern to me for almost 6 months now.

  Original title: Blue Screen Windows 7 Enterprise N

  We need the DMP file because it contains the single record of the sequence of events that led to the accident, what drivers have been loaded, and what has been loaded.
  You may be able to get the DMP files without crashing by booting in SafeMode (F8) with networking.
  If you are overclocking stop.  (chances are if you are unsure if you are, you are not) a
  To allow us to help you with symptoms BSOD on your computer, download the contents of your folder "\Windows\Minidump".  We need at least 2 FILES DMP to diagnose and confirm
  
  The procedure:
  * Copy the contents of \Windows\Minidump to another location (temporary) somewhere on your machine.
  * Zip up the copy.
  * Join ZIP archive to your message by using the button (attachments) "trombone". (if available on your site, MS has this)
  * Please download to a service like Skydrive or "Rapidshare" to share files and put a link to them in your answer.

  Link to find out how to download below.
  http://www.WikiHow.com/use-SkyDrive

  
  To ensure the minidumps are enabled:
  * Click Start, in the search box, type: sysdm.cpl, press ENTER.
  * On the Advanced tab, click Startup and recovery... Settings button.
  * Make sure that automatically restart is unchecked.
  * Under the writing debugging information header, select image partial memory (256 KB) in the list box drop-down (varies from 256kb).
  * Ensure to that small Dump Directory is listed as % systemroot%\Minidump.
  * OK your way out.
  * Reboot if changes have been made.
  
  Please also run MSinfo32 and download the output as well.
  To run MSinfo32 please go to start > run > MSinfo32
  Go to 'file', 'save' and download the PDF is saved with the DMP
  (Instructions for XP, Vista, Win 7, Win 8)

  System specs are extremely useful then please include everything you know.

  The Zigzag3143.com team 

• Computer gets blue screen every day "wl merger.exe.

  Good day, IM having some problems with my toshiba satellite (15'6 A665-s5181 notebook pc intel core i5 - 480 m), the computer works pretty well, its when I stop working, blue screen appears and the computer stops its happens at least once a day, the computer does no harm at all to restart... when I check the CENTER of the ACTION to see what caused the screen blue its says failed to apply : WL merger.exe a work stoppage.   Located in the file updatus NVIDIA.

  Help

  I suspect that the "Trojans" might partially explain the weird behavior. They can basically upload other stuff to your PC once they have smuggled themselves on it.

  You download SP1 via Windows update? Have you tried to install it manually? See - http://windows.microsoft.com/en-US/windows7/install-windows-7-service-pack-1 and the link "Download and installation of SP1 from the Microsoft Download Center" on this page. Who installs it OK?

  I hope that the NVIDIA driver update will fix the problem that you were re

  ' merger.exe wl'

  The result of the SFC is good news.

  If you do not get an installation disc, its always a good idea to do a repair disc. Just in case where, it can be useful sometimes.

  Update and run Malwarebytes again, to make sure that nothing has reappeared.

  AND make sure your AV package (depending on what you are using) is up-to-date and run a scan with that.

  Back up your data before any significant change just as a precaution to prevent you from losing everything you need, if things go wrong, as an accident during the SP1 update.

  EDIT - 1. to cause such things - " Trojan.BHO, Trojan.agent, banker spyware," is perhaps a good idea to change a web site password you use esp for sites banking etc. It is difficult to say what these might be, but some of these types of attacks are designed to steal information and passwords and other.

  2. make sure that your firewall works. Go to this site, click https://www.grc.com/x/ne.dll?bh0bkyd2 go ahead and run the tests - at least the good test ports. If your FW working ports must display them under (not open or closed) and you should see a nice green SUCCESS.