Get boxes from left to right

I created a RadioGroup and added 3 radio buttons, I want to show them on the screen next to each other, rather than on the other.

I can't understand this in C++. Here's what I have so far, but it shows them on top (I create a stackLayout from left to right first, and then add the group inside):

Container* radioButtonContainer = Container::create();
     radioButtonContainer->setLayout(StackLayout::create()
     .orientation(LayoutOrientation::LeftToRight));
     radioButtonContainer->setHorizontalAlignment(HorizontalAlignment::Center);

RadioGroup *group = RadioGroup::create()             .add(Option::create().text("Easy").image("image1.png").selected(true))
.add(Option::create().text("Medium").image("image2.png"))
.add(Option::create().text("Hard").image("image3.png"));
radioButtonContainer->add(group);

Any help is appreciated. Thank you

I'm not sure you can do what you ask.

That means your code is to order the child elements of the radioButtonContainer LeftToRight and as the only direct child element that you have is the RadioGroup not Options, it behaves properly.

Theres no translation on only Options which was my next thought, so I think that you are left with your own customcontrol implementation.

Or a little hacky, three radiogroups away with an option each which affect others with their own logic.

Tags: BlackBerry Developers

Similar Questions

  • How do cells range from left to right instead of top down?

    I'm working on a large worksheet that must be printed in several sheets.

    How to load the worksheet to get cells from left to right, i.e., by line rather than up and down, i.e. the column?

    You can try this (perhaps in a copy of your worksheet, in the case that this isn't what you are looking for).  Click in the data table and choose table > transpose the rows and columns.

    SG

  • I just changed my signature of account Windows Live Hotmail E-mail via the menu options, and since then, a big grey box appears on the emails that extends from left to right and is also important.

    Hello!

    A few weeks, I just change my signature to email hotmail via the menu options, and since then, a big grey box appears on the emails that extends from left to right and is also important. I went into the signing options, re-created the signature, and for 3 weeks completely removed the signature, but I always get the grey box display. Email being accessible via www.hotmail.com, and I don't have the problem, when I answer emails via my iPad2.

    Any help will be greatly appreciated, so that e-mail can be sent to the search normally. Thank you!

    Hi Paul,.

    The question you posted would be better suited to the Windows Live community. Please visit the link below to find a community that will provide the support you want.
    http://windowslivehelp.com/product.aspx?ProductID=2

  • How can I get the status bar of firefox to view more details url from left to right?

    The part of the poster for details display in url text status bar from the chops on the middle and displays more than left to the far right information. I don't like on the right side - I need to see more text from left to right. I am able to view either the left side as much as possible hiding the right side, or am I able to display a certain way full status bar information?

    This change seems to come when I upgraded from v.4 to v. 7.1. (I'm running it under Windows).

    Your description is too ambiguous, but Status-4-Evar extension restores the use of the features of status bar in the bar of replacement modules, explicit directions in this page of mine. The arrangement of its parts is customizable.

    Please mark "resolved" a response that will better help others with a similar problem - hope it was her.

    You can make Firefox 7.0.1 look to Firefox 3.6. *, see numbered items 1-10 of the next topic difficulty Firefox 4.0 UI toolbar, problems (make Firefox 4.0 to 8.0, resemble 3.6). If you make changes, you must be aware of what has changed and what it takes to use changed or missing features.

  • Whenever I play youtube videos, they shake from left to right and to go at different speeds.

    I have windows 7. A couple of days, I went to play youtube videos and they all shake from left to right and go at different speeds (very erratic). This ONLY happens with videos from youtube (HTML5). When I play other videos(non-HTML5), they play very well. Also, the sound on youtube videos are fine, only they do not match the mouth (s) of people talking. The mouth move faster. I've checked all my plug-ins and everything is up-to-date. My firefox browser is also the last version. I did a malwarebytes scan and it came up with nothing. All the settings on the youtube videos are also where they should be. It happened for about 5 days. Can someone help me?

    Thanks Guigs. I followed your instructions and found out it was a 'acceleration hardware problem' that was the origin of the problem. I unchecked the box and YouTube videos play very well! Thank you for taking the time to help me.

  • My window fills the entire page from left to right and covers my taskbar. I can size to the bottom of the window to remove it. Has just begun.

    I keep my taskbar on the right side. Suddenly, the FF browser window fills the screen from left to right and covers, and hide my taskbar. This just started today. How can I get my taskbar visible again. Explain it very simply to please.

    A quick way to switch between a larger and a resizable window is to double-click on the title bar (the area above the tabs). Which does nothing?

    If the tabs go all the way to the top of the screen and fill all the space, then there is not place to double-click. Then you'll need to use either the "middle button" between lower and close buttons, or Alt + bar spacing and r for restore.

  • want to make a sound move from left to right

    don't know if there is a function or I have to do it manually...

    I have a piece of his (kind of Chorus), who I want to come the song on the left side to slowly move it to the right and go back there...

    How to do?

    tried a few thing with the track of duplication and to work with the pan, but he can't get the way I like to

    Thank you!

    The pan automation curve track is that we have to move a sound from left to right and back.

    You have linked to set control points in the curve of pan automation command channel by clicking on the curve and then by sliding the control to the desired position points?

  • Locking the view from left to right on iPad, so can only scroll

    Hi all!

    Very new to all this.  I've done a few worksheets that I am very satisfied.  They consist of long lists of inventory and adjustments of table on the screen of my iPad perfectly from left to right.  All is needed is to scroll through hundreds of entries.

    But on the iPad, it is very easy to also scroll to the right while you're sliding your finger "down".  This exposes the large white area to the right of my table, and I have to drag around to get my map centered on the screen.  Is it possible to keep this locked?

    Thank you
    Jared

    Best post in discussions of iWork for iOS , because this one is for the numbers for Mac. However, the general approach is the same.

    As much as I know there is no way to "lock" a table instead of a way that it does not disappear off the coast of the visible part of the Web. But maybe you don't have to worry about locking it. To move to the top of your table just wide from top left to bottom-right. To move to the bottom of the wide table from lower left to upper right. Sliding slightly to the right in both cases you can keep your table in the view.

    The movement is similar to a trackpad on Mac. It will become second nature after a while.

    SG

  • scrolling from left to right.

    How can I get the full width of the page to display.   Tired of scrolling from left to right.  Sometimes 'shift' and roll mouse wheel working... but no longer.  Even this page should scroll side by side.  Thank you

    I'll take a wild guess and my reply address for the zoom level in internet Explorer "this page Even" being the only reference you gave to a program or document that is too wide for your screen.

    SHIFT + is not a good combination. Perhaps you were inadvertently pressing the CTRL key while pressing the SHIFT as Ctrl + is the correct method to adjust the zoom level.

    You can also adjust the zoom for Internet Explorer with these methods:

    • Press Alt and select View, Zoom level.
    • Press Ctrl + or Ctrl +.
    • Click change zoom level menu in the lower right corner of the window of the Internet Explorer application.

  • Adjust the picture that goes from left to right

    I have a picture that goes from left to right, and when I saw it I see white on both sides.

    How can I solve this problem?

    Thank you

    Joe

    If the image is placed inside a box, be sure to mark the icon full width in the top menu.

    Make sure that scaling to fit is indicated in the section filling also.

  • TileLayout from left to right

    Hello

    I am trying to create a grid of 10 X 10 with the tileLayout points in a list.

    It works until I get to over 100 articles.

    When there are more than a 100 points, I want to add a new column and not a line, if the grid extends in width and not the height.

    When is use the property 'requestedRowCount' of the TileLayout for this, it only works the grid is now filled from top to the bottom instead of left to right.

    Someone at - it a tip of how set the layout from left to right?

    my list:

    <s:List id="ticketList"
              x="0" y="0" 
              dataProvider="{incidentModuleModel.quadrantTickets.getItemAt(quadrantNumber) as ArrayCollection}"
              contentBackgroundAlpha="0"          
              height="172"                    
              width="100%"
              minWidth="172">
         <s:layout>               
              <s:TileLayout id="tileLayout"                                               
                               requestedRowCount="10"                                               
                               horizontalGap="0"
                               verticalGap="0"
                               orientation="columns"  />
         </s:layout>
    </s:List>
    

    TileLayout_Problem.png

    Looks like you might want to look into creating a custom layout.  Blog of Evtim has lots of good information on this subject, for example: http://evtimmy.com/2009/06/flowlayout-a-spark-custom-layout-example/

  • Problem: Build a VI to display a string in the table of the lights. Each letter must be posted in a separate table and letters must move from one table to the other in the direction from left to right.

    Hi all

    Problem: Build a VI to display a string in the table of the lights. Each letter must be posted in a separate table and letters must move from one table to the other in the direction from left to right.

    I did program mentioned above but it does not work. Can you tell me what is the problem?

    There is no error is indicated in the program. If someone knows about it please try to find solutions and help me out of this problem.

    I have attached my program with this message.

    Thank you in advance!

    (1) FOR loops are your friend here.  You can make a slight restructuring using loops, and then you will have less mess to deal with, the inner loop through tunnels of autoindexing to make it even simpler.

    (2) I would only treat the numeric values of the characters.  So go terminal of control of the chain, the capital letters and byte array to before the outer loop.  You can use a size of Board over there to tell how many times the outer loop to iterate.

    (3) the Index table is extensible.  So you only need over the index of the first, and it will increment itself, as it develops.

    (4) you need to finish the lookup table (table 3D)

  • Whenever the computer is started, two different styles of start menu appear on the screen, divided vertically from left to right.

    Original title: is this monitor or windows?

    This condition began while I was running xp sp 3.

    I worked in google earth at the time.

    I don't remember exactly what happened.

    But now, every time I start windows, two different styles of the start menu

    appear on the screen, divided vertically from left to right.

    The menu on the right can only be extended to about half of the control panel to the left.

    The menu on the left can grow to the right once the right image has been reduced.

    I tried to reset the start menu in the program settings without success.

    Anyone have any ideas?

    I hope that I was clear enough with this info.

    The article you referred to seems to apply to vista and windows 7.

    How ever, before I received your reply I had already solved the problem myself"

    I appreciate the proposed both help Lisa M and Azeez 'n'

    No further assistance is necessary.

    Thanks again.

  • Re-size pages from left to right?

    Hi-

    I use windows from DOS, now have Vista. Probably, this applies to most of the BONES.

    All windows / pages re-size from the lower right, or down, or right of the panels. Everything is just left. I'm looking to resize the pages of the FOUR corners and sides top or left of the panels - from left to right, from top down. Basically, I want to be able to focus in on any section of a page.  Can't do it now.

    Any way to do this in Windows? All programs, utility?

    Thank you in advance.

    T

    Hello imd1tv,

    I believe you are referring to Internet Explorer, correct?

    The only way to do what you say, I think you already do, which is resizing the window and using the window's scroll bars to place the website section in the visible section of the window. Other than that, I know no way, or third-party applications to accomplish what you are looking for.

    Hope this helps

    Chris.H
    Microsoft Answers Support Engineer
    Visit our Microsoft answers feedback Forum and let us know what you think.

  • Cursor starts moving across the screen from left to right after the wake up the computer from standby or hibernation

    Original title: cursor goes wild

    My PC to 'wake up' sleep/hibernate, the cursor initially moving across the screen from left to right, in which window is open, destroy all the document is on the screen. I force Windows to close. How to solve this other than turning off standby/hibernation?

    Looks like the cursor of the mouse is very sensitive when the computer comes out of standby or hibernation.
    I suggest that you go in the mouse properties and lower the sensitivity and see if that helps.
    You also need to update any driver mouse if possible.

    Let us know if that helps.

    Marilyn

Maybe you are looking for