Get date friendly String

Similar Questions

• Daylight Saving Format Date/Time String vs get time in seconds

  Hi all

  I have developed a real-time application using a cRIO 9074 which has two loops. The first gathers data and records the time using the module of ' string of Format Date/time ' with the following time sting: '%d/%m/%Y % H: %m ". The output is a sting with mouth/day/year hour: minute.

  The second loop Gets the cRIO time using the module "get Date/Time in Seconds ' and the output of timestamp is sent by a shared variable for an application that is running on a local computer.

  The problem started Sunday last with DST. With the help of MAX I am able to see that the time of cRIO is bad (1 hour less) and that him "automatically adjust clock for daylight saving time" is not checked and gray, so I am not able to change it.

  The time of the first loop by using the "Date and time Format string' returns the time elapsed between the cRIO (1 hour late), however the time of the second loop is OK. I have manually corrected time using MAX, so now the first loop is correct, and the second is now over an hour.

  Any ideas?

  Dear RavensFan, thank you very much for your answer.

  However, this was not the problem. Apparently the result with or without the element of DST is the same. I solved the problem, for now, by changing a parameter not on the function "get Date/Time in Seconds" but on the time stamp indicator.

  By right clicing the indicator and go to the display Format and the advanced editing mode, I have changed the Format string to a universal time container of this: %< %="" h:="" %m="">< t="" %="" ^="">< %="" h:="" %m=""><>

  Apparently the time from the 'get time in seconds' is still an hour longer, but now it is correctly displayed.

• Help for a date and time string in the format of get-date

  When you take a date / time string of an object:

  The format of the entry is a string and get-date doesn't seem to be able to convert to the

  a System.DateTime.

  I want to compare this value to 30 days so there are get-date ((get-date).adddays(-30))

  When I try the following, it seems to work then import it:

  (get-date - UFormat "%d/%m/%Y %T" ("2010-06-30 00:00:00" ""))

  If I add the following:

  "[datetime]" (get-date - UFormat "%d/%m/%Y %T" ("2010-06-30 00:00:00" ""))

  He can't convert it.

  Without the datetime component, when I try a superior test uses only the date

  the part as well:

  $Test = '2009-10-06 00:00:00.

  If ($Test - gt (get-date - UFormat "%T"("06/05/2010 00:00:00") %d/%m/%Y ""))

  {

  $Tested = 'Yes '.

  }

  On the other

  {

  $Tested = 'no '.

  }

  $tested

  Results in a Yes tentatives being earlier.

  In the script it returns all records where the date is after

  as 05 and ignore the year, month, and time.

  Any help with this would be greatly appreciated.

  Thank you

  This has to do with the 'culture' that you use in your PowerShell session.

  You can use the Get-Culture cmdlet to see that one you use.

  If you try

  [datetime](get-date -UFormat "%m/%d/%Y %T"("30/06/2010 00:00:00"))
  

  The parameter - UFormat produces a string and

  the cast is expected default mm/dd/yyyy format, for the part of the date.

  So, by reversing the month and day of your UFormat string - that has been corrected.

  BTW, I have attached the line because the SW forum do not have hooks.

  ____________

  Blog: LucD notes

  Twitter: lucd22

• Is there an easy way to get a Date/time string seconds?

  I have 2 strings of the format depending on whether I would like to convert in seconds (since 1900). I need this value to set the t0 in a field.

  Date: ' 30/06/2014 '.

  "Time: '16:06 ' 08."

  Is there a CVI function that will do this conversion for me? If not, is there an easy way to do it?

  Thank you!

  This code should do what you want:

  
  
  
  static time_t  calt;
  
  struct Shared  tm tm;
  
  public static char    msg [64];
  
  public static int     AA, mm, DD, hh, mn ss;
  
  strcpy (msg, ' 2014/06/30 16:06:08 ');
  Extract the date/time string component
  
  Scan (msg, "%d [x] %d [x] %d [x] %d [x] [x] %d %d", & mm, dd, and yy, & hh, & mn, &ss);)
  Transfer to a struct tm components
  
  TM.tm_hour = hh;
  
  TM.tm_min  = mn;
  
  TM.tm_sec  = ss;
  
  TM.tm_year = yy - 1900;
  
  TM.tm_mon  = mm - 1;
  
  TM.tm_mday = dd;
  Obrtain calendar
  
  CALT = 0;
  
  CALT = mktime (&tm);)
  
  

• How to get data from HTTP connection string?

  First of all, I have a PHP page that establishes the connection and the query to the database to get a random string in the database and printing on the page, say the name is: getString.php, such as every time that you refresh the page, the string that is printed on this page can be (or most of the time) different. The next step I wanted to do is to get this string and put it on my application for Blackberry, and I do not know how.

  I use WAP2 for the connection, and I copied the code that is shown here:

  http://www.BlackBerry.com/knowledgecenterpublic/livelink.exe/fetch/2000/348583/800451/800563/What_Is...

  So once the connection is established, how can I get the string content in this page? I had the url of http://mydomain.com/getString.php

  Thank you!

  Why don't you use a StringBuffer?

• Apparent problem with OpenG Get Data Name_ogtk.vi

  The data Name_ogtk.vi Get OpenG is a function that takes a data Structure and returns the name of this structure if the Data Structure has a name.

  I use it in my Configure.vi. Configure.VI takes several data structures and saves / loads to an INI file. The name of the section in the INI file is the same as the name of the Data Structure. When loading, Configure.vi takes the name of the data structure to load and locate the Section in the INI file with the same name and then uses the items listed in the INI section to load the Data Structure with the data values.

  In my case, I have 3 sections. Two of the sections, 1 Servo and Servo 2 derive from the same Type definition. I am trying to load 3 of the attached INI file data Structure. The Config.ini in the system file has been generated by the backup function Configure.vi. I'm passing in the routine of the load, 3 Data Structures, each with unique names. I have an explicit call to get the data for Servo 1 Name.vi and 2 Servo. But the probes on the output of the Name.vi of data values get two return to the same 'Servo 1' same string if sensors on the Structure of data entries that clearly indicate them the unique names of the "Servo 1" and "Servo 2" respectively.

  It seems that the 2nd Get data name returns the name of the Data Structure 1 by mistake. If anyone can check this?

  Does anyone know how to fix Get Data Name.vi so that it returns the appropriate data Structure names?

  Thank you.

  I was able to reproduce it and I show here as an oddity to force entry to the variant on the primitive flat string Variant.

  Basically, if you have more than one cluster with content command to match the type and order wired directly to this function, it returns the flattened string which is first to each call.  The wires must be wired without before converting to alternative, if you have points of constraint.

  This only happens if you feed directly the input varying both and get the stress points.  If you are using a variant is not the case.

  I found that this occurs if the cluster is of type defined, and it does not occur for constants.  I didn't try other controls.  I'll be honest, I'm usually used to constrain to the Variant.  I'll be more careful in the future!

  ----

  so convert to first variant will solve your problem.  In addition, if you leave the entry of the section name of the variant config openG write screw unwired, he will take the name as it is the research of the control, you did, so you need not the name of data Get there at all.

  An excerpt from 2009.  as - is equal to true.  The bunches are each a dbl and a bool, but each FP different controls.

  

• How to fix or get data off Mac Pro with display/restart issues

  Hi, my early 2008 Mac Pro running El Capitan suddenly started to show lines all over the screen, then it restarted, displaying an error message and since then he's been stuck in a reboot loop never get past the progress bar and with very distorted display. Two questions:

  (1) any solution to this? It is an old machine, worked great so I would like to continue using it if possible, but do not want to put money in it at this stage.

  (2) what is the best way to get data out of the two internal drives to the machine on my Mac Air? I need to access the files on it, also like his 2 x 1 TB hard drives I will not be able to transfer the data on Air, but you will need to use them as external drives.

  Help appreciated!

  Get a dock like this

  http://www.felinediabetes.com/FDMB/forums/feline-health-the-main-forum.28/

  and take the readers on the Mac Pro and put them in the dock and connect to new mac via USB

  You can also get an enclosure that accept disks 3 1/2 in.

  In addition, you can get a bolt of lightning > FireWire adopter and connect the two Macs via FireWire and start the old mac in target disk mode

  How to use and troubleshoot disk mode target FireWire - Apple Support

  The error message say? Problem could be the graphics card bad or maybe bad memory.

  If you open the side cover are all diagnostic lights on?

• How to get data from excel

  Hello world

  How can I get data from excel inside my program? I'm using labview 8.2. I have tried to find the solution for this but seems that the solutions are not suitable. Can someone help me? Thank you.

  Hi jieah,

  Inside of the attachment nijams don't you see this?

  read_excel_values. LLB

• Office toolkit 'excel get data' cannot read anything else of integers?

  I use LabVIEW 2009 and can not get LabVIEW to read non-entiers to a worksheet.  In the attached example, I put a breaktpoint after the new report vi, and and when it hits at this breakpoint I put a number as 1,234 in cell A1, and then continue execution.  But the 'data' outputs always return an integer value.  Even tried to change the format of the output of the data field.  I also tried to replace this with vi (LDM) Excel Get Data in the folder of the Toolbox, but got the same result.

  When I tried the same thing in LabVIEW 8.0 it worked.  No idea what I am doing wrong?  :-)

  Thank you

  -Bill

  Your meter is complete after you have changed the type of indicatpr, then you can get good results.

• Y510 unable to get data from the camera.

  Hello

  I have a Y510 with Windows Vista 32 bit, 3 GB RAM, only 5 weeks. I get this message when I try to use Veriface, "unable to get data from the camera. The camera may have been disconnected or busy. I reinstalled Vista of the State in which the laptop came, but it does not work. I also updated the bios and install other updates were available. I would appreciate any advice.

  Thank you

  Peter

  I wish it was as easy as press Fn + Esc, I looked through an another Y510 our office and managed to find a process that must be set to Auto, the process is KtmRm. This process cannot be disabled, handicapped, or on a time delay, it must be AUTOMATIC.

• date/time string

  Hello

  I would like to retrieve information about the last use (date and time) of a user, but I don't know how.

  In my program, the user enters the name of the person they are looking for. The person sought may be used multiple times in a day, or even in the software of the year Labtech or Adam. I would like to retrieve the date and time of the last use of the program for the person.

  I try with the "format date / Time string" but it returns me the same date of my tests.

  Do you have an example

  Thank you

  
  

• get date and time seconds

  I am using get date time in seconds, the function to send the date and time to a sub vi where I can use it to calculate the time difference in timestamps of waveform and the hour when he began to get the time in seconds. So I wanted to know if I pass this value to a sub - vi will be this value constantly updated in the sub - vi or it will remain constant until the sub - vi is finished.

  Yes it will remain constant because the time was read only once, to hand.  Any value is passed to the Subvi remains the same.  If you want once updated, you must put the function get Date/time inside the Subvi.

• Getting data from the nodes of event data

  Hi all

  I have a while loop with a Structure of the event and a Structure of case inside. The Structure of the event a lot of cases, and each of them is controlled by a different object (buttons, sliders, graphics, etc.). Sometimes, I have to use data from the nodes of event data to power a Business Structure that works like a State Machine in my code. To clean the block diagram, I want to 'export' data nodes using a single wire event data, but this is not possible because there is a conflict of data, since I get data of CtlRef in one case and Coords in others (for example).

  To resolve this problem, I'm feeding a beam to create a cluster and feed it to the box Structure data. However, the process is so painful, because I have to feed the Bundle function with constants of all sorts of data connected to him.

  Find attached an example. It is not the actual code but shows what I have to do.

  Thank you

  Dan07

  Why you do not pass a Variant to the structure of the case. In your case case simply make a variant of the appropriate data that you want to pass. I guess the case appropriate business structure will be to get called for the event. Given that you need to know the data type this case awaits can use the variant data VI and now you have the data you want.

• date/time string tabs

  Hello!

  I have a problem with the date/time string format VI. I would like to define the date and time with a tab to see the date and time in different columns so when I opened the data written in excellent... but I can´t! I ve tried with \t in the bar code backslash... (% d/%b\t%H:%M:%S%2u), also with concatenate strings with a constant of the tab in the middle... (as illustrated in attached piece) but the extent of my file the tab written as \09 (14/May\0911:00:20.25) s. The strange thing is that when I use \s (space code) it works fine... Why does only not with the tabs?

  Thank you very much for your answers!

  Hi Mia,.

  as I have LV8 + at the moment I can't dig deep - can someone else check this Express VI (stay away from them )

  You can use simple 'write in the text file' calls instead, just use 'picture to a worksheet string' on your data. That's what I'd do... (Express screws are nice start using LabView or quickly write code running - but they hide all the interesting stuff and won't provide any flexibility for special needs!) And they always need conversion into "dynamic data", which also hides the user's information. Did I mention I don't like screws Express?)

• Can all help with VI to get data (HEX) serial number and write in the text file

  Hello I am struggling with this problem for 2 months... They get help from different I thought I solved the problem, but of no use yet I stand on zero

  Problem: I need to get data on USB high speed HEXAGON shaped (coming in hexadecimal and be stored in the text file to the hexadecimal format as each hexadecimal value online different I'll also to attach the file)

  Get us ASCII on series or VISA read but when trying to convert to hex as shown in text file making it slower to deal with code, I know that my VI will have to improve more... I'm waiting for suggestions

  Need urgent help...

  Thanks in advance

  Hi Ali Afzal,.

  I think that the attached example can work for you. If not, then try the solution with sending the data to a parallel running the loop and store it there.

  Mike