Get "communication error with kernel" message when you try to run a virus scan program

Get "communication error with kernel" message when you try to run a virus scan program

Hello

What antivirus do you use?

Follow the steps in the article mentioned below and check if this solves the problem.


The error message "error communicating with kernel":

http://KB.eset.com/esetkb/index?page=content&ID=SOLN2280

Tags: Windows

Similar Questions

  • Message when you try to upgrade or install a program. "A network error occurred whtile attempted to read from the file:

    Receive the following message when you try to upgrade or install a program. "A network error occurred whtile attempted to read from the file?: MSI

    * original title - cannot open files with .msi extension *.

    You try to open this leave a link online? If yes I would like to try and save the MSI on your desktop and then try to open.

  • 5 error message when you try to run gimp - 2.18.16 - Setup could not create the directory

    5 error message when you try to run setup.exe gimp - 2.18.16 after downloading... it reads:
    Setup could not create the directory
    c:\Users\DEBSWO~1\AppDate\Local\Temp\is-IKDP5.tmp ".
    Error5: Access denied
    In the Temp folder under Security I have:
    'SYSTEM' with full control
    "Administrators" with full control
    "Username" with full control
    All of which is listed in the permissions, but the box for'Include the permissions that can be inherited from the parent to this object "below is checked but not really dim so that you cannot check or uncheck the box?"
    The two latest downloads gave the same error message.

    Thank you for your time.
    Debbie

    I suggest you do this:

    1. click on the start planet.
    2. type cmd.exe in the search box.
    3. press on Ctrl + Shift + Enter
    4. click on "run as Administrator".
    5. type the following commands exactly and press ENTER after each:
    takeown /f "%Temp%" / r

    Cacls "%Temp%" / t/c/g "%nom user %": F System: F

    (Enter Y when you are prompted "Are you sure?")

  • get cannot load the metafile message when you try to download adobe readerx for windows 7 professu international =

    get cannot load the metafile message when you try to download adobe reader x

    You receive this message during the download or installation ?

    If during the installation, try the Installer http://get.adobe.com/reader/enterprise/ offline

  • HP Officejet 6500 E709n: HP Officejet 6500 E709n hangs with mac (Mavericks) when you try to save changes to scan destination

    HP Officejet 6500 E709n hangs with Mac (Mavericks) when you try to save changes to scan destination. That's all!

    What is the problem of HP?

    Hello

    What application you want to scan to?

    Try to install the HP Easy Scan software, it will be installed in the Applications folder:

    https://iTunes.Apple.com/us/app/HP-easy-scan/id967004861?MT=12

    You see a difference using?

  • I downloaded creative cloud, Dreamweaver and Muse.  I get the following error message when you try to run Dreamweaver: '... Unable to start properly.  0xc000007b'. Muse started ok.

    I downloaded creative testing Cloud, Dreamweaver and Muse.  I get the following error message when you try to start the Dreamweaver application '... Unable to start properly.  0xc000007b'. Muse starts without a problem.  Is there something wrong with the download trial of Dreamweaver or is it my computer?  I downloaded the Windows 7 premium, Intel, processor Pentium B940 2.0 ghz, 4 GB ram, 64-bit operating system.

    ... 07 b problems http://forums.adobe.com/thread/1355374?tstart=0

  • Get error 0 x 80070003 when you try to run Fix - It.

    Fix, that it does not start and I get error 0 x 80070003. XP SP3 and Windows Security Essentials running.

    Hi Ted,

    Exactly what Fix - it by train are you running and what's - the site would help (or you're talking about the downloaded version)?  Why are you trying to run Fix - it - what is the underlying problem , not to mention that the problem with Fix - it?  If this problem has an error message, please report exactly Word for word including all codes.  Please do the same for the error message above as well.

    Although designed to update problems, maybe will help the following articles of this error code: http://support.microsoft.com/kb/956705 and http://support.microsoft.com/kb/910336.

    See also: error message when you try to download the updates on the Microsoft Windows Update Web site or from the Microsoft Update on a Windows XP computer's Web site: "0 x 80070003".
    http://support.microsoft.com/kb/916248.

    The following were also suggested to: http://www.vistaheads.com/forums/microsoft-public-windowsupdate/437368-updating-kb892130-error-0x80070003.html (although again, not for the reason you mentioned, but it may work as she is bound).

    1. stop the service automatic updates, clear the contents of the data store
    Download the files and restart the automatic updates service.
    Stop the automatic updates Service.
    Click Start, choose Run, in the run box type services.msc.
    Click OK.
    Right-click the automatic updates service.
    Select Properties.
    Under Service status, click on stop.
    Click OK.

    2 remove the contents of the DataStore and Download files.
    Click Start, choose Run, in the run box, type %windir%\SoftwareDistribution
    Click OK.
    Delete the content of the files, the data store and download (but) NOT the files themselves

    3. start the Service automatic updates
    Click Start, choose Run, in the run box type services.msc.
    Click OK.
    Right-click the automatic updates service.
    Select Properties.
    Under Service status, click Start.
    Click OK.

    I hope this helps.

    Good luck!

  • Error when you try to run Quicken 2011: this program is not supported under XP

    Win XP pro - Quicken 2011

    I am running win XP pro. When you try to run Quicken 2011 I get an error message: this program is not supported under XP.  What I do toget Quicken supported?

    For help on Quicken, I recommend posting your question in the community live Quicken .  The people there can help you better as we can in this forum of Windows. Boulder computer Maven
    Most Microsoft Valuable Professional

  • I get an error 0 x 80244019 when you try to update on express update

    This error keeps popping up when I try to update on the custom or express update error code is 0 x 80244019

    You cannot download updates when you access the Windows Update Web site from a Windows XP-based computer that is behind a firewall or a proxy server
    http://support.Microsoft.com/kb/896226

  • get the error (0 x 808005) when you try to change the backup settings

    need to change backup settings I get an error (0 x 808005) how can I take care of this problem

    Hello conniealvarez,

    When you change the settings for a return to the top, when you get this message?  Here is a link to change the settings on a return to the top.

    Save:

    http://Windows.Microsoft.com/en-us/Windows-Vista/set-your-mind-at-ease-back-up-your-files-now

    Since suggest that the reverse will run successfully, where you store to the top (DVD, hard drive)?  Were you able to change the date/time of back ups for the last time with this computer?

    Thank you

    James

  • Error message when you try to connect a K8200 3D program to a K8200 3D printer.

    Site of the Lim has been no help.  Manage the msg of error complains of "no com4/com/port". "No serial port not defined" or words to that effect.  The program has connected previously but had other issues.

    Any suggestion would be appreciated.

    Edokus

    This seems to be a problem with the software that you use with your printer and not a Windows problem.

    Unfortunately, neither the manufacturer of the printer, Velleman, nor the manufacturer of software, Repetier, seems to have good management.  They both rely mainly on forums that are not particularly active.

    K8200 forums: http://forum.velleman.eu/viewforum.php?f=45

    Repetier forum: http://forum.repetier.com/categories/repetier-host

    RepRap forum: http://forums.reprap.org/list.php?267

    As near as I can make, your error message refers to a problem with the connection between your computer and the printer.  As explained in the online manual for the K8200, when you install the driver required a "USB serial port" named COMxx must have been created.  See http://www.k8200.eu/manual/printing/?c=002

    The next step is to install the Repetier-host software.  Interestingly, K8200 online manual says to install the version 0.84 of the software because it is good enough, and "we are working on compatibility of newer versions."  Unfortunately, this old version is no longer available directly from Repetier.  The current version is 1.6.2 and earlier versions 1.5.6 1.0.6 and 0.95F are available.  A post on the K8200 forum suggests that 0.95F works and provides a link from the k8200 site (the same link is on the main page of downloads K8200 (http://www.k8200.eu/support/downloads/).  See http://forum.velleman.eu/viewtopic.php?f=50&t=17955

    Assuming you have version 0.84 or 0.95F of the Repetier-Host is installed, you should start, go to "Printer settings" and Configure the software to use the "USB serial port" with the number created by installing driver.

    Screenshots which describes the process above are to the K8200 man page link above.

    If you've done all this correctly and still having the problem, I suggest you search/post on the K8200 forum: http://forum.velleman.eu/viewforum.php?f=49

  • Get the error (0 x 8078119) when you try to create a system image in Windows 7

    Original title: shadow copy volume
    Hello

    I currently have problems with creating a system image, because it comes back with the error (0 x 8078119) now I know it's, it's to do with the lack of disk space of 100 MB (startup disk or something like that) but with mine I have 62% of free space that is 63 MB available space for me (Please note the 100 MB drive for me is 102 mb)
    so I was wondering if anyone can help, because I had a virus before and ended up losing everything, that I don't really want to breed

    Hi Jugganourt,

    Please see the troubleshooting following thanks Divya R:

    Step 1: Check if the shadow copy Volume service is running.

    1. Click Start and type services.msc in the search box

    2. double-click on the Volume Shadow Copy Service.

    If you receive a Configuration Manager message, click OK.

    3. in the Startup Type list, clickAutomatic, and then click OK.

    4 services nearby.

    5 restart the computer.

    Step 2: Open Event Viewer to check the exact error message:

    Event Viewer is a tool that displays detailed information about the events important (for example, programs that don't start as expected or updates are downloaded automatically) on your computer. The event viewer can be useful when troubleshooting problems and errors with Windows and other programs.

    For more information, see:

    What are the information contained in the logs of the event (Event Viewer)?

    http://Windows.Microsoft.com/en-us/Windows7/what-information-appears-in-event-logs-Event-Viewer

    Check out this link to open the event viewer:

    Open event viewer

    http://Windows.Microsoft.com/en-us/Windows7/open-Event-Viewer

    Open event viewer and navigate to the following location: applications and services Logs\Microsoft\Windows\WindowsBackup\ActionCenter.

    Step 3: You can also generate a log file by following the instructions below and send us the details.

    Important: This section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click the following windows Help article.

    Back up the registry
    http://Windows.Microsoft.com/en-us/Windows7/back-up-the-registry

    1. Click Start-> Run-> type regedit.exe.

    2. navigate to HKEY_LOCAL_MACHINE NT\CurrentVersion\Asr, create a new key called LogFileSetting.

    3. under LogFileSetting, create a new DWORD value called EnableLogging.
    Right click on this value, click on edit and then type 00000001 (hexadecimal)
    or 1 (decimal).

    4. under LogFileSetting, create a new string value called LogPathName.
    Right click on this value, click on edit and then enter C:\asr.log.

    5. then, to reproduce the error. You should have a file called asr.log in c:\

    6 copy the content and after us.

    Thank you!

  • Someone at - he managed to get the "page not available" message when you try to download apps?

    I recently joined the Adobe Creative cloud, but when I try to download one of the applications I get a blank page with the message "page not available", I tried both THE 11 and 14 of Chrome, both with the same results. I've also temporarily disabled firewall/scanner virus and anti spam, but without result. I use the optimized UK Server?

    I think it's due to the interruption of the Adobe server / comms reset

    Any ideas?

    David UK

    I have not seen other reports of this problem.

    I suspect that you have a local network problem.

  • I get the "No. Drive Detected" message when I try to use the media Sonic program in XP?

    With this message, I get no choice of reader to choose the player not to "read" cd or dvd?

    Hi Mr. Benjamin,.

    1. don't you make changes before the show?
    2 do only when you use the media Sonic?

    We recommend that you download and run the Microsoft Fix and check if the problem persists.
    See your CD drive or DVD drive is missing or is not recognized by Windows or other programs

    If the problem is only with the sonic program, then try to reinstall the program and check the result.

    Visit our Microsoft answers feedback Forum and let us know what you think.

  • Open with is displayed when you try to run installed programs

    After that infection by AV Defender and Symantec virus cleaned, I'm unable to run any of my programs installed.

    Hello

    Just in case there are persistent pieces of malware here is the method of complete elimination.
    .exe question difficulty in the next message.

    Try Mode safe mode with networking - repeatedly, press F8 that you start.

    The best two methods allow scanners to run and/or AV.exe out of the way or removing.

    1.
    CTRL SHIFT ESC - task manager OR right click on the taskbar - task manager

    Process tab - complete the process on AV. EXE and continue with the uninstall Guide.

    If necessary use start - computer or Windows Explorer to navigate to

    C:\Program Malwarebytes Anti - Malware\mbam.exe or where it is installed - if
    necessary right click on the shortcut of Malwarebytes - Properties - tab - target line to see where it
    is installed.

    Right-click on it and rename it to ZZMbam.COM (or something different than now) and
    Double-click it, and then run it like this. You can rename it back later. Do the same with
    other programs according to the needs. Use this method to others as needed - NOT assume all
    a program deletes all or that it is no other malicious software.

    ---------------------------------------------------

    2.
    Another method is to use them:

    Use Process Explorer to "Suspend" the process will not stop

    Then use AutoRuns to delete the malicious program startup items.

    Now use UnLocker to delete the files in the malware.

    You may need to do a file at a time.

    Process Explorer - free
    http://TechNet.Microsoft.com/en-us/Sysinternals/bb896653.aspx

    AutoRuns - free
    http://TechNet.Microsoft.com/en-us/sysinternals/bb963902.aspx

    UnLocker - free (do not install the adaware Ebay)
    http://www.Softpedia.com/get/system/system-miscellaneous/unlocker.shtml

    AV.exe

    ==============================================

    The AV.exe malware goes by many names:

    XP Internet Security 2010, Antivirus 2010 Vista and Win 7 Antispyware 2010 are thugs
    antivirus, scams for you force to pay for them while they have no advantage at all.

    How to remove Vista Antivirus 2010 as well as the other varieties AV.exe.
    http://www.bleepingcomputer.com/virus-removal/remove-antivirus-Vista-2010

    RENAME this as necessary to allow them to perform: (use a different name with the extension .COM instead of .exe)

    It can be made repeatedly in Mode safe - F8 tap that you start, however, you should also
    Run them in regular Windows when you can.

    Download malwarebytes and scan with it, run MRT and add Prevx to be sure that he is gone.
    (If Rootkits run UnHackMe)

    Download - SAVE - go to where you put it-right on - click RUN AS ADMIN

    Malwarebytes - free
    http://www.Malwarebytes.org/

    Run the malware removal tool from Microsoft

    Start - type in the search box-> find MRT top - right on - click RUN AS ADMIN.

    You should get this tool and its updates via Windows updates - if necessary, you can
    Download it here.

    Download - SAVE - go to where you put it-right on - click RUN AS ADMIN
    (Then run MRT as shown above.)

    Microsoft Malicious - 32-bit removal tool
    http://www.Microsoft.com/downloads/details.aspx?FamilyId=AD724AE0-E72D-4F54-9AB3-75B8EB148356&displaylang=en

    Microsoft Malicious removal tool - 64 bit
    http://www.Microsoft.com/downloads/details.aspx?FamilyId=585D2BDE-367F-495e-94E7-6349F4EFFC74&displaylang=en

    also install Prevx to be sure that it is all gone.

    Download - SAVE - go to where you put it-right on - click RUN AS ADMIN

    Prevx - Home - free - small, fast, exceptional CLOUD protection, working with the other security
    programs. It is a single scanner, VERY EFFICIENT, if it finds something come back here or
    Use Google to see how to remove.
    http://www.prevx.com/   <-->
    http://info.prevx.com/downloadcsi.asp  <-- download="">

    Choice of PCmag editor - Prevx-
    http://www.PCMag.com/Article2/0, 2817,2346862,00.asp

    Try the demo version of Hitman Pro:

    Hitman Pro is a second scanner reviews, designed to save your computer from malicious software
    (viruses, Trojans, rootkits, etc.). who infected your computer despite safe
    what you have done (such as antivirus, firewall, etc.).
    http://www.SurfRight.nl/en/hitmanpro

    --------------------------------------------------------

    If necessary here are some free online scanners to help the

    http://www.eset.com/onlinescan/

    http://OneCare.live.com/site/en-us/default.htm

    http://www.Kaspersky.com/virusscanner

    Other tests free online
    http://www.Google.com/search?hl=en&source=HP&q=antivirus+free+online+scan&AQ=f&OQ=&AQI=G1

    --------------------------------------------------------

    Also follow these steps for the General corruption of cleaning and repair/replace damaged/missing system
    files.

    Run DiskCleanup - start - all programs - Accessories - System Tools - Disk Cleanup

    Start - type this into the search-> find COMMAND to top box and RIGHT CLICK-
    RUN AS ADMIN

    Enter this at the command prompt - sfc/scannow

    How to analyze the log file entries that the Microsoft Windows Resource Checker
    (SFC.exe) program generates in Windows Vista cbs.log
    http://support.Microsoft.com/kb/928228

    Run checkdisk - schedule it to run at the next startup, then apply OK your way out then
    turn it back on.

    How to run the check disk at startup in Vista
    http://www.Vistax64.com/tutorials/67612-check-disk-Chkdsk.html

    -----------------------------------------------------------------------

    If we find Rootkits use this thread and other suggestions. (Run UnHackMe)

    http://social.answers.Microsoft.com/forums/en-us/InternetExplorer/thread/a8f665f0-C793-441A-a5b9-54b7e1e7a5a4/

    I hope this helps.

    Rob Brown - MS MVP - Windows Desktop Experience: Bike - Mark Twain said it right.

Maybe you are looking for

  • after update to v10.11.6 my hotmail login is not recognized

    After the last Maverick v10.11.6 update my hotmail login is not recognized.

  • Equium A60: graphics issues and more

    Ive had so many probs with tis equium a60. It was overheating, stand by was not working and now the graffics were spoil! I rang this place recommended pcworld n they said try to format (large). anyway I restored it to factory settings while he was ex

  • Creating a GUI for use on an Ethernet network

    I design a data logger to record the voltage, current and temperature data to a string of battery backup is supported. The logger will be able to be read remotely via Ethernet. That said, I would like some advice about the graphical interface for the

  • HP Color LaserJet 3700dtn Prin: windows 7 HP printer computer

    I would like guidance on how to add the HP Color LaserJet 3700dtn printer to my computer to 64-bit windows 7 so that I can print documents on this subject. I tried to follow the directions of: Click to open devices and printers. Click Add a printer.

  • How to make a player available?

    I tried to open a file in My Documents, and I received the following message is displayed: "The drive or network connection that designates the shortcut (file name) is not available. Make sure the disk is properly inserted or the resorce network is a