Get CellularNetworkInfo networkinfo problem network name.

I want to get the name of the network and it does not work.

CellularNetworkInfo networkinfo;

Hi, I tested the API on 10.2 and it seems to work as expected. I used the following code:

void ApplicationUI::retrieveNW()
{
bb::device::CellularNetworkInfo networkinfo;
qDebug()<<"Network Name: "<
And received the following console output:
Network Name: "Bell"

Tags: BlackBerry Developers

Similar Questions

Laptop WiFi problem, «identifying...» (network name) ».
Hello
I'm having a problem with the wireless on my laptop. Its a HP Pavilion dv6000 and just under a year of age. I had no problems with the wireless until recently. I use the laptop at home and usually the internet is very well (apart from the occasional disconnection), but when I'm at school do frequently connect to the school network (I am a student of the University, and there are several routers throughout the school and in the many buildings). Sometimes it will connect in one building and I'll switch to another and it does not connect. Each time, he does not connect it always says "identifier...". (wireless network name) ». No amount of repair, restart or reset the network card it won't connect. The strange thing is that sometimes it connects to the router in this building (i.e. library) and sometimes it won't. Whenever I have check the status shows that the laptop is received but does not send do not.
Help! This problem is really starting to annoy me and I don't want to end up throwing my laptop on the whole of the library.
Hello
1st brand one Restore Point so that you can return back if necessary (it shouldn't be though).
How to create a Vista System Restore Point

http://www.Vistax64.com/tutorials/76332-system-restore-point-create.html
How to make a Vista system restore

http://www.Vistax64.com/tutorials/76905-System-Restore-how.html
--------------------------------------------------------------------------
Actually try updating your driver and disabling the network logon.
Control Panel - network - write down of the brand and the model of the Wifi - double click top - tab of the driver - write
version - click the driver update (cannot do something that MS is far behind the pilots of certification). Then
Right click on the Wifi device and UNINSTALL - Reboot - it will refresh the driver stack.
Look at the sites of the manufacturer for drivers - and the manufacturer of the device manually.

http://pcsupport.about.com/od/driverssupport/HT/driverdlmfgr.htm
How to install a device driver in Vista Device Manager

http://www.Vistax64.com/tutorials/193584-Device-Manager-install-driver.html
Download - SAVE - go where you put it - right click – RUN AS ADMIN.
You can download several at once however restart after the installation of each of them.
After watching the system manufacturer, you can check the manufacturer of the device an even newer version. (The
manufacturer of system become your backup policies).
Repeat for network (NIC) card and is a good time to get the other updated drivers as Vista like
updated drivers.
I would also turn off auto update for the drivers. If the updates Windows suggests a just HIDE as they
are almost always old, and you can search drivers manually as needed.
How to disable automatic driver Installation in Windows Vista - drivers

http://www.AddictiveTips.com/Windows-Tips/how-to-disable-automatic-driver-installation-in-Windows-Vista/

http://TechNet.Microsoft.com/en-us/library/cc730606 (WS.10) .aspx
------------------------------------------------------
Do another restore Point then you can go back to where you were if necessary with new active pilots.
Make sure you know the details of connection to your wireless router - SSID and password.
You lose connection when you do and have to redo your logon.
I would like to delete ALL networks, so you can restore if necessary.

Control Panel - Network & Sharing Center - right, click Customize - page set of network locations.
lower left click on merge or delete network locations - REMOVE all instances of your network (and the
others you don't use anymore) - REBOOT. Start - Connect To log on to the network.
-----------------------------------------------------
Check this box:
Strange problem with Internet under Vista

http://www.catonett.com/blog/archives/194
Windows Vista cannot obtain an IP address from certain routers or some non-Microsoft DHCP servers

http://support.Microsoft.com/kb/928233/en-us
----------------------------------------------------
And:

Network connection problems

http://windowshelp.Microsoft.com/Windows/en-us/help/33307acf-0698-41ba-B014-ea0a2eb8d0a81033.mspx
I hope this helps.
Rob - bicycle - Mark Twain said it is good.

Why do I get the message 'a network error occurred during the processing of your order'? I was able to print an album without problem about a month ago
I am trying to print a photo book, but get the message "a network error occurred during the processing of your order. Please check your network connection and try again. I had no problem with the printing of a book about a month ago.
Start in Safe Mode, Mac OS x: Safe Mode bootand try to order from there.
Don't forget to check out the book before ordering this Apple; Get an overview of a project on paper in Photos, iPhoto or Aperture to avoid problems - Apple Support. Save the PDF to be compared with the printed version when coming out.

Whenever I connect to internet I get this message within seconds, Internet Explorer has stopped working the check online for a solution of the problem event name: the BEX Application name: IEXPLORE. EXE
ExploInternet Internet exporer has stopped working
Windows can check online for a solutiom to the problem
-> OnlinCheck check online for a solution and close the program
-> Close the don't
PROBLEM ISEVIDENT
Signature of the problem:
Problem event name: BEX
Application name: IEXPLORE. EXE
Application version: 11.0.9600.18231
Application timestamp: 56b8edd6
Fault Module name: StackHash_d7b8
Fault Module Version: 0.0.0.0
Fault Module Timestamp: 00000000
Exception offset: 1002ab36
Exception code: c0000417
Exception data: 00000000
OS version: 6.1.7601.2.1.0.768.3
Locale ID: 3081
Additional information 1: d7b8
More information 2: d7b83704f6db94e0c4619825a3362866
3 more information: 6b 15
Additional information 4: 6b153378e67b448e43ca3c57dc8920c9
Then, I lose the page and have courses all over again.
Can someone please help. It started only happening more than a week.
Hello
Thank you for your response. Check this link and follow the post SpiritX for troubleshooting steps.
Please let us know how it goes for help us to you more.

Remove the old cable network name machine Vista
I have 4 computers on a home network (2 portable wireless, Windows 7 and Vista) and 2 desktops (also Windows 7-Vista) to Windows 7 computers, replacing Vista computers in the near future. Until them, I always use the four computers.
I had a LOT of problems (unable to access printers and printers go offline) sharing printer and recently started having "Windows cannot access \\theWindows7newdesktopcomputer", those with printers attached - and I could / can not find a solution for this. In desperation, I have reset the Linksys router e2500 manufactured back State initial and in the process gained a new network name (do not change).
My problem is that the old Vista computer wired to the router insists on the use of the old network name (the one that appears on the screen of the network and sharing Center). The funny thing is that I put on Jack autour with him (nothing has changed on the router) I have now access to the Internet on the old Vista computer wired to the router, even if she seems to be using the former name of network. So, how can I get the Vista computer to recognize the new network name and quit using the former name of network. I spent all day on this problem and I am not farther than I was when I started working on the problem of this morning on the printer share. I guess that the router works because these two computers are connected to the router, but it doesn't look good for me and it seems that it must be something I can change or correct.
Ron in round rock
Try to remove from the network and sharing Center by clicking on the Home icon next to network name and go to mergere or delete network locations. I guess you know what to do after that.
If it is used, then unplug your ethernet cable and try again.

problem signature: problem event name: bluescreen: stop 0xA
Problem event name: bluescreen
The system version: 6.0.6002.2.2.0.768.3
Locale ID: 2057
Additional information on the problem:
BCCode: a
BCP1: 000000F0
BCP2: 0000001 B
BCP3: 00000001
BCP4: 836E75AE
OS version: 6_0_6002
Service Pack: 2_0
Product: 768_1
Hello
Check this thread for more information on using BlueScreenView, MyEventViewer and other methods of
Troubleshoot the BlueScreens - top 3 methods (+ 1 other).
http://social.answers.Microsoft.com/forums/en-us/w7repair/thread/c675b7b8-795f-474d-a1c4-6b77b3fcd990
We can analyze the minidumps if make you it available to the SkyDrive or another file
sharing sites.
ZIP or download the content of the C:\Windows\minidump
Use SkyDrive to upload collected files.

http://social.technet.Microsoft.com/forums/en-us/w7itproui/thread/4fc10639-02dB-4665-993a-08d865088d65
----------------------------------------------------------
BCCode: 0a 0x0000000A
Check these KB
Error message on a blue screen on a computer that is running Windows 7 or Windows Server
2008 R2: "STOP: 0X0000000A"

http://support.Microsoft.com/kb/979444
Stop error message on a computer that is running Windows 7 or Windows Server 2008 R2 and
who has the iSCSI storage: "0x0000000A"

http://support.Microsoft.com/kb/979711
Those and 5 other KB Articles are available

http://support.Microsoft.com/search/default.aspx?mode=a&query=0x0000000A&SPID=14019&catalog=LCID%3D1033&1033comm=1&Res=10
-----------------------------------
BCCode: 0a 0x0000000A
Drivers could be at fault, however the problems of disk or security/antivirus/antispyware products are
just as likely to be the root cause that they can force a driver to corrupt or go out of bounds.
The video driver or something affecting it would be questionable.
Make sure that the drivers, BIOS and chipset of low-level drivers are all updated by checking manually
system manufacturer and device manufacturers sites.
Below I'll post a generic bluescreen convenience store and in the next message how to upgrade
drivers and BIOS as well as controls memory.
-----------------------------------
BCCode: 0a 0x0000000A
Cause
This bug check is issued if the memory paged (or invalid) is accessible when the IRQL is too high.
The error that usually generates this bug check occurs after the installation of the faulty device driver or service system, BIOS.
If you encounter a bug 0xA control during the upgrade to a later version of Windows, this error can be caused by a device driver, system service, an anti-virus or a backup tool that is not compatible with the new version.
Solve the problem
If a kernel debugger is available, get a stack trace.
To resolve an error caused by the faulty device driver or service system, BIOS

Restart your computer.
Press F8 to character-based menu that displays the choice of operating system.
In the Windows Advanced Options menu, select last known good Configuration . This option is most effective when a pilot or a service is added at a time.
To resolve an error caused by an incompatible device driver, system service, virus scanner, or backup tool

Check the system log in Event Viewer for error messages that may identify the device or driver that caused the error.
Try disabling the cache in memory of the BIOS.
Run the diagnostics of equipment provided by the manufacturer of the system, in particular the scanner memory. For more information about these procedures, see the manual of your computer.
Make sure that the latest Service Pack is installed.
If your system has cards (SCSI) small computer system interface, contact the card manufacturer for updated Windows drivers. Try to disable sync negotiation in the SCSI BIOS, check the wiring and the SCSI ID of each device and confirming the proper termination.
For devices (IDE) peripheral electronic integrated, set the built-in as only primary IDE port. Also, check each IDE device to the right setting master/slave/stand alone. Try to remove all IDE devices except for the hard drives.
If the message appears during installation of Windows, make sure that the computer and installed devices are listed in the list of the products tested Microsoft Windows market.
Comments
Before upgrading to a new version of Windows, remove all third-party device drivers and system services and disable any antivirus. Contact software manufacturers for updates of these third-party tools.
BCCode: 0a 0x0000000A<-- read="" this="">
* 1025.html http://www.faultwire.com/solutions-fatal_error/IRQL-not-less-or-Equal-0x0000000A-
==================================================================
Look in the Event Viewer to see if something is reported on those.

http://www.computerperformance.co.UK/Vista/vista_event_viewer.htm
MyEventViewer - free - a simple alternative in the standard Windows Event Viewer.
TIP - Options - Advanced filter allows you to see a period of time instead of the entire file.

http://www.NirSoft.NET/utils/my_event_viewer.html
-------------------------------------------------------------------------
Also this, so you can see the probable bluescreens.
Windows Vista restarts automatically if your computer encounters an error that requires him to plant.

http://www.winvistatips.com/disable-automatic-restart-T84.html
-------------------------------------------------------------------------
Here are a few ways to possibly fix the blue screen issue. If you could give the blue screen
info that would help. Such as ITC and 4 others entered at the bottom left. And all others
error information such as codes of STOP and info like IRQL_NOT_LESS_OR_EQUAL or PAGE_FAULT_IN_NONPAGED_AREA and similar messages.
As examples:
BCCode: 116
BCP1: 87BC9510
BCP2: 8C013D80
BCP3: 00000000
BCP4: 00000002
or in this format:
Stop: 0 x 00000000 (oxoooooooo oxoooooooo oxoooooooo oxooooooooo)
Tcpip.sys - address blocking 0 x 0 00000000 000000000 DateStamp 0 x 000000000
It is an excellent tool for displaying the blue screen error information
BlueScreenView scans all your minidump files created during ' blue screen
of death "crashes and displays the information about all crashes in one
Table - free
http://www.NirSoft.NET/utils/blue_screen_view.html

BlueScreens many are caused by old or damaged, in particular the video drivers drivers however
There are other causes.
You can do mode if necessary safe or the Vista DVD command prompt or
Options recovery if your system is installed by the manufacturer.
How to start on the System Recovery Options in Windows 7

http://www.SevenForums.com/tutorials/668-system-recovery-options.html
You can try a system restore to a point before the problem started when one exists.
How to do a system restore in Windows 7

http://www.SevenForums.com/tutorials/700-system-restore.html
-------------------------------------------------------------------------
Start - type this in the search box-> find COMMAND at the top and RIGHT CLICK – RUN AS ADMIN
Enter this at the command prompt - sfc/scannow

How to fix the system files of Windows 7 with the System File Checker

http://www.SevenForums.com/tutorials/1538-SFC-SCANNOW-Command-System-File-Checker.html
How to analyze the log file entries that the Microsoft Windows Resource Checker (SFC.exe) program
generates cbs.log Windows Vista (and Windows 7)

http://support.Microsoft.com/kb/928228
The log can give you the answer if there is a corrupted driver. (Says not all possible
driver problems).
Also run CheckDisk, so we cannot exclude as much as possible of the corruption.
How to run the check disk at startup in Windows 7

http://www.SevenForums.com/tutorials/433-disk-check.html
-------------------------------------------------------------------------
Often drivers up-to-date will help, usually video, sound, network card (NIC), WiFi, part 3
keyboard and mouse, as well as of other major device drivers.
Look at the sites of the manufacturer for drivers - and the manufacturer of the device manually.

http://pcsupport.about.com/od/driverssupport/HT/driverdlmfgr.htm
How to install a device driver in Vista (also Windows 7) Device Manager

http://www.Vistax64.com/tutorials/193584-Device-Manager-install-driver.html
How to disable automatic driver Installation in Windows Vista - drivers

http://www.AddictiveTips.com/Windows-Tips/how-to-disable-automatic-driver-installation-in-Windows-Vista/

http://TechNet.Microsoft.com/en-us/library/cc730606 (WS.10) .aspx
-------------------------------------------------------------------------
How to fix BlueScreen (STOP) errors that cause Windows Vista to shut down or restart
quit unexpectedly

http://support.Microsoft.com/kb/958233
Troubleshooting Vista Blue Screen, error of JUDGMENT (and Windows 7)

http://www.chicagotech.NET/Vista/vistabluescreen.htm
Understanding and decoding BSOD (blue screen of death) Messages

http://www.Taranfx.com/blog/?p=692
Windows - troubleshooting blue screen errors

http://KB.wisc.edu/page.php?id=7033
-------------------------------------------------------------------------
In some cases, it may be necessary.
Startup Options recovery or Windows 7 disk repair
How to run a startup repair in Windows 7

http://www.SevenForums.com/tutorials/681-startup-repair.html
How to start on the System Recovery Options in Windows 7

http://www.SevenForums.com/tutorials/668-system-recovery-options.html

How to create a Windows 7 system repair disc

http://www.SevenForums.com/tutorials/2083-system-repair-disc-create.html
How to do a repair installation to repair Windows 7

http://www.SevenForums.com/tutorials/3413-repair-install.html
I hope this helps.

Problem event name: screen, blue ID:1033 locale
Hi all
I just got a problem in my system (Windows 7). When I looked on the net, suddenly the hanging system and automatically turns off. After 30 seconds, it is still once restarted. I have the login in safe mode and check the reason for the question. It displays an error message as below.
When the system hanged I was using Google crome, then I tried Internet explorer, I suspect not all restart, but sometimes system changes and going to normal after 30-40 seconds. I use Kaspersky antivirus update.
Signature of the problem:
Problem event name: BlueScreen
The system version: 6.1.7600.2.0.0.256.1
Locale ID: 1033
More information about the problem:
BCCode: 116
BCP1: FFFFFA80019574E0
BCP2: FFFFF88004627CB0
BCP3: 000000000000000
BCP4: 000000000000002
OS version: 6_1_7600
Service Pack: 0_0
Product: 256_1
Files helping to describe the problem:
C:\Windows\Minidump\081313-15475-01.dmp
C:\Users\Name\AppData\Local\Temp\WER-51745-0.SysData.XML
Can someone help me to identify and correct the error.

We need the DMP file because it contains the single record of the sequence of events that led to the accident, what drivers have been loaded, and what has been loaded.

WE NEED AT LEAST TWO FILES DMP TO SPOT TRENDS AND TO CONFIRM THE DIAGNOSIS.

You may be able to get the DMP files without crashing by booting in SafeMode (F8) with networking.

If you are overclocking stop. (chances are that if you are unsure if you are, you are not)

To allow us to help you with symptoms BSOD on your computer, download the contents of your folder "\Windows\Minidump".

The procedure:

* Copy the contents of \Windows\Minidump to another location (temporary) somewhere on your machine.

* Zip up the copy (compress)

* Please download to a service like Skydrive or "Rapidshare" to share files and put a link to them in your answer.

Link to find out how to download below.

http://www.WikiHow.com/use-SkyDrive

To ensure the minidumps are enabled:

* Click Start, in the search box, type: sysdm.cpl, press ENTER.
* On the Advanced tab, click Startup and recovery... Settings button.
* Make sure that automatically restart is unchecked.
* Under the writing debugging information header, select image partial memory (256 KB) in the list box drop-down (varies from 256kb).
* Ensure to that small Dump Directory is listed as % systemroot%\Minidump.
* OK your way out.
* Reboot if changes have been made.

Please also run MSinfo32 and download the output as well.

To run MSinfo32 please go to start > run > MSinfo32

Go to 'file', 'save' and download the PDF is saved with the DMP

System specs are extremely useful then please include everything you know.

Blue screen view and that crashed are often wrong and should only be used in case of emergency...

You can learn more about BSOD here

You will learn how to test your memory here

Problem signature: problem event name: BlueScreen OS Version: 6.1.7601.2.1.0.768.3 locale ID: 1033
Signature of the problem:
Problem event name: BlueScreen
OS version: 6.1.7601.2.1.0.768.3
Locale ID: 1033
More information about the problem:
BCCode: f4
BCP1: 0000000000000003
BCP2: FFFFFA8005726B30
BCP3: FFFFFA8005726E10
BCP4: FFFFF800031E0460
OS version: 6_1_7601
Service Pack: 1_0
Product: 768_1
Files helping to describe the problem:
C:\Windows\Minidump\111812-128154-01.dmp
C:\Users\Roberto Martinez\AppData\Local\Temp\WER-181694-0.sysdata.xml
We need the DMP file because it contains the single record of the sequence of events that led to the accident, what drivers have been loaded, and what has been loaded.

You may be able to get the DMP files without crashing by booting in SafeMode (F8) with networking.
If you are overclocking stop. (chances are that if you are unsure if you are, you are not)
To allow us to help you with symptoms BSOD on your computer, download the contents of your folder "\Windows\Minidump".

The procedure:

* Copy the contents of \Windows\Minidump to another location (temporary) somewhere on your machine.
* Zip up the copy.
* Join ZIP archive to your message by using the button (attachments) "trombone".
* Please download to a service like Skydrive or "Rapidshare" to share files and put a link to them in your answer.

To ensure the minidumps are enabled:
* Click Start, in the search box, type: sysdm.cpl, press ENTER.
* On the Advanced tab, click Startup and recovery... Settings button.
* Make sure that automatically restart is unchecked.
* Under the writing debugging information header, select image partial memory (256 KB) in the list box drop-down (varies from 256kb).
* Ensure to that small Dump Directory is listed as % systemroot%\Minidump.
* OK your way out.
* Reboot if changes have been made.

Please also run MSinfo32 and download the output as well.
To run MSinfo32 please go to start > run > MSinfo32
Go to 'file', 'save' and download the PDF is saved with the DMP
(Instructions for XP, Vista, Win 7, Win 8)

blue screen problem. Problem event name: BlueScreen

OS version: 6.1.7601.2.1.0.768.3

Locale ID: 1033
Signature of the problem:
Problem event name: BlueScreen
OS version: 6.1.7601.2.1.0.768.3
Locale ID: 1033

More information about the problem:
BCCode: 1000008e
BCP1: C0000005
BCP2: 8B2BD7E0
BCP3: 8F03F924
BCP4: 00000000
OS version: 6_1_7601
Service Pack: 1_0
Product: 768_1

Files helping to describe the problem:
C:\Windows\Minidump\090912-29265-01.dmp

Read our privacy statement online:
http://go.Microsoft.com/fwlink/?LinkId=104288&clcid=0x0409

If the online privacy statement is not available, please read our offline privacy statement:
C:\Windows\system32\en-US\erofflps.txt

Hello
Driver Verifier can help find some BSOD problems:
Using Driver Verifier to identify issues with Windows drivers for users advanced

http://support.Microsoft.com/kb/244617
How to solve the problems of driver in Windows Vista or 7.

http://www.WinVistaClub.com/T79.html
Using Driver Verifier

http://msdn.Microsoft.com/en-us/library/ff554113 (v = VS. 85) .aspx
How to use the Windows Driver Verifier Manager to troubleshoot and identify questionshttp://www.youtube.com/watch?v=_VwIDD9xngM Driver
Driver Verifier

http://www.techsupportforum.com/2110308-POST3.html
Using Driver Verifier

http://www.faultwire.com/solutions/using_driver_verifier.php
How to use the Windows Driver Verifier Manager to troubleshoot and identify questionshttp://www.youtube.com/watch?v=_VwIDD9xngM Driver
You can disable the driver verifier

http://support.Microsoft.com/kb/244617
Start - type in the box search-> auditor/Reset hit enter to disable
BlueScreenView lets you know if there is a driver specified in the error message. Also check
with MyEventViewer at the blue screen. If necessary, you can post the minidumps
Thus, they can be analyzed.
-------------------------------------------------------------------------------------------------------------------

References to Vista also apply to Windows 7.
It's my generic how updates of appropriate driver: (look for updates to the BIOS and the driver).
This utility, it is easy see which versions are loaded:
-Free - DriverView utility displays the list of all device drivers currently loaded on your system.
For each driver in the list, additional useful information is displayed: load address of the driver,
Description, version, product name, company that created the driver and more.

http://www.NirSoft.NET/utils/DriverView.html
For drivers, visit manufacturer of emergency system and of the manufacturer of the device that are the most common.
Control Panel - device - Graphics Manager - note the brand and complete model
your video card - double - tab of the driver - write version information. Now, click on update
Driver (this can do nothing as MS is far behind the certification of drivers) - then right-click.
Uninstall - REBOOT it will refresh the driver stack.
Repeat this for network - card (NIC), Wifi network, sound, mouse, and keyboard if 3rd party
with their own software and drivers and all other main drivers that you have.

Now in the system manufacturer (Dell, HP, Toshiba as examples) site (in a restaurant), peripheral
Site of the manufacturer (Realtek, Intel, Nvidia, ATI, for example) and get their latest versions. (Look for
BIOS, Chipset and software updates on the site of the manufacturer of the system here.)
Download - SAVE - go to where you put them - right click - RUN AD ADMIN - REBOOT after
each installation.
Always check in the Device Manager - drivers tab to be sure the version you actually install
presents itself. This is because some restore drivers before the most recent is installed (sound card drivers
in particular that) so to install a driver - reboot - check that it is installed and repeat as
necessary.

Repeat to the manufacturers - BTW in the DO NOT RUN THEIR SCANNER device - check
manually by model.
Look at the sites of the manufacturer for drivers - and the manufacturer of the device manually.

http://pcsupport.about.com/od/driverssupport/HT/driverdlmfgr.htm
Installation and update of drivers under Windows 7 (updated drivers manually using the methods above
It is preferable to ensure that the latest drivers from the manufacturer of system and device manufacturers are located)

http://www.SevenForums.com/tutorials/43216-installing-updating-drivers-7-a.html
If you update the drivers manually, then it's a good idea to disable the facilities of driver under Windows
Updates, this leaves ONE of Windows updates, but it will not install the drivers who will be generally
be older and cause problems. If updates offers a new driver and then HIDE it (right click on it)
and then go look for new ones manually if you wish.
Stop Windows 7 to automatically install device drivers

http://helpdeskgeek.com/Windows-7/stop-Windows-7-from-automatically-installing-device-drivers/
How to disable automatic driver Installation in Windows 7 / Vista

http://www.AddictiveTips.com/Windows-Tips/how-to-disable-automatic-driver-installation-in-Windows-Vista/
Turn off Windows Update Device Driver search prompt in Windows 7 / Vista (for professionals,
Ultimate and Enterprise)

http://www.AddictiveTips.com/Windows-tips/disable-Windows-Update-device-driver-search-prompt/
==========================================
Tests of memory intercept all errors such as memory do not match (possible even for sticks
seemingly identical) and when the faster memory is placed in system behind more slowly
memory. So it is best to also exchange the rods in and out to check these even if all memory
tests fail show a problem.
To test the RAM here control - run 4 + hours or so.<-- best="">
www.memtest.org
For Vista/Windows 7 memory diagnostics tool
Start - type in the search-> memory box - find top - click - right Memory Diagnostics tool
RUN AS ADMIN follow the instructions
Windows Vista: How to scan / test your memory with Windows Vista memory or RAM
Diagnostic tool

http://www.shivaranjan.com/2007/11/01/Windows-Vista-how-to-scan-test-your-RAM-or-memory-with-Windows-Vista-memory-diagnostic-tool/
How to run the diagnostic tool memory in Windows 7

http://www.SevenForums.com/tutorials/715-memory-diagnostics-tool.html
I hope this helps.
Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle=""><- mark="" twain="" said="" it="">

Problem event name: BlueScreen OS Version: 6.1.7600.2.0.0.256.1 locale ID: 1033
It happens almost every day and idk what to do, please help!

Signature of the problem:
Problem event name: BlueScreen
The system version: 6.1.7600.2.0.0.256.1
Locale ID: 1033

More information about the problem:
BCCode: 119
BCP1: 0000000000000001
BCP2: 000000000000003D
BCP3: 0000000000000006
BCP4: 0000000000000006
OS version: 6_1_7600
Service Pack: 0_0
Product: 256_1

Files helping to describe the problem:
C:\Windows\Minidump\081112-18486-01.dmp
C:\Users\Richard\AppData\Local\Temp\WER-34975-0.SysData.XML

We need the DMP file because it contains the single record of the sequence of events that led to the accident, what drivers have been loaded, and what has been loaded.
If you are overclocking STOP
You may be able to get the DMP files without crashing by booting in SafeMode (F8) with networking.
Please follow these instructions to collect data against crashes and upload them here, to your Skydrive or a service such as Rapidshare file sharing.
http://www.SysNative.com/forums/showthread.php/68-blue-screen-of-death-%28BSOD%29-posting-instructions-Windows-8-7-amp-Vista?p=303&viewfull=1#post303
http://SysNative.com/0x8/BSOD_Windows7_Vista_v2.64_jcgriff2_.exe
To allow us to help you with symptoms BSOD on your computer, download the contents of your folder "\Windows\Minidump".
The procedure:
* Copy the contents of \Windows\Minidump to another location (temporary) somewhere on your machine.
* Zip up the contents of this folder
Please, upload to skydrive or a file sharing service and put a link to them in your next post.
Go to start > search/run > cmd > msinfo32 and include it in the upload
To ensure the minidumps are enabled:
* Click Start, in the search box, type: sysdm.cpl, press ENTER.
* On the Advanced tab, click Startup and recovery... Settings button.
* Make sure that automatically restart is unchecked.
* Under the writing debugging information header, select image partial memory (256 KB) in the list box drop-down (varies from 256kb).
* Ensure to that small Dump Directory is listed as % systemroot%\Minidump.
* OK your way out.
* Reboot if changes have been made.
http://www.SysNative.com/forums/showthread.php/325-BSODs-but-no-dump-files
http://www.osronline.com/article.cfm?article=545
Please also go to start > run > msinfo32 and record the results. Send it with the DMP files, thank you.

Error with the listener. ORA-00132: error of syntax or network name not resolved
Hi all

I get a strange error while trying to start the db.

SQL > startup nomount
ORA-01078: failure in the treatment of system settings
ORA-00119: invalid specification for the system LOCAL_LISTENER parameter
ORA-00132: error syntax or network name not resolved "LISTENER_TSS2A076N3."

Listener is running.

Here is my file Listener.

listener.ora.tss2a119n1 # Network Configuration file: / oradb/oracle/product/asm /.
11.1.0/network/admin/listener.ora.tss2a119n1
# Generated by Oracle configuration tools.

LISTENER_TSS2A076N3 =
(DESCRIPTION_LIST =
(DESCRIPTION =
(ADDRESS = (PROTOCOL = TCP) (HOST = xxxx.xx.xx.xxxx.net)(PORT =)
(4329)(IP = FIRST))
(ADDRESS = (PROTOCOL = TCP) (HOST = xxxx.xxx.xx.xxxx.net)(PORT =)
(4329)(IP = FIRST))
)
)

SID_LIST_LISTENER_TSS2A076N3 =
(SID_LIST =
(SID_DESC =
(GLOBAL_DBNAME = pnet01r_dgmgrl)
(SID_NAME = pnet01r3)
(ORACLE_HOME = oradb/oracle/product/db_1/11.1.0)
)
(SID_DESC =
(SID_NAME = + ASM3)
(ORACLE_HOME = oradb/oracle/product/asm/11.1.0)
)
)

Well, I'm trying to install data guard and this error I get on the standby server. The listener preceding is also the same.

Help, please.
concerning I'm not very clear on that... Kindly explain... what exactly needs to add, delete or modify.
Follow the link, it shows why and how LOCAL_LISTENER needs a specifications in the tnsnames.ora. You don't have a problem with the native listener.
Werner

HP Pavilion M4-1002TX: network name not displayed in my HP pavilion m4-1002TX
Hi you
Really need your help. My lappy since there are 2 weeks unable to connect on behalf of the office network. The name of the network is invisible. Connection are available but not connected. I tried all the HP PC, troubleshooting wireless network and internet in vain.
I have no idea right now. Some laptop HP with the same model at the office have a same problem.
Other network name are appear in the list & also can direct connect using the usb cable.
Please help me.
OK after the reset of the modem the network name does not always show upward?

Problem event name: BEX, error message
Hello
I'm working on a tool that is used mainly to replace the location of the batch of Crystal XI report data source, this tool works normally, but trying to change the location of the data source of some reports and mainly when a loop on the tables in the report to replace the source of data for each table, a Bex error is triggered
In addition, DEP is disabled with the command ==> bcdedit.exe/set {current} nx AlwaysOff
so
I need to know what is BEX error?
Why this error is generated when you work with some reports not all?
How can I disable or circumvent this problem?
Thank you very much.
Hi m2.
Thanks for giving this information. It is indeed useful.
Done BEX reference except for buffer overflow. For more information on BEX, please visit http://technet.microsoft.com/en-us/library/cc738483 (WS.10) .aspx
Could you please provide more information? I've included a snapshot of a BEX error for your reference. Please view the snapshot so that I can get you the resolution.
Signature of the problem:
Problem event name: BEX
Application name: iexplore.exe
Application version: 7.0.6001.18000
Application timestamp: 47918f11
Fault Module name: ntdll.dll
Fault Module Version: 6.0.6001.18000
Fault Module Timestamp: 4791a7a6
Exception offset: 00087ba6
Exception code: c000000d
Exception data: 00000000
The system version: 6.0.6001.2.1.0.768.3
Locale ID: 1037
Additional information 1: fd00
More information 2: ea6f5fe8924aaa756324d57f87834160
Additional information 3: fd00
Additional information 4: ea6f5fe8924aaa756324d57f87834160
Take care.
Kind regards
Cedric M
Microsoft Answers Support Engineer

Windows Media Player - the problem event name: BEX
Hi meet Microsoft
I have Windows 7 Ultimate 32 bit
I tried to read an AVI on Windows Media Player, but I get an error saying that Windows media that Layer has stopped working.
Here are the details of the problem
Signature of the problem:
Problem event name: BEX
Application name: wmplayer.exe
Application version: 12.0.7600.16667
Application timestamp: 4c7dc5a1
Fault Module name: StackHash_0a9e
Fault Module Version: 0.0.0.0
Fault Module Timestamp: 00000000
Exception offset: 07951710
Exception code: c0000005
Exception data: 00000008
The system version: 6.1.7600.2.0.0.256.1
Locale ID: 1033
Additional information 1: 0a9e
More information 2: 0a9e372d3b4ad19135b953a78882e789
Additional information 3: 0a9e
Additional information 4: 0a9e372d3b4ad19135b953a78882e789
Help, please
Thank you
OK, I might have already solved my problem. I tried only to open AVI justONE file. I have other AVI files and then I tried to open WMPlayer worked. I did the AVI WMPlayer could not play. I checked this with VLC player AVI fiel, and showed what VLC was weird. I guess that the AVI file has been corrupted.
Thanks for your help though, especially this program MalwareBytes.

Problem signature: problem event name: BlueScreen OS Version: 6.1.7601.2.1.0.768.2 locale ID: 1033
I have a problem in my laptop,

This is the detail of the problem.

Signature of the problem:
Problem event name: BlueScreen
OS version: 6.1.7601.2.1.0.768.2
Locale ID: 1033

More information about the problem:
BCCode: c000021a
BCP1: FFFFF8A000099840
BCP2: 0000000000000000
BCP3: FFFFFFFFC0000001
BCP4: 0000000000100620
OS version: 6_1_7601
Service Pack: 1_0
Product: 768_1

Hello
STOP: 0XC000021A
Can be a difficult problem to solve, and you indeed need a technical help in a real store of the computer
(not the leeks and the glances at a BestBuy or other BigBox stores) or system manufacturer support.
Cause
This error occurs when a subsystem of mode user, such as WinLogon or the Client Server Run-Time Subsystem (CSRSS), irremediably compromised and security can not be guaranteed. In response, the operating system goes into kernel mode. Microsoft Windows cannot run without WinLogon or CSRSS. Therefore, it is one of the rare cases where the failure of a user mode service can stop the system.
Incompatible system files can also cause this error. This can happen if you restored your hard disk from a backup. Some backup programs may skip restoring system files which they determine are in use.

Solve the problem
Run the kernel debugger is not useful in this situation because the error occurred in a user mode process.
Resolve an error in the user-mode device driver or system, third-party application service: Because the bug 0xC000021A control occurs in a user mode process, the most common culprits are third-party applications. If the error occurred after the installation of the new or updated device driver or service system, third-party applications, the new software should be removed or disabled. Contact the manufacturer of the software on a possible update.
If the error occurs during the system startup, restart your computer, and then press F8 to character-based menu that displays the choice of operating system. In the Windows Advanced Options menu that results, select the last known good Configuration option. This option is most effective when a pilot or a service is added at a time. If the error is not resolved, try to manually remove the offending software. If the system partition is formatted with the (FAT) file allocation table, use a MS-DOS boot disk to access the hard disk of the computer. If the system partition is formatted with the NTFS file system, you may be able to use Safe Mode to rename or remove the defective software. If the defective software is used as part of the start-up procedure of the system Safe Mode, you must start the computer by using the Recovery Console to access the file. If a room newly installed if material is suspected, remove it to see if that fixes the problem.
Try running the emergency recovery disk (ERD) and allow the system to repair any errors that it detects.
Solve a problem of file system do not match: If you have recently restored your hard disk from a backup, check if there is an updated version of the backup/restore program available from the manufacturer. Make sure that the latest Windows Service Pack is installed.
STOP: 0XC000021A<-- read="" this="">
* 1314.html http://www.faultwire.com/solutions-fatal_error/Status-System-Process-terminated-0xC000021A-
-----------------------------------------------------------------------

Look in the Event Viewer to see if something is reported on those.

http://www.NirSoft.NET/utils/my_event_viewer.html
-------------------------------------------------------------------------

It's my generic bluescreen convenience store - you can try Mode safe mode as suggested in article
above - repeatedly press F8 that you start. Disks of Vista are probably necessary - if you do not have to try
repair, you can borrow a friends because they are not protected against copying. You can also buy the physical
discs of the machine system good cheap that you already own windows (you will need to reinstall
If necessary). You can also repair disks on another computer.
Here are a few ways to possibly fix the blue screen issue. If you could give the blue screen
info that would help. Such as ITC and 4 others entered at the bottom left. And all others
error information such as codes of STOP and info like IRQL_NOT_LESS_OR_EQUAL or PAGE_FAULT_IN_NONPAGED_AREA and similar messages.
As examples:
BCCode: 116
BCP1: 87BC9510
BCP2: 8C013D80
BCP3: 00000000
BCP4: 00000002
or in this format:
Stop: 0 x 00000000 (oxoooooooo oxoooooooo oxoooooooo oxooooooooo)
Tcpip.sys - address blocking 0 x 0 00000000 000000000 DateStamp 0 x 000000000
It is an excellent tool for displaying the blue screen error information
BlueScreenView scans all your minidump files created during "blue screen of death," collisions
Displays information on all the "crash" of a table - free

http://www.NirSoft.NET/utils/blue_screen_view.html
BlueScreens many are caused by old or damaged, in particular the video drivers drivers however
There are other causes.
You can do mode if necessary safe or the Vista DVD command prompt or
Options recovery if your system is installed by the manufacturer.
How to start on the System Recovery Options in Windows 7

http://www.SevenForums.com/tutorials/668-system-recovery-options.html
You can try a system restore to a point before the problem started when one exists.
How to do a system restore in Windows 7

Look at the sites of the manufacturer for drivers - and the manufacturer of the device manually.

http://www.SevenForums.com/tutorials/43216-installing-updating-drivers-7-a.html
How to disable automatic driver Installation in Windows Vista - drivers

http://www.AddictiveTips.com/Windows-Tips/how-to-disable-automatic-driver-installation-in-Windows-Vista/

http://TechNet.Microsoft.com/en-us/library/cc730606 (WS.10) .aspx

-------------------------------------------------------------------------
How to fix BlueScreen (STOP) errors that cause Windows Vista to shut down or restart
quit unexpectedly

http://support.Microsoft.com/kb/958233
Troubleshooting Vista Blue Screen, error of JUDGMENT (and Windows 7)

http://www.chicagotech.NET/Vista/vistabluescreen.htm
Understanding and decoding BSOD (blue screen of death) Messages

http://www.Taranfx.com/blog/?p=692
Windows - troubleshooting blue screen errors

http://www.SevenForums.com/tutorials/681-startup-repair.html
How to start on the System Recovery Options in Windows 7

http://www.SevenForums.com/tutorials/668-system-recovery-options.html
How to create a Windows 7 system repair disc

http://www.SevenForums.com/tutorials/2083-system-repair-disc-create.html
I hope this helps.
Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle="" -="" mark="" twain="" said="" it="">

Get CellularNetworkInfo networkinfo problem network name.

Similar Questions

Maybe you are looking for